Reader 9.0 consumes 25% CPU and freezes...open Reader first?

I was having problems double clicking on a document and scrolling through it. After a few page down clicks, it would consume 25% CPU and lock up. This is on a quad core with 6gb memory running 64 bit Vista. What I discovered was if I instead opened up Reader first, chose Open and browsed to the document, it worked fine. Does anyone know why this might occur? I'm assuming it has to do with how Reader is launched.
I understand how file type associations and things worked under XP, but I'm having difficulty finding the same thing in Vista to see if there are different parameters being used.
The same document worked fine on my 4 year old XP machine with Reader 7.

. Uninstalling Reader version 9
2. Installing Reader version 8.1 from the abobe.com website
3. I then had to uninstall via control panel add remove programs the adobe.com program, and I also uninstalled the Adobe AIR program.
4. I then checked in my Add Remove programs list and Adobe Reader 9 is still listed, I uninstall it again (why I don't know).
5. I then view a PDF file outside of Internet Explorer and I have to accept the license agreement in a popup window to get Reader 8 working properly.
6. I then go to a web page that links to a PDF file and finally I can view PDfs in the browser again.
We have around 30 PCs in our department with Adobe Reader 9 and some of them work in a browser and some of them do not, so there appears to be a conflict of some sort.
For info, I have Acrobat Professional 8.1 on my PC also.

Similar Messages

  • Adobe Reader 11.0.03.37 hangs and freezes opening PDF documents

    When opening PDF documents with Adobe Reader 11.0.03.37, it hangs and freezes for a few minutes.  Is anyone else experiencing this and is there a fix or work around?
    We have Windows 7 Professional 64-bit operating systems.  It takes a moment for the Adobe Reader to unfreeze itself but will eventually.
    Thanks!

    Found a fix for my problem.  It wasn't the Protected Mode issue after all.  The fix is to disable In Product Messaging.
    Here is the fix for the problem.  Now maybe Adobe can address this issue in the future release or patch/update.
    Try it on yours and see if it doesn't fix it also.
    The following below link provides the information I am about to share with you.
    But open Adobe Acrobat Reader without opening a PDF file. So just open Adobe Reader application by itself.
    1. Click on EDIT
    2. Click on PREFERENCES
    3. Click on GENERAL Category
    4. UNCHECK "Show me messages when I launch Reader"
    5. CHECK "Don't show messages while viewing a document"
    This should fix your problem as it fixed mine. See the link below for more information. Looks like I will be doing a regedit script for our network users to get rid of this problem. UGGGHHH!!!!!!
    Hope this helps!
    http://www.adobe.com/devnet-docs/acrobatetk/tools/PrefRef/Windows/IPM.html?zoom_highlight= IPM

  • After installing Adobe Reader 8.1.2 system restarts and freezes

    After installing Adobe Reader 8.1.2 system restarts and freezes (hangs, locks up)
    I have Windows XP SP2, plenty of spare disk space and Adobe Reader 8.1.1.
    The 8.1.2 Reader appeared to install OK and asked for the system to be restarted. When I accepted this it shut down and rebooted as expected,
    but just before it was fully restarted it froze and I could do nothing.
    I pressed the power switch and tried again but the same thing happened again.
    To get back to a usable system I had to boot in safe mode and go back to a restore point.
    I don't know if this is relevent but it stopped just before Nortom firewall usually starts.
    I am keen to install the new version because of the security fixes.
    Can anyone help?
    Thanks in anticipation

    The link to the Reader forum is at the top of this forum.

  • TS4208 Apple Mail client no longer marks my mail as read on all my iOS devices. If I read a email on my iPhone and later open Mail on my iPad, the iPad still shows the email as unread.This changed recently, perhaps after iOS7 upgrade. Did I miss a setting

    Apple Mail client no longer marks my mail as read on all my iOS devices. If I read a email on my iPhone and later open Mail on my iPad, the iPad still shows the email as unread.This changed recently, perhaps after iOS7 upgrade. Did I miss a setting? All mail account are IMA. iCloud is set to push, business mail is set to fetch every 15 minutes.

