Reader 9.0/9.1 problem

I have install in a window vista OS Adobe Reader 9.0, which will not initiate, error message enternal error. Downloaded version 9.1 and attempted to install got error message 1606 could not access %APPDATA%\. Attempted to uninstall 9.0 and got same messsage, Downloaded Windown Installer CleanUp Utility but could not install, same 1606 error message. Open for suggestions Thanks

Thank you - finally someone has answered the question I have asked so many times.
This means that the %APPDATA% environment variable is not set. Please see this Microsoft article how to correct the problem: http://support.microsoft.com/kb/886549/
N.B. the solution involves editing the registry. If you are unfamiliar or unsure about registry editing, leave the task to an experienced professional. Before attempting to edit the registry, always take a registry backup! This tool has proven itself for many years as an excellent registry backup: ERUNT.

Similar Messages

When I open iTunes, I receive an error that reads "iTunes has encountered a problem and needs to close. Sorry for the convenience." When I click to see the error, it reads "AppName: itunes.exe AppVer: 10.5.2.11 ModName: msvcr80.dll" Why ?

When I open iTunes, I receive an error that reads "iTunes has encountered a problem and needs to close. Sorry for the convenience." When I click to see the error, it reads "AppName: itunes.exe AppVer: 10.5.2.11 ModName: msvcr80.dll" Why ? I am overly frustrated. Please help. Not exactly sure which operating system I have. It is a dell laptop with xp.
AppName: itunes.exe AppVer: 10.5.2.11 ModName: msvcr80.dll
ModVer: 8.0.50727.6195 Offset: 00026b72
AppName: itunes.exe AppVer: 10.5.2.11 ModName: msvcr80.dll
ModVer: 8.0.50727.6195 Offset: 00026b72

Well I was able to successfully revert back to iTunes8. Here's my steps:
1. In Add/Remove Programs I deleted all Apple products (iTunes, QuickTime, Safari, Bonjour, etc.)
2. I then check C:\Program Files\ and made sure all folders were deleted (QuickTime, etc.)
3. I then ran a Registry Cleaner program to make sure all entries from Apple products were removed.
4. I then rebooted my PC
5. I then downloaded iTunes8.0.2 from here: http://www.apple.com/downloads/macosx/apple/ipod_itunes/itunes802forwindows.html
6. After it installed it said it could use my iTunes library file because it was created with a newer version. So I re-created my library by following these steps: http://support.apple.com/kb/HT1451
It took some time but iTunes is now back up and running. And I have all my playlists, etc. I haven't tried to sync anything yet. I'm just thrilled to have my iTunes back!

Time Machine not backing up. Very slow, essentially hanging. I have 10.7.5 Mac OS X Lion (11G63). I have put in all updates. I tried to put my folders into "private" in the Spotlight (b/c I read that might be the problem). Still not working.

Time Machine not backing up. Very slow, essentially hanging. I have 10.7.5 Mac OS X Lion (11G63). I have put in all updates. I tried to put my folders into "private" in the Spotlight (b/c I read that might be the problem). Still not working.
Thanks in advance for any help!

For all things Time Machine see Pondini's excellent information here...
http://pondini.org/OSX/Home.html
Start at Troubleshooting.

I uninstalled Adobe Reader X to address a problem and cannot reinstall the software.

I uninstalled Adobe Reader X to address a problem and now I am unable to reinstall the software. Ideas?

OK - you can download the standalone installed for Adobe Reader directly from the Adobe FTP site.
ftp://ftp.adobe.com/pub/adobe/reader/win/10.x/10.1.2/en_US/
Save the executable file onto your computer and then double-click on it - the installer should run as normal.
If you want to install a different language, go to this address instead:
ftp://ftp.adobe.com/pub/adobe/reader/win/10.x/10.1.2/

I've recently upgraded to Lightroom5.7.1 and now when I try to import photos a window pops up saying 'the photos can't be imported 'cos the files can't be read'. I had no problems before upgrading. I have Windows8 & can't find any 'app' which sets the typ

I've recently upgraded to Lightroom5.7.1 and now when I try to import photos a window pops up saying 'the photos can't be imported 'cos the files can't be read'. I had no problems before upgrading. I have Windows8 & can't find any 'app' which sets the type of files I can import. Any help appreciated.

