RE; when a sales order is posted error in Md04

When a sales order posted for 10 nos, the order shown in stock requirement list it is exhibiting the order for 120.Basically it is the integration problem despite that sd people claim it is the setting problem of pp or mm consultant. Can anybody clear my problem.
Edited by: Vachanala Rajasekhar on Dec 27, 2007 3:28 AM

If possible; kindly change the order qty to either 9 or 11 and then check the order qty proposed by the system.
Is this appearing for any particular material or a common error??
If for any particular material, u need to check the material master but first do some change in order qty and then see the behaviour
Please revert with your findings
Rgds

Similar Messages

Getting error when creat sales order and Stock Posting

Hi
I have created enterprise structure, xd01, mm01, ovkk but I count't post stock.
When create sales order getting error is that
1.This material is not defined for sales area 1000, 10, 00.
And if i use this T.Code MB1C,
2. Parameters for plant 1000 not maintained in Inventory Mgt.,
*3. Unit *** is not created in language EN.*
Thanks in advance

Dear selvi sankaran
1) Compare the sales organization, distribution channel and division of customer and material. In your case, either of that should have been created differently. Maintain the same sales area and retry
2) Go to omi8 and maintain the required parameters to your plant
3) Go to Material Master, select "Additional data" and click on "Descriptions". There maintain "EN" under language.
thanks
G. Lakshmipathi

Error message when updating Sales Orders

Hi Experts
Following an issue over the weekend when I was forced to perform a hard reset we are now experiencing error message when trying to update some sales orders.
This entry already exists in the following tables " ADO1 (ODBC - 2035) [Message 131 - 183]
it is not happening on all orders - i think only ones which were on the system prior to the reset.
We also use webtools and the B1SyncService seems to be causing the SAP B1 system to become unusable - following each attempt to sync there is an error in the event log:
Event Type:     Error
Event Source:     B1SynchService
Event Category:     None
Event ID:     0
Date:          29/06/2009
Time:          13:42:38
User:          N/A
Computer:     SQL01
Description:
A connection was successfully established with the server, but then an error occurred during the login process. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.)
   at netpoint.api.data.DataFunctions.ExecuteScalar(String SQL, String connectionstring)
   at NetPoint.SynchSBO.SBOObjects.SBOUtility.SetCompany(Company TheCompany, SecurityTicket securityTicket)
   at NetPoint.SynchSBO.Synch.SetCompany()
   at NetPoint.SynchSBO.Synch..ctor(SecurityTicket ticket)
   at NetPoint.SynchSBO.Synch..ctor(SecurityTicket ticket, Int32 pricinginterval)
   at NetPoint.SynchService.NPSynchService.Synch(String profile, Mutex mutex)
   at NetPoint.SynchService.NPSynchService.Main(String[] args)
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
For now I have had to stop the SyncService to prevent B1 from becoming unusable (users are unable to start any AR module), but even after I have stopped the syncservice I still have the error when updating sales orders.
Regards
Jon

Dear Johnny,
the error reported sounds like a DB Corruption. I would advise you to log a message to SAP Support including all the details in order to obtain the error message. It is also a good idea and it will speed up the process if you include some print screens showing exactly the error message.
Hope my reply helps you to solve the issue.
Regards,
Wesley Honorato

Miss value FI Posting on Sales Order Transfer Posting movement Type 413 E

Dear Expertise
               I've a problem about sales order transfer posting. My both of Sales order (Source & Destination) are make to order and open with configurable material(KMAT). Both of sales order contain only one item on the same material no.
Assume scenario material vastr
Assume that material vastr is configurable material wait for sales order to fill characteristic and it was maintained standard price value = 1100
                Sales order A has plan cost on material VASTR 1000
                Sales order B has plan cost material VASTR 980
When we make a sales order transfer posting(Transfer from Sales Order A-> B) by transaction MIGO_TR by use movement type 413 E. It can post a transfer complete. But my problem is when I trace to FI-Document
                It was post like this
                Dr. Standard price                         1100
                Cr. price for Sales order A(src.) 1000
                Cr. Cost Variance                          +100
I don't want it to offset with standarad price value. I want it to do like this
                Dr. price for Sales order B(Des.)   980
                Cr. price for Sales order A(src.) 1000
                Dr. Cost Variance                           +20
How can I configure it?   I trial to clear standard price by MR21, System can do it . But I don't want to clear it because it impact to other. I want to know. How can I configure system to take both of plan cost of sales order to offset each other please.
Edited by: Gareth John on Aug 16, 2010 2:23 PM
Edited by: Gareth John on Aug 16, 2010 2:42 PM
Edited by: Gareth John on Aug 16, 2010 2:42 PM

