Reader 10.1.3 won't print on Mac OS 10.7.3

Mac OS 10.7.3, Reader 10.1.3, PDF file, won't print, error msg says "no pages selected" but they are. Irritating to have to select "print as image" for EVERY print selection.

Does this happen with all pdf document? Could you send me any one pdf document with which you are facing this issue?
mail me at [email protected]
Thanks,
Atul

Similar Messages

Adobe Reader 10.1.3 won't print - and Adobe won't talk to me on the phone.... help please....

Adobe Reader 10.1.3 won't print - and Adobe won't talk to me on the phone.... help please....

There isn't free support for free software, but perhaps we can help.
Please let us know
* Your system (e.g. Windows 7)
* What happens when you try to print, including messages in full.

My canon 5320 has ink but won't print on mac os 10.7.5

my canon 5320 has ink but won't print on mac os 10.7.5

Hi olschoolmike_1,
To try and resolve the issue, you will want to confirm that the inkjet nozzles are dispensing the ink correctly by printing a nozzle check pattern from the printer. If the pattern does not print correctly, we recommend performing at least one cleaning and two deep cleanings on the printer to try and get the ink to print.. To print the nozzle check pattern and perform the cleanings, please follow the steps located here. If you still experience difficulty after performing the cleanings, please call or email us using one of the methods on the Contact Us page for further assistance.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Adobe reader shows text but won't print all the text

I have a form used by many and it works with no problem. Today one came in you could see all the text, but when printed, only some of the text appeared.
I checked it on 3 machines, also one that has Acrobat 9 on it, same results.
On the print setup, under comments and forms, I have Documents and Markup set, but if I click on "form field only" I do get the missing text.
As said we have gotten many forms from other people, no problems, so it really not for lack of knowing how to print it correctly.
The only print preview I can see I have is when I go to print it, it appears on the right, and it is missing the text there.
I have removed all name and address from the form for privacy reason, I did add my name in a few blocks and then saved it but it won't print that also.
for some reason only the top row under CPR AED and SFA print, but as you can see, there are a bunch that don't, along with all the names I removed.
Thanks in advance.
John
Any ideas?
Tuesday--still working on this, I activited the voice part of my acrobat 9 and it reads all the text while in PDF form, just won't print it.
John

Restarted computer and seems to be working again.

Reader 10.1.2 won't print

Operating System XP SP3. Installed Reader 10.1.2 and now cannot print pdf's opened in IE8, nor pdf's opened directly in the reader. Printer (HP Laserjet 1020) "prints" a blank sheet, then displays error signal and has to be switched off and on again before it will print anything else, from any other source. Prints WORD 2003 documents perfectly - as always. When previous reader version was in use, there were no problems. It looks as though an urgent error fix is needed - am I right?
Brian.

Thanks Ankit_Jain. It works fine
Following latest security update from Adobe for Acrobat Reader, I was unable to print anything anywhere (Reader crashing). Even reinstalling from scratch didn't change anything.
After I followed the workaround listed (Reader 10.1.2 does not print), I shared all the printers from my XP Virtual Machine, thus allowing me to print again.

Printer connected, printer works, but won't print from Mac

I'm helping someone with a printer problem, and I have a mystery on my hands.
The printer is connected (directly), shows up in the printer list, can print a test page, but won't print any document from this computer (it's fine from my laptop).
It's a Mid-2011 Mini, 2.3Ghz, running 10.7.5. The printer is an Epson WF-2540.
This is a USB printer, connected directly to their Mac.
In "Settings", when you select Print/FAX and print a "Test Page" - Success! This is a process that invokes the Epson Driver directly [and bypasses the MAC print queuing mechanism]
When "Printing" from within any application (firefox, TextEdit, winders...)   The job starts to queue, but errors before engaging the printer.
R & R the Epson Drivers, Clear the Printer "stuff" on the Mac, Reinstall drivers from the Epson website, Mac wants to update the "newest" Epson Drivers (kinda' funny when I think about it...).
Still errors.
I attached directly to a USB port on my MacBook Pro. Download drivers, etc.. Works like a champ!
We have deleted the printer from System Prefs, rebooted, and added it back.
We have even gone into Terminal and...
sudo bash
cd /etc/cups/ppd
ls
found EPSON_WF_2540_Series.ppd
cp * /var/tmp/
ls /var/tmp/*.ppd
rm /etc/cups/ppd/*
Still doesn't work.
Anybody have any suggestions?

Hi, it's not clear... did you Rest the Printing system on the Mac?
10.5/10.6/10.7/10.8 instructions...
In System Preferences>Fax & Print, Right click or Control+click on the Printers list Sidebar, choose Reset Printing System.
if you hold option and click the "-" tab it resets the printing system.
http://www.macosxhints.com/article.php?story=20031215144430486
Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions.
Any devices that previously appeared in your Printer List and Fax List will need to be added again after resetting the printing system.
Resetting the printing system in Mac OS X 10.5.x+++
    1.    To use the Reset Printing System feature in Mac OS X 10.5.x, follow these steps:
    2.    Choose System Preferences from the Apple menu.
    3.    Choose Print & Fax from the View menu.
    4.    Control-click on list of printers on the left side of the window, then choose "Reset printing system" from the contextual menu. If you don't see a list of printers, Control-click on the text "Click + to add a printer or fax" and select "Reset printing system..."       As an alternative, if you currently have one or more printers listed, you can Option-click the "-" (Remove printer) button.
http://support.apple.com/kb/ht1341
Reboot.

