Re: Satellite P750 with 2 external monitors

Hi,
I am just wondering if it is possible to have two "external" LCD monitors connected to my Toshiba Satellite P750?
One on the VGA and the other one on the HDMI perhaps?
Cheers
Niels

My system is factory standard Windows 7 64-bit with no modifications of any kind. The system automatically detects the monitors.
I can switch between displays using the Fn+F5 key or by using the right-click menu from the Windows dekstop (Graphics Options - Output to - Extended Desktop...) or by using the Intel graphics setup in 'Graphics Properties'.
The VGA attached display shows up as 'Monitor' and the HDMI attached display shows as 'Digital Display'.
So I can have any combination of two of the three displays: built-in display, VGA or HDMI. It would be nice if I could use all three at once but that seems to be a hardware limitation.
I can set any display as tthe primary Windows monitor. In my case I have the setup 'Graphics Options - Output to - Extended Desktop - Digital Display + Monitor' which makes the HDMI display the primary. Using the 'Extended Desktop' configuration means that I can drag windows from one monitor to another as if they were one large monitor, but I can configure them separately and play full-screen games on just one monitor while the second monitor is used to display other information.
I made sure of being able to use two external monitors before I bought this system. I discovered the benefits of dual external monitors many years ago and I would hate to go back to being restricted to just one.

Similar Messages

  • Yosemite: Turning off Macbook Pro screen (lid open) with external monitor connected

    Here we go again, this worked pre-Yosemite. Now it seems this trick no longer works. After following these steps again the screen on my Macbook Pro now turns on after logging in and opening the clam shell.
    Anyone figure out/know a way to turn off the screen on the Macbook Pro with external monitors plugged in? (yes, closing the clam shell–but I'm referring to keeping the clam shell open with the display turned off)
    http://gizmodo.com/5938452/a-trick-to-make-using-an-external-monitor-with-your-m acbook-way-better
    To execute in Terminal:
    sudo nvram boot-args="iog=0x0"
    To undo in Terminal:
    sudo nvram -d boot-args
    Once you type it into terminal I believe you need to enter your password. I then restart my machine. Now the TRICK is to either restart your machine with the lid already closed (hit restart then slam the lid!) OR turn the machine on for the first time (then quickly slam the lid!) once you are past the login screen you can open the lid.

    Has anyone experimented with tip 2 (active corners)?  Perhaps it still works.
    http://www.cultofmac.com/176329/turn-off-internal-lcd-display-of-your-macbook-ai r-os-x-tips/
    Κοσμά τι λες; Τα έχεις μπερδέψει. Άλλο συζητάμε εδώ. Το ότι δεν μπορείς πια να δουλεύεις μόνο με την εξωτερική οθόνη (να έχεις σβηστή την ενσωματωμένη οθόνη όταν έχεις συνδεμένη εξωτερική).

  • Using the GT70 with external monitor and lid closed

    I wasn't sure where to post this question.
    I have several laptops and use external monitors. I close the lid on the laptops and the display continues to work.
    On the GT70, the system shuts down. It won't allow me to use the external keyboard and mouse or display the session.
    Any suggestions if there is a configuration option to allow the GT70 to continue to function with external monitor and lid closed.

    Yup. This is a windows setting. You need to go into your control panel -> power options -> "Choose when the computer sleeps" and "Choose what closing the lid does"
    That should solve the problem. I currently have my GT70 hooked up to a 42" TV and I can close the lid and it stays on and the TV continues displaying as well. No problems. =]

  • Mountin Lion has trouble with external monitors

    Not so much a question as a shout-out. Since going to Mountain Lion, my pretty new (February this year) MacBook has been having no end of trouble with external monitors. I use it a lot with the clamshell closed with two different external monitors of two different sizes, one at home, one at work. It sometimes thinks the one is the other, or if I unplug the monitor in sleep, when I later open the clamshell, the screen stays black and I have to force a reboot with the power button. Never had these problems with exactly the same set-up in Lion. Sometimes it also refuses to find a connected monitor or projector, I have to pull the dangle and put it in again.

    If memory serves, one of the 'flaws' with BM's hardware is that it will not convert on-the-fly.  So if your sequence doesn't match what the TV is accepting, you get black.
    For example, my TV will not accept 1080p, only 1080i, so working in a 1080p sequence would produce no image for me as the BM will only output exactly what's in the sequence, it can't convert my 1080p/24 sequence into 1080i/30 for output.
    Now I'd expect your TV would have no trouble accepting a 720p signal but, maybe the above data will lead you down a path of investigation.

  • MacBook Pro with external monitor and keyboard.

    Hello, everyone.
    I've tried to find the answer for this question but haven't found a clear answer with my Google search.
    My older Powerbook G4 will not allow me to work with an external monitor and keyboard with the screen in a closed position. I am about to purchase a new MacBook Pro and would like to be able to use it at home with a larger monitor and keyboard but with the lid closed and its built-in screen turned off. Can this be done ?
    How can a MacBook Pro be used (turned-on) with external monitor and keyboard while the lid is closed and the its screen is off ?
    Thank you in advance for your answers.
    Joseph

    Hi Niel,
    I have the same problem with my MacBook and I followed the instructions you posted. My issue is that when the computer wakes up after clicking the buttons on the keyboard it then quickly goes back to sleep. I can't seem to keep it awake when the lid is closed. I've been searching for an answer without any luck. Any idea how to solve this problem?
    Thanks!
    P.S. After I finished posting this message I figured out my problem. While fiddling with my computer and monitor, I inadvertently disconnected the power. After reconnecting the power, I was able to wake my computer and keep it awake. A note to other people having this issue: the computer must be connected to a power outlet to run in closed mode.
    Message was edited by: qwertyphd

  • Can I use MacBook pro A1211 with external monitor, screen has died but

    CCan I use MacBook pro A1211 with external monitor, screen has died but computer seems fine

    Hmm seems like this model has DVI out. You could just plug a standard DVI monitor into that. Or use the DVI connector (VGA supported with included adapter; S-video and composite video supported with optional adapters) adapter that came w/ your machine.

  • MacBook Pro won't stay asleep with external monitor attached.  When sleep is selected from the Apple menu the computer will go to sleep only to continually wake up...go back to sleep...wake up...etc. every few seconds.

    MacBook Pro won't stay asleep with external monitor attached.  When sleep is selected from the Apple menu the computer will go to sleep only to continually wake up...go back to sleep...wake up...etc. every few seconds.  This only happens when using the external monitor. Does anyone have any suggestions?

    Mine does that too. The worst thing is when it goes to sleep, then wakes up and keeps running while the lid is closed and it is wrapped up in a case. I am afraid when the hot weather comes it is going to burn up. I am hoping Apple fixes it in the software or they may have a melted MBP to replace.
    Then when I open the lid it is crashed running at fill tilt, pumping out heat to beat the band. I am forced to hold the button down and reboot.
    I wiped my hard disk and reinstalled my OS, but it didn't help. I reversed my OS to 10.5.0 and it solved the DVI problem but still won't sleep. This post will probably be deleted by Apple, they did it a few days ago. I just don't know what to do, and I consider myself a real Apple expert. Just hoping you realize you are not the only one.

  • MS Flight Simulator 2004 on a Satellite A100-451 & external monitor

    Hello, I have a A100-451 running Vista plus an external 19" 1280*1024 monitor. I have loaded FS 2004 OK.
    Has anyone here any experience of using FS on a laptop with an external monitor ?, and what is the best way of setting up the 2 screens ?
    Thanks
    KK

    Hi again :)
    hm, would you like to use the second screen as a extension for your cockpit?? Usually it should be possible. A friend of mine set a full cockpit view with 3 TFTs on his desktop machine,
    but I dont know how it is just with two screens.
    Here is a link which could maybe give you some ideas with gaming on multiple monitors:
    http://www.wideview.it/
    Have phun
    Greets

  • Issues with "Higher performance" setting on Macbook Pro with external monitor

    Hi all,
    I rarely used the "Higher performance" setting in the Energy Saver pane of System Preferences.
    I use my MB connected with an external monitor, with its own screen closed. I tried to switch that setting on and the external monitor seems to repeatedly turn off and on. This strange behaviour vanishes if I open the MB's screen, using it in a double monitor configuration.
    Did anyone hear about some similar problem?
    p.s.: I don't know if this is the exact location for this thread, any suggestions is welcome

    It was set to 1080p, 1920x1080 did not show up as an option (even when holding the option key). 1080p should be equivlant. As as experiment I grabbed another monitor that was not being used. It is a 22 inch LG with a maximum display of 1920x1080, and its currently set to 1920x1080. The issue is a little different, was not detected as a TV this time, but the screen still looks blurry. There may be some improvement but not much.

