Read Only Access to Storage Container

Is it possible to give Read Only access to a particular storage container without adding someone to Subscription and providing them the access key without anonymous request without going through SAS route

By default, a container and any blobs within it may be accessed only by the owner of the storage account. If you want to give anonymous users read permissions to a container and its blobs, you can set the container permissions to allow public access. Anonymous
users can read blobs within a publicly accessible container without authenticating the request.
This link gives full details
https://msdn.microsoft.com/en-us/library/azure/dd179354.aspx
Frank

Similar Messages

  • OAS 10g (10.1.2) - Read only Access Required to oc4j Container Settings

    As a load tester I need to be able to access the details of the container settings for our live servers to enable me to mimic this set up on my test kit.
    of particular interest are the Server Properties and Data Sources for each container.
    I am not permitted a username/login for the live OAS.
    The Unix admins looking after this kit tell me it's not possible to grant me read only access.
    Is this the case?
    Is there any other way for me to get this information without a live login - can OAS export the details of these settings?
    It's very frustrating to have to rely on info handed down from the Unix admins as and when they have the time to give it to me!....
    Any help much appreciated....

    The Unix admins looking after this kit tell me it's not possible to grant me read only access.
    Is this the case?
    NO, the UNIX Admins are full of it. Here are several (but not all settings)
    400 Owner Readable
    600 Owner Readable and Writeable
    700 Owner Readable and Writeable and Execute
    740 Owner Readable and Writeable and Execute Plus Group Readable
    760 Owner Readable and Writeable and Execute Plus Group Readable and Writeable
    770 Owner Readable and Writeable and Execute Plus Group Readable and Writeable and Execute
    774 Owner Readable and Writeable and Execute Plus Group Readable and Writeable and Execute and Other Readable
    776 Owner Readable and Writeable and Execute Plus Group Readable and Writeable and Execute and Other Readable and Writeable
    777 Owner Readable and Writeable and Execute Plus Group Readable and Writeable and Execute and Other Readable and Writeable and Execute
    Is there any other way for me to get this information without a live login - can OAS export the details of these settings?
    Sorry I don't know the answer to this one
    And don't tell the Unix admins your handle is "TestCowboy" most of them don't have much of a sense of humor. (But I think its great!)

  • Read only access to J2EE related tools

    Hello,
    I would like to help our auditors access everything they need to check in the Java systems, but I am not ready to give them ADMIN accounts. That`s why I need some kind of read only access for them.
    So I would like to ask you if there is a SAP Note about the read only access roles for J2EE/ Java AS?
    I am afraid there is no such note available, so can anybody share any experience with granting read only access to the Java system? I know how to grant access to the whole NWA, but what about the rest?
    Examples:
    - is there a way how to grant read only access only to the UME?
    - is there a role for read only access to the portal PCD?
    - is there something similar for KM access?
    Or has anybody ever tried to split the admin roles into smaller pieces? Is there a description/ document how to do such thing?
    Thank you for your time and effort,
    cheers Otto

    Hi,
    thanks for trying, but I can use help.sap.com and was on that page before.
    Maybe if there were any examples there or better: if the whole thing would be more granular (I see no point in using roles starting with SUPER, containing ADMIN or ending with ALL). I am looking for roles for surgery or for auditing. I don`t want to give anybody these super/admin/all roles just like that.
    If you can suggest how to use that page, that would be cool. Otherwise I see no use.
    By the way: another question of mine about surgery: How to restrict access to download/ upload UME configuration file
    I would like to know how to controla access to this specific feature, nothing else.
    Thanks for the time and effort,
    cheers Otto

  • Granting Read Only Access to user in another schema

    Oracle Database 10g
    Red Hat Enterprise Linux Server release 5.3
    We are requested by a developer to grant his account read only access to TABLES, VIEWS, INDEXES, SEQUENCES, FUNCTIONS, PROCEDURES, PACKAGES, TRIGGERS, JOBS of another schema.
    I know granting read only access to Tables and Views. But is it possible to grant READ ONLY access to other mentioned objects ? How to do it ?
    And some views are in INVALID status.
    I tried to compile them using alter view owner.viewname compile;
    But got this ---- Warning: View altered with compilation errors.
    Those views are still in INVALID status. And then I tried to use utlrp.sql . Same result.
    Then I used the following
    SELECT TEXT FROM DBA_VIEWS WHERE VIEW_NAME='view-name';
    select REFERENCED_NAME,REFERENCED_TYPE from dba_dependencies where name='view-name';
    It turns out some reference types are non existent.
    Does that mean DBAs cannot do anything about this ?

