Re: Toshiba Store Alu 3.5" 1TB HDD not working with Windows 2008 64-bit

Just bought this as a backup device for Small Business Server 2008 which runs on Windows 2008 64-bit. However it does not recognise it? Are there any drivers anywhere for this or is it just not supported and I need to buy an alternative?
Connected it to my Windows 7 64-bit laptop and no problems there.
Anyone else had same problem?

Hi
Unfortunately, there is no other software for download.
I checked the Toshiba driver page in Options area but didnt find anything
As far as I know its a plug & play HDD so you dont need any software in order to recognize the HDD
Possibly there is a password protection.
Try this:
Connect your HDD to the PC where the HDD is working
select the CD Drive (Password) with your Explorer
run the ONSPCLCK.exe
select "Options"
select "Disable Password Security"
enter your Current Password
unplug the HDD
connect the HDD
Now it will work but without any password protection. Maybe it would works

Similar Messages

  • Old external Toshiba HDD not working with Windows 7

    I feel as if this problem is going to affect more and more people. Having searched the internet without luck, I felt the need to address the issue here!
    I have an external 320GB Toshiba HDD, model: PX1267E-1G32 which Windows 7 (64Bit Professional) does not recognise. It does not show up in my computer and states the device is not working properly. Troubleshooting does not help, and it suggests i have the latest driver for it (version 6.1.7600.16385)
    I can not find any support for this device. I have read some people trying to tackle the password protection it comes with (a separate partition with this function) but this is not an issue for me as i never use it. There are drivers on that partition as well which have no affect on windows when i have transferred them via a flash stick.
    On my laptop Windows XP is installed and it finds the HDD without any problems. This has lead me to believe there is a fault with compatibility within the newer windows systems. I have tried formatting the drive, reinstalling drivers and searching for a solution. I really can not believe this has not been resolved somewhere and fear with it being an older discontinued product (Mid 2006) there will be little support for it.
    Any help would be greatly appreciated!

    hi urbancoffy,
    boah what a hell....
    let's look if there is a cure.....
    this device is recognized under every other system than yours, right?
    if so maybe your software is misconfigured or your usb connection is bad....
    how to determine?
    try other devices like an usb-stick
    check bios if legacy usb support is on
    check device manager (device plugged in) if it shows any information like a //dev_xxxx
    if your usb port is ok
    goto device manager and remove all usb devices (show hidden devices)
    reboot and let the system determine the hub etc
    plug in usb-hdd and see if it will be detected - keep in mind: you dont have to load a driver for a usb storage device by yourself
    if the usb ports are ok and your hdd is recognized by other systems maybe it's time for a recovery of your system....
    Message was edited by: Al-eX

  • Toshiba Dvd Player not working with Windows 7

    Not sure if this is the right place to put this, since I upgraded to windows 7 the Toshiba DVD Player is not working, I click on it and nothing happens, any idea what I should do?
    Solved!
    Go to Solution.

    I found my answer
    http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/download.jsp?ct=DL&soid=2466224&ref=EV

  • Chieftec blackbox external HDD, not working with GX740 Windows 7.

    Hi
    I have a Seagate Momentus® 7200.4 750GB
                            SATA 3Gb/s, 16MB, 7200RPM, 2,5"
    using it with Chieftec CEB-25S-U3 HDD Chassi
                            2,5", SATA, USB 3.0, Aluminium, Svart/Silver
    and it doesnt seems like the computer is actually accepting it as a harddrive or something.
    It does find it, but i cant format it or use it as a harddrive, its just there.
    Ive had the same problem with another external hdd, it didnt work on my gx740 with windows7, but it did work on an older computer with windows xp.
    Dunno if it has anything to do with it, but the ENE CIR Receiver doesnt seem to be working in the computer. I dont rly know what it is tbh, but its under the HID Human interface Devices section.
    Tryed to update the driver, but it just says it the latest drivers allready.
    Ive allso had problems with the Bluetooth not working, so maybe the ENE CIR thing is the cause of that =P
    /Snorki