  • HP Pavilion DV6; Black Screen & Atikmpag.sys BSOD with external Monitor

    Hello Guys.
    I have HP Pavilion DV6 Core i7 with ATI Mobility Radeon HD 5650 Graphics Card. Two weeks ago, I started getting continous Atikmpag,sys BSODs. The operating system also started giving me warnings about the hardrive. After a few days, the BSODs got more frequent. Then one day, I was doing normal stuff on my PC and the Display Driver crashed. Instead of recovering, the PC froze. I forced restart my PC but it got worse. The display of my laptop went black. I connected the laptop to external monitor which detected the display. When I tried to load the windows, it started giving me the Atikmpag.sys BSOD on the start up. Now the operating system works fine in the Safe Mode but with nothing on the laptop's screen. The soultions I have tried so far are.
    -Reinstalled the windows thrice
    -Removed the drivers and installed the updated ones a bunch of times.
    -Rolled back the bios to an earlier version
    -Removed the hardrive and tried to load it from an operating system installed on external flash drive
    -Tried loading the PC with linux on external flash drive
    -Opened the laptop and cleaned it thoroughly
    -Removed all the components and plugged them one by one.
    -Removed the old Atikmpag.sys in system32 folder and expanded it with the latest ones.
    -Installed every thing fresh from HP website
    None of these tricks have given me any luck yet. The only way, I could use the operating system in normal mode, is to delete the atikmpag.sys file in safe mode and then log on back in normal mode. I also analysed the minidump file through window debugger and it says that atikmpag.sys is causing this crash with the TDR message. I did all these with an external monitor as the display of the laptop is black since that day.
    Below are the detailed specs of my laptop.
    OS Name: Microsoft Windows 7 (64 bit) Home Premium
    Version: 6.1.7601
    System Model: HP Pavilion Dv6 Notebook PC
    Processor: Intel Core i7 Q 721 @ 1.60 GHz
    Bios Version/Date: Hewlett- Packard F.29, 11/7/2011
    Installed Physical Memory (RAM): 6GB
    Graphics Card: ATI Mobility Radeon HD 5650 1 GB
    I have tried almost every solution available on these forums but still have not gotten any where. I am wondering how could the display, graphics card and hard drive stop working at the same time .
    I would really appreciate if someone colud help me through this problem.
    Thank you
    P.S. Kindly ignore my English mistakes as it is not my first language.

    Hi Goloono,
    Welcome to the HP Forums!
    I would like to take a moment and thank you for using the forum, it is a great place to find answers. For you to have the best experience in the HP forum, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    First I would like to reassure you your English was great, I had no problems understanding you.
    I grasp that you are getting a black screen with the  error message " Atikmpag.sys".
    Here is a link to Troubleshooting Error Messages on a Black Screen that may Occur During Startup or Boot.
    Have you run The HP Support Assistant to help with updates and resolving issues.
    Here is a link to a Microsoft Community Page with this exact issue. There are some suggestions that may help.
    Blue Screen error with atikmpag.sys in Windows 7 .
    Here is a link to the HP software and driver page. You will need to input your exact model of DV6 you have and follow the prompts.  This page will have the recommended drivers and it will list bios updates. if there are any applicable ones.
    HP Drivers & Downloads.
    How Do I Find My Model Number or Product Number?
    At one point you state you had a hard drive error, to rule that out I would run a diagnostics.  SMART Media Test Error Appears when Notebook is Started
    Please let me know if this has helped.
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • [solved] ThinkPad connect with extern Monitor Problem

