Reader 9 Print dialog shows garbage and cannot print

Hi there,
I have a problem when opening the print dialog box from a VB application. The dialog box is being scrambled.
Following symptoms:
- all select boxes are empty
- the preview area is empty
- several brochure options are shown in front of the page settings.
And - the most important problem: I cannot print.
When I click on [Print] the Reader hangs up.
The same application works fine with Reader 7 and 8.
Any help would be appreciated.
Thanks
Hyper

I installed Adobe Reader 9 and am unable to print. All I get are blank pages. It is not my printer as I can print everything else with the exception of pdfs. It seems to jam my printer - strange. Any suggestions? I can view the files but not print.

Similar Messages

  • Why do I keep getting an error message that reads "The URL is not valid and cannot be loaded."

    Whenever I click on a link that opens a new tab using "about:tab", an error pops up. The error box is titled "Alert" and the message reads "The URL is not valid and cannot be loaded."
    However, once I click OK, the page loads just fine. At first, I thought it might be one of my add-ons (Iuse a bunch), but it still occurs after restarting in Safe Mode. Any thoughts?
    I can even create the problem without clicking on a link inside a page if I simply type about:tab in the address bar.
    I am using Firefox 12.0

    Wow! I actually solved this on my own. I didn't find any thread that helped, but after reading a few, I figured poking around in about.config would help... and it did!
    Here is how I solved the problem:
    # Typed '''about:config''' in address bar.
    # When I got to the warning about voiding the warranty, clicked '''I'll be careful, I promise!'''
    # I found the setting entitled '''browser.newtabl.url''' (use the '''Search:''' box).
    # I double-clicked on the entry entitled '''browser.newtabl.url''' and deleted the info in the value portion.
    # Clicked '''OK'''.
    # Closed the tab.
    # Restarted Firefox and problem was solved.

  • I uninstalled Adobe Reader X to address a problem and cannot reinstall the software.

    I uninstalled Adobe Reader X to address a problem and now I am unable to reinstall the software. Ideas?

    OK - you can download the standalone installed for Adobe Reader directly from the Adobe FTP site.
    ftp://ftp.adobe.com/pub/adobe/reader/win/10.x/10.1.2/en_US/
    Save the executable file onto your computer and then double-click on it - the installer should run as normal.
    If you want to install a different language, go to this address instead:
    ftp://ftp.adobe.com/pub/adobe/reader/win/10.x/10.1.2/

  • Cannot be read from or Written to. And cannot eject ipod! PLEASE HELP

    I'm having tonnes of problems with my ipod and itunes:
    1. I just bought a brand new macbook, and wanted to put all the music from my ipod onto my macbook, So i followed the directions on here for how to do that. incidentally, it did not work, and i was prompt to do nothing else but restore my ipod. Now that i've restored my ipod i can't sync songs from my Macbook to my ipod, and message occurs say " Attempting to copy to disk "LAUR'S IPOD" failed, device could not be read from or written to" The same message occurs on my home PC with windows. I have the latest version of itunes, the latest software on my mac, i've called 1800 they couldnt help, My ipod is still recognized by my computers, and still charges, it just doesnt sync, i've also tried deleting damaged music files too. I've restored my ipod about 3 times and still no luck.
    2.I also can never eject my ipod, a message occurs saying " cannot eject ipod, try closing applications first" and there are no other apps open. WHY IS THIS SO HARD!
    PLEASE HELP ME!! I've been with music for too long!

    Start with these articles and see if that gets you anywhere...
    iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date
    http://docs.info.apple.com/article.html?artnum=305136
    iTunes for Windows: iTunes 7 doesn't recognize iPod
    http://docs.info.apple.com/article.html?artnum=304434
    iPod missing in "My Computer" or in iTunes for Windows
    http://docs.info.apple.com/article.html?artnum=61711
    Also you might try forcing the iPod into disk mode first, then connecting it to your computer and see if that makes it show up in iTunes...
    Putting iPod into Disk Mode
    http://docs.info.apple.com/article.html?artnum=93651
    Windows confuses iPod with network drive or hard drive and may keep iPod from mounting or songs may seem to disappear
    http://support.apple.com/kb/TS1493
    Cheers,
    Patrick

  • The first tab in my browser always shows loading and cannot close it, Why?