    Read thier own support document on the subject then
    http://support.apple.com/kb/TS1795
    This document was written as an answer to all those who complained about it as paying MobileMe users
    They ignored us then and when MobileMe became iCloud they ignored us again, and just carried on with a system that will not update the e-mail read status across all devices
    That's how it works,   and like you 1000's of loyal Apple users cant believe it either but there you go

  • [SOLVED] high CPU and freezing issues

    Greetings,
    While I don't claim to be an expert at these things, I'm no newbie either... at least as far as computers go. I admit there are still many things I need to learn about linux, but that's all part of the fun. Anyways on to the point of this topic.
    After the power supply on my main pc died and shorted out the mother board with it, I have been forced to use an older computer. It is a computer that I know works as it was used by my wife as a desktop when she didn't feel like using her laptop. Odd.. I know, but hey, whatever she wants she gets .
    It is an older pc, a compaq presario 5423. It is running an intel p4 1.6 gz processor and has an nvidia geforce 2 mx agp video card. Ever since the last xorg update that refuses to work with nvidia-96xx, I've been using the nv driver. I have tried briefly the other one (nouvelo or however it's spelled) and while it worked it seemed to slow my computer down and produce some odd effects like screen freezes and whatnot. It was running two 256 MB ram sticks, I replaced them with the two 512's from my main (dead) pc. I have the two hd's from my main pc on it, properly set up (I basically resinstalled arch so that I was sure it was done right, and just because I love the arch linux installation process, it is awesome IMO). I've been running this PC since.. October I believe... whenever it was that I submitted that e17 screenshot... I think that was October.
    Here is the issue I am having. The CPU loves to max out.. ie.. reach 100% almost instantly. Open up a browser *poof* 100%, making me wait a moment before I can do anything else. Open up a few tabs.. *poof* 100%... and frequent freezes.  It doesn't seem to matter what I am running, doing, using... it always happens. This happens in pekwm, fluxbox, openbox, e17, wmaker, firebox, twindy, fvwm, even the almighty awesome. Yes, those are all wm's I've tried. Forget trying to run KDE (I did, it loads... but that's about it. I had to hard restart because of total freeze-up). I've tried all kinds of browsers, firefox, chrome, iron, midori, auroa, konq... Midori hates me, the others are too heavy... only Chrome and Iron (both basically the same) work, but still experience the freezes and the like. Uzbl laughed at me as even trying to start it caused a massive CPU spike. I know, hard to believe.. which leaves me thinking there is a serious problem.
    MPD spikes the CPU by 20% easily each song change. Googles even more so. Forget the heavyweights like amarok and exile. Pidgin spikes it when loading initially but evens out. Terminal spikes it only when compiling, updating, or building from AUR... or installing a package with pacman.
    Here's the thing, when my wife used it before, using LXDE with Open Box and only a total of 512 MB she never experienced this. This box came with Windows XP which ran fine.. somewhat slow but fine. So this all leaves me thinking, something is just wrong.  I am wondering if maybe bad RAM? Maybe the thing is just trying to give up the ghost? Before going and pulling out RAM though I want to see what you guys think.
    Here's what HTOP has to say...
    CPU(while writing this post): 36.8% (in pekwm!)
    Mem: 187/1009 MB (all bars are lite up...)
    Swp: 1/2863MB (already tapping into swap?)
    Tasks: 128 total, 1 running
    Load average: 0.26 0.08 0.06
    So yeah, I researched online.. this processor is supposed to be able to even run KDE fine. So something has to be off. Any ideas?
    Last edited by mythus (2009-11-20 12:13:53)

    Well right before I changed drivers back to nvidia-96xx, I did a pacman -Syu check.. there was a new xorg update waiting for me. So I updated and switched back to nvidia-96xx driver.
    Still having the fun CPU issues so this must not be an nv driver thing itself.
    free -m provides the following...
    total       used       free     shared    buffers     cached
    Mem:          1009        606        403          0         60        387
    -/+ buffers/cache:        158        851
    Swap:         2863          0       2863
    Therefore it would seem that memory issue is not the problem.
    Watching the cpu spike just because I type is very unnerving. Heck just running htop did a spike. Poor old computer... Just for S&G I tried once again to load kde. Neopunk killed it with it's massive cpu usage + x trying to match it. What can I say.. X was jealousy, there was no way X was going to let neopunk use more CPU than it.
    Ah.. so nerve racking. I've been working on this for almost two months now. I'll look and she what distros I got lieing around.. been awhile since I burned one and not really wanting too.. had no desire since arch is what I want. But I suppose I do need to compare to see if it is something else like X causing this.
    I'll do that in a bit.. I'll wait a moment incase anyone else has another suggestion. Give me time to get off my butt and do some honey-do's for my wife.