    Hello community
    I have installed arch on my T420 integrated HD 3000 and i have the Problem that when i start arch and the boot messages comes i can see the deamon starts ok,ok,ok who should be on the right side but on the NEC they was displayed 5 cm inside. Also when iam on the console and i type dmesg all the output scroll down and broke 5 cm from the roof. And when iam on openbox and i will maximize one window it would be maximized on the size from the Laptop LCD.
    I have made an .xinitrc
    #!/bin/sh
    # ~/.xinitrc
    # Executed by startx (run your window manager from here)
    #xrandr --output DP2 --auto --output LVDS --right-of LVDS
    #xrandr --output DP1 --auto --output LVDS --auto --same-as DP1
    xrandr -d DP2 -s 1900x1200
    if [ -d /etc/X11/xinit/xinitrc.d ]; then
    for f in /etc/X11/xinit/xinitrc.d/*; do
    [ -x "$f" ] && . "$f"
    done
    unset f
    fi
    # exec gnome-session
    # exec startkde
    # exec startxfce4
    and here is my Xorg.0.log
    [ 81.298]
    X.Org X Server 1.12.4
    Release Date: 2012-08-27
    [ 81.298] X Protocol Version 11, Revision 0
    [ 81.298] Build Operating System: Linux 3.4.8-1-ARCH x86_64
    [ 81.298] Current Operating System: Linux bullitt 3.5.4-1-ARCH #1 SMP PREEMPT Sat Sep 15 08:12:04 CEST 2012 x86_64
    [ 81.298] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=7b8780ba-278c-4d61-a1ec-ba2a6f96c6ba ro quiet
    [ 81.299] Build Date: 27 August 2012 08:04:39AM
    [ 81.299]
    [ 81.299] Current version of pixman: 0.26.2
    [ 81.299] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 81.299] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 81.306] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Oct 7 16:33:34 2012
    [ 81.307] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 81.308] (==) No Layout section. Using the first Screen section.
    [ 81.308] (==) No screen section available. Using defaults.
    [ 81.308] (**) |-->Screen "Default Screen Section" (0)
    [ 81.308] (**) | |-->Monitor "<default monitor>"
    [ 81.308] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 81.308] (==) Automatically adding devices
    [ 81.308] (==) Automatically enabling devices
    [ 81.308] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 81.308] Entry deleted from font path.
    [ 81.308] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 81.308] Entry deleted from font path.
    [ 81.308] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 81.308] Entry deleted from font path.
    [ 81.308] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 81.308] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 81.308] Entry deleted from font path.
    [ 81.308] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 81.308] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/
    [ 81.308] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 81.308] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 81.308] (II) Loader magic: 0x7c8b00
    [ 81.308] (II) Module ABI versions:
    [ 81.308] X.Org ANSI C Emulation: 0.4
    [ 81.308] X.Org Video Driver: 12.1
    [ 81.308] X.Org XInput driver : 16.0
    [ 81.308] X.Org Server Extension : 6.0
    [ 81.308] (--) PCI:*(0:0:2:0) 8086:0126:17aa:21ce rev 9, Mem @ 0xf0000000/4194304, 0xe0000000/268435456, I/O @ 0x00005000/64
    [ 81.308] (II) Open ACPI successful (/var/run/acpid.socket)
    [ 81.308] (II) LoadModule: "extmod"
    [ 81.309] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [ 81.309] (II) Module extmod: vendor="X.Org Foundation"
    [ 81.309] compiled for 1.12.4, module version = 1.0.0
    [ 81.309] Module class: X.Org Server Extension
    [ 81.309] ABI class: X.Org Server Extension, version 6.0
    [ 81.309] (II) Loading extension MIT-SCREEN-SAVER
    [ 81.309] (II) Loading extension XFree86-VidModeExtension
    [ 81.309] (II) Loading extension XFree86-DGA
    [ 81.309] (II) Loading extension DPMS
    [ 81.309] (II) Loading extension XVideo
    [ 81.309] (II) Loading extension XVideo-MotionCompensation
    [ 81.309] (II) Loading extension X-Resource
    [ 81.309] (II) LoadModule: "dbe"
    [ 81.309] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [ 81.309] (II) Module dbe: vendor="X.Org Foundation"
    [ 81.309] compiled for 1.12.4, module version = 1.0.0
    [ 81.309] Module class: X.Org Server Extension
    [ 81.309] ABI class: X.Org Server Extension, version 6.0
    [ 81.309] (II) Loading extension DOUBLE-BUFFER
    [ 81.309] (II) LoadModule: "glx"
    [ 81.309] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 81.309] (II) Module glx: vendor="X.Org Foundation"
    [ 81.309] compiled for 1.12.4, module version = 1.0.0
    [ 81.309] ABI class: X.Org Server Extension, version 6.0
    [ 81.309] (==) AIGLX enabled
    [ 81.309] (II) Loading extension GLX
    [ 81.309] (II) LoadModule: "record"
    [ 81.309] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [ 81.309] (II) Module record: vendor="X.Org Foundation"
    [ 81.309] compiled for 1.12.4, module version = 1.13.0
    [ 81.309] Module class: X.Org Server Extension
    [ 81.309] ABI class: X.Org Server Extension, version 6.0
    [ 81.309] (II) Loading extension RECORD
    [ 81.309] (II) LoadModule: "dri"
    [ 81.309] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [ 81.309] (II) Module dri: vendor="X.Org Foundation"
    [ 81.309] compiled for 1.12.4, module version = 1.0.0
    [ 81.309] ABI class: X.Org Server Extension, version 6.0
    [ 81.309] (II) Loading extension XFree86-DRI
    [ 81.309] (II) LoadModule: "dri2"
    [ 81.309] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 81.309] (II) Module dri2: vendor="X.Org Foundation"
    [ 81.309] compiled for 1.12.4, module version = 1.2.0
    [ 81.309] ABI class: X.Org Server Extension, version 6.0
    [ 81.309] (II) Loading extension DRI2
    [ 81.309] (==) Matched intel as autoconfigured driver 0
    [ 81.309] (==) Matched vesa as autoconfigured driver 1
    [ 81.309] (==) Matched fbdev as autoconfigured driver 2
    [ 81.309] (==) Assigned the driver to the xf86ConfigLayout
    [ 81.309] (II) LoadModule: "intel"
    [ 81.310] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    [ 81.310] (II) Module intel: vendor="X.Org Foundation"
    [ 81.310] compiled for 1.12.4, module version = 2.20.9
    [ 81.310] Module class: X.Org Video Driver
    [ 81.310] ABI class: X.Org Video Driver, version 12.1
    [ 81.310] (II) LoadModule: "vesa"
    [ 81.310] (WW) Warning, couldn't open module vesa
    [ 81.310] (II) UnloadModule: "vesa"
    [ 81.310] (II) Unloading vesa
    [ 81.310] (EE) Failed to load module "vesa" (module does not exist, 0)
    [ 81.310] (II) LoadModule: "fbdev"
    [ 81.310] (WW) Warning, couldn't open module fbdev
    [ 81.310] (II) UnloadModule: "fbdev"
    [ 81.310] (II) Unloading fbdev
    [ 81.310] (EE) Failed to load module "fbdev" (module does not exist, 0)
    [ 81.310] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
    965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
    4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
    Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
    Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
    Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
    Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
    Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
    Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
    Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
    Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
    Haswell Server (GT2+), Haswell SDV Desktop (GT1),
    Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
    Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
    Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
    Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
    Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
    Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
    Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
    Haswell ULT Server (GT1), Haswell ULT Server (GT2),
    Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
    Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
    Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
    Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
    Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
    ValleyView PO board
    [ 81.310] (--) using VT number 7
    [ 81.313] drmOpenDevice: node name is /dev/dri/card0
    [ 81.314] drmOpenDevice: open result is 8, (OK)
    [ 81.314] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
    [ 81.314] drmOpenDevice: node name is /dev/dri/card0
    [ 81.314] drmOpenDevice: open result is 8, (OK)
    [ 81.314] drmOpenByBusid: drmOpenMinor returns 8
    [ 81.314] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
    [ 81.314] drmOpenDevice: node name is /dev/dri/card0
    [ 81.314] drmOpenDevice: open result is 9, (OK)
    [ 81.314] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
    [ 81.314] drmOpenDevice: node name is /dev/dri/card0
    [ 81.314] drmOpenDevice: open result is 9, (OK)
    [ 81.314] drmOpenByBusid: drmOpenMinor returns 9
    [ 81.314] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
    [ 81.314] (II) intel(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 81.314] (==) intel(0): Depth 24, (--) framebuffer bpp 32
    [ 81.314] (==) intel(0): RGB weight 888
    [ 81.314] (==) intel(0): Default visual is TrueColor
    [ 81.314] (--) intel(0): Integrated Graphics Chipset: Intel(R) Sandybridge Mobile (GT2+)
    [ 81.314] (**) intel(0): Relaxed fencing enabled
    [ 81.314] (**) intel(0): Wait on SwapBuffers? enabled
    [ 81.314] (**) intel(0): Triple buffering? enabled
    [ 81.314] (**) intel(0): Framebuffer tiled
    [ 81.315] (**) intel(0): Pixmaps tiled
    [ 81.315] (**) intel(0): 3D buffers tiled
    [ 81.315] (**) intel(0): SwapBuffers wait enabled
    [ 81.315] (==) intel(0): video overlay key set to 0x101fe
    [ 81.315] (II) intel(0): Output LVDS1 has no monitor section
    [ 81.315] (--) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
    [ 81.315] (II) intel(0): Output VGA1 has no monitor section
    [ 81.340] (II) intel(0): Output HDMI1 has no monitor section
    [ 81.380] (II) intel(0): Output DP1 has no monitor section
    [ 81.393] (II) intel(0): Output HDMI2 has no monitor section
    [ 81.406] (II) intel(0): Output HDMI3 has no monitor section
    [ 81.464] (II) intel(0): Output DP2 has no monitor section
    [ 81.506] (II) intel(0): Output DP3 has no monitor section
    [ 81.507] (II) intel(0): EDID for output LVDS1
    [ 81.507] (II) intel(0): Manufacturer: AUO Model: 213e Serial#: 0
    [ 81.507] (II) intel(0): Year: 2010 Week: 33
    [ 81.507] (II) intel(0): EDID Version: 1.4
    [ 81.507] (II) intel(0): Digital Display Input
    [ 81.507] (II) intel(0): 6 bits per channel
    [ 81.507] (II) intel(0): Digital interface is undefined
    [ 81.507] (II) intel(0): Max Image Size [cm]: horiz.: 31 vert.: 17
    [ 81.507] (II) intel(0): Gamma: 2.20
    [ 81.507] (II) intel(0): No DPMS capabilities specified
    [ 81.507] (II) intel(0): Supported color encodings: RGB 4:4:4
    [ 81.507] (II) intel(0): First detailed timing is preferred mode
    [ 81.507] (II) intel(0): Preferred mode is native pixel format and refresh rate
    [ 81.507] (II) intel(0): redX: 0.610 redY: 0.350 greenX: 0.320 greenY: 0.560
    [ 81.507] (II) intel(0): blueX: 0.150 blueY: 0.130 whiteX: 0.313 whiteY: 0.329
    [ 81.507] (II) intel(0): Manufacturer's mask: 0
    [ 81.507] (II) intel(0): Supported detailed timing:
    [ 81.507] (II) intel(0): clock: 110.0 MHz Image Size: 309 x 174 mm
    [ 81.507] (II) intel(0): h_active: 1600 h_sync: 1664 h_sync_end 1706 h_blank_end 2010 h_border: 0
    [ 81.507] (II) intel(0): v_active: 900 v_sync: 903 v_sync_end 906 v_blanking: 912 v_border: 0
    [ 81.507] (II) intel(0): Supported detailed timing:
    [ 81.507] (II) intel(0): clock: 73.3 MHz Image Size: 309 x 174 mm
    [ 81.507] (II) intel(0): h_active: 1600 h_sync: 1664 h_sync_end 1706 h_blank_end 2010 h_border: 0
