Re: Routing download to SAP ME from ECC

Hello Friends,
When a routing for a material from SAP ECC is sent again to SAP ME, it creates a new version of routing.
Is it possible to make a check during routing download if a routing with the same number exists in ME or not. And if it exists then will it be possible to stop it from going to SAP ME as a new version?
Will it be practical to do so?
Would be thankful for your reply.
Regards,
Srinivas

Hi Srinivas,
I would expect the system to uprev the routing only if there is a difference between the existing routing and the incoming request and in accordance with setup of ERP Field Maintenance. Are you sure that you re-import exactly the same routing, with no changes? If so, I guess it needs a deeper investigation within a support ticket.
Regards,
Sergiy

Similar Messages

Error while downloading the object u201CDNL_CUST_PROD0u201D from ECC to CRM

Hi All,
I am trying to download the object u201CDNL_CUST_PROD0u201D from ECC to CRM. However it ended up throwng an error. Below are the error details:
The following Errors/Warnings occured. Do you want to continue?
Please read the OSS Note no. 212666 (QUEUE_ALREADY_EXITS:R3AI_DNL_CUST_PROD0)*
DNL_CUST_PROD0: Object will not be loaded
After getting the above error I deleted the already running instance and again ran it. But when I again ran it, it gave me the same error. So I checked for the entries in Outbound queue of ECC system. But couldnt found any entry.
Please help me fixing the issue.
Thanks in Advance.
Cheers,
Rj

Hello RJ,
Check CRM I /B and O / B (txn:SMQ2 and SMQ1) and also R/3 I /B and O / B queue, for the presence of
R3AI_DNL_CUST_PROD*.
Also, abort the running load in txn:R3AM1 for object DNL_CUST_PROD0.
Then try to re-load the object.
I do not see any other reasons for the above error message.
Best Regards,
Shanthala Kudva.

Mass download of condition records from ECC to CRM

Hi Team,
We need to download many condition records from ECC to CRM. We are doing a request download but it takes lot of time. Is there a way to do a mass download of condition records form ECC to CRM.
Regards,
Jan.

Hi Robert,
We have all the articles in CRM but the prices are not matching for 2000 articles. Kindly suggest us in doing a mass download of the condition records for those 2000 articles.
Regards,
Jan

Downloading Material Master data from ECC to CRM

Hello friends, I am working in CRM 5.0., I am finding difficulty in downloading Material master created in ECC to a Product Master in CRM. Can you please tell me how to use Customizations to download the material master to product master.

Hi Rghunandan,
To carry out the product replication from ECC to CRM,you need to carry out the foll steps.
First download the customizing objects using R3AS
DNL_CUST_PROD0 u2013 Material number conversions
DNL_CUST_PROD1 u2013 Product : Categories
DNL_CUST_PROD3 u2013 Material : R/3 sales status
DNL_CUST_SPROD u2013 Sales product item
DNL_PLANT - Plant
To download products foll the steps below
1.Defining Product ID Settings -COMCPRFORMAT
Cross-Application Components  SAP Products  Basic Settings  Define Output Format and Storage Form of Product Ids
This activity describes how to synchronize the product Ids in the CRM system and the R/3 system.
The material master length is R/3 is defined in transaction code OMSL and is set to 18. (also check note no. 545824)
2.Make sure that CRM item categories and R/3 item categories are the same.
In CRM, item categories and item category groups are seen via
Customer Relationship Management  Transactions  Basic Settings
3.Selecting specific objects for replication : R3AC1
Use adapter object MATERIAL
Use filter settings tab and specify the material or a range of products you want to download .Use atble name MARA,field MATNR use an approriate operator and mention theproduct you want to downlaod.
4.Replicate Materials : R3AS
mention the adaptor object Material and execute
Regards
Itty

SAP Upgrade from ECC 5.0 to ECC 6

Hello All,
We are planning for an upgrade from ECC 5 to ECC 6. As some obsolete statements like "Use of header line" is no more supported in ECC 6, do we need to manually change in all custom programs and FMs? Or is there available a tool to do so? or will SAP as part of the upgrade do the necessary. Because this is a huge effort
Thanks in advance for your response
Anirban

Hi,
It has to be manually done for each and every program.
Probably your company can check if there are any third party vendor tools that does the conversion, but anyways someone has to manually check the programs and test all of them.
Regards,
Subramanian

Request Download for Master Data from ECC to CRM resulting in "Wait" Status in R3AR3

Hi All,
I have created request download in R3AR2 transaction to download master data for a particular Business Partner from ECC to CRM.
But after I execute the request in R3AR4 transaction and check its status in R3AR3 transaction, it always states as "Wait".
Please help me as to how to resolve this issue.
Thanks in advance,
Shubham