  • IMovie '11 hogs CPU and freezes

    I've been importing a few video files in iMovie (from local hard disk, not HD) and it has been taking over 1hr each time... for about 1hr movies.
    During each, activity monitor will show that iMovie is taking about 150% of CPU usage... never less than 95%, and I even saw a peak at over 200% (how can something go over 100% is already beyong me, mathematically... but 200%?!)
    I should be glad that iMovie is using all the power possible, but I don't get the results. It's incredibly slow, and everything else is freezing. I have trouble using the computer. Even typing in an email or switching between screens is slow... when it happens. I may not be using the most powerful machine there is, but I doubt it's normal behavior.
    I have a 3.2GHz processor and 4G of RAM.
    I tried closing all other programs (even though activity monitor showed they were not using much CPU), but it didn't change anything.
    I noticed today that this huge CPU usage and the worst freeze happens for over 40min while the progression bar of the import barely changed and stuck at about 2-3%... and then the iMovie icon starts jumping and from that point the computer goes back to acting normal and the import finishes in less than 5min.
    It's like there is a bug with the process at the beginning of the import... not the import process itself.
    Anyone has any idea of what's happening?
    Thanks
    (When I export small projects -just movie cuts with no effects- it uses a lot of CPU too and slows down the whole computer... but not in as bad a way, and the process clearly goes on normally... and working in iMovie to create projects is usually OK.)

    That is utter nonsense about 200% explanation!  Tools such as TOP in the CLI are unix based tools, and were originally designed for computers that had 1 CPU.  The world has evolved A LOT since 1970s.  Unfortunately a lot of the geeks who grew up with that technology are as thick headed as religious nuts who opressed women in Saudi Arabia and won't even let them drive!  They insist that things should function ONLY THEIR WAY and anything else is nonsense.  It is absolutely ridiculous for top to report more than 100% for the CPU utilization even on multi-core machines!  When it says 200% CPU Utilization it means that the operating system is over utilizing the CPU, which is impossible, mathematicaly and realistically.  The solution is really simple.  A few code changes to TOP and it can report 100% for any number of cores or CPUs.  But the unix zealots that are responsible for coding things don't want to make these changes, they are stuck in 1970s and refuse to move.  We need coders who are not afraid to step up and make the real changes needed.
    Try this.  Open up iMovie, close any open projects, unhighlight any events that might be highlighted so no clips are shown in the clip viewer nor the preview box.  Technically speaking iMovie is doing nothing and shouldn't take up more than 1% of the CPU.  Now if you run TOP, it will show iMovie using around 90% of the CPU.  How the heck is that good design?  It uses 100% of the CPU when it's doing nothing!!!  Imagine if iTunes used 100% CPU when it was paused?!?!!?  But iTunes is good, it uses only 1% of the CPU while in pause (which I think is still far too much CPU usage since it's doing absolutely nothing, too!).. iMovie is terribly programmed and has serious user interface issues.  Like for example.  The buttons in the middle for making a clip a favourite, or a star, etc... those buttons are huge and are ALWAYS there.. Even when a clip is not highlighted and when you are editing the project timeline and the buttons are not needed.  So much iMovie 11 functionality is ********!!  I am shocked that a company as creative as Apple can put out such a bad product!!!  But it's the best proudct of it's kind, so we should be thankful!
    Here look at this screenshot.. iMovie taking up 100% of the CPU while doing absolutely nothing!

  • Weblogic cluster consumes 100% CPU and bringing server to its knees.