Well, think about it. This is a Lightroom forum. We are here to answer questions about Lightroom and how to solve problems in Lightroom. Your permissions issue is an operating system issue, not a Lightroom issue. I didn't mean to be sarcastic. But there are plenty of Internet resources that will answer that question.
I just went to Google and typed in "change disk permissions", and there are links for the Mac as well as for Windows listed. There's no sense in me rewriting instructions that are already available.

Reader, IE8, Win7, and Oracle - Problems saving PDF

Hi there! I have an odd annoying issue. In short, my problem is that I cannot save PDF's generated by Orace in a browser window on my Windows 7 PC. My Windows XP machine does this just fine. Both are using IE8.
My work uses Oracle for a good bit of our tasks. I frequently have to save generated PDF's from the Oracle system. The work flow is like this:
1) Login to Oracle in IE8. Then open Oracle via IE8. This process opens up a Java window that houses the actual Oracle app.
2) Generate file from within Oracle. This opens another IE8 window in which I can choose the format of the file (RTF or PDF). When I click next it will generate the file...if a PDF it will normally open inside the browser window.
3) At this point on my Windows XP/IE8 machine, I can click save and a dialog box opens allowing me to choose location and name for the file. On my Windows 7/IE8 machine, when I click save, nothing happens.
If I change the settings in Reader to dissalow opening the file in the browser (forcing Reader to open), I can navigate to "Save As" and save the file. This just requires several more clicks (and to anyone that has used Oracle, you know that the last thing I need is several more clicks for a task).
I can print fine, so I can use a PDF printer to "save" the file, but again, this is more clicks.
If I navigate to a PDF on the web (I used the IRS as a test), I can save just fine, same as on my XP machine.
I've tried disabling UAC in Win7, doesn't help. I've tried adding my company's Oracle website to the trusted list, doesn't help (PDFs come up in an Unkonwn Zone no matter what I do). I tried manually enabling every item under the security settings of IE8 and it didn't help. I've tried running IE8 as an administrator, didn't help.
Thanks in advance for the help.
Message was edited by: Aegwyn11 - Fixed title

I found a decent workaround (not a true solution)...remove Adobe Reader and install PDF Xchange Viewer instead. Its free and has browser integration that actually works correctly. Looking over this forum, it seems that Adobe Reader has a number of problems with Windows 7...I would have thought that Adobe would have their act together better. I guess I was wrong.

PI 7.3 - AEX "unable to read configuration data" and login problems

Hello Friends,
after installation of AEX, i'm facing some problems.
1.I'm not able to login with any user, i created during installation wizard. So i cannot check any user in NWA -> User Administration.
2.Once more, while opening http://<host>:<port>/rep or http://<host>:<port>/dir, i get the following error message.
Can somebody help me?
I think, there is a problem with the users, which have been created during installation. How can i check this? Is there any chance?
Second, if i'm able to login, i have to import the exchange profile again. This should solve the problem. Or is this wrong?
PI (http://<host>:<port>/dir/start/index.jsp). Below is the part of the error message that is showing up. Appreciate your suggestions:
Exception class: com.sap.aii.utilxi.prop.api.PropertiesException$InitFailed
Message
Unable to read configuration data (ExchangeProfile/aii.properties)
Stacktrace
Thrown:
com.sap.aii.utilxi.prop.api.PropertiesException$InitFailed: Unable to read configuration data (ExchangeProfile/aii.properties)
at com.sap.aii.utilxi.prop.api.PropertySourceFactory.initServerMode(PropertySourceFactory.java:220)
at com.sap.aii.utilxi.prop.api.AIIProperties.initServerMode(AIIProperties.java:518)
at com.sap.aii.ib.server.applcomp.StartupServerProperties.initPropertiesForServer(StartupServerProperties.java:97)
at com.sap.aii.ibdir.server.applcomp.StartupCodeEntry.startup(StartupCodeEntry.java:151)
at com.sap.aii.ib.core.applcomp.IStartupCodeEntry.startupIfNotAlreadyDone(IStartupCodeEntry.java:43)
at com.sap.aii.ib.core.applcomp.ExplicitApplicationComponentImpl.startup(ExplicitApplicationComponentImpl.java:116)
at com.sap.aii.ib.core.applcomp.ExplicitApplicationComponents.startup(ExplicitApplicationComponents.java:438)
at com.sap.aii.ib.core.applcomp.ApplicationComponent.startup(ApplicationComponent.java:203)
Please let me know if I am not clear.
Edited by: Clarence on Feb 6, 2012 3:28 PM
Edited by: Clarence on Feb 6, 2012 3:28 PM

