Read data from E$ table and insert into staging table

Hi all,
I am a new to ODI. I want your help in understanding how to read data from an "E$" table and insert into a staging table.
Scenario:
Two columns in a flat file, employee id and employee name, needs to be loaded into a datastore EMP+. A check constraint is added to allow data with employee names in upper case only to be loaded into the datastore. Check control is set to flow and static. Right click on the datastore, select control and then check. The rows that have violated the check constraint are kept in E$_EMP+ table.
Problem:
Issue is that I want to read the data from the E$_EMP+ table and transform the employee name into uppercase and move the corrected data from E$_EMP+ into EMP+. Please advise me on how to automatically handle "soft" exceptions in ODI.
Thank you

Hi Himanshu,
I have tried the approach you suggested already. That works. However, the scenario I described was very basic. Based on the error logged into the E$_EMP table, I will have to design the interface to apply more business logic before the data is actually merged into the target table.
Before the business logic is applied, I need to read each row from the E$EMP table first and I do not know how to read from E$EMP table.

Similar Messages

HOW TO READ DATA FROM A FILE AND INSERT INTO A TABLE USING UTL_FILE

Hi..
I have a file.I want to read the data from file and load it into a table using utl_file.
how can I do it?
Any reply apreciated...

Hi,
This is not your requirment but u can try this :
CREATE OR REPLACE DIRECTORY text_file AS 'D:\TEXT_FILE\';
GRANT READ ON DIRECTORY text_file TO fah;
GRANT WRITE ON DIRECTORY text_file TO fah;
DROP TABLE load_a;
CREATE TABLE load_a
(a1 varchar2(20),
a2 varchar2(200))
ORGANIZATION EXTERNAL
(TYPE ORACLE_LOADER
DEFAULT DIRECTORY text_file
ACCESS PARAMETERS
(FIELDS TERMINATED BY ','
LOCATION ('data.txt')
select * from load_a;
CREATE TABLE A AS select * from load_a;
SELECT * FROM A
Regards
Faheem Latif

How to read the data from XML file and insert into oracle DB

Hi All,
I have below require ment.
I will receive data in the XML file. then i need to read that data and insert into oracle tables. please let me know how this can be handled.
Many Thanks.

Sounds a lot like this question, only with less details.
how to read data from XML variable and insert into table variable
We can only help if you provide us details to help as we cannot see what you are doing and only know what you tell us. Plenty of examples abound on the forums that cover the topics you seek as well.

Hi, extract data from xml file and insert into another exiting xml file

i am searching code to extract data from xml file and insert into another exiting xml file by a java program. I understood it is easy to extract data from a xml file, and how ever without creating another xml file. We want to insert the extracted data into another exiting xml file. Suggestions?
1st xml file which has two lines(text1.xml)
<?xml version="1.0" encoding="iso-8859-1"?>
<xs:PrintDataRequest xmlns:xs="http://com.unisys.com/Anid"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://com.unisys.com/Anid file:ANIDWS.xsd">
<xs:Person>
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://com.unisys.com/Anid file:ANIDWS.xsd">
These two lines has to be inserted in the existing another xml(text 2.xml) file(at line 3 and 4)
Regards,
bubbly

Jadz_Core wrote:
RandomAccessFile? If you know where you want to insert it.Are you sure about this? If using this, the receiving file would have to have bytes inserted that exactly match the number of bytes replaced. I'm thinking that you'll likely have to stream through the second XML with a SAX parser and copy information (or insert new information) as you stream with an XML writer of some sort.

Extract data from xml file and insert into another exiting xml fil

hello,
i am searching extract data from xml file and insert into another exiting xml file by a java program. I understood it is easy to extract data from a xml file, and how ever without creating another xml file. We want to insert the extracted data into another exiting xml file. Suggestions?
Regards,
Zhuozhi

If the files are small, you can load the target file in a DOM document, insert the data from the source file and persist the DOM.
If the files are large, you probably want to use a StAX or SAX.

Reading Data from Unix file and write into an Internal table

Dear all,
                 I am having an requirement of reading data from unix file and write the same into an internal table..how to do that ...experts please help me in this regard.

