Read image raw data without creating image

Is there any way to read image raw data into an array from a file but not creating an image ? I looked through ImageIO. It seems that every time an image reader is called , a bufferediamge is created or reused ?
Tanks fro any advice.

Similar Messages

Lightroom 5 will not read my Raw preview files no images in preview file to copy

lightroom 5 will not read my RAW preview file , no images in preview file to copy.instead of image file states , preview file unavailable for this file

alvinc wrote:
lightroom 5 will not read my RAW preview file , no images in preview file to copy.instead of image file states , preview file unavailable for this file
Hi,
Please provide more information ... such as:
- What are you trying to do? e.g. "Trying to import images from CF Card I get this message"
- What PC are you using? e.g. "Mac, PC, memory etc"
It is quite a cryptic thread but it sounds like you are trying to import directly from a CF Card, if you are copy the images to the hard disk then import.

Read all raw data out of the CAN bus

Hello,
our company has purchased a complete CAN bus HW; chasis 9174 and module 9862. I am using NI-DAQmx 9.5.5, NI-XNET 1.5.
I have connected the module (CAN High, CAN Low, Vsupp 12V - Car battery, GND - Car battery) to the ABS CAN bus segment.
Using Osciloscope on CAN High and CAN Low wires I can see communication rolling when I start the car ignition.
I had no success using the Bus Monitor utility.
I made a very simple read VI hoping to monitor some traffic.
All VIs run without error, but the Read VI is returning same data (Ignition off or on), I do not know what am I supposed to recieve, what kind of data is the output.
I think it is wrong, since I get the same data out of it no matter what the CAN bus traffic is.
The array of frames is filled with two frames with message identifiers that should be transmitted. I added two frames into emopty database and no signals.
1) From my understanding, the Bus Monitor utility monitors only those messages that I specify in the database, so that no messages/frames = no traffic monitored, is this correct ?
2) Is there any way, how to read all raw data from the bus ? What VI palettes to use... ?

Problem solved, the company that was preparing the car made wrong labels (swapped CAN H with CAN L)

How can I read the raw data by other program?

How can I use other program (such as C, MATLAB) to read the raw data acquired by biobench (*.bb)? Since the export function of biobench 1.0 is not convinient, I hope that I can read the data directly by decompressing the *.bb file. In other words, can one tells me the format of *.bb file?

Take a look at Top BioBench Support Solutions>>BioBench Support Files>>bbfileio.zip,here is the link: http://digital.ni.com/public.nsf/websearch/3ABE21AD33DA83B0862569B400810BAE?OpenDocument

Reader XI - Insufficient Data for an Image

Hello,
I have a few PDFs that I am unable to open. They give me an error saying 'Insufficient Data for an Image'. I have the latest version of Reader. I have tried to save the PDF in different formats. I have tried to reduce the file size and optimize the PDF. None of those worked. However, I am able to view the PDF using a web browser such as Google Chrome. This is not a solution, though, because I have users who need to be able to view the file inside of the Adobe Reader program.
I can provide the PDF to an Adobe employee if that helps. I'd rather not post it publicly because the PDF(s) in question is a company invoice.
If there is any more information I can provide please let me know.
Thank you!
EDIT: I've come to notice that many others have posted this issue with absolutely zero reply from anybody. I would prefer to use live chat considering this is what I feared when being directed only to a forum for support on this. I would appreciate ANY help or assistance with this issue.

Unfortunately I cannot provide a sample file as I cannot distribute the information contained in the problem files.
I've tried to replicate the issue printing pages I could distribute to .PDF, but so far I've only found the problem in the context of a web service that generates summaries of project information. Again, while I cannot provide I sample I can say that these are not complicated or heavily formatted tables, and have also displayed fine in the past.
Until the most recent Adobe update I never had any trouble viewing the .PDF files that Chrome generated of these tables.
Chrome has silent updates, so Chrome may have introduced the problem. I have no way of knowing what's going on with the backend of the web service that generates the tables so a change there may have introduced the problem.
Adobe Reader will still read my previously generated .PDF tables, so that suggests that the problem may have been introduced during the creation of the .PDFs. That said, the files remain valid .PDFs readable without difficulty by other software (ie. OS X Preview).
Based on my anecdotal Google trouble-shooting I'd submit that it appears that recent versions of Adobe Reader have suffered from some issue that creates failures to display the content of certain, otherwise readable .PDF files. While the scale of the problem may not be great, for those impacted it appears to call for the adoption of alternative .PDF viewing software.

Print data without creating a report

Hello,
I am using Oracle and Forms 10g. I have a table in tabular view with 10 records. I want to print those 10 records without creating a report. I have used the print button on the smartbar but it prints the entire form.
Is there a way I can print only the data in the datablock without creating a report?

