Read mode for querys

Hi,
I got a problem with a query whose read mode is currently "H".
When the Read mode is H the query is behaving diffrently. The query is being used in a workbook where profit cneter is dispalyed as hierarchy.
During the refresh of that query the nodes at the parent level are displayed whereas the nodes at the leaf level will be blank. If you try collapsing and expanding again the values will be displayed.
If the read mode is "X" then all the values are displayed at both parent level as well as leaf level.
But we are using Read mode as "H" for all the querys but we had no issues with other queries.
Now we got a problem with this query.
Any ideas will be appreciated!!
Thanks

hi Bwer,
  To prevent for accidentally deletion of master data, it is set into read mode for the developer. only guys who r designing the bw will usually have authorization to delte.From a company perspective, master data is important and should not be deleted or changed by any unathurosied users. only  with valid authorization one can delete/change the master data
  where as a cube, one can delete the contents by just deleting the request of the delta load
i hope this clears,
Assigning pts is the way of saying thanks in sdn
regards
ravi

Similar Messages

  • How can we send read mode for a query..?

    How can we send read mode for a query..?
    thanks in advance
    regards

    Hi Chaudhary.
    I am not sure I understand your question correct?
    Do you want to set a query to read only so it can not be changed? If so you should be controlling this with authorizations.
    Hope it helps.
    BR
    Stefan

  • Change read mode for all queries

    Hello, this should be an easy question for someone.  I believe there is a way to change the "read mode" for all queries at once.
    Can you tell me how to do that ?
    Thanks very much !!
    Keith

    Hello Bhanu,
    Iam not able to change query in my BW system but when i add authorization of SAP_NEW and SAP_ALL ,then iam able to change ,can i make modification in this table and then
    change or its a authorization problem.If this issue can be resolved with changing this table, kindly tell me how i have to call this table and wt parameters to change,kindly revert at earliest.I have sent u a mail also,kindly plz check.
    Regards,
    Saumya

  • Read mode for datasource

    Hello BW Experts,
    What is the benefit of read mode setting for the datasource ( master data).
    Thanks,
    BWer

    hi Bwer,
      To prevent for accidentally deletion of master data, it is set into read mode for the developer. only guys who r designing the bw will usually have authorization to delte.From a company perspective, master data is important and should not be deleted or changed by any unathurosied users. only  with valid authorization one can delete/change the master data
      where as a cube, one can delete the contents by just deleting the request of the delta load
    i hope this clears,
    Assigning pts is the way of saying thanks in sdn
    regards
    ravi

  • READ MODE for Hierarchies

    Hi,
    I have a Navigational attribute hierarchy in my query definition. The performance of the hierarchy is really bad after BW upgrade.In RSRT the technical info says
    Read Mode : Read During Navigation/Hierarchy Drilldown 
    Is that possible to change to Read during query load for only this query?
    What are the possible way to improve performance of the hierarchy drilldown rederring?
    Thank you
    Arun

    Hi,
    There is a setting in SPRO to change the Read mode of the InfoProvider Properties.
    What is the impact of changing to 'Query to read all data at once'?
    Reporting Agent -
      I enabled 'Precalculated Data' for web template read mode. I ran the reporting agent to pre-calculate data.
      I am trying to test whether if the data is pre-calcualated then will the improve the performance of the hierarchy.
    IMPACT -
      1. All th other navigation options are diaslbed, like 'arrow mark' to open web item tray.
      2. Hierarchy nodes are not opening.
      3. Context menu got disabled
    It looks like a complete static report.
    Did someone experienced this problem?
    Thank you
    Arun

  • Stor. Location in only read mode for Goods Movements (COR6)

    Hello World,
    How can I make the field "Storage Location" in mode "only read" in the part of "Goods Movements"?
    I tried using the SHD0 "Transaction Variant" and it worked partially, I mean the field is on "only read mode" but when you select a batch from another storage location the field changes and it can be saved.
    How can I restrict this transaction in order to only allow users to make movements from the predefined storage location (or not to change it).