    [ 81.507] (II) intel(0): v_active: 900 v_sync: 903 v_sync_end 906 v_blanking: 912 v_border: 0
    [ 81.507] (II) intel(0): AUO
    [ 81.507] (II) intel(0): B140RW02 V1
    [ 81.507] (II) intel(0): EDID (in hex):
    [ 81.507] (II) intel(0): 00ffffffffffff0006af3e2100000000
    [ 81.507] (II) intel(0): 21140104901f11780261959c59528f26
    [ 81.507] (II) intel(0): 21505400000001010101010101010101
    [ 81.507] (II) intel(0): 010101010101f82a409a61840c30402a
    [ 81.507] (II) intel(0): 330035ae10000018a51c409a61840c30
    [ 81.507] (II) intel(0): 402a330035ae10000018000000fe0041
    [ 81.507] (II) intel(0): 554f0a202020202020202020000000fe
    [ 81.507] (II) intel(0): 004231343052573032205631200a00d0
    [ 81.507] (II) intel(0): EDID vendor "AUO", prod id 8510
    [ 81.507] (II) intel(0): Printing DDC gathered Modelines:
    [ 81.508] (II) intel(0): Modeline "1600x900"x0.0 110.00 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (54.7 kHz eP)
    [ 81.508] (II) intel(0): Modeline "1600x900"x0.0 73.33 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (36.5 kHz e)
    [ 81.508] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
    [ 81.508] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
    [ 81.508] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
    [ 81.508] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
    [ 81.508] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
    [ 81.508] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
    [ 81.508] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
    [ 81.508] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
    [ 81.508] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
    [ 81.508] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
    [ 81.508] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
    [ 81.508] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
    [ 81.508] (II) intel(0): Printing probed modes for output LVDS1
    [ 81.508] (II) intel(0): Modeline "1600x900"x60.0 110.00 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (54.7 kHz eP)
    [ 81.508] (II) intel(0): Modeline "1600x900"x40.0 73.33 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (36.5 kHz e)
    [ 81.508] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
    [ 81.508] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
    [ 81.508] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
    [ 81.508] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
    [ 81.508] (II) intel(0): EDID for output VGA1
    [ 81.533] (II) intel(0): EDID for output HDMI1
    [ 81.573] (II) intel(0): EDID for output DP1
    [ 81.586] (II) intel(0): EDID for output HDMI2
    [ 81.600] (II) intel(0): EDID for output HDMI3
    [ 81.657] (II) intel(0): EDID for output DP2
    [ 81.657] (II) intel(0): Manufacturer: NEC Model: 67d1 Serial#: 0
    [ 81.657] (II) intel(0): Year: 2011 Week: 33
    [ 81.657] (II) intel(0): EDID Version: 1.4
    [ 81.657] (II) intel(0): Digital Display Input
    [ 81.657] (II) intel(0): 10 bits per channel
    [ 81.657] (II) intel(0): Digital interface is DisplayPort
    [ 81.657] (II) intel(0): Max Image Size [cm]: horiz.: 52 vert.: 32
    [ 81.657] (II) intel(0): Gamma: 2.20
    [ 81.657] (II) intel(0): DPMS capabilities: StandBy Suspend Off
    [ 81.657] (II) intel(0): Supported color encodings: RGB 4:4:4
    [ 81.657] (II) intel(0): First detailed timing is preferred mode
    [ 81.657] (II) intel(0): Preferred mode is native pixel format and refresh rate
    [ 81.657] (II) intel(0): redX: 0.679 redY: 0.310 greenX: 0.210 greenY: 0.686
    [ 81.657] (II) intel(0): blueX: 0.149 blueY: 0.047 whiteX: 0.313 whiteY: 0.329
    [ 81.657] (II) intel(0): Supported established timings:
    [ 81.657] (II) intel(0): 720x400@70Hz
    [ 81.657] (II) intel(0): 640x480@60Hz
    [ 81.657] (II) intel(0): 640x480@67Hz
    [ 81.657] (II) intel(0): 640x480@72Hz
    [ 81.657] (II) intel(0): 640x480@75Hz
    [ 81.657] (II) intel(0): 800x600@56Hz
    [ 81.657] (II) intel(0): 800x600@60Hz
    [ 81.657] (II) intel(0): 800x600@72Hz
    [ 81.657] (II) intel(0): 800x600@75Hz
    [ 81.657] (II) intel(0): 832x624@75Hz
    [ 81.657] (II) intel(0): 1024x768@60Hz
    [ 81.657] (II) intel(0): 1024x768@70Hz
    [ 81.657] (II) intel(0): 1024x768@75Hz
    [ 81.657] (II) intel(0): 1280x1024@75Hz
    [ 81.657] (II) intel(0): 1152x864@75Hz
    [ 81.657] (II) intel(0): Manufacturer's mask: 0
    [ 81.657] (II) intel(0): Supported standard timings:
    [ 81.657] (II) intel(0): #0: hsize: 1280 vsize 720 refresh: 60 vid: 49281
    [ 81.657] (II) intel(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    [ 81.657] (II) intel(0): #2: hsize: 1400 vsize 1050 refresh: 60 vid: 16528
    [ 81.657] (II) intel(0): #3: hsize: 1360 vsize 765 refresh: 60 vid: 49291
    [ 81.657] (II) intel(0): #4: hsize: 1440 vsize 900 refresh: 60 vid: 149
    [ 81.657] (II) intel(0): #5: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
    [ 81.657] (II) intel(0): #6: hsize: 1680 vsize 1050 refresh: 60 vid: 179
    [ 81.657] (II) intel(0): #7: hsize: 1920 vsize 1200 refresh: 60 vid: 209
    [ 81.657] (II) intel(0): Supported detailed timing:
    [ 81.657] (II) intel(0): clock: 154.0 MHz Image Size: 518 x 324 mm
    [ 81.657] (II) intel(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0
    [ 81.657] (II) intel(0): v_active: 1200 v_sync: 1203 v_sync_end 1209 v_blanking: 1235 v_border: 0
    [ 81.657] (II) intel(0): Ranges: V min: 50 V max: 85 Hz, H min: 31 H max: 92 kHz, PixClock max 165 MHz
    [ 81.657] (II) intel(0): Monitor name: PA241W
    [ 81.657] (II) intel(0): Serial No: 18107120UB
    [ 81.657] (II) intel(0): EDID (in hex):
    [ 81.657] (II) intel(0): 00ffffffffffff0038a3d16700000000
    [ 81.657] (II) intel(0): 21150104b5342078e2de45ad4f35af26
    [ 81.657] (II) intel(0): 0c5054bfef8081c0818090408bc09500
    [ 81.657] (II) intel(0): a940b300d100283c80a070b023403020
    [ 81.657] (II) intel(0): 360006442100001a000000fd0032551f
    [ 81.657] (II) intel(0): 5c10000a202020202020000000fc0050
    [ 81.657] (II) intel(0): 41323431570a202020202020000000ff
    [ 81.657] (II) intel(0): 00313831303731323055420a2020004b
    [ 81.657] (II) intel(0): Printing probed modes for output DP2
    [ 81.657] (II) intel(0): Modeline "1920x1200"x60.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz eP)
    [ 81.657] (II) intel(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
    [ 81.657] (II) intel(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
    [ 81.657] (II) intel(0): Modeline "1680x945"x60.0 131.48 1680 1784 1960 2240 945 946 949 978 -hsync +vsync (58.7 kHz)
    [ 81.657] (II) intel(0): Modeline "1400x1050"x74.9 156.00 1400 1504 1648 1896 1050 1053 1057 1099 -hsync +vsync (82.3 kHz e)
    [ 81.657] (II) intel(0): Modeline "1400x1050"x60.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz e)
    [ 81.657] (II) intel(0): Modeline "1600x900"x60.0 118.96 1600 1696 1864 2128 900 901 904 932 -hsync +vsync (55.9 kHz)
    [ 81.657] (II) intel(0): Modeline "1280x1024"x85.0 157.50 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync (91.1 kHz e)
    [ 81.657] (II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 81.657] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 81.657] (II) intel(0): Modeline "1440x900"x84.8 157.00 1440 1544 1696 1952 900 903 909 948 -hsync +vsync (80.4 kHz e)
    [ 81.657] (II) intel(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
    [ 81.657] (II) intel(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
    [ 81.657] (II) intel(0): Modeline "1280x960"x85.0 148.50 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync (85.9 kHz e)
    [ 81.657] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
    [ 81.657] (II) intel(0): Modeline "1360x768"x59.8 84.75 1366 1431 1567 1776 768 771 781 798 -hsync +vsync (47.7 kHz)
    [ 81.657] (II) intel(0): Modeline "1360x768"x60.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz e)
    [ 81.657] (II) intel(0): Modeline "1280x800"x84.9 122.50 1280 1360 1496 1712 800 803 809 843 -hsync +vsync (71.6 kHz e)
    [ 81.657] (II) intel(0): Modeline "1280x800"x74.9 106.50 1280 1360 1488 1696 800 803 809 838 -hsync +vsync (62.8 kHz e)
    [ 81.657] (II) intel(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 +hsync -vsync (49.7 kHz e)
    [ 81.657] (II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 81.657] (II) intel(0): Modeline "1280x768"x84.8 117.50 1280 1360 1496 1712 768 771 778 809 -hsync +vsync (68.6 kHz e)
    [ 81.657] (II) intel(0): Modeline "1280x768"x74.9 102.25 1280 1360 1488 1696 768 771 778 805 +hsync -vsync (60.3 kHz e)
    [ 81.657] (II) intel(0): Modeline "1280x768"x59.9 79.50 1280 1344 1472 1664 768 771 778 798 -hsync +vsync (47.8 kHz e)
    [ 81.657] (II) intel(0): Modeline "1280x720"x60.0 74.44 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.7 kHz)
    [ 81.658] (II) intel(0): Modeline "1024x768"x85.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz e)
    [ 81.658] (II) intel(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
    [ 81.658] (II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
    [ 81.658] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 81.658] (II) intel(0): Modeline "1024x576"x60.0 46.97 1024 1064 1168 1312 576 577 580 597 -hsync +vsync (35.8 kHz)
    [ 81.658] (II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
    [ 81.658] (II) intel(0): Modeline "800x600"x85.1 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz e)
    [ 81.658] (II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
    [ 81.658] (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 81.658] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 81.658] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 81.658] (II) intel(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e)
    [ 81.658] (II) intel(0): Modeline "640x480"x85.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz e)
    [ 81.658] (II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
    [ 81.658] (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 81.658] (II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
    [ 81.658] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 81.658] (II) intel(0): Modeline "720x400"x85.0 35.50 720 756 828 936 400 401 404 446 -hsync +vsync (37.9 kHz e)
    [ 81.658] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 81.658] (II) intel(0): Modeline "640x400"x85.1 31.50 640 672 736 832 400 401 404 445 -hsync +vsync (37.9 kHz e)
    [ 81.658] (II) intel(0): Modeline "640x350"x85.1 31.50 640 672 736 832 350 382 385 445 +hsync -vsync (37.9 kHz e)
    [ 81.700] (II) intel(0): EDID for output DP3
    [ 81.700] (II) intel(0): Output LVDS1 connected
    [ 81.700] (II) intel(0): Output VGA1 disconnected
    [ 81.700] (II) intel(0): Output HDMI1 disconnected
    [ 81.700] (II) intel(0): Output DP1 disconnected
    [ 81.700] (II) intel(0): Output HDMI2 disconnected
    [ 81.700] (II) intel(0): Output HDMI3 disconnected
    [ 81.700] (II) intel(0): Output DP2 connected
    [ 81.700] (II) intel(0): Output DP3 disconnected
    [ 81.700] (II) intel(0): Using exact sizes for initial modes
    [ 81.700] (II) intel(0): Output LVDS1 using initial mode 1600x900
    [ 81.700] (II) intel(0): Output DP2 using initial mode 1600x900
    [ 81.700] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 81.700] (II) intel(0): Kernel page flipping support detected, enabling
    [ 81.700] (**) intel(0): Display dimensions: (310, 170) mm
    [ 81.700] (**) intel(0): DPI set to (131, 134)
    [ 81.700] (II) Loading sub module "fb"
    [ 81.700] (II) LoadModule: "fb"
    [ 81.701] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 81.701] (II) Module fb: vendor="X.Org Foundation"
    [ 81.701] compiled for 1.12.4, module version = 1.0.0
    [ 81.701] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 81.701] (II) Loading sub module "dri2"
    [ 81.701] (II) LoadModule: "dri2"
    [ 81.701] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 81.701] (II) Module dri2: vendor="X.Org Foundation"
