Re: Satellite M50-216 - WLan connection keeps disconnecting

Model M50-216
I can connect to my hub no problem, and as a comparison I have another Laptop (dell) that never eperiences the problems I get with the Equium. Here's what happens.
I connect no problem, then it may work fine for 5 mins or an hour, then it disconnects, I can still see the network and it will happliiy connect up again. I have tried at my friends house with a different router and the probelm remains, so its not a router problem.
From a configuration viewpoint, I have windows managing the network connection.... ANY IDEAS??

Did you try to update the WLan driver and the BIOS?
In many cases this is the key to solve such WLan dropping issues.

Similar Messages

  • Wireless connection keeps disconnecting - Satellite C650 16U

    Hi
    My wireless connection keeps disconnecting frequently and I have to manually reconnect it. I don't think it is a router issue as this doesn't happen with other laptop that is used in my house. Any ideas why this is?
    Thanks

    Hi mate
    I recommend checking the power saving settings in Win 7 power management.
    There you can change (disable) the power saving for WLan card.
    This helped in my case.
    Please also check this thread:
    http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=59177
    As I said; power management setting is the key you should also update the WLan driver!

  • 5230 3g connection keeps disconnecting

    I have bought the Nokie 5230 and have a 3g Internet connection supporting more than 7.2 mbps.  I am able to connect fine after providing the access point details but the connection keeps disconnecting randomly. There is no pattern to this.
    I tried KB925681 and installed the Hotfix. Even tried some other steps mentioned in some websites which told me to reset the adapter settings and change the properties from Device manager. However none has been succesful.
    I use the Ovi app to connect my laptop to internet through the same connection. The same problem exists even while connecting from the computer.
    Please help

    Bump!
    Got the same problem on a windows 7 desktop...
    any solutions? thoughts?

  • Satellite A100-003 WLAN connection timeout(with WPA-PSK)

    I have a Satellite A100-003 notebook with preinstalled Windows Vista.
    When I try connect to my router with WPA-PSK (TKIP) I have error:
    Wireless authentication failed because of a timeout.
    My notebook and router configurated correctly!! I installed new intel drivers for 3945ABG chip.
    WPA2-PSK and WEP work fine.

    Hi
    The same happened on my old notebook.
    I was not able to establish the WLan connection for longer than 1min with WPA encryption.
    I have downloaded the newest Atheros driver and updated everything.
    Everything works fine with WEP but not WPA.
    Then I have disabled the Windows own configuration option and use the Atheros client utility. Now everything works fine!
    I would recommend using the Intel Proset utility and check all possible settings!

  • My VPN connection keeps disconnecting

    I live out side the uk so use a VPN connection to watch British tv but my VPN connection regularly disconnects mid way through program's, how can I stop this

    I have been having same issue , it disconnects during a download and have to keep restarting the connection. I am using PurVPN.

  • Sound problems with Satellite M50-216

    Hi
    The sound has gone on my M50-216. I have tried uninstalling and reinstalling the sound driver but it hasn't helped.
    Any ideas as to what I should try next?

    Sorry but if someone writes such thread how you expect some help. how to understand your problem? Please give us more details.
    Is sound card recognized properly in device manager?
    Are sound settings available?
    Have you checked mute option?
    Have you checked sound switch?
    Have you tested it with headphones?
    and so on. Have you tried to do anything?

  • Satellite P100-105L: WLan connection issues

    i have following problem.
    have Satellite P100-105 notes, with XP home. All drivers up to date, connecting via WiFi.
    When i connect to internet via IE7/IE6/Mozilla/Opera some times i have just message "waiting for reply from ....." in statusbar, and the page wont load.
    If i refresh its ok, or at some pages it just dont work even if i refresh (typically on typo 3 saving document).
    1. i have no viruses, no trojans.
    2. tryed with IE without addons, allso with IE when i was in "safe mode" of XP.
    3. Downloaded latest WIFI drivers, latest bios.
    4. when i try it on other notes from toshiba, else model with win vista on IE7, it works normally. Allso when i upload/download huge files, its ok.
    5. have legal, and up to date windows XP with SP2
    so i can say 4 things:
    1. its not caused by signal,
    2. its browsing soft independant.
    3. it may be not caused by HW error, if it would, large downloads/uploads will fail
    4. any other software it is in memory in normal state, its not causing this.
    SOMEBODY HELPPP
    its very, very annoying.

    >When i connect to internet via IE7/IE6/Mozilla/Opera some times i have just message "waiting for reply from ....." in statusbar, and the page wont load.
    You said sometimes??? So I assume it does not happen every time while you are using the WLan.
    >4. When i try it on other notes from Toshiba, else model with win vista on IE7, it works normally. Also when i upload/download huge files, its ok.
    The both notebooks use the same WLan card? If not then there could be a compatibility issue between the router and WLan card
    But generally its not easy to say what the problem could be. Did you check of the same message appears using the LAN cable?
    Check this!