    Hi,
    You can use Badi WORKORDER_GOODSMVT method GM_SCREEN_LINE_CHECK this method is called if a line is changed manually.
    Regards,
    Sankaran

  • Pdf form in read-mode for the users and...allowing me to save my new modifications

    I wanted to save a modification in my pdf form. Unfortunally, it was opened by another user in read-only mode.
    When I tried to save my new modifications, my screen pops me up the classic error message: cannot not save because it is opened in read....
    The form is stored in network shared drive and I am the owner. The users have the read only permission.
    I open it with Acrobat Pro X and users open it with Adobe Reader XI. Both sofwares are setted with the enable protected mode and javascript disabled,
    I tried to not use the preview mode in Windows explorer without succes.
    Is my problem a bug or is it the normal way abobe acrobat works ?
    Thank you for any replyer !

    Hello Gkaiseril,
    Thank you for your fast reply !
    I am not at my office right now, however I am pretty sure in the Word case, I will be able to edit.
    During my problem, I checked in the File manager on the server side (windows 2003 r2 sp1 x64). The reader had not write permission on the file, and I am the only owner with the full permissions.

  • Why is the 'Next' button in 508 Screen Reader mode not working for RichTree

    Hi ADF Experts,
    My JDeveloper version is 11.1.1.8. The 'Next' button in 508 Screen Reader mode for tables works fine.
    However, it does not work for trees, I can see only the first 23 or so items.
    Any ideas?
    What am I missing here?
    Regards,
    -ab

    There is no official JDeveloper version is 11.1.1.8.0!
    If you use an internal build ou should post to an internal forum.
    If you use an official version please tell us which on.
    Timo

  • Precautions to be taken while changing the Query read mode in PED system

    Dear Experts,
    I got a task to change the Query Read mode for more No. of queries in Production system directly itself.
    Request you to let me what are the steps to be followed/precautions to be taken while changing the Query Read mode in PED.
    one more doubt regarding this.....If i plan to change the Read mode of Query say Q1, how can i come to know weather the Q1 is executing or not executing by that time.
    Thanks in advance for valuable response.
    Thanks & Regards,
    Ramesh - Kumar

    Hello,
    You can change the query read mode in transaction 'RSRT', here are the steps:
    1) Access transaction RSRT and enter the query name
    2) Select the 'Properties' option
    3) Un-check the 'Info provider' setting next to the 'Read mode' --> This enables you to change the read mode of the query --> Execute
    4) Choose the option 'Generate Report' to re-generate the query program
    Hope this info helps.
    Thanks
    Bala

  • Terminate: Invalid read mode

    After checking query, system show me the error message - Terminate: Invalid read mode, the detailed information as below, please help to solve this issue. Thanks a lot!
    Terminate: Invalid read mode [A017(BRAIN)]
    Diagnosis
    If queries (often unintentionally) are assigned the read mode "Query to Read All Data at Once", this often results in performance problems. To eliminate this problem, this warning is displayed when you execute a query with this read mode when the query is generated.
    System Response
    Procedure
    Procedure for System Administration
    Before you execute the query, repair the read mode:
    You can repair the read mode for this query in the Query Monitor (transaction RSRT1). You can set the read mode for the selected query by choosing Query -> Read Mode.
    If this warning is displayed when you check a query, you need to change the default read mode for new queries in the InfoCube in InfoCube maintenance. In InfoProvider maintenance, choose Environment ->InfoProvider Properties -> Change and make the relevant settings on the Query/Cache tab page.

    Hi,
    Goto Tcode -  "RSRT ", in that specify the query name and change the Read mode.
    After changing this again execute the Query in that RSRT, adn check whether every thing is ok or not....
    Assign points if it helps.......