    ENE CIR Receiver is the infra-red receiver for Media Center remote controls (CIR = Consumer InfraRed).
    Quote
    and it doesnt seems like the computer is actually accepting it as a harddrive or something.
    It does find it, but i cant format it or use it as a harddrive, its just there.
    'Just there' where? Is the drive actually partitioned and formatted?
    See: https://forum-en.msi.com/faq/article/how-to-add-a-second-hard-drive-for-storage

  • Why does itunes store not work with windows 8

    every time i try to sign into itunes store i get an error code or itunes shuts down

    Hello daparker942,
    We've an article that can help stabilize iTunes on your system.
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/TS1717
    Cheers,
    Allen

  • HDD not working on windows because of time machine...WHAT TO DO?

    I am a new Mac user and cannot seem to get it with the external harddrives. I bought one that is supposed to be working with both windows and mac but after installing time machine (which formatted it in a non windows way i guess) it is not readable by windows. I have browsed several articles but have no idea what to do. Would it help to part it in 2 and use one part for time machine while formatting the other one to fit with windows? Would that work? I want to be able to have time machine but also randomly being able to copy music from friends with pc:s. Other people seem to be complaining after doing that (parting) mac could not read the stuff from windows. aaaargh help!!What to do???

    Okay, I copied the library to another location and when I tried to open that library by pressing option at startup to choose the library, it told me the following:
    There was an error opening the database for the library "library name". The library could not be opened because the file system of the library's volume is unsupported.
    So, I'm guessing that was a fail! I then tried the suggestion from Frank Caggiano, which also did not work. I'm feeling quite defeated. Looking for that magic touch

  • Formatting Mac HDD to work with windows files/applications

    I was thinking of partitioning the hardrive and formatting one partition whatever way I would need to in order to use it like a Windows computer, because I really have no use for my Mac, if I cant get it to run many applications that are windows exclusive. However I would need to send for the Tiger startup disk, and I dont want to pay for it unless I'm sure that this is even possible, and I want to know what I am doing
    Anyway I dont really know that much about macs, so exactly what do I need, and what do I need to do, for it to work with windows/PC files and applications?
    And My Harddrive has a total of 9.5 GB, and only four GB of free space (I dont even have anything on the computer, so I don't know what is taking so much space) is that enough space to do whatever it is i'm talking about?

    virtual PC is pretty slow, I wouldn't really recommend it at this point on an old iMac. maybe for really light duty things. Frankly, you're probably better off just selling, donating or getting rid of it and getting a cheap PC. a cheap PC is a cheap PC, and in my opinion very inferior to the mac, but it will run windows much faster.
    Or just use it as a mac. A mac can do just about anything a windows box can, and is usually more reliable. Files can be read without problems in most cases. Give it a shot.

  • Toshiba PA3542U Dynadock with Windows 7 64 bit

    Hi,
    Can someone here confirm whether Toshiba PA3542U-2PRP Dynadock will work with Windows 7 64 bit or not? This will be great help because I am planning to buy this and I have Windows 7 64 bit on my laptop. It is Toshiba Satellite Pro U500 18 J.
    Thanks.

    Satellite M645-S4070 Specifications
    Satellite M645-S4070 Downloads
    Unfortunately, you have probably wiped out the Toshiba Recovery partition on your HDD when you used the Windows 7 64bit retail disk to reinstall your OS. As well, it sounds like you never made a set of Toshiba Recovery disks before this mishap. The info for all this begins on page 61 of your Satellite M640 Series User’s Guide.
    Using the recovery utility would have rebuilt your HDD to its factory default out-of-the-box state, including the recovery partition, Win 7 64bit, all Toshiba drivers and utilities, and all software your system originally came with. If you do not think you wiped out the recovery partition when you reinstalled Windows, then while powering on the system you could try holding down the '0' (zero) key until you see the Toshiba Recovery utility menu. If this doesn't work see this article:
    Pressing the Zero Key While Powering on the Computer Does Not Start the Toshiba Recovery Wizard
    If none of the above works, you can still order a set of recovery media from Toshiba, which I would strongly recommend. Rebuilding the recovery partition, and having a set of recovery disks for backup, could save you a lot of grief on this, and on any future rebuilds.
    Ordering Recovery Media
    However, if your recovery partition won't work and you are unwilling to order a set of recovery media, then see these instructions and use this utility:
    How to Custom Install Windows 7 and add Toshiba-provided drivers & utilities with the Toshiba Softwa...
    Toshiba Software Installer for Windows 7
    Good luck.
    Mike