Hi,
do like this
PARAMETERS: p_unix LIKE rlgrap-filename OBLIGATORY.
DATA: v_buffer(2047) TYPE c.
DATA: BEGIN OF i_buffer OCCURS 0,
        line(2047) TYPE c,
END OF i_buffer.
* Open the unix file..
OPEN DATASET p_unix FOR INPUT IN TEXT MODE.
<b>IF sy-subrc NE 0.
*** Error Message "Unable to open file.
ELSE.</b>
   DO.
     CLEAR: v_buffer.
     READ DATASET p_unix INTO v_buffer.
     IF sy-subrc NE 0.
        EXIT.
     ENDIF.
     MOVE v_buffer TO i_buffer.
     APPEND i_buffer.
ENDDO.
ENDIF.
CLOSE DATASET p_unix.
<b>Reward points if it helps,</b>
Satish

Reading data From XML file and setting into ViewObject to Pouplate ADF UI

Hi,
I have following requirement.
I would like to read data from XML file and populate the data in ViewObject so that the data can be displayed in the ADF UI.
Also when user modifies the data in the ADF UI, it should be modified back into to ViewObject.
Here is an example - XML file contains Book Title and Author. I would like to read Book Title and Author from XML file and set it into ViewObject Attribute and then display Book title and Author in ADF UI page. Also when user modifies Book title and Author, I would like to store it back in View Object.
Please help me with this requirement and let me know if any solution exist in ADF, for populating the ADF UI screen fields with external XML file data.
Thanks

Read chapter 42 http://download.oracle.com/docs/cd/E16162_01/web.1112/e16182/bcadvvo.htm of the fusion developer guide
Section 42.7, "Reading and Writing XML"
Section 42.8, "Using Programmatic View Objects for Alternative Data Sources"
Timo

Pool data from text file and insert into database

Can anyone tell me how to pool data from a text file and insert into database?
let's say my text file is in this format
123456 Peter 22
234567 Nicholas 24
345678 Jane 20
Then I need to insert the all the value for this three column into a table which has the three column name ID, Name, Age
Anyone knows? I need to do this urgently...Thank in advanced

1. Use BufferedReader and read the file line by line.
2. Loop thru the file and do the following steps with in this loop.
3. Use StringTokenizer to seperate each line into three values (columns).
4. Now create a insert statement with these values and add the statement to the batch (using addBatch() method of PreparedStatement or Statement).
5. Finally (after exiting the loop), execute these batch of statements (using ps.executeBatch()).
Sudha

Getting data from some source and insert into corresponding source

hi all,
i am using db10g.
i have like like
MMA : add1:add2:add3'the above said is the format and actual data will be something like
MMA : bank street : no:32 : tel: +9127546663
add1 = bank street
add2 = no:32
add3 = tel: +9127546663 my requirement to store add1,add2 and add3 into the table.
So to take the data i am using substring and instring function to get the data with respect to : my problem is for example in add2 place no:32 is there my task is to fetch the no:32 from that line and store into the table as no:32 only in that case i cannot fetch the value in terms of :.
sincr : is the delimiter(seperator for data element)
how can i solve this issue?
Thanks..
Edited by: user13329002 on Jan 1, 2011 11:37 PM

Your first addr1 is terminated by (:).
your second addr2 is started with (no:), and also terminated by (:)
and third addr3 is started with (tel:).
only the first and third (:) will be used as delimiter, so how about this?
WITH T AS (SELECT 'bank street:no:32:tel:+9127546663' AS STR FROM DUAL)
SELECT SUBSTR(STR, 1, INSTR(STR, ':', 1, 1)-1) AS ADD1,
SUBSTR(STR, INSTR(STR, ':', 1, 1)+1, INSTR(STR, ':', 1, 3)-INSTR(STR, ':', 1, 1)-1) AS ADD2,
substr(str, instr(str, ':', -1, 2)+1) as add3 from t;
bank street no:32 tel:+9127546663Or can`t you just ask the people who gave the requirement to change the delimiter used in the format to something else like pipe (|)?