  • Invalid Read Mode

    Hello BW Experts
    While running the query I am getting the error invalid read mode. Is it any settings that we could do in the query level or RSRT. Please suggest to get rid of this error.
    Thanks,
    BWer

    hi BWer,
    oss note 432596
    Change the read mode before you execute the query: You can change the read mode of a specific query using transaction RSRT. Choose Query -> Read mode to set the read mode for a selected query. If this warning message is displayed when you call up a query, you have to change the default read mode for new InfoCube queries in Customizing for BW (Tools > Business Engineer > BW Customizing > SAP Reference IMG ). The default read mode is under the node "BW Customizing Implmentation Guide > Business Information Warehouse > Reporting-Relevant Settings > Set Read Mode for InfoCube
    You can also change the read mode for all queries and the default read mode for all InfoCubes using transaction RSRT. Choose Environment -> Repair read mode. This is where you can change all non-allowed read modi to "Subsequenlty read by navigation".

  • Read Mode Navigation Block

    Is it possible to use the read mode as set in the InfoObject maintainance in the navigation block of a web application?
    The Parameter BOOKED_VALUES can only be set to either M,D or Q and this setting is valid vor all InfoObjects.
    I don't want to use BOOKED_VALUES_N to specify the read mode for each object but use the read mode as set in the infoobject maintainance.
    Thanks,
    Beat

    Hi,
    There is a setting in SPRO to change the Read mode of the InfoProvider Properties.
    What is the impact of changing to 'Query to read all data at once'?
    Reporting Agent -
      I enabled 'Precalculated Data' for web template read mode. I ran the reporting agent to pre-calculate data.
      I am trying to test whether if the data is pre-calcualated then will the improve the performance of the hierarchy.
    IMPACT -
      1. All th other navigation options are diaslbed, like 'arrow mark' to open web item tray.
      2. Hierarchy nodes are not opening.
      3. Context menu got disabled
    It looks like a complete static report.
    Did someone experienced this problem?
    Thank you
    Arun

  • Invalid read mode while executing the query

    Hi,
    I have developed a query based on a cube in MM module.
    When I try to execute the query, the following error is being displayed:
    Invalid read mode
    Message no. BRAIN017
    Diagnosis
    If queries (often unintentionally) are assigned the read mode "Query to Read All Data at Once", this often results in performance problems. To eliminate this problem, this warning is displayed when you execute a query with this read mode when the query is generated.
    Procedure for System Administration
    Before you execute the query, repair the read mode:
    u2022     You can repair the read mode for this query in the Query Monitor (transaction RSRT1). You can set the read mode for the selected query by choosing Query -> Read Mode.
    u2022     If this warning is displayed when you check a query, you need to change the default read mode for new queries in the InfoCube in InfoCube maintenance. In InfoProvider maintenance, choose Environment -> InfoProvider Properties -> Change and make the relevant settings on the Query/Cache tab page.
    Please let me know what are the exact setting that I need to do and where.
    Thanks in advance.
    Will assign points for the solution.
    Thanks & Regards.

    Hi Ganesh,
    You can change the read mode by going to transaction RSRT, entering the query name and then clicking the properties button. A dialog box will then be displayed that allows you to change the read mode.
    The question of what's the best read mode for you query depends on the requirements of the query:
    If you choose "read all data at once", it will take quite awhile before the first view of the query is shown. This is because it basically reads all data needed for your query (e.g. data for hierarchy nodes etc). However, after the initial view, successive navigations might be a lot faster.
    The read mode "Read data during navigation and expansion of hierarchies" is usually the best mode. The initial view will show up in the least amount of time in this mode. However, when the users start to navigate, data will then be read from the database (aggregates, or the main cube tables) or the cache.
    The read mode "Read data during navigation" is like the "Read data during navigation and expansion of hierarchies" mode. However, it will also read the data for the hierarchy nodes. Expansions of the hierarchy will therefore be faster in this mode. Of course, there's additional overhead for the initial view.
    Hope this helps. Cheers.

  • "Full Screen Mode" in Adobe Reader XI for Windows 8 loads way too slow!