    When my browser is open and have multiple tabs open, the first tab has the animated circle that shows that page is loading, and if I try to close that tab it does not close. I have tried to uninstall and reinstall but have not been able to clear this issue up, Please help!

    * "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    * "Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]
    * [[Troubleshooting plugins]]
    If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    * Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
    * Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

  • Partition not showing up and cannot be mounted

    Hi,
    I have a Samsung 840 pro SSD installed on my macbook with Mountain Lion and earlier my computer froze then the computer was stuck on a white/grey screen for a while before rebooting finally. Since I reboot, my second partition is not showing up. It was a partition to store data, when I check it in disk utility it says the disk needs to be fixed and after fixing it I still cannot mount it the error is still there. At the end of the disk repair this message appears "
    Updating boot support partitions for the volume as required." still I don't get it, it's not a bootcamp volume or whatever it's just some space on the drive with data on it.
    Has anyone ever encountered this problem? I have a time machine backup of my disk on a drive. I haven't tried to restore it though

    mac-a-damia wrote:
    Updating boot support partitions for the volume as required." still I don't get it, it's not a bootcamp volume or whatever it's just some space on the drive with data on it.
    That's ok, it says that for everyone, BootCamp or not.
    I have a Samsung 840 pro SSD installed on my macbook with Mountain Lion and earlier my computer froze then the computer was stuck on a white/grey screen for a while before rebooting finally.
    Gray, Blue or White screen at boot, spinner/progress bar
    ..Step by Step to fix your Mac
    I have a time machine backup of my disk on a drive. I haven't tried to restore it though
    Don't connect it unless you first  wiped the drive and reformatted it with a new OS X copy and upgraded in AppStore to the version matching the one on the TM drive, then you can restore.
    Erase, formatting, OS X installs on Mac's
    How to reformat a used Mac

  • HT1363 screen on my classic iPod does not show anything and cannot restore

    Brand new iPod Classic and the screen has gone blank...unable to restore, some error message pops up, not pleased with this product as this is the third one in a year! Any ideas how to rectify this problem?

    Connect the iPod to the computer and try to restore the iPod via iTunes.
    If iTunes does not see the iPod, place th iPod in recovery mode and then try to restore the iPod.  For recovery mode see:
    iPhone and iPod touch: Unable to update or restore
    If that does not solve the problem you may have a hardware problem and an appointment at the Genius Bar of an Apple store is inorder.  I doo not like that the corner gets hot.

  • Cannot download.... once read in download.. file disappears and cannot get icon

    I attempted to download Firefox on my IMAC desktop. I watched it download in my download folder. I could not however get that process finished as just when it was almost completed... It disappears?? I also could not get the icon to load to my applications folder on my prior attempt.

    That is rather distressing considering that I do not own or have access to an iOS device. So far after these many months (a year already ?) of using (or not using), I must admit that I am not an iCloud fan and really miss MobileMe.  Any suggestions on how to use the service for docs?  I honestly could care less about music or photos.   Another service is probably going to be the answer, I bet.

  • File cannot be read or written / File is busy and cannot be moved

    Trying to back up a firewire disk to another firewire disk and I get errors on certain files that say the file is busy or can't be read or written. The disk in question has had permissions repaired, I've run Disk Utility and Disk Warrior on the drive, it gets a clean bill of health. Most of the files will copy fine, but some get the error. At wits end. Ideas?

    Repairing Permissions only works on System Files not on your data. You might want to review their settings with BatchMod.
    Also, that File is busy message can occur when the OS finds itself copying two files of the same name into a folder.
    Regards
    TD

  • I paid for renewal of Creative Cloud but am still showing expired and cannot open any of the programs. What can I do?

    The countdown went to about 5 days and I upgraded the payment in February, but now I can't access any of the programs. I need these to get work done!

    Sign in, activation, or connection errors | CS5.5 and later
    Mylenium

  • "Amount must be a number and cannot be empty"

    Our customers keep having problems with our shopping cart...they get an error message that read "Amount must be a number and cannot be empty".  This is a new problem...the shopping cart worked fine until recently.  It also does not happen all of the time.  At first we thought it was an issue with Google Chrome, but not it seems to be happening with Firefox as well.  Any thoughts?