hi,
>>>>Second, if i'm able to login, i have to import the exchange profile again. This should solve the problem. Or is this wrong?
if you have java stack only there is no exchange profile anymore...
https://weblogs.sdn.sap.com/pub/wlg/28334
Regards,
Michal Krawczyk

HT1349 MY IPHONE 4 THAT IS ONE MONTH OLD IS SENDING MULTIPLE REPEAT TEXT MESSAGES AND EVERYONE I KNOW IS ANNOYED WITH ME, IVE READ THIS IS AN ONGOING PROBLEM, DOES ANYONE KNOW IF THAT IS TRUE OR IF THERE IS A WAY TO FIX IT? I CAN NOT SEEM TO GET AN ANSWER

My iphone 4 is about a month old ad it continues to send multiple repeat texts message to the point where I have stop sending texts because everyone is annoyed with me, is there a solution that anyone knows of? I am hearing from sprint that it is apple's issue and from apple it is a sprint issue. They said I can take it to the store but its one month old and I find it hard to beleive that they do not have an easier solutions, i dont have time to or the patience to give up my phone for three days. This can't be right correct? If anyone has founf a solution I would really appreciate some help as Im sure you can hear I am frustrated.
thank you

It is a sprint issue and other carriers have that same problem. I get multiple copies of texts from other carriers all the time to my iphone. It isn't the iphone, it is the carrier sending the text message several times because they haven't received and ack message from the recepient.

HT5628 I have OSX 10.9.1 on my iMac and want to install Windows 8.1. I've read that people are having problems with 8.1. What should I do?

I'm getting ready to partition my drive and install Windows. I've read that there are wifi and other problems with Windows 8.1. That I should use 8.0. Microsoft does not sell 8.0 anymore. They want you to buy 8.1. What should I do? Any help would be appreciated.

Read the Boot Camp Help first. Boot Camp does not yet support Windows 8.1 http://windows.microsoft.com/en-US/windows-8/system-requirements. If you insist on installing 8.1 use a virtual machine like parallels, Fusion, or VirtualBox.
http://www.apple.com/support/bootcamp/

Adobe reader XI: doule sided print problem with network printer (windows 8 pro)

Hi, I'm facing a problem with my old printer, the xerox phaser 3160n. It was connected to my notebook through network connection, and everything works well with Adobe X /Win 7 OS (including the double side print, of course) last month, I have upgraded my NB to windows 8 with clean install
clean install my printer driver for windows 8 too, and Adobe reader XI was also downloaded through official website.
However, since I was about to use double sided print in Adobe reader XI (11.00.02) it couldn't obey the order, but just print one side as usual
I have checked the "option" of my printer, and it was correctly set to "double-sided print". I have tried word 2013 to open the same pdf, and choose the same "double-sided print" and it works perfectly.
Is this problem a bug? and would it be corrected in the next update version??
(I remeber I've saw a similar issue too, with network printer, but I couldn't find it)
Thanks!!!