  • Dear sir I bought my iPhone 4 from Apple store in Charlotte N/C about 2years ago without contract. Now I tried to upgrade it to iOS 7.0.4.but after that my phone not work with last sim card. And invalid sim appeared.so I bought it without contract but it

    Dear sir
    I bought my iPhone 4 from Apple store in Charlotte N/C about 2years ago without contract.
    Now I tried to upgrade it to iOS 7.0.4.but after that my phone not work with last sim card.
    And invalid sim appeared.so I bought it without contract but it seems to be lock in my country
    Please tell me whats the matter?
    My phone serial no  86034HTCA4T
    Modem firmware  04.12.09
    Thanks

    Without contract is not the same as unlocked. The update to iOS 7 relocked
    the iPhone to the wireless carrier to which it was originally locked. You must
    contact that wireless carrier to see if they offer unlocking and if you qualify.
    If you used jailbreak or other hack to unlock the iPhone initially, the method
    used may prevent a legitimate unlock from succeeding and may render your
    iPhone unuseable.

  • I bought this iPhone from Apple Retail Store for the full amount, but  it does not work with my SIM card only works with AT&T

    Hello,
    I have an iPhone 4S 32Gb White AT&T, product part No. MC921LL/A, Serial No. C39GMLPWDTDC
    I bought this iPhone from Apple Retail Store (from Fifth Avenue, NY) for the full amount. Now it does not work with my SIM card only works with AT&T. I restored the phone several times, but I have not received "Congratulations your iPhone has been unlocked". Please activate my iPhone to work with different SIM cards
    Thanks,
    Best Wishes

    When did you buy it?
    Apple did not begin selling an unlocked version of the iPhone 4S in the US until 11/11/11. I believe it went on sale only through the online store at that time. I'm not sure if it's available at retail yet.
    What you purchased was a phone without a contract commitment. It is still locked to AT&T. AT&T will NOT unlock iPhones for any reason.  Return it and get your money back, then use that to purchase an unlocked phone.

  • My apple ID is not working with my apple store

    My apple ID is not working with my apple store

    I have the exact same problem as "Jan Olsen 1"
    I sent them feedback:
    "I was given a $25 iTunes gift card. 
    When trying to log on to my account, my password didn't work (though I entered the correct password THREE TIMES). 
    I requested help changing the password through an e-mail. Went through the process, changed the password.
    I successfully logged on to my account and entered the gift card information and was given a $25 credit.
    When I tried to buy mp3s, I was asked to enter my password - AGAIN. 
    I got one of the following messages each time I tried to enter my NEW password:
    'We could not complete your iTunes Store request. An unknown error occurred (5002).
    There was an error in the iTunes Store. Please try again later.'
    or
    'Verification is required.
    You must enter your AppleID and password, click Billing Info, and verify your payment information in order to make purchases.
    The Apple ID you entered couldn't be found or your password was incorrect. Please try again.'
    Don't know where to go from here."
    And then, just to log on to this forum, I had to enter my AppleID TWICE! Once, then again to verify my AppleID!
    Ridiculous! Frustrating!

  • HT203180 I have bought several tv seasons from the itunes store. Recently some episodes will not sync with my ipad. The error message is that the file "could not be read or written". Previous episodes of the same series synced successfully.

    I have bought several tv seasons from the itunes store. Recently some episodes will not sync with my ipad. The error message is that the file "could not be read or written". Previous episodes of the same series synced successfully. Also while watching the same episode on my laptop (Mac Book Pro) it freezes.

