Re:Uploading Long text of 500 characters through LSMW

Can any1 help me out in uploading long text of 500 characters thru LSMW...Please reply ASAP..We have used Direct Input method 0004...We have a structure for long text ,but still unable to upload.

I have the same problem where the long text is not being updated through a AC02 BDC session. Did you find a solution to the problem yet?
Thanks
Johan

Similar Messages

Problem in uploading long text in service master through AC02

hi experts,
while iam recording the LSMW through T Code AC02 the system is not linking to the longtext in service master. Kindly guide me in this regard to upload service master with service long text together

I have the same problem where the long text is not being updated through a AC02 BDC session. Did you find a solution to the problem yet?
Thanks
Johan

How to upload long texts to project definitions?

Hi everyone,
Does any of you know a program for uploading long texts to project definitions?
Thanks in advance and best regards.
Txema.

Found this post in SDN ABAP forum on the similar issue , check this out it might be helpful
Project Systems WBS, Long Text Field
Regards
Sreenivas

Uploading long text as one long text for the same records.

Hi,
i am uploading long text into one custom application.in that i had one issue,
I am uploading long text with the combination of material,palnt,division,sales organization and distribution channel.
Now my reqiurement is when ever two or more than two records are same for the material,palnt,division.The respected text shulod be created as a single text.
will any body suggest me with logic, how to handle it?

Hi,
i am having records like this...
MATNR    VKORG    VTWEG    TEXT
865498    0012        00654       test1
865498    0012        00654       test2
865498    0012        00654       test3
865498    0012        00654       test4
865498    0012        00654       test5
865498    0012        00654       test6
865498    0012        00654       test7
in the above test data MATNR , VKORG, VTWEG records are same but TEXT is different.
Now my requirement is , i need to upload the data in to application as
MATNR    VKORG    VTWEG    TEXT
865498    0012        00654       test1test2test3test4test5test6test7
how can i handle it?

Upload sales text for material master using LSMW direct input method

Hello Experts,
I was trying to upload sales text for a material master using LSMW direct input method.
I followed the following steps for the same
Tab dlimited Text file format
MATNR           LONGTEXT                                                     LINE
MATERIAL1    LONGTEXT FOR MATERIAL MATERIAL1       1
Step1 -> Maintain object attributes
Object -> 0001
Method-> 0001
Program name -> /SAPDMC/SAP_LSMW_IMPORT_TEXTS
Program type -> D
Step2 -> Maintain Source Structure
Source structure -> LONG_TEXT            Source structure for long text
Step 3-> Maintain souce file
Source Fields
ZLONG_TEXT             Source structure for long text
                       MATNR                         C(018)    MATNR
                       LTEXT                          C(132)    LTEXT
Step 4-> Maintain structure relationship
Structure Relations
/SAPDMC/LTXTH Long Texts: Header                                           <<<< ZLONG_TEXT Source structure for long text
              Select Target Structure /SAPDMC/LTXTH .
/SAPDMC/LTXTL Long Texts: Row                                              <<<< ZLONG_TEXT Source structure for long text
             Select Target Structure /SAPDMC/LTXTL .
Step 5-> Maintain Field mapping and conversion rules
Here i have assigned constan rules to couple of them like
/SAPDMC/LTXTH                  Long Texts: Header
Fields
   OBJECT                Texts: Application Object
                                Rule :   Constant
                                Code:    /SAPDMC/LTXTH-OBJECT = 'MVKE'.
   NAME                  Name
                                Source: ZLONG_TEXT-MATNR (MATNR)
                                Rule :   Transfer (MOVE)
                                Code:    /SAPDMC/LTXTH-NAME = ZLONG_TEXT-MATNR.
   ID                         Text ID
                                Rule :   Constant
                                Code:    /SAPDMC/LTXTH-ID = '0001'.
   SPRAS                 Language Key
                                Rule :   Constant
                                Code:    /SAPDMC/LTXTH-SPRAS = 'E'.
/SAPDMC/LTXTL                  Long Texts: Row
Fields
    TEXTFORMAT     Tag column
                                Rule :   Constant
                                Code:    /SAPDMC/LTXTL-TEXTFORMAT = '/'.
    TEXTLINE             Text Line
                                Source: ZLONG_TEXT-LTEXT (LTEXT)
                                Rule :   Transfer (MOVE)
                                Code:    /SAPDMC/LTXTL-TEXTLINE = ZLONG_TEXT-LTEXT.
Step6 -> Specify file
Legacy Data          On the PC (Frontend)
             Data                           D:\Sales_Longtext.txt
Step7 -> Assign File
ZLONG_TEXT Source structure for long text
              Data D:\Sales_Longtext.txt
Step8 -> Read data
Output result
Source Structure             Read      Written        Not Written
ZLONG_TEXT              1                1              0
Transactions Read:            1
Records Read:                   1
Transactions Written:         1
Records Written:                 1
Step 8 -> Display read data
Field Name                    Field Text Field Value
MATNR                          MATNR      MATERIA1
LTEXT                            LTEXT      SALES TEXT FOR Material MATERIAL1
Step 9 -> Convert data
File Read:          ZNRD_PRJ1_ZNRD_SUBPRJ2_ZNRD_LTEXT.lsmw.read
File Written:       ZNRD_PRJ1_ZNRD_SUBPRJ2_ZNRD_LTEXT.lsmw.conv
Transactions Read:                 1
Records Read:                        1
Transactions Written:              1
Records Written:                     2
Step 10 -> Display converted data
1 /SAPDMC/LTXTH                   1MVKE      MATERIAL1                                                                   0001E
2 /SAPDMC/LTXTL                   2/ SALES TEXT FOR Material MATERIAL1
Step 11 -> Start direct input program
Output result for the same
Legacy System Migration Workbench
Project:                              ZNRD_PRJ1       ORH
Subproject:                        ZNRD_SUBPRJ2    Upload long text
Object:                               ZNRD_LTEXT      Long text tru direct input
File :                                   ZNRD_PRJ1_ZNRD_SUBPRJ2_ZNRD_LTEXT.lsmw.conv
Long Texts in Total:                                1
Successfully Transferred Long Texts: 1
Non-Transferred Long Texts:                 0
Now when i check the material master sales view -> sales text it is empty.
Please help me with the same.
Regards,
Ranjith N