Hi,
Meanwhile, after insatlling the latest driver for printer from the manufacture website, restart the spooler service as a test.
Start > Run > cmd and type "net stop spooler" after that "net start spooler" or start > run > service.msc and restart it over the GUI.
Run Printer Troubleshootor under Action Center\Troubleshooting\Programs\Printer, and check if it helps.
And yes, the manufacture should have more sence about the printer, it's recommended to contact them.
Yolanda Zhu
TechNet Community Support

Adobe Reader X: There is a problem with Adobe Acrobat/Reader. (127:0)

I am getting an error when i am opening an pdf document inside an other application (Attensity Respond).
"There is a problem with Adobe Acrobat/Reader. If it is running, please. exit and try again (127:0)"
I am using Adobe Reader Version 10.0.1 installed under Citrix XenApp 6.5 Windows 2008R2.
Has anyone an idea how to fix this issue?
Thanks
Martin

I don't know what this means. All I can suggest that you try updating your old Reader version to the latest (10.1.9 or 11.0.6).

Adobe Reader X/10 - continued crash problems trying to save PDFs

Dear all,
I wonder if anyone can help me.... I have been having ongoing problems when trying to save PDF documents online while using the downloaded Adobe Reader 10 or X version. It always crashes/freezers when I press the 'save' button in the 'save as' dialogue box. I have to use end program and start all over again.
I use Windows XP (Professional, Service Pack 3) and both Mozilla Firefox 4.0.1 and IE 8 web browsers. I have followed the links suggested to prevent in future after the problem has been reported - I have unstalled and reinstalled Reader a few times now, as well as checked that I have been using the most up to date version of Reader 10 or X. Then reopened everything again thinking it's solved and then crash (ARGH!). Has anyone else had similar issues?
This is most frustrating to say the least, not withstanding the time delays affecting work outputs when the system crashes on the 'save as' dialogue box (after pressing save). I have lost faith in Adobe now ... I used to consider the free download of Reader a great asset, now it is a true annoyance and may or may not work entirely.
Any help or advice would be great, even alternative PDF software.
Many thanks in advance
Ruth

The response from 370H55V is correct in theory and in actual fact was very close to the solution, but the response was more cryptic than helpful. I first encountered this yesterday after upgrading users on a Terminal Server from Reader v8 to v9. My first instinct was to upgrade to v10, which I did, but the problem still existed, so I rolled back to v8 and the issue was resolved. Unfortunately however this was not a solution and it was a requirement that we upgraded to at least v9. The error was as described that in IE 8 when a PDF file was opened inside the browser(or embedded as some might say), and you press SAVE (or even sometimes print) within the adobe reader toolbar, IE would flicker and crash on the page and then recover the page, saying this page has been recovered, but no saving would happen. This would happen if protection was turned off in Adobe Reader, and if it was on (default), then pressing SAVE would just make IE freeze as previously reported.
So to understand what was happening, I ran FILEMON and REGMON by SYSINTERNALS. Regmon showed nothing of significance. Filemon showed a lot more. It was getting an access denied error on c:\windows\system32\shell32.dll. There was no reason for this however because the permissions on this file allow all users to read and execute. But then I remembered what shell32.dll does. It brings up the SAVE AS dialog box that allows you select the path of where to save the file – essentially this is calling the shell of explorer.exe.
So this is actually the cause of the crash. When Adobe Reader makes the call to the SAVE AS dialog box – CRASH!!!!! Why???
Well it’s quite simple. The default location that the SAVE AS dialog box starts in is MY Documents and this is where to start looking for the source of the error. To find out were “my documents” is for your session, open REGEDIT and go to:
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders
Look for the key: PERSONAL and in it is a REG_SZ containing the path to “my documents” for the current user. This is generally something like C:\documents and settings\<username>\My Documents on Windows XP/2003 and something like C:\Users\<username>\Documents on Win7/ 2008.
Now in our case the setting for this key was U:\ which was a mapped network drive to the path: \\server\username\mydocs. U:\ did exist and the user had full permission to it. So I changed the path on the personal key to C:\documents and settings\<username>\My Documents – the default setting. I went back to IE, opened a PDF document from a website, viewed the file and then pressed SAVE on the adobe toolbar. BINGO BABY!!!! Worked perfectly.
But again this was not a solution because in a network, you need your users to have their “my documents” in their own home drive, which is generally located on a remote share on a server. So I put the PERSONAL setting in the registry back to U:\ and crash back to square one. I then put the path of the U:\ in the key instead of just U: drive, so PERSONAL now had a REG_SZ value of \\server\username\mydocs. Went out to IE again, launched a PDF, pressed SAVE. BINGO BABY!! It worked. So clearly this was a UNC Path resolution issue or something similar, but why did it only happen from v9 of Adobe Reader and whose fault is it – Microsoft or Adobe. Well I suspect both. I suspect that Adobe maybe making a weak Shell call in their code which doesn’t resolve the path properly, and a possible bug in the MS Shell call may be adding to this issue.
Anyway, I did some further testing for some fun. I took permissions away from the user to their “My documents” folder and was also able to replicate the same crash. I set the PERSONAL registry key to a folder that didn’t exist and same crash. So basically if the SAVE AS shell call can’t resolve or access the path as set in the PERSONAL key the you will get this crash.
The way I solved it for the network users, was to set the registry key for PERSONAL to \\server\username\mydocs via Group Policy, also a logon script may also work. Additionally you could use Folder Redirection in Group Policy to set the path for MY Documents on a per user basis. This also was tested and work.
For non-network users check the PERSONAL key and get the path and then find that path and check permissions etc. Replace it with the default location or even point it to a path that you know exists and has full access.
As a final tip, also look at the registry Key:
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders
And find the PERSONAL path. It will be something like %USERPROFILE%\my documents in XP/2003 and %USERPROFILE%\Documents in Win7/2008. This is the default location and if the PERSONAL KEY does not exist in HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders then windows reverts back to the User Shell Folders key to get the path. It is a good idea to check that path in this area as well.
Hope this helps.