Hi,
411- E- sales order to own stock
412-E- Reversal of 411 E
& 413-E-Sales order to sales order.
Regards,
Piyush

BOM not exploding in Sales order & Net Value error

Hello Dear all,
I have created a product "A" with BOM items 10, 20 & 30.
Item cat. Gr for "A" is ERLA & for 10, 20 & 30 is LUMF.
I have also created BOM with these 3 matls. (ie 10, 20 & 30).
When processing Sales Order Item cat. appeared in SO for "A" is TAP & for other 3 is TAN. "A" shows the price maintained for it, but not showing Net Value at Header level data in SO.
Also document is incomplete because of Net value for Items 10, 20 & 30.
I don?t want price of 10, 20 & 30 should display in SO at Item level
Can anyone suggest the required setting?
Thanks
Shan

hi,
For BOM mainly two material groups are used.
LUMF and ERLA.
If you used ERLA in the main material which consists of different materials then the pricing would be carried out only for the main item, while the other sub items pricing would not be displayed.
while if you use LUMF then the main material would not be priced but only the sub items would be relevant for pricing the the total of all the sub items forms the basis of the sales order net value.
regarding the net value error you can just check the pricing configuration for the steps and sub total.
regards,
Siddharth.
Edited by: SD on Mar 11, 2008 7:51 AM

Deactivate the automatic Creation of Delivery after Sales Order is Posted

SD gurus,
When I am creating a Sales Order, after posting it I want to create the delivery for the same manually.
But the configuraion is so made that the delivery is automatically generated.
How do i go for it ?
Kindly help

Hi Mohanty,
I think the Immediate Delivery under Shipping for that order type may have value A or X, Clear that value.
1) Goto VOV8 tansaction.
2) Select the Sales order type (For eg: OR for standard order) and double click on that
3) Under Shipping tab, Set Immediate Delivery with Blank value
Plz reward points if it is helpful
Thanks,
Vinay

Credit exposure updating even when the sales order is blocked

Hi,
We are using FSCM credit management. We observed that the credit exposure is updated even when the sales order is blocked. When we investigated it is found out that SD has removed the requirement 101 in the subsequent functions. The reason is they want the confirmed quantity to be updated even though the order is blocked. This will allow the Material Planning to go ahead and purchase the goods. Is there a way around it where we can have MM see the confirmed quantity in the order and it will not updated the credit exposure?
Thanks and Regards
Madhu Vutukuri

Hi Sravan,
Please let us know, whether the document is really getting reflected in the blocked documents list for a particular kind of block and you are releasing that particular block in the specified area as we have different areas for releasing blocks. Chances are that in the mean time, the concerned block might have been removed in the system and not updated as it might have been. It will be of great help, if you can provide us with the screenshots of the process followed.
Regards,
Aman

Does MV45AFZZ user exit trigger when CRM sales order is replicated into ECC

Hi All,
When a Sales order is created in CRM, it is replicated automatically using BDOCS from CRM into ECC.
I have requirement to code the logic during the process, when sales order is replicated into ECC.
So I need to know the BAPI which is actually triggered to create sales order in ECC, while replication takes place.
If I could atleast know, if USEREXITS in MV45AFZZ would trigger or not, when CRM order is replicated into ECC, then I could determine, If I could code my logic in those user exits.
Please help me on this.

please check this link
keremgomi=wordpress=com
Rgds
Raj

Modifying NAST when a sales order is stored.

Hello,
How can I modify output messages (suffix2 field) when a sales order is saved (va01 or va02)? I have added a breakpoint at some sales user-exit but the xnast and ynast are always empty (and sales orders contains output messages).
Thanks in advance,
Ricard.

Oscar,
You may be better off logging this in the ABAP forum. I'm sure there would be plenty of code-cutters willing to offer you advice on this. I know there are a heap of function modules around spool requests and the NAST/NACH tables. There might be something in there.