Hi Shubham,
Please check the queues in SMQ2 and what status they are showing?.
Thanks,
Faisal

Downloading Vendors with Zrole from ECC

Hi Gurus,
I know the process of downloading vendors from ECC to CRM. now I have created a Zrole for vendors in CRM, now I want to download vendors with this new role. I have checked the PIDV settings, there is no option. also checked the FM Z_PI_BP_ROLE_MAP_DE_EIOUT for customer role mapping. Is there any way to downlaod Vendor with Zrole?.
Thanks,
S Reddy

Hi Reddy,
Your answer, will be very helpfully for me. How you solved it?
Thanks,
Alberto.

WCF-SAP Adapter throwing errors after SAP Upgrade from ECC 5 to ECC6 Release 640 to 700

Hello Everyone,
We were able to communicate(Send and Receive Idoc's) to SAP via WCF-SAP Adapter in BizTalk 2010.
SAP Servers were upgraded to ECC5 to ECC 6 and we started facing below issue communicating on send and receive both.
I am aware that there is a hotfix available but that is more on the Receive Side from SAP. Nevertheless I installed the hotfix but issue still persists. Any suggestions will be highly appreciated.
Microsoft.ServiceModel.Channels.Common.XmlReaderParsingException: The segment name is not valid for the IDOCTYP, Release, or CIMTYP. Segment name: E2EDP01006GRP   IDOCTYP: ORDERS05
Release: 700    CIMTYP: . Ensure that your message xml validates against the operation schema.
Server stack trace:
   at System.Runtime.AsyncResult.End[TAsyncResult](IAsyncResult result)
   at System.ServiceModel.Channels.ServiceChannel.SendAsyncResult.End(SendAsyncResult result)
   at System.ServiceModel.Channels.ServiceChannel.EndCall(String action, Object[] outs, IAsyncResult result)
   at System.ServiceModel.Channels.ServiceChannel.EndRequest(IAsyncResult result)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at System.ServiceModel.Channels.IRequestChannel.EndRequest(IAsyncResult result)
   at Microsoft.BizTalk.Adapter.Wcf.Runtime.
Thanks,
Vikingss

I am aware that there is a hotfix available but that is more on the Receive Side from SAP. Nevertheless I installed the hotfix but issue still persists. Any suggestions will be highly appreciated.
For this issue, you can contact Microsoft support directly(http://support.microsoft.com).

Object Class Invalid when downloading the pricing procedure from ECC to CRM

Hi,
I want to download the pricing procedure for that I have created the ZDNL_CUST_CND which contains only the following tablesT683, T683S, T683T and T683U.
When I check in R3AM1 status is Red.
The following Error have been found in SLG1
     Object class invalid
     Error in inbound data check
Message no. CND_MAP120
Diagnosis
During the receiving inspection, serious errors were found in the consistency of the exchange object.
System Response
Data exchange is terminated
     Data exchange terminated
Message no. CND_MAP122
Diagnosis
Data exchange has been terminated due to serious errors. No exchanged data has been posted in the system.
The following Error has been found in SMQ1
     R3AD_CONDITIONS     STOP
Details of STOP
Set by Host name: litldq; Transaction: ; Report: SAPMSSY1
I have checked the connection, everything is perfect.
What may be the problem?
Thanks

Hi,
Please try to re-generate the adapter object (ZDNL_CUST_CND) services using trx.
SMOGGEN
. After this, try re-running the load.
I assume that your CRM inbound mapping module are correctly coded. If the problem persists, try de-registering the R3AD_CONDITIONS inbound queue using trx.
SMQR
and then debugging the inbound queue from the same trx. after re-starting the load.
Reward if this helps!
Regards,
Sudipta.

Hw to download/upload sap scripts from & to our PC?

please help me fnds.
urs
chengal.

Hi,
If we specify our own name, system will showi the following error message.............
ERROR: "Dataset does not contain object "
In this case in the downloaded file we need to rename the form name with our own form name.
Exp:-
exporting form name is : ZTEST ( from QA server into local file )
while importing if we need new form name : ZTEST1
we need to rename every where in the note pad of downloaded file as ZTEST1 .
execute the RSTXSCRP provide the form name 'ZTEST1' and select IMPORT and F8.
will solve the problem.
thanku...
prakash