    [ 81.701] compiled for 1.12.4, module version = 1.2.0
    [ 81.701] ABI class: X.Org Server Extension, version 6.0
    [ 81.701] (==) Depth 24 pixmap format is 32 bpp
    [ 81.702] (II) intel(0): [DRI2] Setup complete
    [ 81.702] (II) intel(0): [DRI2] DRI driver: i965
    [ 81.702] (II) intel(0): Allocated new frame buffer 1600x900 stride 6656, tiled
    [ 81.704] (II) UXA(0): Driver registered support for the following operations:
    [ 81.704] (II) solid
    [ 81.704] (II) copy
    [ 81.704] (II) composite (RENDER acceleration)
    [ 81.704] (II) put_image
    [ 81.704] (II) get_image
    [ 81.704] (==) intel(0): Backing store disabled
    [ 81.704] (==) intel(0): Silken mouse enabled
    [ 81.704] (II) intel(0): Initializing HW Cursor
    [ 81.704] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 81.707] (==) intel(0): DPMS enabled
    [ 81.707] (==) intel(0): Intel XvMC decoder enabled
    [ 81.707] (II) intel(0): Set up textured video
    [ 81.707] (II) intel(0): [XvMC] xvmc_vld driver initialized.
    [ 81.707] (II) intel(0): direct rendering: DRI2 Enabled
    [ 81.707] (==) intel(0): hotplug detection: "enabled"
    [ 82.106] (--) RandR disabled
    [ 82.107] (II) Initializing built-in extension Generic Event Extension
    [ 82.107] (II) Initializing built-in extension SHAPE
    [ 82.107] (II) Initializing built-in extension MIT-SHM
    [ 82.107] (II) Initializing built-in extension XInputExtension
    [ 82.107] (II) Initializing built-in extension XTEST
    [ 82.107] (II) Initializing built-in extension BIG-REQUESTS
    [ 82.107] (II) Initializing built-in extension SYNC
    [ 82.107] (II) Initializing built-in extension XKEYBOARD
    [ 82.107] (II) Initializing built-in extension XC-MISC
    [ 82.107] (II) Initializing built-in extension SECURITY
    [ 82.107] (II) Initializing built-in extension XINERAMA
    [ 82.107] (II) Initializing built-in extension XFIXES
    [ 82.107] (II) Initializing built-in extension RENDER
    [ 82.107] (II) Initializing built-in extension RANDR
    [ 82.107] (II) Initializing built-in extension COMPOSITE
    [ 82.107] (II) Initializing built-in extension DAMAGE
    [ 82.119] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    [ 82.119] (II) AIGLX: enabled GLX_INTEL_swap_event
    [ 82.119] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    [ 82.119] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    [ 82.119] (II) AIGLX: Loaded and initialized i965
    [ 82.119] (II) GLX: Initialized DRI2 GL provider for screen 0
    [ 82.119] (II) intel(0): Setting screen physical size to 423 x 238
    [ 82.158] (II) config/udev: Adding input device Power Button (/dev/input/event4)
    [ 82.158] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 82.158] (II) LoadModule: "evdev"
    [ 82.159] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 82.159] (II) Module evdev: vendor="X.Org Foundation"
    [ 82.159] compiled for 1.12.3.901, module version = 2.7.3
    [ 82.159] Module class: X.Org XInput Driver
    [ 82.159] ABI class: X.Org XInput driver, version 16.0
    [ 82.159] (II) Using input driver 'evdev' for 'Power Button'
    [ 82.159] (**) Power Button: always reports core events
    [ 82.159] (**) evdev: Power Button: Device: "/dev/input/event4"
    [ 82.159] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 82.159] (--) evdev: Power Button: Found keys
    [ 82.159] (II) evdev: Power Button: Configuring as keyboard
    [ 82.159] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
    [ 82.160] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 82.160] (**) Option "xkb_rules" "evdev"
    [ 82.160] (**) Option "xkb_model" "evdev"
    [ 82.160] (**) Option "xkb_layout" "de"
    [ 82.160] (**) Option "xkb_variant" "nodeadkeys"
    [ 82.193] (II) config/udev: Adding input device Video Bus (/dev/input/event12)
    [ 82.193] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 82.193] (II) Using input driver 'evdev' for 'Video Bus'
    [ 82.193] (**) Video Bus: always reports core events
    [ 82.193] (**) evdev: Video Bus: Device: "/dev/input/event12"
    [ 82.193] (--) evdev: Video Bus: Vendor 0 Product 0x6
    [ 82.193] (--) evdev: Video Bus: Found keys
    [ 82.193] (II) evdev: Video Bus: Configuring as keyboard
    [ 82.193] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input12/event12"
    [ 82.193] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
    [ 82.193] (**) Option "xkb_rules" "evdev"
    [ 82.193] (**) Option "xkb_model" "evdev"
    [ 82.193] (**) Option "xkb_layout" "de"
    [ 82.193] (**) Option "xkb_variant" "nodeadkeys"
    [ 82.195] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
    [ 82.195] (II) No input driver specified, ignoring this device.
    [ 82.195] (II) This device may have been added with another device file.
    [ 82.195] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
    [ 82.195] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
    [ 82.195] (II) Using input driver 'evdev' for 'Sleep Button'
    [ 82.195] (**) Sleep Button: always reports core events
    [ 82.195] (**) evdev: Sleep Button: Device: "/dev/input/event3"
    [ 82.195] (--) evdev: Sleep Button: Vendor 0 Product 0x3
    [ 82.195] (--) evdev: Sleep Button: Found keys
    [ 82.195] (II) evdev: Sleep Button: Configuring as keyboard
    [ 82.195] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3/event3"
    [ 82.195] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
    [ 82.195] (**) Option "xkb_rules" "evdev"
    [ 82.196] (**) Option "xkb_model" "evdev"
    [ 82.196] (**) Option "xkb_layout" "de"
    [ 82.196] (**) Option "xkb_variant" "nodeadkeys"
    [ 82.197] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/event1)
    [ 82.197] (**) Logitech USB-PS/2 Optical Mouse: Applying InputClass "evdev pointer catchall"
    [ 82.197] (II) Using input driver 'evdev' for 'Logitech USB-PS/2 Optical Mouse'
    [ 82.197] (**) Logitech USB-PS/2 Optical Mouse: always reports core events
    [ 82.197] (**) evdev: Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event1"
    [ 82.197] (--) evdev: Logitech USB-PS/2 Optical Mouse: Vendor 0x46d Product 0xc01e
    [ 82.197] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found 12 mouse buttons
    [ 82.197] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
    [ 82.197] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found relative axes
    [ 82.197] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
    [ 82.197] (II) evdev: Logitech USB-PS/2 Optical Mouse: Configuring as mouse
    [ 82.197] (II) evdev: Logitech USB-PS/2 Optical Mouse: Adding scrollwheel support
    [ 82.197] (**) evdev: Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
    [ 82.197] (**) evdev: Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 82.197] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input1/event1"
    [ 82.197] (II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE, id 9)
    [ 82.197] (II) evdev: Logitech USB-PS/2 Optical Mouse: initialized for relative axes.
    [ 82.197] (**) Logitech USB-PS/2 Optical Mouse: (accel) keeping acceleration scheme 1
    [ 82.197] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration profile 0
    [ 82.197] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration factor: 2.000
    [ 82.197] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration threshold: 4
    [ 82.197] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/mouse0)
    [ 82.197] (II) No input driver specified, ignoring this device.
    [ 82.197] (II) This device may have been added with another device file.
    [ 82.197] (II) config/udev: Adding input device Integrated Camera (/dev/input/event10)
    [ 82.197] (**) Integrated Camera: Applying InputClass "evdev keyboard catchall"
    [ 82.197] (II) Using input driver 'evdev' for 'Integrated Camera'
    [ 82.197] (**) Integrated Camera: always reports core events
    [ 82.197] (**) evdev: Integrated Camera: Device: "/dev/input/event10"
    [ 82.197] (--) evdev: Integrated Camera: Vendor 0x4f2 Product 0xb221
    [ 82.197] (--) evdev: Integrated Camera: Found keys
    [ 82.197] (II) evdev: Integrated Camera: Configuring as keyboard
    [ 82.197] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input10/event10"
    [ 82.197] (II) XINPUT: Adding extended input device "Integrated Camera" (type: KEYBOARD, id 10)
    [ 82.197] (**) Option "xkb_rules" "evdev"
    [ 82.197] (**) Option "xkb_model" "evdev"
    [ 82.197] (**) Option "xkb_layout" "de"
    [ 82.197] (**) Option "xkb_variant" "nodeadkeys"
    [ 82.198] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event13)
    [ 82.198] (II) No input driver specified, ignoring this device.
    [ 82.198] (II) This device may have been added with another device file.
    [ 82.198] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event14)
    [ 82.198] (II) No input driver specified, ignoring this device.
    [ 82.198] (II) This device may have been added with another device file.
    [ 82.198] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event15)
    [ 82.198] (II) No input driver specified, ignoring this device.
    [ 82.198] (II) This device may have been added with another device file.
    [ 82.198] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event16)
    [ 82.198] (II) No input driver specified, ignoring this device.
    [ 82.198] (II) This device may have been added with another device file.
    [ 82.198] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event17)
    [ 82.198] (II) No input driver specified, ignoring this device.
    [ 82.198] (II) This device may have been added with another device file.
    [ 82.198] (II) config/udev: Adding input device HDA Intel PCH Dock Mic (/dev/input/event18)
    [ 82.198] (II) No input driver specified, ignoring this device.
    [ 82.198] (II) This device may have been added with another device file.
    [ 82.198] (II) config/udev: Adding input device HDA Intel PCH Dock Headphone (/dev/input/event19)
    [ 82.198] (II) No input driver specified, ignoring this device.
    [ 82.198] (II) This device may have been added with another device file.
    [ 82.198] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event20)
    [ 82.198] (II) No input driver specified, ignoring this device.
    [ 82.198] (II) This device may have been added with another device file.
    [ 82.199] (II) config/udev: Adding input device HID 046a:0101 (/dev/input/event5)
    [ 82.199] (**) HID 046a:0101: Applying InputClass "evdev keyboard catchall"
    [ 82.199] (II) Using input driver 'evdev' for 'HID 046a:0101'
    [ 82.199] (**) HID 046a:0101: always reports core events
    [ 82.199] (**) evdev: HID 046a:0101: Device: "/dev/input/event5"
    [ 82.199] (--) evdev: HID 046a:0101: Vendor 0x46a Product 0x101
    [ 82.199] (--) evdev: HID 046a:0101: Found keys
    [ 82.199] (II) evdev: HID 046a:0101: Configuring as keyboard
    [ 82.199] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input5/event5"
    [ 82.199] (II) XINPUT: Adding extended input device "HID 046a:0101" (type: KEYBOARD, id 11)
    [ 82.199] (**) Option "xkb_rules" "evdev"
    [ 82.199] (**) Option "xkb_model" "evdev"
    [ 82.199] (**) Option "xkb_layout" "de"
    [ 82.199] (**) Option "xkb_variant" "nodeadkeys"
    [ 82.199] (II) config/udev: Adding input device HID 046a:0101 (/dev/input/event7)
    [ 82.199] (**) HID 046a:0101: Applying InputClass "evdev keyboard catchall"
    [ 82.199] (II) Using input driver 'evdev' for 'HID 046a:0101'
    [ 82.199] (**) HID 046a:0101: always reports core events
    [ 82.199] (**) evdev: HID 046a:0101: Device: "/dev/input/event7"
    [ 82.199] (--) evdev: HID 046a:0101: Vendor 0x46a Product 0x101
    [ 82.199] (--) evdev: HID 046a:0101: Found 1 mouse buttons
    [ 82.199] (--) evdev: HID 046a:0101: Found scroll wheel(s)
    [ 82.199] (--) evdev: HID 046a:0101: Found relative axes
    [ 82.199] (II) evdev: HID 046a:0101: Forcing relative x/y axes to exist.
    [ 82.199] (--) evdev: HID 046a:0101: Found absolute axes