    I recently got a new laptop with Windows 8, after having used Windows Vista for years.  I installed Adobe Reader XI for my new computer.  Before, I used Adobe Reader X on Vista.  I used Adobe Reader "Full Screen Mode" to read the nice-looking Bible chapters I created with internet audio from Biblegateway.com.  In Vista, the "Full Screen Mode" appeared quickly, before the audio fully started, so I could see the text in time for the reading. 
    However, with Windows 8, "Full Screen Mode" takes around 5-10 seconds to appear at all, and a black screen is present throughout the wait.  It does the same thing when I hit "escape" to exit "Full Screen Mode" as well.  I even uninstalled Adobe Reader XI from my new laptop, and tried using Adobe Reader X, even though it is not recommened by Adobe to do that on Windows 8, in order to test the speed of "Full Screen Mode" there.  Adobe Reader X had the same problem!  I do not know if this can be fixed, but I am pretty unhappy about it!  I enjoyed the "Full Screen Mode" with my PDF chapters and the online bible audio!  Finding that function for the first time with Adobe Reader X was a delight for me!  It gave the reading a theater feel!
    Has anyone else here had a similiar problem with "Full Screen Mode" loading way too slow on Windows 8?  I am very disappointed!  If this cannot be fixed by a user, is there a place to complain to Adobe and make a recommendation for software improvement?  Thank you!             

    From: Test Screen Name [email protected]
    Sent: Sunday, August 04, 2013 11:32 AM
    To: gunner0490
    Subject: I'm not able to open PDF files in Adobe Reader XI.
    Re: I'm not able to open PDF files in Adobe Reader XI.
    created by Test Screen Name <http://forums.adobe.com/people/TestScreenName>  in Adobe Reader - View the full discussion <http://forums.adobe.com/message/5565198#5565198

  • How to modify edit/read mode pop up for documents in "SP2013" to open in only read only mode

    Hi,
    When opening a document the users of my site and including me are getting a pop up asking to open it in read only or edit mode. We want to disable the edit option for end users. Those are confidential doc's. 
    We want them to open only in read only mode. How can it be achieved.
    Can we FORCE a read-only open of the document without giving anyone the option to open in edit mode? I don't have access to Central Admin. Hence kindly let me know if there is some javascript
    code that i can use to do this from browser.
    thank you !

    Hi Prajk,
    If users have edit permission on the documents in this library, even if we disable this dialog (by disabling the add-on "SharePoint OpenDocuements class" from IE browser), the users sitll could download the documents to local machine, and
    edit the documents in client Office application, then sync to library.
    If you want the users to read these confidential documents only, you can only grant the users read-only permission on the document items or on library level, then they could unable to edit these confidential docs, note to give proper users
    proper permissions.
    If you also want that the confidential docs could be opend and read-only in client Office application, you can configure the IRM (implemented by RMS) for SharePoint server, then set the document items in the library read-only for
    some users.
    https://technet.microsoft.com/en-us/library/hh545607%28v=office.14%29.aspx?f=255&MSPPError=-2147217396
    https://support.office.com/en-in/article/Apply-Information-Rights-Management-to-a-list-or-library-6714cfe3-ef39-43b0-bb65-a887726bb63c?CorrelationId=ebcf6a01-1d3c-4b75-86ae-c11322065be6&ui=en-US&rs=en-IN&ad=IN
    Thanks
    Daniel Yang
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

Maybe you are looking for

  • Calling a page after creating a primary key?

    Hello, I have a form on a table with a create button on it. The primary key is created after I click the CREATE button, and brings me back to the report which shows my new record. Everything is fine here. Now, I want to branch to a new page (after pr

  • Website created in FrontPage does not display correctly in Safari

    Using StoreFront software (PC based only), we have created a website that performs beautifully in Explorer and Netscape on a PC. For some reason, not all pages open properly on a MAC. It is the left column that does not open properly on the dynamical

  • Ive lost my cd for my Photoshop... is there another way to transfer/download onto another computer? i still have my code.

    I'm wondering if I can transfer/download my Photoshop onto another computer? I've lost my CD. I still have my code.

  • Load balance xml config store

    Hi My environment is a workgroup, so failover clustering or other domain based solution are not suitable. I want to make the xml config store highly available: server1 and server2 will be behind a load balancer, both servers will have a file share na

  • Gone mailbox

    Hi everyone, After opening the mailbox - it seems like it is brand new and asks me to set up a mail account. I previously experienced the same situation, I solved it with help of some forum by deleting some files- I can neither recall the forum nor t