Issue with customer download from ECC 5.0 to CRM 5.0

Dear CRM gurus,
We are facing very strange problem regarding sales area and sales office in CRM 5.0 test system
During the download of an ECC 5.0 customer into CRM the BDOC is giving the following error - 'Sales office O 50000617 is not available' and 'Sales office O 50000617 sales group not maintained for sales area O 50000608 10 10'and Validation error occurred: Module CRM_BUPA_MAIN_VAL, BDoc type BUPA_MAIN.
I just select the BDOC and reprocess it immediately. Now the customer is downloaded into CRM and BDOC turns into green. I am also able to see the sales office and sales area in the downloaded CRM BP.
The sales office 50000617 is very much there in CRM and is properly assigned to sales area 50000608 10 10. That's why, I should be able to reprocess the struct BDOC successfully.
But for some reason the sales office is not getting determined first time during the download. This issue is driving me crazy. This only happens with the customers with sales office. If there is no sales office in ECC customer (i.e. the field is empty) then there is no issue. This customer will get downloaded without any error.
Also the downloaded material doesn't have the sales area data.
This issue doesn't happen in our development system. The only difference is, sales org structure in development system is manually created and it is downloaded from ECC in test system.
Can you please advice me on how to solve this issue?. It is a bit urgent.
All valuable inputs must be rewarded,
Regards,
Raj

Hi Gun,
You are the only one responded to my issue. I have allocated some points.
Yes. I have checked the assignment in CRM organizational model.
I did download the org. structure from ECC 5.0
All objects including sales offices are activated for determination and I have verified with green light
As per your suggestion if the sales area data is not matched between the two systems, then how come the error will not reappear during the bdoc reprocess?
What is missing during the first time bdoc process? Looks something is missing for validation module?
Any inputs?
Thanks,
Raj

CRM exchange rate delta download from ECC

Hi experts,
We are trying to download the exchange rate from ECC for the delta scenario. I've tried to schedule a job to run the program SMOF_DOWNLOAD with Object DNL_CUST_BASIS3, but it comes up with an err, which says "Error 004 DNL_CUST_BASIS3: No Initial Load if data distribution is active. Use Synchron. Load". Will anyone advice how to achieve the delta download for exch rate from ECC to CRM or what i did wrong in the program execution?
Rgs, Michelle

Hi,
you can check the object DNL_CUST_BASIS3 by t-code:R3AC3,
Delete Function COMPARE, Then can load again and check
Regards...
Arup

Download SAP GRC for ECC 6.0

How can I download SAP GRC for ECC 6.0?

GRC applications comprise Access Control, Process Control, Global Trade Service, Environmental Compliance, Environment Health & Service, Risk Management, etc.
The software license for these applications scales with the licensing organization's revenue or an equivalent metric.
You'll obtain a quotation from your account manager.

How to activate delta download for BP from ECC to CRM

Hi,
i have completed BP initial download from ECC 6.0 to CRM 5.0.
i dont know how to activate the Delta download?.
Plz anyone tell me the procedure.
regards
geetha.g

Hi Geetha
Synchronization download allows you to synchronize inconsistent datasets on various databases. This can be controlled in time slots or can be triggered manually.
1. Creating a Request
Choose Middleware -->Data Exchange --> Synchronization --> Define Requests.
To define a new data request, choose Display --> Change and New Entries.
Enter data for the request.
In object name enter CUSTOMER_MAIN
2. Starting the Request
Choose Middleware --> Data Exchange -->Synchronization --> Synchronize Objects.
A selection screen appears. Enter the objects to be synchronized or use F4 input help to select objects. Choose Execute to start synchronizing the data.
3. Monitoring Request
Choose Middleware --> Data exchange --> Synchronization --> Monitor requests
Enter an object name or a range of object names. Use the input help or of you want to display all the objects, do not enter an object name at all. Choose Execute.
Further help is available on http://help.sap.com/saphelp_crm50/helpdata/en/c7/95fc381478ab6fe10000000a11402f/frameset.htm
Hope this would help.
Regards,
Rekha Dadwal
<b>You gain a point for every point that you reward. So reward helpful answers generously</b>

Download IDOCS from ECC to XI in 7.1.

Hi
Can anyone explain how do we download the Idocs from the ECC to PI in 7.1 version
Thanks
PR

HI
is your requirement to import IDOC metadata from ECC to XI.
If yes then you need to create an RFC destinations from ECC to XI and XI to ECC for making two way communications for IDOCs of TYPE 3 (ABAP).
Then from your Software component enable the option for import IDOC and RFC interfaces from SAP systems permitted. Go to imported objects under same SWCV and right click to import IDOC meta data.
Check the link for refrence
https://www.sdn.sap.com/irj/scn/wiki?path=/display/xi/file%252bto%252bidoc
Thanks
Gaurav

Re: Routing download to SAP ME from ECC

Similar Messages

Maybe you are looking for