    [ 82.199] (II) evdev: HID 046a:0101: Forcing absolute x/y axes to exist.
    [ 82.199] (--) evdev: HID 046a:0101: Found keys
    [ 82.199] (II) evdev: HID 046a:0101: Configuring as mouse
    [ 82.199] (II) evdev: HID 046a:0101: Configuring as keyboard
    [ 82.199] (II) evdev: HID 046a:0101: Adding scrollwheel support
    [ 82.199] (**) evdev: HID 046a:0101: YAxisMapping: buttons 4 and 5
    [ 82.199] (**) evdev: HID 046a:0101: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 82.199] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/input/input7/event7"
    [ 82.199] (II) XINPUT: Adding extended input device "HID 046a:0101" (type: KEYBOARD, id 12)
    [ 82.199] (**) Option "xkb_rules" "evdev"
    [ 82.199] (**) Option "xkb_model" "evdev"
    [ 82.199] (**) Option "xkb_layout" "de"
    [ 82.199] (**) Option "xkb_variant" "nodeadkeys"
    [ 82.199] (II) evdev: HID 046a:0101: initialized for relative axes.
    [ 82.199] (WW) evdev: HID 046a:0101: ignoring absolute axes.
    [ 82.199] (**) HID 046a:0101: (accel) keeping acceleration scheme 1
    [ 82.199] (**) HID 046a:0101: (accel) acceleration profile 0
    [ 82.199] (**) HID 046a:0101: (accel) acceleration factor: 2.000
    [ 82.199] (**) HID 046a:0101: (accel) acceleration threshold: 4
    [ 82.200] (II) config/udev: Adding input device HID 046a:0101 (/dev/input/event8)
    [ 82.200] (**) HID 046a:0101: Applying InputClass "evdev pointer catchall"
    [ 82.200] (II) Using input driver 'evdev' for 'HID 046a:0101'
    [ 82.200] (**) HID 046a:0101: always reports core events
    [ 82.200] (**) evdev: HID 046a:0101: Device: "/dev/input/event8"
    [ 82.200] (--) evdev: HID 046a:0101: Vendor 0x46a Product 0x101
    [ 82.200] (--) evdev: HID 046a:0101: Found 9 mouse buttons
    [ 82.200] (--) evdev: HID 046a:0101: Found scroll wheel(s)
    [ 82.200] (--) evdev: HID 046a:0101: Found relative axes
    [ 82.200] (--) evdev: HID 046a:0101: Found x and y relative axes
    [ 82.200] (II) evdev: HID 046a:0101: Configuring as mouse
    [ 82.200] (II) evdev: HID 046a:0101: Adding scrollwheel support
    [ 82.200] (**) evdev: HID 046a:0101: YAxisMapping: buttons 4 and 5
    [ 82.200] (**) evdev: HID 046a:0101: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 82.200] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.2/input/input8/event8"
    [ 82.200] (II) XINPUT: Adding extended input device "HID 046a:0101" (type: MOUSE, id 13)
    [ 82.200] (II) evdev: HID 046a:0101: initialized for relative axes.
    [ 82.200] (**) HID 046a:0101: (accel) keeping acceleration scheme 1
    [ 82.200] (**) HID 046a:0101: (accel) acceleration profile 0
    [ 82.200] (**) HID 046a:0101: (accel) acceleration factor: 2.000
    [ 82.200] (**) HID 046a:0101: (accel) acceleration threshold: 4
    [ 82.200] (II) config/udev: Adding input device HID 046a:0101 (/dev/input/mouse1)
    [ 82.200] (II) No input driver specified, ignoring this device.
    [ 82.200] (II) This device may have been added with another device file.
    [ 82.200] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 82.200] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 82.200] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [ 82.200] (**) AT Translated Set 2 keyboard: always reports core events
    [ 82.200] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 82.200] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
    [ 82.200] (--) evdev: AT Translated Set 2 keyboard: Found keys
    [ 82.200] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
    [ 82.200] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [ 82.200] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14)
    [ 82.200] (**) Option "xkb_rules" "evdev"
    [ 82.200] (**) Option "xkb_model" "evdev"
    [ 82.200] (**) Option "xkb_layout" "de"
    [ 82.200] (**) Option "xkb_variant" "nodeadkeys"
    [ 82.201] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event11)
    [ 82.201] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
    [ 82.201] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
    [ 82.201] (II) LoadModule: "synaptics"
    [ 82.201] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    [ 82.201] (II) Module synaptics: vendor="X.Org Foundation"
    [ 82.201] compiled for 1.12.2, module version = 1.6.2
    [ 82.201] Module class: X.Org XInput Driver
    [ 82.201] ABI class: X.Org XInput driver, version 16.0
    [ 82.201] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
    [ 82.201] (**) SynPS/2 Synaptics TouchPad: always reports core events
    [ 82.201] (**) Option "Device" "/dev/input/event11"
    [ 82.203] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
    [ 82.203] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5888
    [ 82.203] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4820
    [ 82.203] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
    [ 82.203] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
    [ 82.203] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
    [ 82.203] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
    [ 82.203] (**) Option "TapButton1" "1"
    [ 82.203] (**) Option "TapButton2" "2"
    [ 82.203] (**) Option "TapButton3" "3"
    [ 82.203] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    [ 82.203] (**) SynPS/2 Synaptics TouchPad: always reports core events
    [ 82.204] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input11/event11"
    [ 82.204] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 15)
    [ 82.204] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
    [ 82.204] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
    [ 82.204] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.036
    [ 82.204] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
    [ 82.204] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
    [ 82.204] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
    [ 82.204] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
    [ 82.204] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    [ 82.204] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse2)
    [ 82.204] (II) No input driver specified, ignoring this device.
    [ 82.204] (II) This device may have been added with another device file.
    [ 82.204] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event21)
    [ 82.204] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall"
    [ 82.204] (II) Using input driver 'evdev' for 'TPPS/2 IBM TrackPoint'
    [ 82.204] (**) TPPS/2 IBM TrackPoint: always reports core events
    [ 82.204] (**) evdev: TPPS/2 IBM TrackPoint: Device: "/dev/input/event21"
    [ 82.204] (--) evdev: TPPS/2 IBM TrackPoint: Vendor 0x2 Product 0xa
    [ 82.204] (--) evdev: TPPS/2 IBM TrackPoint: Found 3 mouse buttons
    [ 82.204] (--) evdev: TPPS/2 IBM TrackPoint: Found relative axes
    [ 82.204] (--) evdev: TPPS/2 IBM TrackPoint: Found x and y relative axes
    [ 82.204] (II) evdev: TPPS/2 IBM TrackPoint: Configuring as mouse
    [ 82.204] (**) evdev: TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
    [ 82.204] (**) evdev: TPPS/2 IBM TrackPoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 82.204] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/serio2/input/input21/event21"
    [ 82.204] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 16)
    [ 82.205] (II) evdev: TPPS/2 IBM TrackPoint: initialized for relative axes.
    [ 82.205] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
    [ 82.205] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0
    [ 82.205] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
    [ 82.205] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
    [ 82.205] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse3)
    [ 82.205] (II) No input driver specified, ignoring this device.
    [ 82.205] (II) This device may have been added with another device file.
    [ 82.205] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
    [ 82.205] (II) No input driver specified, ignoring this device.
    [ 82.205] (II) This device may have been added with another device file.
    [ 82.205] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event9)
    [ 82.205] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall"
    [ 82.205] (II) Using input driver 'evdev' for 'ThinkPad Extra Buttons'
    [ 82.205] (**) ThinkPad Extra Buttons: always reports core events
    [ 82.205] (**) evdev: ThinkPad Extra Buttons: Device: "/dev/input/event9"
    [ 82.205] (--) evdev: ThinkPad Extra Buttons: Vendor 0x17aa Product 0x5054
    [ 82.205] (--) evdev: ThinkPad Extra Buttons: Found keys
    [ 82.205] (II) evdev: ThinkPad Extra Buttons: Configuring as keyboard
    [ 82.205] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input9/event9"
    [ 82.205] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 17)
    [ 82.205] (**) Option "xkb_rules" "evdev"
    [ 82.205] (**) Option "xkb_model" "evdev"
    [ 82.205] (**) Option "xkb_layout" "de"
    [ 82.205] (**) Option "xkb_variant" "nodeadkeys"
    [ 82.222] (II) intel(0): EDID vendor "AUO", prod id 8510
    [ 82.222] (II) intel(0): Printing DDC gathered Modelines:
    [ 82.222] (II) intel(0): Modeline "1600x900"x0.0 110.00 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (54.7 kHz eP)
    [ 82.222] (II) intel(0): Modeline "1600x900"x0.0 73.33 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (36.5 kHz e)
    [ 82.415] (II) intel(0): Allocated new frame buffer 1920x1200 stride 7680, tiled
    [ 106.807] (II) AIGLX: Suspending AIGLX clients for VT switch
    [ 117.740] (II) Open ACPI successful (/var/run/acpid.socket)
    [ 117.740] (II) AIGLX: Resuming AIGLX clients after VT switch
    [ 117.767] (II) intel(0): EDID vendor "AUO", prod id 8510
    [ 117.767] (II) intel(0): Printing DDC gathered Modelines:
    [ 117.767] (II) intel(0): Modeline "1600x900"x0.0 110.00 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (54.7 kHz eP)
    [ 117.767] (II) intel(0): Modeline "1600x900"x0.0 73.33 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (36.5 kHz e)
    [ 117.959] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    I have connect my ThinkPad per Dockingstation Displayport (I try also DVI) with an NEC PA241W. It seems arch takes the 1600x900 resolution from the Laptop :-(
    I dont know what to do makes the Kernel the Problem?
    On my second PC i have there an Nvidia when i start arch for install all are perfect on my NEC i connected it with DVI
    here is my xrandr
    [frank@bullitt ~]$ xrandr
    Screen 0: minimum 320 x 200, current 1920 x 1200, maximum 8192 x 8192
    LVDS1 connected 1600x900+0+0 (normal left inverted right x axis y axis) 309mm x 174mm
    1600x900 60.0*+ 40.0
    1024x768 60.0
    800x600 60.3 56.2
    640x480 59.9
    VGA1 disconnected (normal left inverted right x axis y axis)
    HDMI1 disconnected (normal left inverted right x axis y axis)
    DP1 disconnected (normal left inverted right x axis y axis)
    HDMI2 disconnected (normal left inverted right x axis y axis)
    HDMI3 disconnected (normal left inverted right x axis y axis)
    DP2 connected 1920x1200+0+0 (normal left inverted right x axis y axis) 518mm x 324mm
    1920x1200 60.0*+
    1600x1200 60.0
    1680x1050 60.0
    1680x945 60.0
    1400x1050 74.9 60.0
    1600x900 60.0
    1280x1024 85.0 75.0 60.0
    1440x900 84.8 75.0 59.9
    1280x960 85.0 60.0
    1360x768 59.8 60.0
    1280x800 84.9 74.9 59.8
    1152x864 75.0
    1280x768 84.8 74.9 59.9
    1280x720 60.0
    1024x768 85.0 75.1 70.1 60.0
    1024x576 60.0
    832x624 74.6
    800x600 85.1 72.2 75.0 60.3 56.2
    848x480 60.0
    640x480 85.0 72.8 75.0 66.7 60.0
    720x400 85.0 70.1
    640x400 85.1
    640x350 85.1
    DP3 disconnected (normal left inverted right x axis y axis)
    Does anybody have the same kind of connected an Laptop with an external Monitor and knows what was the Problem?
    I like arch very much but so it doesnt make fun :-(
    I hope someone can help me
    the picture shows openbox with the Thunar maximized
    Last edited by kerasi (2012-10-12 23:12:12)