Creating a PO when a sales order is created

Hi,
Can anyone guide how this requirement can be achieved. For both scenarios there should be no manual intervention.
This is not a third party scenario.
When a sales order is created then a purchase order should be created in same server and
in different server.
1) For different server scenario i think idoc can be used. what should be my outbound and inbound message types and idoc types. because both po and so have same idoc types(ORDERS) and message types(ORDERS05). so when a sales order is created in 1 system how system knows that it needs to convert to PO in other system. And there should be no Purchase Requisition created..
2) Best way creating PO in same server with sales order with out creating Purchase Requisition.
please share your valuable suggestions.
Edited by: abilash n on Jun 13, 2011 7:12 AM

you need two output types for two scenarios, and there are different ways to do it from there,
for PO creation in same server I would use a Output with Transmission Medium as 8 - special function and used BAPI to create the PO, this way you dont have to keep track of idocs but the once the order is created functin will get triggerd and PO will be generated.
Check with the SD Consultant on how to create the Output type with TM 8(tcode NACE -> V1 - sales -> output types -> ).
for the different server I believe you alredy have the RFC/ connecetions set up. You'll have to use an IDOC for this.
Partner profiles and process codes in destination systems will determine the PO creation.
regards,
nipuna

User Exit/Badi to change the billing plan date when create sale order

Experts,
Please advise which user exit/badi can be used to change the billing plan date wen create sale order.
My requriement is based on some rules to dynamically change the line item billing plan start date and end date when create sales order.
I tried some user eixt in MV45AFZZ, but the date got revert to the orginal date from billing plan.

Hi,
check the include MV45AFZB.
Thanks & Regards,
Sateesh.

Multiple events created in R3 when creating sales order

Hi all,
We are having a problem when creating and changing a sales order in CRM.
When a sales order is created and rapidly changed (or changed more than one time) from CRM, backend is receiving 2 events (from BO BUS2032, CREATED and CHANGED) but at the same time (not even a second of difference between them).
So the WF that is linked to that event is triggered twice (we are checking if another WF instance is running, but as this 2 events are generated at the same time, the WF instances didn't notice the other instance).
Do you know if there is a way to solve this problem?
Thanks!

Hello
In everyworkflow there is a tab where you define if you want certain event to be triggered. I think it would be enough to de activate this triggering event.
Go to transaction PFTC, enter your workflow ID and choose tab "triggering events". You should have a green light for both BUS2032 -CREATED and CHANGED. Click on the event you want to de activate.
Regards
Joaquin

Mass sales order costing(ck55) error

hi
If i do individual sales order costing , no error.But same sales order has done in ck55,error"item is not relevant for billing" ,but in single sales order costing is ok, .what is reason.
system message
Item is not relevant for billing
    Message no. CK_MCSO029
Note
    You can remove this message from the log with the customizing
    transaction User-Defined Error Management for Mass Costing of Sales
    Documents. The item will still not be costed, however.
Diagnosis
System Response
reg
nagesh
Edited by: nageshrr on Jul 5, 2011 2:01 PM
Edited by: nageshrr on Jul 5, 2011 2:04 PM

no replies and my thread was dead.

Partner Function "Vendor" missing when the sales order is replicated to ECC

Hi Gurus,
We are facing a problem on replication of functions partners between
sales order of CRM and ECC.
We have downloaded vendors (partners of table LFA1) from ECC to CRM
following note 883162 and this replication was ok!
We have mapped all partner functions from ECC to CRM and from CRM to
ECC for distribution of partners between systems.
We must include a vendor using partner function '0000092 - Carrier' on
our sales order, which is transferred to ECC. However, when the sales
order is transfered to ECC, the vendor (which was included on CRM) is
missing.
When the sales order is created on ECC and the partner (type carrier)
is included in, the order arrives on CRM missing only the partner
number, because the partner function is there.
How to fix this problem?
Best Regards,
Nivea Faria

Hi,
See this Note : 975195
Hope this helps.
Best Regards
Shiven

Does MV45AFZZ trigger when CRM sales order is replicated into ECC

Hi All,
When a Sales order is created in CRM, it is replicated automatically using BDOCS from CRM into ECC.
I have requirement to code the logic during the process, when sales order is replicated into ECC.
So I need to know the BAPI which is actually triggered to create sales order in ECC, while replication takes place.
If I could atleast know, if USEREXITS in MV45AFZZ would trigger or not, when CRM order is replicated into ECC, then I could determine, If I could code my logic in those user exits.
Please help me on this.

Hi,
I guess it should. Just put external break point (RFC userid with debuger rights) and see.
Thanks,
Nilesh P.

RE; when a sales order is posted error in Md04

Similar Messages

Maybe you are looking for