    Nilton wrote:
    We are requested by a developer to grant his account read only access to TABLES, VIEWS, INDEXES, SEQUENCES, FUNCTIONS, PROCEDURES, PACKAGES, TRIGGERS, JOBS of another schema.
    I know granting read only access to Tables and Views. But is it possible to grant READ ONLY access to other mentioned objects ? How to do it ?
    TABLES -> YES grant SELECT
    VIEWS -> YES grant SELECT
    SEQUENCE -> YES grant SELECT
    INDEXES -> There is no read access for indexes...indexes are put on tables and a user who has read access on tables can read the index as well.
    FUNCTIONS / PROCEDURES / PACKAGES -> I am not sure what you mean by read access on procedures, functions and packages. You may grant EXECUTE privilege on these.
    TRIGGERS -> there is no read access on triggers required. They are implemented on tables for a DML event. If the user has DML access he has the execute access on the trigger as well.
    JOBS -> I am not sure what to read from Jobs.
    And some views are in INVALID status.
    I tried to compile them using alter view owner.viewname compile;
    But got this ---- Warning: View altered with compilation errors.
    Those views are still in INVALID status. And then I tried to use utlrp.sql . Same result.
    Then I used the following
    SELECT TEXT FROM DBA_VIEWS WHERE VIEW_NAME='view-name';
    select REFERENCED_NAME,REFERENCED_TYPE from dba_dependencies where name='view-name';
    It turns out some reference types are non existent.
    Does that mean DBAs cannot do anything about this ?There are compilation errors in the Views. e.g. the view may be referring to a table which doesn't exist etc.
    Unless you fix the error in the view you can't compile it and male it valid. Fix the view errors. If objects are non existing create them or refer to view to some where else.
    If the nonexistent objects were mistakenly dropped, or the data file which contained those objects was dropped, no matter what was the reason for that object to be gone a DBA can bring it back if he is a well prepared DBA and has setup his database for such kind of disasters.
    Now tell us why those objects are non-existent ? were they meant to be gone ? or they were dropped mistakenly?
    Now here are my guesses:
    If they were meant to be gone then probably the views definitions need to be adjusted not to refer them anymore.
    If they were mistakenly dropped then:
    Do you have them in recyclebin? (only tables) if YES just FLASHBACK TABLE <<tablename>> AS BEFORE DROP.
    Is your database has Flashback database ON? if YES FLASHBACK DATABASE until 'time/scn just before the object was dropped'
    Do you have backups and your database is running in ARCHIVE LOG mode? if YES perform an incomplete recovery using RMAN.

  • I got the message, "Photos have read-only access."-Macintosh

    I've read this post, http://forums.adobe.com/message/5516195#5516195, but am having the same issues on a Macintosh (LR 5, 10.8.4) with random images.
    The folders all have read/write access and the images contained have the same.  I'm logged in as admin, and have full permission.
    The images reside on an external HDD connected to an Airport Extreme BaseStation, on a Macintosh formated (Journaled) HDD
    -Y = Metadata is written successfully
    -N = Photos have read-only access
    Folder01
    -Image01-Y
    -Image02-N
    -Image03-Y
    -Image04-Y
    Folder02
    -Image01a-N
    -Image02a-Y
    -Image03a-Y
    -Image04a-N
    If I modify the images in Preview, and save, and then go back to LR and save the LR changes "stick".
    I've even gone to the parent folder (Folder01, Folder02) and set permsisions to 777 (using PathFinder 6), and applied to all enclosed items, and it still won't change them.  I'm looking at the same images in Finder and the permissions are read/write for all users and the images are not "locked".