Adobe Reader X fast web view problem

Hi,
When I try to open a PDF with several pages from the web using Adobe Reader X, fast web view function seems not working while I could only view it after download of the whole file completed. Checked and confirmed that "Allow fast web view" selected in the Reader, as well as the PDF file being tested support such function. Here's my OS and software environment:
- Windows 7 Pro 64-bit with SP1
- Internet Explorer v8.0.7601.17514
- Adobe Reader X v10.0.1
I tried several scenario as below:
- Disable "Display PDF in browser", no improvement
- Uninstall Reader X and install Reader 9, test on the same PDF and fast web view working properly
- Uninstall Reader 9 and install Reader X again, same problem happen again
- Install Reader X on a freshly installed Windows XP with SP3, same problem appears
Does anyone experience the same issue? Or any ideas \ solutions? Many thanks.
Regards,
Maguyver F.

Hi
Security Method: No Security
Printing: Allowed
Document Assembly: Not Allowed
Content Copying: Allowed
Content Copying for Accessibility: Allowed
Page Extraction: Not Allowed <-- Could this be the problem
Commenting: Not Allowed
Filling of form fields: Allowed
Signing: Allowed
Creation of template pages: Not Allowed
Thanks for the interest
Rudi

Simple Channel Read and File I/O Problem

Hello
I am having a simple problem with reading in two channels from a usb-6259. I have 2 channels, reading in voltages, and I am wanting to read them in at 400K Hz. I have used the DAQ assistant and the Write To Measurement File VI. It is just a direct connection between the two. I have the DAQ assist set up for taking in N Samples, which is set to 8M because I want to take in 20 seconds worth of data at 400K Hz. Now the problem lies with the fact that I am getting a Out of Memory error. This pretty much confuses me because the file that I will get is 220MB (I know this because I put a wait and got none continuous data for a total of 20 seconds worth of data at 400K Hz), and I have 2 GB of RAM, in whic i usually have 1.3GB free when I start the simulation. So, now on to my actual question. How is this system running out of memory? How else can I program this to make this work? Any feedback on this would be great. Thank you.
Michael B
Labview 8.5