How to get the data from a file and insert into a table

Good morning,
NEED TO READ THIS FILE sui_facturacion_alcantarillado_15085_2011_01_76845_00A.csv containing the following information
NUID,NUMERO_DE_CUENTA_CONTRATO,CÓDIGO_DANE_DEPARTAMENTO,CÓDIGO_DANE_MUNICIPIO,ZONA_IGAC,SECTOR_IGAC,MANZANA_O_VEREDA_IGAC,NÚMERO_DEL_PREDIO_IGAC,CONDICION_DE_PROPIEDAD_DEL_PREDIO_IGAC,DIRECCIÓN_DEL_PREDIO,NÚMERO_DE_FACTURA,FECHA_DE_EXPEDICIÓN_DE_LA_FACTURA,FECHA_DE_INICIO_DEL_PERÍODO_DE_FACTURACIÓN,DIAS_FACTURADOS,CÓDIGO_CLASE_DE_USO,UNIDADES_MULTIUSUARIO_RESIDENCIAL,UNIDADES_MULTIUSUARIO_NO_RESIDENCIAL,HOGAR_COMUNITARIO_O_SUSTITUTO,USUARIO_FACTURADO_CON_AFORO,USUARIO_CUENTA_CON_CARACTERIZACIÓN,CARGO_FIJO,CARGO_POR_VERTIMIENTO_BASICO,CARGO_POR_VERTIMIENTO_COMPLEMENTARIO,CARGO_POR_VERTIMIENTOSUNTUARIO,CMT,VERTIMIENTO_DEL_PERIOD_EN_METROS_CUBICOS,VALOR_FACTURADO_POR_VERTIDO,VALOR_DEL_SUBSIDIO,VALOR_DE_LA_CONTRIBUCIÓN,FACTOR_DE_SUBSIDIO_O_CONTRIBUCIÓN_CARGO_FIJO,FACTOR_DE_SUBSIDIO_O_CONTRIBUCIÓN_VERTIMIENTO,CARGOS_POR_CONEXIÓN,PAGO_ANTICIPADO_DEL_SERVICIO,DÍAS_DE_MORA,VALOR_DE_MORA,INTERESES_POR_MORA,OTROS_COBROS,CAUSAL_DE_REFACTURACIÓN,NUMERO_DE_LA_FACTURA_OBJETO_DE_REFACTURACIÓN,VALOR_TOTAL_FACTURADO,PAGOS_DEL_CLIENTE_DURANTE_EL_PERÍODO_FACTURADO
242602,242602,76,845,99,99,9999,9999,999,CLL 5 CRA 7 PEATONAL,24911920,12-01-2011,01-12-2010,30,01,,,0,0,0,1,0000000000.00,0000000000.00,0000000000.00,0000000000.00,0000000005,0000002200.00,0000000000,0000000000,0.000,0.000,0000000000.00,0000000000.00,0,0000000000.00,0000000000.00,0000000000.00,0,0,0000002201.00,0000000000.00
242604,242604,76,845,99,99,9999,9999,999,CRA 4 # 6 - 13,24911846,12-01-2011,01-12-2010,30,01,,,0,0,0,1,0000000000.00,0000000000.00,0000000000.00,0000000000.00,0000000013,0000002200.00,0000000000,0000000000,0.000,0.000,0000000000.00,0000000000.00,0,0000000000.00,0000000000.00,0000000000.00,0,0,0000002201.00,0000004411.00
242605,242605,76,845,99,99,9999,9999,999,CRA 2 CLLES 3 Y 4,24911509,12-01-2011,01-12-2010,30,01,,,0,0,0,1,0000000000.00,0000000000.00,0000000000.00,0000000000.00,0000000004,0000002200.00,0000000000,0000000000,0.000,0.000,0000000000.00,0000000000.00,0,0000000000.00,0000000000.00,0000000000.00,0,0,0000002201.00,0000002200.00
this is the function that I have
<<function_test>>
DECLARE
TOTAL_CAR NUMBER;
POS_1 NUMBER:= 0;
POS_2 NUMBER:= 0;
REST NUMBER:= 0;
ACUM NUMBER:= 0;
CADEN VARCHAR2(200);
nom_archivo varchar2(80);
v1 utl_file.file_type;
v2 varchar2(2048);
BEGIN
     nom_archivo := 'sui_facturacion_alcantarillado_15085_2011_01_76845_00A.csv';
     v1:= utl_file.fopen('PUBLIC_ACCESS',nom_archivo,'R',32767);
     utl_file.get_line(v1,v2);
     SELECT LENGTH(v2) INTO TOTAL_CAR FROM DUAL;
     ACUM:=1;
     POS_1:=0;
     WHILE ACUM <= 60
     LOOP
          select instr(v2, ',', 1, ACUM) PRUEBA
          INTO      POS_2
          FROM      DUAL;
          dbms_output.put_line(' TOTAL POSICION 1--> '|| POS_1);
          dbms_output.put_line(' TOTAL POSICION 2--> '|| POS_2);
          dbms_output.put_line(' TOTAL ACUMULADO --> '|| ACUM);
          REST := (POS_2-POS_1)-1;
          SELECT SUBSTR(v2,(POS_1+1),REST) PRUEBA2
               INTO CADEN
          FROM      DUAL;
          dbms_output.put_line(' CADENA SELECCIONADA --> '|| CADEN);
          ACUM := ACUM + 1;
          POS_1:= POS_2;
     END LOOP;
     utl_file.fclose(v1);
     dbms_output.put_line(' -->');
     dbms_output.put_line(' TOTAL POSICION 1-->'|| POS_1);
     dbms_output.put_line(' TOTAL POSICION 2-->'|| POS_2);
     dbms_output.put_line(' TOTAL ACUMULADO -->'|| ACUM);
     dbms_output.put_line(' TOTAL DE CARACTERES -->'|| TOTAL_CAR);
     dbms_output.put_line(' ');
     EXCEPTION
          WHEN NO_DATA_FOUND THEN
               dbms_output.put_line('NO SE ENCONTRARON MAS CARACTERES');
          WHEN OTHERS THEN
               dbms_output.put_line('OTRO TIPO DE ERROR ');
               dbms_output.put_line('CODIGO ERROR '|| SQLCODE ||' '||SQLERRM);
END;
Which must be separated by a comma and enter a table I have the following procedure in which only brings me the first line, which need not
The current role I have just read and extract data from the row number 1, I do not need information.
I need information for rows 2,3,4. In each row there are 41 fields, which I enter in a table called Dato_archivos.
how to perform this function? ...
I appreciate the cooperation and explanation ...
GOOD DAY ...
REYNEL SALAZAR MARTINEZ
COLOMBIA ...