    I have BEA Weblogic 10.3.1 clustering as part of FMW 11g clustering. This is two node cluster on "Oracle VM" running OEL 4.0 with 4GB Memory and 4GB swap. Install seems to go with little difficulties like 100%CPU for short period but during the configuration always the Java thread consumes 100%.
    Now I am at a point where shared drive is created (Chapter 5.20 of EDG) for HA FileAdapter and Persistence store. Hitting same 100% CPU problem. Looks like thread locking situation.
    ^-- Holding lock: java.io.InputStreamReader@6215c5d[thin lock]
    ^-- Holding lock: java.io.InputStreamReader@6215c5d[thin lock]
    Also noticed the SWAP space is never being used though it has 4GB swap space. It brings the VM to its knees. Thanks in advance for any response.
    Here is the error stack
    ========================
    <Feb 4, 2010 8:23:56 AM EST> <Error> <WebLogicServer> <BEA-000337>
    <[STUCK] ExecuteThread: '1' for queue:
    'weblogic.kernel.Default (self-tuning)' has been busy for "346" seconds working on the request
    "weblogic.kernel.WorkManagerWrapper$1@62171ee", which is more than the configured time (StuckThreadMaxTime) of "300" seconds.
    Stack trace: Thread-22 "[STUCK] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'
    " <alive, in native, suspended, priority=1, DAEMON>
    jrockit.net.SocketNativeIO.readBytesPinned(SocketNativeIO.java:???)
    jrockit.net.SocketNativeIO.socketRead(SocketNativeIO.java:31)
    java.net.SocketInputStream.socketRead0(SocketInputStream.java:???)
    java.net.SocketInputStream.read(SocketInputStream.java:107)
    weblogic.utils.io.ChunkedInputStream.read(ChunkedInputStream.java:149)
    java.io.InputStream.read(InputStream.java:85)
    com.certicom.tls.record.ReadHandler.readFragment(Unknown Source)
    com.certicom.tls.record.ReadHandler.readRecord(Unknown Source)
    com.certicom.tls.record.ReadHandler.read(Unknown Source)
    ^-- Holding lock: com.certicom.tls.record.ReadHandler@6254fe1[thin lock]
    com.certicom.io.InputSSLIOStreamWrapper.read(Unknown Source)
    sun.nio.cs.StreamDecoder.readBytes(StreamDecoder.java:250)
    sun.nio.cs.StreamDecoder.implRead(StreamDecoder.java:289)
    sun.nio.cs.StreamDecoder.read(StreamDecoder.java:125)
    ^-- Holding lock: java.io.InputStreamReader@6215c5d[thin lock]
    java.io.InputStreamReader.read(InputStreamReader.java:167)
    java.io.BufferedReader.fill(BufferedReader.java:105)
    java.io.BufferedReader.readLine(BufferedReader.java:288)
    ^-- Holding lock: java.io.InputStreamReader@6215c5d[thin lock]
    java.io.BufferedReader.readLine(BufferedReader.java:362)
    weblogic.nodemanager.client.NMServerClient.checkResponse(NMServerClient.java:286)
    weblogic.nodemanager.client.NMServerClient.checkResponse(NMServerClient.java:311)
    weblogic.nodemanager.client.NMServerClient.start(NMServerClient.java:90)
    ^-- Holding lock: weblogic.nodemanager.client.SSLClient@62164a2[thin lock]
    weblogic.nodemanager.mbean.StartRequest.start(StartRequest.java:75)
    weblogic.nodemanager.mbean.StartRequest.execute(StartRequest.java:45)
    weblogic.kernel.WorkManagerWrapper$1.run(WorkManagerWrapper.java:63)
    weblogic.work.ExecuteThread.execute(ExecuteThread.java:198)
    weblogic.work.ExecuteThread.run(ExecuteThread.java:165)
    }

    Few things that u can try first off
    1. Turn off Native IO
    2 Use this flag
    -DUseSunHttpHandler=true
    3. This stack seems to suggest communication wid NM
    weblogic.nodemanager.client.NMServerClient.checkResponse(NMServerClient.java:286)
    weblogic.nodemanager.client.NMServerClient.checkResponse(NMServerClient.java:311)
    Can you stop ur Node Manger and see if it helps..
    If these doesnt help, contact Oracle Support..

  • Premiere CS5 consuming all memory and freezing up

    I spent a couple of days farming around 2000 images into a Premiere project on  a Mac Pro, Premiere CS 5.0.0 and when I opened it this morning I could see from Activity Monitor that it very quickly consumed 12gb of memory, leaving a figure between 17-24Mb handling the system, therefore freezing the entire system and unable to do anything other than watch the beachball or Force Quit Premiere. I'd only pulled a handful of images into the timeline, so it wasn't a heavy project. Just linked to a lot of hi-res files. But why would they eat up all the RAM when I wasn't accessing or using them, they were just sat there in the project window. I have plenty disk space for scratch and running Mac OS 10.7.1.
    I've had to just bail on Premiere and take it over to Final Cut, but still curious to know why this happened and if I might be able to return the project to Premiere at some stage? I've since ran the 5.0.4 update in the background and it still eats up the memory and still freezes up, even crashing the first time I opened it after update.
    Any ideas?