Hello Michael B,
The DAQ assistant creates a lot of over head and this may be the reason why you are running out of memory. If you keep the Task Manager open while you are running the task, you'll be able to see that the memory keeps being used up by the data acquisition process. I would suggest not using the DAQ assistant and to use the lower level DAQmx VIs.
A good place to start would be Help -> Find Examples. Within Find Examples select Hardware Input and Output -> DAQmx -> Analog Measurements -> Voltage -> Acq&Graph Voltage Int Clk.vi. Go to the Block Diagram of the VI and change the "time out" to a much larger value. You can select two channels at the same time by using a comma (eg: Dev2/ai0, Dev2/ai1). Hope this helps.

If I install the update to Adobe Reader 10, will that cause problems with Acrobat Pro 9?

Firefox (version 15.0.1) is telling me I need to install an update to Adobe Acrobat 9.4 in order to view pdf files in my browser. I use Acrobat Pro 9. The update is actually Adobe Reader 10, and I am wondering if I install this, will it cause problems with my version of Acrobat Pro?
Because I am not sure if this is so, I have temporarily disabled the plug-in and now pdf files download automatically rather than display in my browser. I would prefer they open in my browser but do not want to upgrade to Acrobat X.
My OS is Windows Vista. I did not include the "troubleshooting information" file because I'm not sure what specific info is being requested.
Thanks for any help.

Hi WMdotcom
did you try to view pdf with your acrobat pro 9 ?
see
[https://support.mozilla.org/en-US/kb/change-firefox-behavior-when-open-file Change what Firefox does when you click on or download a file]
[https://support.mozilla.org/en-US/kb/set-how-firefox-handles-different-file-types
Set how Firefox handles different types of files]
thank you

Acrobat Reader Versions and saveAs, exportXFAdata Problems

We use generate Forms with Reader Extension Save enabled.
The forms are then opened within Acrobat Reader. In the onClose Event a Script called "saveXMLData" is called. This script is install in the javascript folder of the reader installation.
The script :
var saveXMLData = app.trustedFunction(function(doc)
     app.beginPriv();
     doc.saveAs({cPath:"/c/windows/temp/savedForm.pdf",
          bCopy: true,
          bPromptToOverwrite: false });
     doc.exportXFAData({
          cPath:"/c/windows/temp/savedForm.xml",
          bXDP:false
     app.endPriv();
     return;
Using Acrobat Reader 7, eveything worked fine.
Using Acrobat Reader 9 "saveAs" crashes the Application after the document is saved and the filled in Data is not saved.
Without the saveAs function, at least the export File is generate but the data that where filled in are missing.
Using Acrobat Reader X "saveAs" crashes the Application as well. Leavin out the saveAs function, the export File is generated as expected. Thus the filled in data values are saved.
Using Acrobat X Pro everything works as with Acrobat Reader 7.
Our Problem is that the customer uses Acrobat Reader 9. Are there expected incompatibilities with the different versions. Does anybody know any workarounds, settings?
By the way disabling extended security does not help.
Thanks
Max

It cannot be a problem of the installation, because at least Windows 7
was a fresh install with nothing but Reader additionally installed.
By the way, what do you mean by "risky", I followed straight the
documentation from Adobe, where one is allowed to place function calls
requiring a privileged context.
Have you any better idea where to place the call to save? It must be
called automatically, when the User closes the window, no additional
interaction is possible.
One other thing is the call to exportXFAData, have you any idea why
there is a difference in behavior between reader version 7 / 10 and 9?
I wrote that in version 9 the user entered data is missing.
Am Donnerstag, den 21.07.2011, 05:53 -0600 schrieb try67:
No, it doesn't work.
Sorry, I don't have any ideas except for trying to repair the installation
of Reader.
However, placing code in the WillClose event is considered risky and should
be avoided if there are alternatives available.
>

Reader 9.0/9.1 problem

Similar Messages

Maybe you are looking for