Reader 10.1.4 won't print

HP 1080 printer used to print pdf docs from a win 7 64bit machine.
Still prints other docs have tried installing different versions of reader.
Reader print interface acts like it processes the doc but no jobs show in
the printer spooler interface.
Suggestions appreciated.

Do you have Print to File checked?
Can you try Print as Image?
Anyway, you should update to 10.1.8, the latest 10.x version, or 11.0.5

Adobe Reader 11.0.7 won't print on my MAC OS X 10.9.3 (internal error)

When I initially open documents, I get this type of error messages. If I reload the page, then the PDF or document usually opens but will not allow me to print. I have uninstalled and reinstalled the application 30+ times at this point, have talked to Apple, QuickBooks, Intuit, and Adobe on the phone, though Adobe doesnt offer support for Reader or Acrobat. I am mostly trying to use my QuickBooks and Intuit payroll system to help start my new business. These require the use of adobe and I cannot print out required forms or run payroll! PLEASE HELP!!!!!!!

OS X Mail: Troubleshooting sending and receiving email messages

Reader 9.3.1 won't print issue

I've got a strange issue:
With Reader 9.3.1 updated directly from Adobe's website, our custom application that batch prints PDF files works correctly. However, when our Client Support team built the installer with Adobe's tools to update our users, the same custom application does not print the files. I'm not able to trap any errors when I issue the print call. It essentially has the registered application for that file type print the file. My app thinks that it prints but the printer never appears in the System Tray and never prints.
My guess is that there is some difference in the registry entries when installed from Adobe's site versus using the Adobe installer. I haven't been able to detect which entry might be causing the problem.
We're a large corporation so manually installing the 9.3.1 version at each PC is not a good option.
Any thoughts?

Thanks. I was logged in as Admin. What helped was the age old proven solution for any Windows problem, a reboot. For some reason, some process was probably holding on to the lock. Some uninstaller forgot to ask me to reboot, or perhaps I forgot to reboot. Oh well.

Hp cp1160 deskjet printer won't print from Mac OS 9

Hello,
I am running OS 9.2.2 on my Mac and I can't seem to print to my HP CP1160 inkjet printer.
It is connected using USB. My other USB devices work fine. In fact in the Apple System profiler, I can see the CP1160 printer listed as being connected and it also appears in the chooser. So it appears to be OK. Unfortunately however, it does not print.
I am using the correct driver for OS9. It is called: "hp deskjet v5.4" installed by the "OS 8-9.x-Classic installer".
Now when I go to print it does not print and the file sent to the printer appears in the print spool window for just a few seconds and then disappears.
Then this error message appears:
document "nameofdocument" failed to print on the printer "cp1160" because of an error. -28
followed by the choices: cancel job, hold job or try again
And when using the test feature of the hp inkjet utility this error message appears:
"There was a communication error, make sure the printer is connected and turned on."
Why will it not print?
What should be my next troubleshooting step?
Thank you for any suggestions,
PS It is interesting to note that this printer works fine in OS10.1 on the same computer and it also works with OS 10.4 on another computer. The computer that has this print problem has both OS 10.1 and OS 9 on it. It prints fine from OS 10.1 but not from 9. I installed the appropriate driver for OS 10.1 and it works fine and I installed the appropriate driver for OS9 and it is this OS9 driver that does not seem to want to enable the printer to print. Thank you for any suggestions.
Specs:
Computer model: 233 MHz G3 beige with ratoc USB/firewire card.
OS: 9.2.2.

I tried all of these suggestions but none were successful. I suppose my third party card (Ratoc USB/Firewire card) is just not compatible with my printer. Thats too bad. I guess the only way I can print with this printer is to boot up in OSX. That works. I wish I could print from OS9 too however. Thanks again Kenichi for your good suggestions It was a good try.
For the record, here were the extensions I disabled (and re-booted after disabling each one at a time):
Desktop Printer Spooler
Desktop Print Monitor
Print Monitor
Printing Lib
Printer Share
USB Printer Sharing
Desktop Printer Menu
color SW 1500
color SW 2500
color SW Pro
CSW 6000 series
Imagewriter
Laserwriter 300/LS
Laserwriter 8
therefore these extensions do not conflict with my cp1160 - it must be something else - perhaps my third party USB card (Ratoc USB/Firewire card).