Hello Experts, I was trying to upload sales text for a material master using LSMW direct input method.
I followed the following steps for the same
Tab dlimited Text file format
MATNR             LONGTEXT                                              LINE
MATERIAL1     LONGTEXT FOR MATERIAL MATERIAL1 1 *************************************************************************************************************
Step1 -> Maintain object attributes
Object -> 0001
Method-> 0001
Program name -> /SAPDMC/SAP_LSMW_IMPORT_TEXTS
Program type -> D
Step2 -> Maintain Source Structure
Source structure -> LONG_TEXT Source structure for long text
Step 3-> Maintain souce file Source Fields
ZLONG_TEXT Source structure for long text
MATNR C(018) MATNR
LTEXT C(132) LTEXT
Step 4-> Maintain structure relationship
Structure Relations
/SAPDMC/LTXTH Long Texts: Header <<<< ZLONG_TEXT Source structure for long text
Select Target Structure
/SAPDMC/LTXTH . /SAPDMC/LTXTL Long Texts: Row <<<< ZLONG_TEXT Source structure for long text
Select Target Structure /SAPDMC/LTXTL .
Step 5-> Maintain Field mapping and conversion rules
Here i have assigned constan rules to couple of them like
/SAPDMC/LTXTH Long Texts: Header
Fields
OBJECT            Texts: Application Object
                         Rule : Constant
                          Code: /SAPDMC/LTXTH-OBJECT = 'MVKE'.
NAME               Name
                         Source: ZLONG_TEXT-MATNR (MATNR)
                         Rule : Transfer (MOVE)
                         Code: /SAPDMC/LTXTH-NAME = ZLONG_TEXT-MATNR.
ID                     Text ID
                         Rule : Constant
                         Code: /SAPDMC/LTXTH-ID = '0001'.
SPRAS             Language Key
                         Rule : Constant
                        Code: /SAPDMC/LTXTH-SPRAS = 'E'.
/SAPDMC/LTXTL Long Texts: Row
Fields
TEXTFORMAT Tag column
                         Rule : Constant
                         Code: /SAPDMC/LTXTL-TEXTFORMAT = '/'.
TEXTLINE          Text Line
                         Source: ZLONG_TEXT-LTEXT (LTEXT)
                         Rule : Transfer (MOVE)
                         Code: /SAPDMC/LTXTL-TEXTLINE = ZLONG_TEXT-LTEXT.
Step6 -> Specify file Legacy
Data On the PC (Frontend)
             Data D:\Sales_Longtext.txt
Step7 -> Assign File ZLONG_TEXT
Source structure for long text
          Data D:\Sales_Longtext.txt
Step8 -> Read data
Output result
Source Structure            Read                Written                Not Written
ZLONG_TEXT                  1                       1                            0
Transactions Read          1
Records Read:                1
Transactions Written:      1
Records Written:             1
Step 8 -> Display read data
Field Name             Field Text                      Field Value
MATNR                    MATNR                         MATERIA1
LTEXT                     LTEXT                            SALES TEXT FOR Material MATERIAL1
Step 9 -> Convert data
File Read: ZNRD_PRJ1_ZNRD_SUBPRJ2_ZNRD_LTEXT.lsmw.read
File Written: ZNRD_PRJ1_ZNRD_SUBPRJ2_ZNRD_LTEXT.lsmw.conv
Transactions Read:    1
Records Read:           1
Transactions Written: 1
Records Written:         2
tep 10 -> Display converted data
1 /SAPDMC/LTXTH     1    MVKE        MATERIAL1 0001   E
2 /SAPDMC/LTXTL     2/   SALES TEXT FOR Material       MATERIAL1
Step 11 -> Start direct input program
Output result for the same
Legacy System Migration Workbench Project:
ZNRD_PRJ1 ORH
Subproject:   ZNRD_SUBPRJ2     Upload long text
Object:          ZNRD_LTEXT          Long text tru direct input
File :              ZNRD_PRJ1_ZNRD_SUBPRJ2_ZNRD_LTEXT.lsmw.conv
Long Texts in Total:                                1
Successfully Transferred Long Texts: 1
Non-Transferred Long Texts:                0
Now when i check the material master sales view -> sales text it is empty. Please help me with the same.
Regards,
Ranjith N