    My experience using stills with FCP7 is far worse than with Pr.  Crash City.  Very painful.  Esp. with JPEGs.
    I've seen issues with stills that are very large, scaled down in a sequence.  From what you describe, it sounds like the stills are being loaded into RAM, leaving nothing for other operations.  If this is so, you could try scaling down your images, perhaps by automating the process in Photoshop.
    I don't know if it's normal to load images in the project (and not in a sequence) into RAM.  That doesn't seem right.  Another cause for the beachball could be corrupt source images.  You could determine this by adding a few stills at a time, and waiting for the axe to fall.
    I never used Pr 5.0.x, other than playing around.  I didn't think it was ready for professional use until 5.5, so my experience.  Maybe somebody else with experience on that version has more helpful info.
    I have done a couple of "slide show" style projects in Pr, and other than suffering the occasional corrupt image, it's been pretty painless, and far better than my experience trying the same thing in FCP.
    Good luck.

  • Bug report: Calendar on iOS 5 Notification screen consumes constant CPU and decreases battery life

    After upgrading an iPod Touch 3 and 4 to iOS 5 and customizing the notification screen to include the Calendar (synced to an Exchange account), the battery life of both devices seems significantly worse. Removing Calendar from Notifications returns things to normal. I suspect a CPU issue because of the following observed behavior: when the Notification screen is visible, the calendar items are observed to be re-ordering themselves near-constantly (the first item keeps getting added and removed indefinitely) and the smooth scrolling of the stocks notification at the top of the screen is extremely slow and stuttery. Removing Calendar restores the scrolling to normal; adding it back leads to the slow/stutter behavior.
    I don't know if this is contributing to the overall battery problems with the iPhone 4S, but it definitely seems to be an issue for upgraded iPod Touches.
    I hope this is helpful.

    Similar issue on a 3GS with iOS5. I found that this issue was related to an Exchange event that had been cancelled.  Removing the event stabilized the notifications screen.  Waiting to see if it improves the abominable battery life - I am recharging twice a day.

  • Excessive CPU and automatic opening windows.

    The machine is a dell laptop with Windows 8 installed.  My installation of Acrobat Pro 11 has started doing something that is driving me batty.  Upon starting the pc Acrobat will open four (4) windows in the background and each of the windows consumes 24% of the CPU resources.  How do I prevent this behavior.  It makes it impossible to use the machine until task manager is used to terminate the process.

    Have you tried a repair of Acrobat? Did you do the updates? Both of these may help, particularly if you are running a 64-bit system.

  • Opening applcations and windows, open behind first application

    Whenever i open an applicaton or new window in a browser, the application opens up behind another application. E.g. Itunes is open, i open firefox and it is stuck behind Itunes, i then have to drag Itunes to the other side of the screen to access Firefox. Is there any way to change this? It has only started happening out of the blue. Also, any drop down menus will not drop down and their options can only be selected once you click on it and navigate using the up/down etc arrow keys.
    Any suggestions?
    Thanks
    Macbook Pro Mac OS X (10.4.9)
    Mcbook Pro Mac OS X (10.4.9)

    Try deleting the file User/Library/Preferences/com.apple.finder.plist. Then restart.

  • G50-70: empty DVD-drive clicking and freezing other drives for about 30 seconds all the time

    Hello board. Big problem. Seem to be the only one having this after searching the board:
    Brand new G50-70: When using OS from the SSD or using OS from the SSD and doing things with a USB-drive, the empty internal DVD-drive making clicking sound and sometimes freezing SSD read/write operation for about 30 seconds but all the time freezing USB-storage read/write operation for about 30 seconds.
    When freezing there's always clicking. But when clicking there's not always freezing except when using USB-storage.
    OS is Win81-64.
    An example scenario: connect USB stick, open terminal, type diskpart, dvd-drive clicks and freezes opening of diskpart for about 30 seconds, then the same may or may not happen when entering commands like clear the stick and format the stick.
    Any clues, why I have this issue? Thank you very much for reading.
    Solved!
    Go to Solution.