Adobe Reader 9.1.3 Doesn't Print on Mac 10.5.8

I have just installed an HP Officejet Pro 8500 A909g printer. It prints from every program I have tested, including Safari, Pages, and TextMate. However, it does not print from Adobe Reader 9.1.3
I am running the most current version of Leopard, have run Software Update and updated everything, and have run Check for Updates in Adobe Reader (it reports that there are no updates available)
I turned on debugging through cups ( http://localhost:631 ) and get the message:
E [09/Aug/2009:09:05:12 -0700] [Job 14] pstopdffilter/pstocupsraster failed with err number 13
D [09/Aug/2009:09:05:12 -0700] Discarding unused printer-state-changed event...
E [09/Aug/2009:09:05:12 -0700] PID 669 (/usr/libexec/cups/filter/pstopdffilter) stopped with status 1!
E [09/Aug/2009:09:05:15 -0700] [Job 14] can't open `/private/var/spool/cups/tmp/4a7ef3ba9b679'.
E [09/Aug/2009:09:05:17 -0700] [Job 14] Opening Printer Connection Failed: Unable to open the printer connection. Please check your printer connections and check for printer errors.
I am connected via wireless to the router, and then wireless from the router to the printer. Again, every other program prints without problem, so it is not a connection problem
I had seen a post about problems printing with Reader that suggested opening the Preview mode, and then printing from that, but when I click the Preview button, I get the message "Preview is not supported".
My workaround (other than not using Reader!) is to click Print, then open the expanded Print Dialog (click on the little down arrow), click on Advanced..., then select "Print as image". When I do that, it prints without problem.
James Nachbar
[url deleted by host]

To clarify my previous post, I had already seen http://forums.adobe.com/message/1770581 . I mentioned in my post that I get the message "Preview not supported" when I click the Preview button from the print dialog in Adobe Reader, and thus concluded that the "Preview" workaround discussed in that thread wasn't helping me.
However, re-reading that post, they were talking about using the Mac "Preview" application to print the pdf file. Like every other application (other than Reader) I have tried, the Mac's Preview application prints just fine, and is another workaround.
The only program that doesn't print for me is Adobe Reader.
BTW, I also have an Intel chip in my MacBook Pro.
Re-installing Leopard, as suggested by one post in that thread, is not a reasonable option for this problem.
In fact, since Preview allows me to view and print .pdf's , my solution is probably just going to be not to use Adobe Reader. In fact, had I not been new to the Mac, I would have known that I didn't need Adobe Reader at all.
However, I'm glad this happened, in the sense that I use CS3 on the PC, and had considered moving to CS4 on the Mac. However, since Adobe apparently hasn't figured out how to get printing to work on a Mac from their flagship product (!), I will be sure to do a lot of testing of CS4 before considering buying the upgrade.

HP 7520 - Printer in Use - won't print from MAC

I have installed the the HP7520 on my MAC computer. I am connected wirelessly. When I attempt to print I get the message that the 'printer is in use'. I can access the printer from other computers in the house (non-Mac) and I can also print a test page from the Mac. I don't know how to solve this to get the printer to work from this computer, any help would be very much appreciated.

Hello Hiker01,
If you will use the printer on wireless router you have to ensure that the your routers bonjour specisification is on or added. Then go to add printer button and select the printer with bonjour name Please..

Deskjet D1560 Windows Network Won't Print on Mac

I have a Deskjet D1560 connected to my HP desktop computer. I am able to print just fine from there. I have shared it and am able to send jobs to the printer from the mac, but they say spooling, then printing, yet nothing prints. The printer makes noises like it is getting ready to print, then never does. I have already tried resetting the print spooler, turning the printer on an off again, and deleting and readding the printer on the mac, to no avail. In the hp printer utility on the mac, the printer is there, but red, and I can't access it.
I have:
Deskjet D1560
Macbook Pro running OSX Version 10.6.8
WRT54G Linksys router

Hello,
Thanks for the post. I've attached a link below that may assist with this issue. Good Luck!
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02205477&cc=us&dlc=en&lang=en&lc=en&product=337...
I worked for HP but my posts and replies are my own....Thank you!
*Say thanks by clicking the *Kudos!* which is on the left*
*Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.*

Konica BizHub 350 won't print from Mac OS 10.6

I need help with a Konica Bizhub 350 and my Mac OS 10.6. I have downloaded the drivers for 10.6 and 10.4 as recommended, and reinstalled the printer over and over. I get the message, "The print que says "connected to printer," but nothing prints!!! Please advise.

You could be using an IP protocol that is not compatible or enabled in the printer. That often results in print jobs not printing. So remove the current printer from Print & Fax and add again, this time selecting HP Jetdirect-Socket for the protocol.

Windows XP won't print to Mac Tiger w/Epson R200

I have Windows XP successfully networked through a router to a Mac OS X 10.4.6 with an Epson R200. I've successfully assigned the Printer to the Windows XP.
I followed these instructions
http://www.ifelix.co.uk/tech/3012.html
The XP DOES send the job to the Mac. It shows up in the Printer Jobs on the Mac but the job is Stopped.
I've tried using an installed Epson R200. I also tried using the Apple Color LaserWriter as per the above instructions.
Any Help?

Bump
No one else has ever had this problem or has an example of a working solution?

Reader 10.1.3 won't print on Mac OS 10.7.3

Similar Messages

Maybe you are looking for