  • Satellite L450D-13U - WLan connections issues

    Hi,
    I use talktalk as my internet provider.
    I started to get a intermitent connection and the internet light on the router goes red.Its a d-link router.
    3 weeks a vist from a bt tech they now tell me that the problem might be my laptop.
    How could this be when it does connect and then drops the connection very iradic.

    Hi
    You said that the router disconnects from internet. Right?
    So how can be this notebook issue? Sorry but I dont understand this
    In your case I would recommend checking the router settings.
    You should check for the firmware update and should also check if other notebooks/computers connected to the same router would have the same problems.
    If you are 100% sure that your router is OK, then you should check the notebooks WLan.
    In such case its advisable to update WLan driver

  • Satellite C660-115 WLan connection only works when power cable is connected

    Hello,
    I bought a satelite C660-115 a few weeks ago. I would like to surf the internet anywhere in my home without any wires/cables.
    From the first day I had this problem: when I disconnect the _power_ cable, the wireless connection will stop working.
    The webpage on my screen will still be there, but loading a new page is a problem.
    Sometimes it helps to reload (pressing F5), sometimes not. It always helps to "repair the ip-adress", but not for long.
    The only solution is to atach the power cable, regardless of how much power the battery still has.
    When I do so,there is no problem whith the connection at all.
    I went back to the shop where I bought it, they connected to their own wireless network and they had the same problem after a few minutes. In the shop too attaching the power cable solved the problem.
    So the problem must be in my lap top, not in my network (modem or so).
    Does this all sound familliar and if so, how can I fix it?
    I hope my English is understandable, I live in Holland.
    Thanx in advance!

    Here the solution:
    http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=59177
    Change the Power Save options for Wlan in Win 7 power managment

  • Satellite Pro L300 - WLAN connection has stopped working

    FN+8 indicates that the wireless is on as the icon shows but suddenly tonight the connection has failed while I was browsing the internet and I can't get it back.
    I have reset the modem - the laptop is currently connected by ethernet cable to the same modem with a good connection. The laptop is about 16 months old and is running Windows 7 Pro. I've updated all drivers tonight but even though it's "on" it isn't working.
    Will dig out the wireless usb modem tomorrow but I'm wondering if the card has given up :(
    null

    Yes it was listed. Oddly enough when I booted it the next day the wireless kicked in straight away. Go figure!
    Talked to a friend who repairs puter's in the US and he's told me that if it happens again to reset the wireless card - preferably without the two wires disconnecting from the card. I'm used to doing hardware and software upgrades with towers - time to learn about laptops :)
    Thanks for posting a reply xaver :)

  • Remote Desktop Connection keeps disconnecting

    I have BT Hub 3 (recently upgraded to Broadband Unlimited at the end of Jan 2015).
    Up until recently I was able to Remote Desktop into my work computer (via VPN tunnel) with no problems at all.
    Around March 6th, I began to experience problems with the Remote Desktop Connect (RDP), in that it now makes an initial connection and then disconnects (typically within a few seconds, occasionally after a couple of minutes).
    It will then cycle through a number of reconnection attempts, all with the same result, before it finally drops altogether with the message:
    'The Remote Desktop Services Session has ended. Connection to the remote computer was lost, possibly to network connectivity problems'.
    I have tried restoring both machines back to a date when i know the connection was working - no joy. I've also tried deleting an re-creating now VPN and RDP connections - no joy. I've researched online and tried various other things, but still have the same problem.
    I've tried connecting using a laptop (via my wirelss connection) with the same result. My manager has RDP'd in from his home machines and has had no problem at all.
    This leads me to consider whether the problem is with the router/BT Hub itself. I've tried the online diagnostic tools with no resolution to this problem.
    Has anyone else experienced the same problem?

    Oh well, I suppose that after more than 2 months of frustration with this issue, the BTCare Community is unable to help me.
    I can be fairly sure that it's not my machine as it's also happened using a laptop, plus I've even reset my PC right back to its original factory state just to sure that nothing had become corrupted.
    The network guys where I work have also looked at this and can find nothing at that end to cause this problem.
    I've even borrowed another BT Hub and tried it through that - same problem.
    So where does the answer lie? VPN issue? I've tried other VPN options - same problem. RDP problem? I've practically exhausted the list of suggested solutions that can be found by trawling the internet.
    I even upgraded the broadband cable to replace the cheap old thing that has been working perfectly well in terms of broadband, again, to eliminate this as a possibility. Now I'm stumped.
    To me, it looks like the problem lies between my router and the workplace network, i.e. a physical problem among the miles of lines connecting the two. Of course I don't want to shell out for a BT engineer to come out to investigate, so I thought that the combined wisdom of this community may have been able to help.
    Sadly not.

  • My dial up connection keeps disconnecting!!!

    hi... my dial up spends a while to even connect!!! most of the time it will just say that it does not detect a dial tone... but ive checked with other computers on the same line and its no problem... i even checked with the internet provider... please help!!!