When you get an error with external tables (or sql*loader) look in the same folder as the data file and you should get a .log file and maybe a .bad file too.
The log file should indicate the nature of the error it has trying to load the data.
I've just copied your sample data from your first post to a file on my server and tried it to find that you are not specifying the required format for your dates. The below shows it now working...
CREATE TABLE tabla_prueba
(NUID NUMBER,
   NUM_CUENTA_CONTRATO NUMBER,
   COD_DANE_DD NUMBER,
   COD_DANE_MM NUMBER,
   ZONA_IGAC NUMBER,
   SECTOR_IGAC NUMBER,
   MANZANA_VEREDA_IGAC NUMBER,
   NUM_PREDIO_IGAC NUMBER,
   CONDICION_PREDIO_IGAC NUMBER,
   DIRECCION_PREDIO_IGAC VARCHAR2(80),
   NUM_FACTURA NUMBER,
   FECHA_EXPED_FACTURA DATE,
   FECHA_INI_PERIODO_FACTURACION DATE,
   DIAS_FACTURADOS NUMBER,
   COD_CLASE_USO NUMBER,
   UNI_MULTIUSUARIO_RESIDENCIAL NUMBER,
   UNI_MULTIUSUARIO_NORESIDENCIAL NUMBER,
   HOGAR_COMUNITARIO NUMBER,
   USUARIO_FACTURADO_AFORO NUMBER,
   USUARIO_CON_CARACTERIZACION NUMBER,
   CARGO_FIJO NUMBER,
   CARGO_VERTIMENTO_BAS NUMBER,
   CARGO_VERTIMENTO_COMP NUMBER,
   CARGO_VERTIMENTO_SUNT NUMBER,
   CMT NUMBER,
   VLR_FACTURADO_VERTIDO NUMBER,
   VLR_SUBSIDIO NUMBER,
   VLR_CONTRIBUCCION NUMBER,
   FACTOR_SUBS_CONTR_CARGO_FIJO NUMBER,
   FACTOR_SUBS_CONTR_VERTIMENTO NUMBER,
   CARGO_CONEXION NUMBER,
   PAGO_ANTICIPADO_SERVICIO NUMBER,
   DIAS_MORA NUMBER,
   VLR_MORA NUMBER,
   INTERES_MORA NUMBER,
   OTROS_COBROS NUMBER,
   CAUSAL_REFACTURACION NUMBER,
   NUM_FACTURA_OBJ_REFACTURACION NUMBER,
   VLR_TOTAL_FACTURADO NUMBER,
   PAGOS_CLIENTE_DURANTE_PERIODO NUMBER
ORGANIZATION EXTERNAL
(TYPE ORACLE_LOADER
   DEFAULT DIRECTORY TEST_DIR
   ACCESS PARAMETERS
    (RECORDS DELIMITED BY NEWLINE
     SKIP 1
     FIELDS TERMINATED BY ","
     OPTIONALLY ENCLOSED BY '"'
      (NUID,
       NUM_CUENTA_CONTRATO,
       COD_DANE_DD,
       COD_DANE_MM,
       ZONA_IGAC,
       SECTOR_IGAC,
       MANZANA_VEREDA_IGAC,
       NUM_PREDIO_IGAC,
       CONDICION_PREDIO_IGAC,
       DIRECCION_PREDIO_IGAC,
       NUM_FACTURA,
       FECHA_EXPED_FACTURA CHAR DATE_FORMAT DATE MASK "DD-MM-YYYY",
       FECHA_INI_PERIODO_FACTURACION CHAR DATE_FORMAT DATE MASK "DD-MM-YYYY",
       DIAS_FACTURADOS,
       COD_CLASE_USO,
       UNI_MULTIUSUARIO_RESIDENCIAL ,
       UNI_MULTIUSUARIO_NORESIDENCIAL,
       HOGAR_COMUNITARIO ,
       USUARIO_FACTURADO_AFORO ,
       USUARIO_CON_CARACTERIZACION ,
       CARGO_FIJO ,
       CARGO_VERTIMENTO_BAS ,
       CARGO_VERTIMENTO_COMP,
       CARGO_VERTIMENTO_SUNT,
       CMT,
       VLR_FACTURADO_VERTIDO,
       VLR_SUBSIDIO ,
       VLR_CONTRIBUCCION ,
       FACTOR_SUBS_CONTR_CARGO_FIJO ,
       FACTOR_SUBS_CONTR_VERTIMENTO ,
       CARGO_CONEXION ,
       PAGO_ANTICIPADO_SERVICIO ,
       DIAS_MORA ,
       VLR_MORA ,
       INTERES_MORA ,
       OTROS_COBROS ,
       CAUSAL_REFACTURACION ,
       NUM_FACTURA_OBJ_REFACTURACION,
       VLR_TOTAL_FACTURADO,
       PAGOS_CLIENTE_DURANTE_PERIODO
    LOCATION ('test.csv')
SQL> select * from tabla_prueba;