Error while uploading Long Text in IA05 through BDC.

Dear Team,
Good Day.
While we are trying to upload the Long Text through BDC for IA05 operations the text is updating in Database but it is not visible in the long Text field. Is it possible to upload the long text through BDC or any bapi's which can be used for the same. Any configuration needed for this please do the needful.
Regards,
Bhanu.

Bhanu,
I've modified the previous message with a correction that, I had used this for uploading Activity lines Longtexts.
One more thing: After I faced some problem, I used split text in the code. i.e., Splitting the longtext into several lines (72 char each). Show these code lines to your ABAPer, may be he might be able to draw some clues.
In the BDC lines alongwith other fields the gold line below
PERFORM FILL_BDC_DATA       USING ' ' ' ' ' ' 'BDC_OKCODE' '=MX07'.
PERFORM FILL_BDC_DATA       USING ' ' ' ' ' '   'BDC_CURSOR' 'QMICON-LTAKTION(07)'.
PERFORM FILL_BDC_DATA       USING ' ' ' ' ' '   'VIQMMA-MATXT(07)' FS_FIELD-MNTXT7.
PERFORM SPLIT_LONGTEXT USING COL_COUNT.
Code for Form SPLIT_LONGTEXT is attached herewith (MATXT1 to MATXT7 are longtext split into 7lines )
Best of luck
KJogeswaraRao

Error While uploading Long Text for Operations in IA05 Transaction.

Dear Team,
Good Day.
While we are trying to upload the Long Text through BDC for IA05 operations the text is updating in Database but it is not visible in the long Text field. Is it possible to upload the long text through BDC or any bapi's which can be used for the same. Any configuration needed for this please do the needful.
Regards,
Bhanu.