Thank you very. A report is the solution to my problem. I was looking for something easier to implement but I see that there is not such a solution. I was hopping for example that you can press the print button, and get the data that are displayed in the data block. Your solutions work fine but are not easier to implement compared to the report solution.
Thanx very much for your trouble.

How to check image GPS data and get image file from image field

Hello,
I have some trouble and want to fix this problem.
1. I want to validate image file before its attached in image field about the image file have a GPS data or not. Have any way that can be check about image has contained a GPS data?
2. After validate image and PDF form is upload to the server. I want to get image file that embed in image field, because I have to extract image from PDF form and store this image in project image folder. If this topic can be fix by code script please give me some example code.
Thakyou for every comment and suggestion
Best Regards,
Mai

Hi Naill,
First I have to say thankyou for your answer.
About my (1) question, My image fields have set to be a embedded data and I try to test many example script of image fields.I can get image content type, image size. But that not work when I used ImageField1.desc.embeddedHref.value. It's response as "Unknown Embedded URI". Therefore, image field is and embedded data. How can I access filename?
(2) In that forum. As I see, his problem is about how to automate change image field with href image file. But I want to extract an exist embedded image in PDF form to normal image file with original metada (such as extract image filed to .JPEG with GPS data. Same as before attached in PDF form.). There has any concept or solution in this problem?
Best Regards,
Mai

JCO reading abap RAW data type (truncating?)

Does anyone have experience reading an Abap RAW data type using JCO? I am trying to read a GUID (via RFC_READ_TABLE) that is defined as RAW length 16. When I view this field in SAP GUI, I see 32 characters. However, when I read this field using JCO, I only see the first 16 characters.
The mapping documents state Abap RAW maps to a Java byte array. I have tried that - no luck. I have used the constructor of a string that takes a byte array - no luck. I have made sure my character set is UTF-8 in case Unicode was a possibility. I have turned on tracing to level 8 and only see 16 characters in the output. I need the other 16 characters as all 32 characters are used as the primary key into other tables.
I also posted this on the ABAP Java Development space. I know the rule about not cross-posting, but I wasn't sure which was a better place to post something like this. This my first post on here, so my apologies in advance.
Larry

Thanks for responding. Unfortunately, the export parameter list is null. There are no export parameters. However, there are tables. I have tried:
byte[] byteArray = funct.getTableParameterList().getTable("DATA").getByteArray(0);
My SE16 query only returns one field: GUID.
I only get 16 bytes back even though GUID is defined as raw length 32.
Is there something I else I should try? Do you see an error in my code?
Thanks again,
Larry

How to save Byte Array of raw data into JPEG image.

Hello!
I have a image and I stored its data as byte array as
bimage = bitmap1.getRawData();
now I have Byte[] bimage, I want to save it as .jpeg image.
and show that image..............

the short way is this:
ImageIO.write(bimage, "jpeg", new File("image.jpg"));
Where you use the original Image object... but it has to be a java.awt.image.RenderedImage (which a java.awt.image.BufferedImage is). So this method would come in handy.
     public static BufferedImage getBufferedImage(Image img) {
          // if the image is already a BufferedImage, cast and return it
          if((img instanceof BufferedImage) && background == null) {
               return (BufferedImage)img;
          // otherwise, create a new BufferedImage and draw the original
          // image on it
          int w = img.getWidth(null);
          int h = img.getHeight(null);
          BufferedImage bi = new BufferedImage(w, h, BufferedImage.TYPE_INT_ARGB);
          Graphics2D g2d = bi.createGraphics();
          g2d.drawImage(img, 0, 0, w, h, null);
          g2d.dispose();
          return bi;
     }If the byte array you have is raw image data, then you can look at the javax.imageio package and see what you can do with those classes.

Using Lightroom as RAW Converter without Importing Images

Hi-
I have a question that I can't find the answer to anywhere. i have images on my desktop that I'd like to convert from RAW to JPEG withOUT having to import them into LR.
What I mean is that I'd like to be able to open a folder, right click on an image, and convert it from RAW to JPEG in the folder. Is this possible? If it matters, I have Windows 7,
Thank you,
Kelly

Kelly, in order for Lightroom to see the raw file you have to import it. It's not a big deal, just a simple step in the process. Also realize that if you remove the imported raw files after development and exporting the jpegs, you will lose all the settings the images had and will have to start from scratch should you want to make adjustments later, unless you save the settings to XMP files.