    hi georg43,
    it's possible that there's a software running on startup that's accessing the ODD when the machine is being used (especially if the ODD LED blinks when it's being accessed)..
    To check, you can perform a clean boot to temporarily disable apps & services running on startup. If the machine functions properly on a clean boot, you will need to enable the startup services/programs that you have disabled in groups of two or three (trial and error) to find the culprit. You can start by enabling the lenovo services and apps first followed by the Intel ones and observe.
    In addition, you can also try to disable the DVD-drive under device manager and observe.
    - Link to picture
    Regards
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • BT NetProtect intermitantly consuming 100% CPU

    Hi, I have Infinity install and all is working fine, I installed the BT NetProtect secuity software and find that every so often it suddeny consumes 100% cpu and my PC slows to halt for about 1 or 2 seconds. This happens randomly through the day sometime 20 times over an hour, sometime once every 4 or 5 hours.
    At first I have disabled various functions such as the rteal time scanning etc but it still causing a problem. Uninstall the software and the problem is resolved - re-install and problem back again.
    Watch the Performance monitor under the Task Manager and you can see the CPU max out when the problem is experienced.
    Any one else with this problem and any ideas for a solution.
    All help greatly received.
    Steven

    Without more detailed info I wouldn't like to guess on why it's using 100% cpu, sone older McAffee products that I have used have been pretty resource hungry but 100% dosen't sound right at all! Although I have never used it myself there are many good free alternatives.
    I have tried many AV solutions and Firewalls on my Windows Machines over the years inc BitDeffender, Avast, NOD32, Avira, AVG, ZoneAlarm, ClamAV.
    Until recently I was running Agnitums Outpost Pro firewall and Eset NOD32 antivirus. Both of which have been very good, NOD is a nice lightweight AV but it's not free.
    Recently I switched to Comodo Internet Scurity Pro which is a free security suite containing comodo's excellent firewall which always rates highly firewall tests, and their equaly impresive AV system if interested you can download it here:-
    comodo.com/home/download/download.php?prod=cis
    Choose the free version its identical to the paid version but without GeekBuddy.
    Also take a look at Avast Free or AVG free.
    If all else fails try Linux

  • 2012 MBP 15" crashing and freezing

    I just purchased my macbook pro about a week and a half ago. I've already had a couple of crashes and freezes. At first, i thought it might have been the google chrome I was using. I deleted chrome about 5 days ago and it still has been freezing.
    Is anyone else having this problem? Is there anything I can do to fix it? Or, should I just bring this in?

    I just purchased my macbook pro about a week and a half ago. I've already had a couple of crashes and freezes. At first, i thought it might have been the google chrome I was using. I deleted chrome about 5 days ago and it still has been freezing.
    Is anyone else having this problem? Is there anything I can do to fix it? Or, should I just bring this in?

  • When I open an e-mail, I get 2 read panes. One in the middle of the in box and the normal reader pane. It blocks part of the in box and is too small to read

    In the last 2 weeks, I get a second reader pane for my e-mail. It is between the in box and the normal reader pane. It is small and I cannot read the message. I want to get rid of it. I went to Microsoft explorer and had no problem like this. Please help!
    Thanks,
    LeVoy

    Acrobat Support

Maybe you are looking for

  • GRC CUP - How to change SNC Name to lower case during user creation.

    Hi All, We are using GRC 5.3. CUP automatically creates user in R3 but SNC p:username'@'DOMAIN.COM is in upper case. 1. During automated user creation. 2. How change default DOMAIN.COM to lower case "domain.com" Currently we have to manually change i

  • How can I use single source images in text?

    I'm using RoboHelp HTML 11, and I want to use single source images of icons in text, so that I have the ability to update the source image, as needed, and all instances of the image are updated automatically. The look is as follows: I've tried snippe

  • Having problem with downloading the window driver

    Hi i have Macbook. i have OS X 10.6.7. I installed Window XP using bootcamp. only problem is that i dont have the original disk when i bought the Macbook. is there any other way to download the driver without the original CD? Thank you. (and for some

  • Wanting to upgrade from OS X 10.3.9 to Mac OS X 10.4.6

    My question is - Does Mac OS X 10.4.6 still support/run OS 9 programs?

  • Changing on the go play lists on ipod

    I currently have three on the go play lists on my ipod. I would like to delete them but can't find how to anywhere. I have successfully remove them from my i tunes. The users manual is not very specific on this topic. Please help. Thanks.