Hi Bhanu
correct me if im wrong, the long text is a multiline text, its an object for text, this cant be filled with BDC since this object can not be created in background mode, so i think the bdc skip the routines to fill this object, you can use the save_text function right after the transaction ends
Regards
MC

How to add the long text in Production order through FM

Hi,
Iam having custom program which has BAPI (BAPI_PRODORD_CREATE) inside it and this program is used to create Production orders with the details of Sales order Number,Line item,Plant,Order type,Quantity and Start date. This program is scheduled in Background.
Now client wants to add the Long text (seperate TAB in production order and they want to update the VC details of Sales order in the Long text area).
One option is after creation of Production order, through BDC(calling CO02 and update the long text) we can update the long text and client doesn't want this option.
Another option is after creation of Production order, using Function module SAVE_TEXT, Update the Long text in Production Order and this is not working in Production order (already my ABAP consultant checked it ).
If any one of you came across this requirement, pl share with me how you addressed it.
Regards
A.Sureshbabu

Hi,
The method is quite simple, i presume you're quite well versed with doing recording, so the key thing to keep in mind is how to prepare the input file.
At my end i had about 5 lines of data which needed to be uploaded, hence i had a tab-delimited file with the order nos. in the first column & the five lines of text in five different columns (Refer format below)
Order No.
Line - 1
Line - 2
Line - 3
Line - 4
Line - 5
12345
txt - 1
txt - 2
txt - 3
txt - 4
txt - 5
67890
txt - a
txt - b
txt - c
txt - d
txt - e
Now provide this input file for your lsmw or bdc program & it will work. You can work with your abaper if you're not so comfortable with LSMW or BDC programming he / she should be able to easily make it work for you.
Regards,
Vivek

Upload long text from excel file into internal table

I need to upload service master(T-code : AC02) data alongwith long text.Now i have data in excel as: Service no(ASMD-ASNUM) and corresponding long text for it.
I am facing problem in getting entire lontext from excel into my internal table.It only takes till 255 characters i think.Any help in this regard woulg be highly appreciable.

hi,
what is the maximum length of your long text.
and you can try with more than 255 chars. in the internal table it will take , if you want check it.
i'm in 4.7 ,5.0 version, what about you ..
please check , you can upload even more than 255.
try
regards
vijay

How to upload long text using BAPI_SERVICE_CREATE

Hi,
I'm uploading service master records (transaction AC03) through my program using function BAPI_SERVICE_CREATE. As per the requirements, for each service number, I've to pass long text also (refer to the last text area on the transaction screen).
In the tables section of the bapi BAPI_SERVICE_CREATE, there is a provision for an internal table on the form SERVICE_LONG_TEXTS. But it is of no use as even if I pass data to it, it is not written to the database.
Can anyone tell me solution for my problem?
Thanks.
Anuj.

Anuj,
Create a new program using the following code and run it using an existing service number to see if the longtext gets updated. I ran it in my system and it is working fine. If it works for you, then you can modify your code accordingly.
report zlongtext.
data: header like thead,
      ilines like tline occurs 0 with header line.
parameters: asnum like asmd-asnum.
start-of-selection.
header-tdobject = 'ASMD'.
header-tdname = asnum.            " Make sure it has leading zeroes.
header-tdid = 'LTXT'.
header-tdspras = sy-langu.
ilines-tdformat = '*'.
ilines-tdline = 'Just a test to see how it works'.
append ilines.
clear ilines.
call function 'SAVE_TEXT'
    exporting
      header                = header
   INSERT                = ' '
      savemode_direct       = 'X'
    tables
      lines                 = ilines
   exceptions
     id                    = 1
     language              = 2
     name                  = 3
     object                = 4
     others                = 5.
if sy-subrc <> 0.
    message id sy-msgid type sy-msgty number sy-msgno
            with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
else.
    call function 'COMMIT_TEXT'.
    if sy-subrc = 0.
      write: / 'updated successfully'.
    endif.
endif.

How to UPLOAD Long Text in QS21

Dear All,
I have written BDC to upload Master Inspection Characterstics,
The Problem is I need to upload the long Text, (which is of some 250 chars).
How to do this.
Help is appriciated.
Thanks in advance
Arun

Hi,
I think there is an ICON to enter the long text.
U can start filling the LONG text here using
RSTXT-TXLINE(03) - this takes around 70 chars the next
chars in RSTXT-TXLINE(04) and so on. U can get this
in SHDB recording.
Regards,
GSR.