    I had this same message appear today when i was putting new music on my ipod touch 4th gen. The only difference is that I wasnt using an external drive. I was using the one on my computer. This is the first time i have had this problem

  • HT203421 Since installing Yosemite 10.10 the Apps Store application on my iMac does not work

    installing Yosemite 10.10 the Apps Store application on my iMac does not work properly. Applications show up in the App Store window to be updated but in fact most of them do not download and install. Some 3rd party software does download and install but most Apple and HP Applications do not. They appear in some cases in both the Ready to update or install list and in the "Installed in the last 30 days list". In some cases when I click on "Update" it shows in the "Installed in the Last 30 Days list" but it is not installed.  In the case of the latest Yosemite 10.10.3 beta down load, it momentarily show up like it is downloading but then disappears and does not install.

    I am now using Yosemite 10.10.2 and am trying to install the beta Download Yosemite 10.10.3 hoping it will resolve my problem but starts to download from the App Store snd then quits.

  • HT4972 2nd generation ipod touch is pretty much no good anymore?  It is not able to upgrade to iOS5.1 and so will not work with many of the Apps now available in the App store.  Is there any way to find out which apps will work with 2nd generat

    2nd generation ipod touch is pretty much no good anymore?  It is not able to upgrade to iOS5.1 and so will not work with many Apps in the iTunes store?  Is there a way to find out if the App will work before you download?

    Look to the app developer to provide that information when browsing the iTunes Store.
    The iPod Touch still works, so what's your problem with it? It still works with older apps, it still does what it's intended to do.
    If you aren't happy then sell it and buy a new one.

  • HT201343 I bought my macbook pro on August 2011 at an apple store, with the Intel i7. However mirrorring in not working with two of my Apple TVs. These Apple TVs are 2nd and third generation loaded with the latest software. Can someone help?

    I bought my macbook pro on August 2011 at an apple store, with the Intel i7. However mirrorring in not working with two of my Apple TVs. These Apple TVs are 2nd and 3rd generation loaded with the latest software. I can succesfully transmit from my itunes on my Macbook pro to both Apple TVs, but I can not see the airplay icon on the taskbar. Can someone help?

    About AirPlay and Airplay Mirroring
    AirPlay Mirroring requires a second-generation Apple TV or later, and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer). For non-qualifying Macs you can try using Air Parrot.
    Several Apple Articles Regarding AirPlay
    Apple TV (2nd and 3rd gen)- How to use AirPlay Mirroring
    How to set up and configure AirPort Express for AirPlay and iTunes
    About AirPlay Mirroring in OS X Mountain Lion
    iTunes 10- About playing music with AirPlay
    Troubleshooting AirPlay and AirPlay Mirroring
    Using AirPlay

Maybe you are looking for

  • How do I sync a audio recording with video?

    Hi, I recorded a concert using my DSLR and a separate sound recorder. What is the easiest way to sync these two up in PE10? I had hoped that at the least I could compare the wave files of both the original recording on the camera with the separate re

  • ALV Grid output in background Job

    Hello everyone, Can someonen plz tell me if I execute my report (with Grid ALV Display) in background (sy-batch not initial ) , will the ALV Grid be displayed ? If no, then in order to show success do I have to 'WRITE' the success message ? Thanks

  • Getting warninig while running the report

    hi all am getting warning while running the report . am getting following errors in log file . log file is given below please help me +---------------------------------------------------------------------------+ Process Manufacturing Inventory: Versi

  • Hi, how do I erase my mac?

    Hi, I am taking my iMac tomorrow to get the hard disk changed due to the Segate recall. Mine is working fine, but I want to prevent future problems. However, I do not want to take my T1 disk almost full with personal data... I have already made two c

  • RH10 Index in IE 9 and 10 - Loading In!

    Just got RoboHTML 10, and upgraded my RH 8 project.  I applied the Fixes Patch for RH10, both in Installation location (template skins) and outputs.  The patches did fix the font problems I was having in WebHelp output in the navigation panes.  And a