    @trilby
    i use my Laptop at home 95% and at work 5%
    so my first choice would be to have the perfect resolution on my NEC external and when i opened a window it would display there and i dont have to open my Laptop to move the screen to see it on my external or is it so that you must have opened the laptop display to move the windows?
    And when i would take it at work it would be perfect if i see it on the laptop with his resolution 1600x900
    i hope i explained it well.
    @anoknusa
    i change your config to this
    xrandr --output LVDS1 --mode 1600x900 --pos 0x900 --rotate normal --output DP2 --mode 1920x1200 --pos 0x0 --rotate normal
    when i start firefox it was displayes well on my external but when i opened xterm or thunar pcman i have to open my laptop and move from it up to the external do i make a mistake?
    anoknusa wrote:I stuck that in a script to run when I start X; if the external monitor isn't plugged in, only the laptop display is used.  This sets each screen to act as a seperate display; I can still drag windows between them if I wish, as well as assign windows to open on one screen or the other through DWM's configuration file.  As mentioned earlier, this is also the only way (I think) to get each screen to display at its native resolution.  Note that I specify the resolution for both my T520 LCD and my external monitor, and specify their positions (my external is mounted to the wall above my desk, directly above my laptop); change those as necessary.
    what has xrandr to look like for my external monitor and laptop?
    and what would the script look like for me?
    external 1920x1200
    T420 1600x900
    and thank you for your patience and have a nice day
    ps: i know iam very close to find a solution for my problem
    Last edited by kerasi (2012-10-11 00:05:55)