      NUID NUM_CUENTA_CONTRATO COD_DANE_DD COD_DANE_MM ZONA_IGAC SECTOR_IGAC MANZANA_VEREDA_IGAC NUM_PREDIO_IGAC CONDICION_PREDIO_IGAC DIRECCION_PREDIO_IGAC                                                    NUM_FACTURA FECHA_EXPE FECHA_INI_
DIAS_FACTURADOS COD_CLASE_USO UNI_MULTIUSUARIO_RESIDENCIAL UNI_MULTIUSUARIO_NORESIDENCIAL HOGAR_COMUNITARIO USUARIO_FACTURADO_AFORO USUARIO_CON_CARACTERIZACION CARGO_FIJO CARGO_VERTIMENTO_BAS CARGO_VERTIMENTO_COMP CARGO_VERTIMENTO_SUNT        CMT
VLR_FACTURADO_VERTIDO VLR_SUBSIDIO VLR_CONTRIBUCCION FACTOR_SUBS_CONTR_CARGO_FIJO FACTOR_SUBS_CONTR_VERTIMENTO CARGO_CONEXION PAGO_ANTICIPADO_SERVICIO DIAS_MORA   VLR_MORA INTERES_MORA OTROS_COBROS CAUSAL_REFACTURACION NUM_FACTURA_OBJ_REFACTURACION
VLR_TOTAL_FACTURADO PAGOS_CLIENTE_DURANTE_PERIODO
    242602              242602          76         845         99          99                9999         9999              999 CLL 5 CRA 7 PEATONAL                                                         24911920 12-01-2011 01-12-2010
             30             1                                                                             0               0                           0          1                    0                     0                     0          0
                    5         2200                 0                            0                            0              0                        0          0          0            0            0                    0                             0
                  0                          2201
    242604              242604          76         845         99          99                9999         9999              999 CRA 4 # 6 - 13                                                               24911846 12-01-2011 01-12-2010
             30             1                                                                             0               0                           0          1                    0                     0                     0          0
                   13         2200                 0                            0                            0              0                        0          0          0            0            0                    0                             0
                  0                          2201
    242605              242605          76         845         99          99                9999         9999              999 CRA 2 CLLES 3 Y 4                                                            24911509 12-01-2011 01-12-2010
             30             1                                                                             0               0                           0          1                    0                     0                     0          0
                    4         2200                 0                            0                            0              0                        0          0          0            0            0                    0                             0
                  0                          2201
SQL>
{code}