SQL Developer Data Modeling-- Creating Image

Hi All,
I am trying to create JPG/BMP images in SQL Developer Data Modeling tool. My problem is as follows.
Problem :-
I have more than 1000+ tables and i have to create single ER diagram for that. I tried to create but after making some ER diagrams its unable to create.
Could you please any one tell me how can i create ER diagram for the same ?
Regards
Shivraj

Hello,
you can create sequences and triggers in Oracle physical model - you can find triggers under table node (physical model).
However it'll be better for you to do development of triggers in SQL Developer. After development of triggers is over you can put your triggers in data modeling physical model.
Best regards,
Philip

Dragging images into Aperture (without creating a new Project)

Hi All.
I am trying to pump out a slideshow and I am (in some cases) dragging an image from a desktop folder into a ALBUM in Aperture in which I want the photo. This Album is in a FOLDER with the name of the slideshow along with a number of other Albums in which I am organizing data for this project.
Aperture is creating a new Project in this folder every time I do this. They are labeled "Untitled Project", "Untitled Project(1)" etc. If I delete the Projects then the image is deleted from the Album that I want it in.
Is there a convenient solution for this? In some cases the image is already in Aperture but I don't have the time to go hunting for it and in fact it may not be int there.
Can I somehow create a "Dump Project" that will accept all these new images so that I don't clutter up the space with all the new Projects? Would I do this by dragging and dropping the individual images that are in each of these Projects to the Dump Project?
Any advice that doesn't involve switching out horses would be really welcome.
Thanks in advance!
- Jon

You can't import to an Album, only to a project. Every pic in the Library is in a project. It has to be. If you drag to an Album it will make new project to hold the file. So, don't drag to an Album, make a project and drag to that.
Regards
TD

Read NEF Location Data without Losing Edits

I have been using Lightroom since before the Map feature. At the time, I spent a lot of time using the Nikon ViewNX software to add location data into the NEF files. I now have a lot of older folders with location metadata in the NEF files and Lightroom edits in the catalog.
Is there a way for me to ask Lightroom to import only the location data from my NEF files without losing my work?
I tested the "Read Metadata from File" option on one file, and although it DID get the location data, it also nuked my other metadata (stars and edits).

Thanks everyone for your help.
I have been playing with a couple of scenarios and have found that with raw files (in my case NEF and CR2) it makes no difference whether you geotag first, then do a write metadata followed by a read metadata or whether you use the more logical sequence of first writing metadata, geotagging and finally reading metadata. With JPEGs the sequence DOES matter because Lightroom sems to overwrite valid GPS info with blanks when writing metadata to such files..
As for selecting a tool for applying geotags I guess everyone has his own favourite, I personally love GeoSetter (but use Jeffrey's other plugins extensively).
Cheers,
Leifur

How to read LONG RAW data from one table and insert into another table

Hello EVERYBODY
I have a table called sound with the following attributes. in the music attribute i have stored some messages in the different language like hindi, english etc. i want to concatinate all hindi messages and store in the another table with only one attribute of type LONG RAW.and this attribute is attached with the sound item.
when i click the play button of sound item the all the messages recorded in hindi will play one by one automatically. for that i'm doing the following.
i have written the following when button pressed trigger which will concatinate all the messages of any selected language from the sound table, and store in another table called temp.
and then sound will be played from the temp table.
declare
     tmp sound.music%type;
     temp1 sound.music%type;
     item_id ITEM;
cursor c1
is select music
from sound
where lang=:LIST10;
begin
     open c1;
     loop
          fetch c1 into tmp; //THIS LINE GENERATES THE ERROR
          temp1:=temp1||tmp;
          exit when c1%notfound;
     end loop;
CLOSE C1;
insert into temp values(temp1);
item_id:=Find_Item('Music');
go_item('music');
play_sound(item_id);
end;
but when i'm clicking the button it generates the following error.
WHEN-BUTTON-PRESSED TRIGGER RAISED UNHANDLED EXCEPTION ORA-06502.
ORA-06502: PL/SQL: numeric or value error
SQL> desc sound;
Name Null? Type
SL_NO NUMBER(2)
MUSIC LONG RAW
LANG CHAR(10)
IF MY PROCESS TO SOLVE THE ABOVE PROBLEM IS OK THEN PLESE TELL ME THE SOLUTION FOR THE ERROR. OTHER WISE PLEASE SUGGEST ME,IF ANY OTHER WAY IS THERE TO SOLVE THE ABOVE PROBLEM.
THANKS IN ADVANCE.
D. Prasad

You can achieve this in many different ways, one is
1. Create another VO based on the EO which is based on the dest table.
2. At save, copy the contents of the source VO into the dest VO (see copy routine in dev guide).
3. commiting the transaction will push the data into the dest table on which the dest VO is based.
I understand that if we attach VO object instance to region/page, we only can pull and put data in to only one table.
if by table you mean a DB table, then no, you can have a VO based on multiple EOs which will do DMLs accordingly.Thanks
Tapash

Re:read long raw data in Oracle and write to a file

So we need an mechanism to read data from LONG RAW and convert into actual file.
Regards

I've branched your post off from the thread you posted on ({thread:id=620757}) as it was an old thread.
When you have a question of your own, you should always start a new thread rather than tag onto old ones.
Please read: {message:id=9360002} and post some relevant information so that people can help you.

Read image raw data without creating image

Similar Messages

Maybe you are looking for