    Never mind, I see the problem. Mac OS X's scroll bars don't show up by default any more. Didn't see the extra fields to fill out.

  • I have a new MacBook Pro with OS10.8.2 and cannot get Contacts to print a list of addresses with pictures showing.  There is a check box selecting "picture" which has been checked - but no picture.  This worked fine on OS10.7.5.  Problem??

    I have a new MacBook Pro with OS10.8.2 and cannot get Contacts to print a list of addresses with pictures showing.  There is a check box selecting "picture" which has been checked - but no picture.  This worked fine on OS10.7.5.  Problem??

    First, back up all data immediately, as your boot drive might be failing.
    There are a few other possible causes of generalized slow performance that you can rule out easily.
    Reset the System Management Controller.
    If you have many image or video files on the Desktop with preview icons, move them to another folder.
    If applicable, uncheck all boxes in the iCloud preference pane.
    Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
    Check your keychains in Keychain Access for excessively duplicated items.
    If you have more than one user account, you must be logged in as an administrator to carry out this step.
    Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

  • Cannot "print" a window as pdf then read it in Adobe Reader; Adobe says the file is damaged and cannot be opened.

    Running Firefox 4.0 on an Intel Mac OS 10.5.8. Same problem with Firefox 3.6.16. You can save a Firefox window as a pdf file by using the File dropdown menu and selecting Print. Under Print, you can select PDF, then Save as PDF or Save as Adobe PDF. Firefox will save the file. If you try to open the file you get an error message that the file is damaged and cannot be opened. I did not have this problem in Safari; I followed the same procedures and the pdf file opened fine in Adobe Reader. Why is Reader rejecting the pdf file produced by Firefox when it did not reject the pdf file produce by Safari?

    If anyone is reading this still looking for what caused the issue and how to fix it here is what I discovered.
    The antivirus program our company uses, Bitdefender Antivirus Plus, was causing some of the PDF files not to open. After troubleshooting the different modules and settings the culprit was..
    Scan SSL in Privacy Control Settings. Turning it OFF solved the problem and all the PDF files that previously would not open now open just fine. This issue has been sent to Bitdefender for them to review. If you use a different antivirus program and are having this issue try locating the Scan SSL setting and see if turning it off solves the problem.

  • HT4059 i paid for a book, which i was reading, and now the book icon shows "paused" and i cannot open it. how do i fix this?

    i have been using ibooks on my ipad. one of the books i downloaded and had been reading is now showing 'paused" and i cannot access it.
    i cannot delete it or open it. the other books will open fine.
    how do i fix this?
    thanks

    Have you tried deleting the book and then redownloading it via the Purchased tab in the ibookstore in the iBooks app ? If it re-downloads in the same state then try the 'report a problem' link from your purchase history : log into your account on your computer's iTunes via Store > View My Account and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find that ibook and use the 'Report a Problem' link.

  • I have Adope Reader XI and cannot print.  How do I print?

    I have Adobe Reader XI and cannot print.  How do I print?

    Ctrl+P usually does the trick... If it's not working for you you'll need to explain what exactly goes wrong. We're not mind-readers and can't help you without more detailed information about your set-up and the nature of the problem.

Maybe you are looking for

  • Items not getting picked up in Return sales order

    Dear all, I am creating a return sales order with reference to a sales order. In my delivery doc the items can be categorised into 3 types: 1- Picking done; Movement type determined 2- Picking done; Movement type not determined 3- Picking not-done; M

  • F-28 Exchange Rate Difference Account with a zero posting

    Hi SAP Gurus, When I try to post an incoming payment, even though there are no exchange rate differences, the system post to exchange rate difference account. How to configure the system to stop displaying the exchange rate difference account when th

  • SAP FI report to excel

    How can I export a FI report into Excel?

  • Is there a way to hide photos?

    Can I make photos private that are inappropriate for children?

  • Link protection using MPLS

    Hi everybody I am reading a book on MPLS TE by  Eric Osbornne and Ajay . I have a question R1------R2---(cloud)----R4 Please consider the following config: R1 tunnel 0 ip unnumbered L0 tunnel destination ( 4.4.4.4) tunnel mode mpls traffic -engineeri