Need to read data from a jsp and insert in other jsp

Hi,
I have a jsp where i need to read from another jsp(which has data " header ---insert -----footer") and find a string "insert" in it and replace that string with a some value in the current jsp.
Thanx in Advance.
Sridhar.

I have a jsp
which needs to take headers and footers dynamically and insert them into my jsp.
currently what i am doing is, using a script to get these header and footer and using document.write
MYJSP.jsp looks this way
<script src="/../Headerfooter.jsp"/>
<script language="javascript">
document.write(header); -->defined in -> /HeaderFooter.jsp
document.write("<table>...</table>");
document.write(footer);-->defined in -> /HeaderFooter.jsp
</script>
/HeaderFooter.jsp looks this way
header = "<html>...<table width=\"100\">....";
footer ="....</html">
i dont want to use script bcoz i am getting problems in nestcape...

Do I have to use lock when I am reading data from a table

Hi,
When i am reading data from a table , do I have to set a lock on that table .
Is it necessary for us to set the lock on a table when I am reading data from the table.
When I am updating the table , do I have to set a lock on the table ?
If yes, then what sort of lock-read lock,write lock or shared lock?
Regards,
Sushanth H.S.

check it out,
Lock objects are use in SAP to avoid the inconsistancy at the time of data is being insert/change into database.
SAP Provide three type of Lock objects.
- Read Lock(Shared Locked)
protects read access to an object. The read lock allows other transactions read access but not write access to
the locked area of the table
- Write Lock(exclusive lock)
protects write access to an object. The write lock allows other transactions neither read nor write access to
the locked area of the table.
- Enhanced write lock (exclusive lock without cumulating)
works like a write lock except that the enhanced write lock also protects from further accesses from the
same transaction.
You can create a lock on a object of SAP thorugh transaction SE11 and enter any meaningful name start with EZ Example EZTEST_LOCK.
Use: you can see in almost all transaction when you are open an object in Change mode SAP could not allow to any other user to open the same object in change mode.
Example: in HR when we are enter a personal number in master data maintainance screen SAP can't allow to any other user to use same personal number for changes.
Technicaly:
When you create a lock object System automatically creat two function module.
1. ENQUEUE_<Lockobject name>. to insert the object in a queue.
2. DEQUEUE_<Lockobject name>. To remove the object is being queued through above FM.
You have to use these function module in your program.
check this link for example.
http://help.sap.com/saphelp_nw04s/helpdata/en/cf/21eea5446011d189700000e8322d00/content.htm
tables:vbak.
call function 'ENQUEUE_EZLOCK3'
exporting
mode_vbak = 'E'
mandt = sy-mandt
vbeln = vbak-vbeln
X_VBELN = ' '
_SCOPE = '2'
_WAIT = ' '
_COLLECT = ' '
EXCEPTIONS
FOREIGN_LOCK = 1
SYSTEM_FAILURE = 2
OTHERS = 3
if sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
Normally ABAPers will create the Lock objects, because we know when to lock and how to lock and where to lock the Object then after completing our updations we unlock the Objects in the Tables
http://help.sap.com/saphelp_nw04s/helpdata/en/cf/21eea5446011d189700000e8322d00/content.htm
purpose: If multiple user try to access a database object, inconsistency may occer. To avoid that inconsistency and to let multiple user give the accessibility of the database objects the locking mechanism is used.
Steps: first we create a loc object in se11 . Suppose for a table mara. It will create two functional module.:
1. enque_lockobject
1. deque_lockobject
before updating any table first we lock the table by calling enque_lockobject fm and then after updating we release the lock by deque_lockobject.
Select the radio button "Lock object"..
Give the name starts with EZ or EY..
Example: EYTEST
Press Create button..
Give the short description..
Example: Lock object for table ZTABLE..
In the tables tab..Give the table name..
Example: ZTABLE
Save and generate..
Your lock object is now created..You can see the LOCK MODULES..
In the menu ..GOTO -> LOCK MODULES..There you can see the ENQUEUE and DEQUEUE function
Reward if helpful

Read data from 2 tables.

Hello everyone,
I created a SQL database in phpMyAdmin. It contains 2 tables.
'Woninginformatie' and 'Makelaars'.
I use the next SQL query in my PHP file to read from the
database:
SELECT DISTINCT * FROM Woninginformatie
INNER JOIN Makelaars ON Woninginformatie.ID_mk =
Makelaars.ID_mk
WHERE Huiscode = $huiscode"
The query works correct and I get all the fields from both
tables. Anyway, in Flash I can only read out the information in the
table 'Woninginformatie'.
I use these kind of codes to read from the database:
eigendomssituatie =
gegevens.childNodes[0].childNodes[24].firstChild.nodeValue;
How can I also read data from the second table?

you can't read data from the 2nd table because because you
have a table issue, php issue or you can read data from the table
but are having trouble getting those data into flash? are you using
echo to return data to flash?