    Hi,
    This may require a bit of hunting on your part, as you are on OS 10.2 and I am on 10.4. What you want to do is find the System Preference Pane that has the Modem info. On mine, it is: Network > Internal Modem > PPP > PPP Options. Here I find 'Session Options'with a check box to "Disconnect if idle for XX minutes". Un-check it. If you can find a setting like this, this may be your answer. I know it caught me in the first day or so. Failing that, SCOUR this Discussion Board, as I know I have seen other solutions -- it's just I can't remember where. Good luck.

  • Connection keep disconnecting and reconnecting itself

    Few days ago I installed arch on this laptop (HP Pavilion 15-b129el Sleekbook), I started installing and configuring stuff on it today and I encountered a couple of problems with the connection and xorg (which I won't discuss in this thread).
    To make it short, launching wifi-menu will show correctly all the available networks, it won't, however, actually connect.
    I tried netctl which successfully connected and gave me a chance to download and install programs, sadly the connection doesn't last long but it seem to reconnect by itself.
    For instance, I was updating with pacman -Syu now and as it was downloading the package linux3.10.6-2-X86_64 it kept disconnecting to reconnect after a bit and restart downloading the package from where it stopped.
    I decided to test if my laptop had hardware problem and booted into my xubuntu partition, I launched a ping command and it seem to be stable, sometimes it takes a bit longer than it should to receive new signal but it don't seem to lose connection at all.
    Suggestions?
    Last edited by arkindal (2013-08-14 10:53:14)

    Update: Today wifi-menu managed to connect with a similar behaviour of netctl, connection works fine for a while, then doesn't work, then work again, tested with the ping command, I'd say a bit over a hundred pings works fine, then it stop for a while saying network unreachable, then working fine again.
    Changed title to fit better the situation.

  • Idle RDP connections keep disconnecting?

    My Windows Server 2012 R2 remote desktop users keep being disconnected from idle sessions.  They get "Your Remote Desktop Services session ended because the remote computer didn't receive any input from you."
    Can anyone tell me why? I've change the GPO settings at "Computer Configuration\Polices\Admin Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Session Time Limits" both for the computer and user level but I still
    get this. For example I've even set "Set Time Limit for active but idle Remote desktop services sessions" to Enabled with the limit of "Never". 
    Does anyone know how do I stop this from happening?

    Hi,
    Thank you for your post in Windows Server Forum.
    Please check that you have also applied setting under Collection properties, session tab For Idle Session limit. I checked in my environment with 1 minute and able to disconnect idle session and then applying “Never” then it’s never ending the RDS session.
    For your reference, you can check the registry setting. When you will apply any group policy for idle session you can see the changes in registry.
    Hope it helps!
    Thanks,
    Dharmesh

  • Connection keeps disconnecting randomly on WRT54GS

    I have a WRT54GS router using AT&T DSL. My computer (Vista 64-bit) has a Linksys WUSB600N wireless adapter.
    Recently, I've been disconnecting randomly from my router. Once I've disconnected, I have to restart the computer because I can't see my router under the "connect to a network" option. I've just tried changing the channel from 6 to 1, but it still didn't work. I reinstalled my adapter's driver, but it still occurs.
    My sister's laptop and iPod Touch have no problems with disconnecting. I don't know what else to try. It's hard to get any work done.

    Have you downloaded the drivers for the wireless network adapter from the Linksys website and tried to update the drivers on your computer and then install the drivers on your computer and then try to connect to your wireless network.

Maybe you are looking for

  • Can not create directory error while creating database

    i am creating database using dbca in oel but when i try to do so i get an error saying can not create directory pawii and pawii is the sid actually oracle is installed on u01 and i am creating database in u02 but this error is not allowing me to crea

  • VO extension errors when trying to run the page

    Using JDeveloper I have extended a view object:  oracle.apps.ics.por.wf.server.ReqLinesNotificationsVO I created a new view object, created the substitution and compiled the project.  The files created:  SDSUReqLinesNotificationsVOImpl.class         

  • JDBC query with Sybase database

    Hi Folks, I am working with Oracle 9i Reports Builder connecting to Sybase database using jdbc-odbc driver type. I could connect to the database, use a simple query and generate reports. Problem is only when, I use a variable in WHERE clause and have

  • Loading Long text longer than 132.

    Hi, I am trying to load Material Master long text (Basic data, Purchase order Text) . The LSMW (a standard batch / direct input) for Long text only allows 132 chars and my long text is longer than 132? What can i use to load the long text? Regards, K

  • SSL from EJB using Verisign API

    I'm trying to make a call from a session bean in WL6.1 SP1 to Verisign's PFProAPI class. I have successfully used the API in other setups (in servlets, etc.), but cannot seem to get it to work from within an EJB. The verisign test server just keeps r