    Okay, got it. I'm a bit confused why I had to this, but I did and it worked.Here is the solution.
    1. Go to my computer.
    2. Right click on the hard drive and select properties
    3. In the properties window, select the security tab
    4. Then click the edit button
    This is where it is weird. I'm logged in as an adminstrator, and the administrator account has allows all permissions (except special permission). You would think that since I'm working as in administrator mode, I could write into files. I can't.
    So, I checked the user account (same name as my admin account). Here the follwong boxes were not checked.
    1. Full control
    2. Modify
    3. Write
    I made sure all three of those were checked and now I can write metadata into the DNG files.

  • I saved photos from my Macbook Pro onto my Iphone (using itunes, 4 years ago). My macbook is now dead and I need to get the photos I saved off of my iphone 3GS transferred to a pc.  Any help...  From my PC I can only access "internal storage"

    I saved photos from my Macbook Pro onto my Iphone (using itunes, 4 years ago). My macbook is now dead and I need to get the photos I saved off of my iphone 3GS transferred to a pc.  Any help...  From my PC I can only access "internal storage"

    The iphone is not a storage/backup device.  The picture sycn is one way - computer to iphone.  The photos are also reduced in size when synced to iphone so they are not of the original quality
    It has always been very basic to always maintain a backup of your computer.
    Have you failed to do this?
    If so, not good at all, you can e-mail the pics to yourself - keep in mind they will never be of the original quality

  • Read Only access to UCCX server

      Hi,
    I would like to know if it was possible to create an account for Read Only access for server in UCCX 8.02.
    Saima

    Saima,
    Unfortunately no it is not, you have either Admin access or supervisor access. The admin access has full access and supervisor access allows configuration of the RM subsystem either foe own team or all teams.
    HTH,
    Chris

  • Read-Only Access to Specific SAP tables

    Is it possible to grant a user read-only access to a specific table or tables?
    For example, say I wanted to give someone SE16N capability for just EKKO/EKPO/EKBE and NO OTHER tables.  Is this possible?  How?
    Thanks.

    Hi,
    as it was mentioned the transaction SE16N checks for authorization object S_TABU_DIS. The problem in your case is that the tables EKKO, EKPO and EKBE are already assigned to the authorization group MA - MM Appl. table. But there are many more tables assigned to this group. Changing assignment of standard tables is not a good idea.
    Cheers

  • Read Only access to tablespace

    Hi,
    Oracle 10.2.0.4
    How can I grant read only access to a tablespace for a user.
    Thanks

    It is no ussual.... a tablespace is a box where one or more user store his data... sure you do not want to say user and not tablespace?
    Grant select to the objects of this tablespace...DBA_TABLES or ALL_TABLES...
    Select 'GRANT SELECT ON ' || OWNER || '.' || TABLE_NAME || ' TO <USERNAME> ' FROM DBA_TABLES WHERE TABLESPACE_NAME = <TABLESPACE>

  • View read allows read only access

    Hi friends,
        I have created maintainance view, I am getting this warning " View read allows read only access , Maintainance not possible". So to avoid this, what should i do now.
    Thank you

    Hi,
    In Delivery and maintence check if the field Data Browser/Table View Maint. has the value delivery and maint allowed
    or delivery and maint allowed with restrictions.
    Regards,
    Rajesh Kumar

  • Read-only access when saving metadata to file from Adobe Lightroom on a MAC OS to Windows shared drive

    We have a group of 5 people editing and indexing photos to a shared drive on a windows server, everyone has its own catalog and working on different folders to avoid any locking conflicts.
    The windows computers don't have any problems but the Mac's don't write the updated metadata to all files because they get the message "Photos have read-only access".
    The environment is the following:
    2x Macs workstations running:
    - Adobe Photoshop Lightroom 5.7.1
    - iMAC with MAC OS X Yosemite 10.10.2
    3x Windows Workstations:
    - Windows 7
    - Adobe Photoshop Lightroom 5.7.1
    Server:
    - Shared drive on a Windows Server 2012 Standard
    I have searched the internet, no one has this problem with this exact setup but I have tried all the solutions I found, namely:
    1. Connect to the network drive with cifs:// protocol
    2. Change the settings of the nsmb.conf for 'smb1_only' protocol
    3. Mount the drive manually by command line
    Nothing worked, any ideas?