Reading Data from Internal Table

Hi,
Can anyone please tell me how to read data from Internal Tables in the Event Handler without using the Select statement OnInitialization?
Thanks,
Gaurav

Hi Siddhartha,
Can you tell me the problem in my code. I tried to work on the way you suggested. Though I have not finished with the coding, I just wanted to know whether I am going in the direction or not.
I have declared the the structure in Type Defination as
TYPES: BEGIN OF TEST_STRUC,
         BEGDA TYPE BEGDA,
         ENDDA TYPE ENDDA,
       END OF TEST_STRUC.
TYPES: TEST_TAB_TYPE TYPE TABLE OF TEST_STRUC.
In the Event Handler, I have added the following code on OnInputProcessing:
event handler for checking and processing user input and
for defining navigation
DATA TEST_INFO LIKE LINE OF TEST_TAB.
DATA: MYTAB6 TYPE TABLE OF PA0006,
      MYTAB6_WA LIKE LINE OF MYTAB6.
REFRESH TEST_TAB.
CLEAR TEST_INFO.
MYTAB6_WA-BEGDA = REQUEST->GET_FORM_FIELD( STARTDATE ).
MYTAB6_WA-ENDDA = REQUEST->GET_FORM_FIELD( ENDDATE ).
IF EVENT->NAME EQ 'button'
   AND EVENT->SERVER_EVENT EQ 'click'.
LOOP AT MYTAB6 INTO MYTAB6_WA.
    TEST_INFO-BEGDA = MYTAB6_WA-BEGDA.
    TEST_INFO-ENDDA = MYTAB6_WA-ENDDA.
ENDLOOP.
APPEND TEST_INFO TO TEST_TAB.
CLEAR TEST_INFO.
NAVIGATION->SET_PARAMETER( NAME = 'test_tab'
VALUE = 'begda' ).
NAVIGATION->SET_PARAMETER( NAME = 'test_tab'
VALUE = 'endda' ).
NAVIGATION->GOTO_PAGE( 'MyBSP2.htm').
ENDIF.
P.S. MyBSP2.htm is my next page.
Thanks,
Gaurav

Reading data from BSEG table with Non-key fields in where clause

Hi All,
    I have to read data from BSEG table based on WBS element field (PROJK). As I'm not passing key fields to WHERE clause system couldnt run the select statement. Since BSEG is a cluster table I cant even create secondary index on PROJK field.
   Could you please tell me, how to improve its performance.
Regards
Jaker.

SELECT bukrs
             belnr
             gjahr
             shkzg
             dmbtr
             hkont
             lifnr
             matnr
             werks
             menge
             meins
             ebeln
        FROM bseg
        INTO TABLE it_bseg
        PACKAGE SIZE 10
        FOR ALL ENTRIES IN it_final
        WHERE bukrs EQ it_final-bukrs
           AND belnr EQ it_final-belnr
           AND gjahr EQ it_final-gjahr
           AND buzei EQ it_final-buzei
           AND hkont EQ it_final-hkont
           AND werks IN s_werks.
By using package and fetch from BSEG table. gathering all other information to a final internal table.This will reduce the hit to database.And also try to put that data in hashed internal table which is it_bseg....then definetly improve the performance.
<REMOVED BY MODERATOR>
Dara.
Edited by: Alvaro Tejada Galindo on Apr 21, 2008 12:47 PM