How to upload long text in CA02 Transaction

Hi,
I am getting a file with the following format.
Input File Record Layout:
Group#                  like PLKO-PLNNR,
Group Counter             like PLKO-PLNAL,
Operation#          like PLPO-VORNR,
Work Center#          like PLPOD-ARBPL,
Control Key          like PLPO-STEUS,
Short-text          like PLPO-LTXA1,
Long-text          type c(1000).
i have to upload the long text in the CA02 transaction. Could you please let me know the procedure that i should follow in uploading this in doing a call transaction in BDC.
Thanks in Advance,
Suresh

Take a look at FM SAVE_TEXT
To get the parameters of the FM :
Goto the long text in CA02 and then via the menu :
Goto --> Header .
A popup is displayed containing the input parameters :
Text Name
Language
Text ID
Text object.
Hope it helps,
Erwan.
Message was edited by: Erwan LE BRUN

How to download and upload long text for project, WBS , Network,

Hi all,
I have two isssues.
1) I am extracting Projects, WBS , Network , Network activity and network activity element from a SAP 4.7 system using bapi's
BAPI_PROJECTDEF_GETDETAIL
BAPI_PROJECT_GETINFO
BAPI_NETWORK_GETINFO
BAPI_BUS2054_GETDATA
I am able to get all the details except long text. I want to know how do i extract the long text other than getting it manually by using select_text and Read_text Function module, is there any bapi to achieve this.
The reason why i am not using Function modules Read_text and Write_text is, object name( TDNAME ) value stored in STXH table for project, wbs and network are the project, wbs and network itself so i dont have any issues with this but the TDname value for activity and activity element are completely different ( Routing number and counter is stored respectively ) which i am not getting as the part of the bapi(BAPI_NETWORK_GETINFO) output.
2) I have to upload the extracted Project and it sub object data to ECC 6.0 system , i am able to achieve this by using BAPI's BAPI_PROJECTDET_CREATE, BAPI_PROJECT_MAINTAIN and BAPI_NETWORK_MAINTAIN. I am not able to load the longtext for the same, is there any way to load the long text .
All help will be greatly appreciated and rewarded.
Thanks & Regards,
Rajanidhi Rajasekeran.

I don't think there is any BAPI to do it.
We are doing it by read_text & edit_text . required fields for text name can be fetched by following select
if not e_activity[] is initial.
    select aaufnr aaufpl baplzl bobjnr b~vornr
      into corresponding fields of table t_longtext
      from afko
        as a
    left join afvc
        as b
        on aaufpl = baufpl
       for all entries in e_activity
       where a~aufnr = e_activity-network
       and a~aufnr is not null.
endif.
      txtname = wa_longtext-objnr.
      replace c_nv in txtname with sy-mandt.

AC02 - Problem in uploading Long text data

Hi All,
I record a BDC for AC02 tcode and i am able to upload all the data in AC02 tcode except long text. How can I upload this, kindly suggest.
Thanks and Regards,
Rajesh Vasudeva

Hi,
Check the below threads.It could be helpful to you.
LONGTEXT: MATERIAL - PRUE
problem with long text
Cheers,
Hakim

Uploading long text thru bdc

Hi Gurus,
I am facing some problem during the recording of hader text.. Details given below...
I need to do this by using BDC...
 VA01 Steps as follows:
1. Open VA01
o Enter G2 or L2 order Type
o Enter 9991 for Sales Org
o Enter 01 for Dist Channel
o Enter 99 for Division
2. Enter Customer SAP # from spreadsheet to ship to and sold to
(Enter some appropriate number)
3. Enter Material Code from spreadsheet to Material
(Enter some appropriate number)
4. Enter target quantity as 1
5. Enter Billing date as system date
6. Go to Sales Tab
7. Select Blank for billing block
8. Enter order reason 013 for G2 type or 012 for L2
9. Goto Header, Texts, Choose Invoice header text
10. Enter SVB# from file as well as Quarter Text from file in notes
11. Save
this is want i need to do in order to create invoice serivce request by using BDC.
I can able to get the fields till 8 th point ( i can able to write the program ), but from the 9 th point i m facing the problem..
Bcz it just i need to enter some text here..( may be it's bcz of click )
This is could not able to do it , can you please help me how can i do this ?
Please let me know if i m not clear with my explanation...
Looking forward for your response...

Hi,
Please refer this link:
http://help.sap.com/erp2005_ehp_03/helpdata/EN/4e/09d47b8389d4439fa70159920f4bbe/frameset.htm.
Regards,
Rahul

Re:Uploading Long text of 500 characters through LSMW

Similar Messages

Maybe you are looking for