  • MacBook Pro won't sleep with external monitor

    Hello,
    have a problem. I'm using external monitor with my MacBook Pro. If I close the lid, I see all windows on external monitor and Yosemite won't sleep. Can you help me please? My external monitor is Samsung 21.5" and I'm connecting it to MacBook Pro via DVI.
    Thank you

    Hey Renecek,
    My first thought was, "Hey, you are using closed-clamshell mode".
    How to use your Mac notebook computer in closed-clamshell (display closed) mode with an external display - Apple Support
    But then I realized, wait, you want it to sleep.
    For that, check out the suggestions in these articles.
    OS X Yosemite: If your Mac won’t go to or stay in sleep
    OS X: When your Mac doesn't sleep or wake - Apple Support
    Take care,
    Nubz

  • Yosemite Won't Shutdown With External Monitor Connected

    Hi there...
    I have a MBP 2010 and I've updated Yosemite from Mavericks. Now I'm running the latest 10.10.2.
    Ever since I updated to Yosemite, I have had this problem of my computer won't shutdown when an External monitor is connected. This happens only when I put my computer to sleep.However, if I restart the computer and after logged in to the user and tried to shutdown, it shutdown without any problem. Every time I shutdown it just hangs and I had to force shutdown by press and hold the power button. Which I'm sure is not a proper way.
    Right now only my external monitor connected to my MBP. So I did unplugged the ext. monitor and tried shutdown and it works fine. But it think this is the temporary solution that I've found but it is annoying to unplug everytime I wanted to shutdown and plug it back in once the computer is up and running. Which is not idle solution at all.
    Am I the only one or a lot of people facing this issue? If there is a solution please share. Very much appreciated. Thanks.

    Updated to 10.10.3 and the problem still persist. Still unable to shutdown or restart after wake up from sleep.
    Any one affected? Is it something to do with Gfx card?

  • Strange issue with external monitor, only working when external speakers plugged in (using Thunderbolt to VGA adaptor)

    Hey – I am having a very strange issue with my external monitor; where it only works if my external speakers are plugged in and connected.
    I am using a late 2011 Macbook pro, running Mavericks 10.9.4, along with an MBox 2 (USB Audio Interface), and two powered speakers (KRK Rokit 5). This setup has had no issues. I have just acquired an external monitor (Benq T2200HD), which I am using with a thunderbolt to VGA adaptor (a cheap Chinese knockoff adaptor).
    To start - I plugged the monitor in with the thunderbolt adaptor, and it powers up and works fine. However, there is a nasty buzz coming from the speakers. I did some research and it looks like a simple ground loop issue. I did a bit of troubleshooting, and this is where things get weird.
    What I found is - If I unplug the MBox, the monitor loses signal from the computer (displaying ‘No Signal Detected!’). Further, if I keep the MBox plugged in, however unplug both the cables from the MBox to the speakers, the monitor loses signal. It doesn’t matter if the speakers are turned off, however they need to be plugged in (or the monitor loses signal). Weirder still, I can unplug the MBox, however the monitor will work if I plug in the speakers through my macs headphone jack.
    Simply put, the monitor only works if there is a direct connection between the computer, the speakers, and the power source.  What is going on here? Is the monitor grounding through the computer port, to the speakers (I don’t know how this works, is this possible?). Could it somehow be the cheap VGA adaptor I am using?
    Some other information:
    - Everything is plugged into the same multi-box for power. I have tried plugging things into separate sources, and the result is the same.
    - If I unplug the thunderbolt adaptor, then the speaker noise disappears straight away.
    - The ground noise doesn’t appear in my headphones, which are plugged into the MBox.
    Any information would be great – am I missing something here, or is this genuinely weird?

    Well, I went back into Best Buy to test on 3 other laptops (2 Asus, and their floor model for this Sony). It seems to be doing the same problem so at least I was able to rule out broken hardware issue on my particular laptop.
    Here's what I did to test:
    Since I couldn't really install Adobe Premiere on their machines, I used the DVIO software (http://www.carr-engineering.com/dvio.htm) and a 5 min clip I captured.  I transferred onto their machines, hooked up my Sony D8, and attempted to play the video.  It would play for 15 seconds and then stop and jitter with a loud noise (like it does on my laptop).  I even tried changing each machine's firewire driver to the legacy one and same results.  I pulled a brand new 4 pin to 4 pin firewire cable off their shelf and still the same problem.
    I think I've nailed it down to Win7x64 bit Home Edition not playing nice with Firewire driver.  Very annoying.  I can't find any concrete evidence of this from other users on any of the forums that have my particular problem, but from my own testing, it's all I can conclude.
    I have 2 other things I can try:
    1.  Opening the laptop and looking at the firewire to maybe find appropriate driver (ugh, I don't want to have to open this thing up).
    2.  Upgrading to Win7x64bit Pro and possibly testing with XP on the new MS Virtual PC (http://www.microsoft.com/windows/virtual-pc/).  I can't do it with my Home edition apparantly.
    Who needs to view video on an external TV anyways....sheeesh...(scarcasm).
    Tim

  • Why the Slowdown with External Monitor?

    I have a new Retina iMac with a 4 Gig Core i7 processor, 32 Gigs of RAM and 4 Gigs of VRAM and the AMD Radeon R9 M295X chipset.  My 3 TB hard drive is well under half full.  Everything works great . . . until I attach an external monitor.
    I've attached a Dell 2815Q via one of the thunderbolt ports on my iMac into the Dell's DisplayPort.  The connection is with a cable, supplied with the monitor.
    All computer functions are so painfully slow, it becomes barely usable.  Finder functions--moving windows, mouse operations are like molasses.  Scrolling is so bad that reaction time is near 5 seconds and then it continues to scroll after the physical mouse gestures cease.
    Why is this so sluggish?  I would have thought with the processing power and video capabilities of my new iMac that this problem would not occur.  When I disconnect the Dell, of course, everything is speedy again.
    Is there anything I can do to fix this?  The Dell provides beautiful images, but it is virtually worthless with the slowdown in speed.

    The warranty entitles you to complimentary phone support for the first 90 days of ownership.
    If you bought the product in the U.S. directly from Apple (not from a reseller), you have 14 days from the date of delivery in which to exchange or return it for a refund. In other countries, the return policy may be different. If you bought from a reseller, its return policy applies.

Maybe you are looking for

  • How do Excute the following Query?

    select 1 where 1 =1

  • Best way to make a high quality slide show from still images

    I know that this may have been asked before but i am trying to create a high quality slide show of my still images that will look great on a TV. I have tried imovie, idvd, and iphoto and i am not happy with the quality. i do own FCP. can anyone walk

  • Several App Icons have suddenly vanished

    I've tried to find the answer to this and while the answers I find apply to the iPad, my issue is with apps purchased for my desktop Mac's.  I realize some apps will go away if a newer version is available but in this case one app disappeared when I

  • Unable to convert FO PR to FO PO

    Hi Gurus, I had created Framework PR for a material. In that the order unit system has taken as "AU". While trying to convert this FO PR ot FO PO, system is giving error"Order unit EA is not convertiable into unit AU" of requisition. Please suggest h

  • Info Object Where Used List

    Is there any way to get a list of all of the queries that you a specific Info Object?  I've tried using the Where Used List of the Info Object in RSA1, but it doesn't seem to be working. Any Ideas?? Thanks! Tina