Read data from VBFA table

hi gurus;
     I want to read data from VBFA table nd pass its VBELV to VBAK table to get VBAK values, Iam using FM SD_DOCUMENT_FLOW_GET ND RV_ORDER_FLOW_INFORMATION, BUT i am not getting desire result. WHEN iam using FM SD_DOCUMENT_FLOW_GET, it will give result only for last row of data, its not considering body part, so tell me how to used this FM properly.
data: l_docflow type tdt_docflow.
data lw_docflow type tds_docflow OCCURS 1 WITH HEADER LINE .
SELECT VBELN KNUMV BUKRS KUNRG REGIO NETWR FKSTO FKDAT FKART INTO CORRESPONDING FIELDS OF TABLE T_VBRK
      FROM VBRK WHERE BUKRS IN P_BUKRS AND FKDAT IN P_FKDAT AND VKORG IN P_VKORG AND REGIO = '07'
    ORDER BY VBELN KNUMV.
SORT T_VBRK BY vbeln.
LOOP AT T_VBRK.
    IF T_VBRK-FKART = 'F2' OR T_VBRK-FKART = 'YF2' OR T_VBRK-FKART = 'ZF2' OR
        T_VBRK-FKART = 'ZG2' OR T_VBRK-FKART = 'ZL2' OR T_VBRK-FKART = 'YG2' OR T_VBRK-FKART = 'YL2' .
      IF T_VBRK-FKSTO IS INITIAL.
    CALL FUNCTION 'SD_DOCUMENT_FLOW_GET'
EXPORTING
    IV_DOCNUM              = T_VBRK-vbelN
IV_ITEMNUM             =
IV_ALL_ITEMS           =
IV_SELF_IF_EMPTY       = ' '
IMPORTING
   ET_DOCFLOW             = l_docflow
LOOP AT l_docflow INTO lw_docflow   .
IF lw_docflow-vbtyp_V = 'C' OR lw_docflow-vbtyp_V = 'K' OR lw_docflow-vbtyp_V = 'L' OR lw_docflow-vbtyp_V = 'E'.
T_VBFA-vbelv = lW_docflow-vbelv.
T_VBFA-VBELN = lW_docflow-VBELN.
T_VBFA-vbtyp_V = lW_docflow-vbtyp_V.
APPEND t_vbfa.
endif.
endloop.
ENDIF.
endloop.
loop at t_vbfa.
if t_vbfa-vbtyp_V = 'C' OR t_vbfa-vbtyp_V = 'K' OR t_vbfa-vbtyp_V = 'L' OR t_vbfa-vbtyp_V = 'E' .
SELECT VBELN BSTNK BSTDK FROM VBAK INTO CORRESPONDING FIELDS OF TABLE T_VBAK FOR ALL ENTRIES IN T_VBFA
          WHERE VBELN = T_VBFA-VBELV .
endif.
ENDLOOP.

Hello
Use the below function module
RV_ORDER_FLOW_INFORMATION pass the type as C and pass the number.You will get all the flow.
SELECT VBELN KNUMV BUKRS KUNRG REGIO NETWR FKSTO FKDAT FKART INTO CORRESPONDING FIELDS OF TABLE T_VBRK FROM VBRK WHERE BUKRS IN P_BUKRS AND FKDAT IN P_FKDAT AND VKORG IN P_VKORG AND REGIO = '07'
    ORDER BY VBELN KNUMV.
SORT T_VBRK BY vbeln.
LOOP AT T_VBRK.
    IF T_VBRK-FKART = 'F2' OR T_VBRK-FKART = 'YF2' OR T_VBRK-FKART = 'ZF2' OR
        T_VBRK-FKART = 'ZG2' OR T_VBRK-FKART = 'ZL2' OR T_VBRK-FKART = 'YG2' OR T_VBRK-FKART = 'YL2' .
      IF T_VBRK-FKSTO IS INITIAL.
i_vbco6-vbeln = t_vbrk-vbeln.
CALL FUNCTION 'RV_ORDER_FLOW_INFORMATION'
EXPORTING
AUFBEREITUNG        = '2'
BELEGTYP            = ' '
    COMWA               = i_vbco6
NACHFOLGER          = 'X'
N_STUFEN            = '50'
VORGAENGER          = 'X'
V_STUFEN            = '50'
IMPORTING
BELEGTYP_BACK       =
TABLES
    VBFA_TAB            = t_vbfa
EXCEPTIONS
   NO_VBFA             = 1
   NO_VBUK_FOUND       = 2
   OTHERS              = 3
endif.
ENDIF.
endloop.
loop at t_vbfa.
if t_vbfa-vbtyp_V = 'C' OR t_vbfa-vbtyp_V = 'K' OR t_vbfa-vbtyp_V = 'L' OR t_vbfa-vbtyp_V = 'E' .
*clear t_vbfa.
SELECT VBELN BSTNK BSTDK FROM VBAK INTO CORRESPONDING FIELDS OF TABLE T_VBAK FOR ALL ENTRIES IN T_VBFA WHERE VBELN = T_VBFA-VBELV .
endif.
ENDLOOP.
In case of any more help is required do let me know
Regards,
Nabheet Madan

Read data from E$ table and insert into staging table

Similar Messages

Maybe you are looking for