    Did you ever find a solution to this problem?  I have the same issue and wonder if Lightroom 6 will resolve it.  I  tried AFP, SMB2, SMB3 and they all failed to save metadata randomly. When I use NFS from OS X then it works fine but it's a little slower than SMB and it's not as native as the mount via AFP or SMB, so it's harder to maintain.     My server is a FreeNAS 9.2 (FreeBSD) which is running Samba, Netatalk and native NFS.

  • How to configure Mailbox Read-Only access for Mailbox's owner on Exchange Server 2010?

    I have to configure the Exchange Server 2010's mailbox to only grant Read-Only Access on the mailbox's owners.  So they can only allowed to read their messages and cannot modify or remove them.  Are there any references or methods to do?

    Hi,alexchy8
    We can make use of 2 PowerShell commands to achieve this goal.
    Add-MailboxPermission and Add-MailboxFolderPermission.
    Execute the Add-MailboxPermission command to delegate the read permission at mailbox level.
    Execute the Add-MailboxFolderPermission command to delegate the required permissions on specific folders inside the mailbox.
    You can read the following article as reference:
    http://www.exchangedictionary.com/articles/assign-read-only-mailbox-permission-on-exchange-2010-2013-powershell
    Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety,
    or suitability of any software or information found there. Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
    Best Regards.

  • XCM(Extended Configuration Management) Read Only Access for Webshop

    Hi,
    We dont hav e XCM admin access in our project.We need to have just the view(read only) access.This will help us immensly during any troubleshooting. Plus we will save a lot of time while troubleshooting if the view access is avaialable to us. In case of any issues in the XCM setting, we can easily pin point the issue and ask the ERP team to change it. In absence of it we can only speculate what could have gone wrong on the XCM side. Is there any role in XCM so that we can get just read only access.
    Regards

    Hi,
    The below note will help you.
    Note 1014383 - Read only user in the XCM and Administration area of ISA
    Regards,
    Shanto Aloor

  • How enable read only access for ACS server itself

    Hi,
    We would like to know whether its possible to create a read only access to the ACS server. Currenlty ACS server has a generic login with full admin rights.
    We need to create a login to couple of users to log into ACS to check the "Report and Activity" tab. Access to all other tabs should be disabled.
    We are using ACS4.0 verison. Please let me know whether its possible.
    Thanks
    Nachi

    Hi,alexchy8
    We can make use of 2 PowerShell commands to achieve this goal.
    Add-MailboxPermission and Add-MailboxFolderPermission.
    Execute the Add-MailboxPermission command to delegate the read permission at mailbox level.
    Execute the Add-MailboxFolderPermission command to delegate the required permissions on specific folders inside the mailbox.
    You can read the following article as reference:
    http://www.exchangedictionary.com/articles/assign-read-only-mailbox-permission-on-exchange-2010-2013-powershell
    Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety,
    or suitability of any software or information found there. Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
    Best Regards.

  • How to create a user with read only access for ESB / BPEL Console

    I need to create a user with read only access to ESB Console & BPEL Console. I have created a user
    (esbreadonly) and assigned ascontrol_monitor role but user is still able to
    delete services from ESB systems (such as DefaultSystem). Is there any way to
    create a user that has strickly read only access to ESB Console & BPEL
    Console
    Thanks
    Dinesh Patel

    Check out this post.. I'm in the process of testing.
    http://chintanblog.blogspot.com/2007/12/i-saw-numerous-people-asking-about-bpel_290.html

Maybe you are looking for