Reader opens in a highly magnified window, the toolbar is huge! Causes problems in the Print dialogue box, too. I can't figure out what I've done to make this happen, or how to undo it. Windows 8.1RT, MS Surface Pro3. Have re-installed too.

FIGURED IT OUT MYSELF!! It's when the Surface Pro is connected to a monitor, and the screen resolution has altered. Disconnecting the second screen puts everyting back to how it should be. Phew.

Similar Messages

HT1529 I have the new mountain lion OS and every now and again my screen zooms in. i can't work out what I'm doing to make this happen

I have the new mountain lion OS and every now and again when I'm working with the mouse the screen zooms in. How does this happen and how can I reverse it

You are double tapping with 1 finger.
System Preferences > Mouse > Point & Click > Smart Zoom.

I see "imac-54f9d5" under the "Shared" heading in my finder. I am not connected to any printers or other Mac devices. Is it possible that someone is remotely accessing my system? How can I figure out what this is?

I see "imac-54f9d5" under the "Shared" heading in my finder. I am not connected to any printers or other Mac devices. Is it possible that someone is remotely accessing my system? How can I figure out what this is?

is it your imac?
is it your your router's name?
are you by any chance connected to another wifi router then your own because the other one was open and not password protected?

All the sudden my iPod shuffle no longer shows up in my devices on my computer nor does iTunes show it? Why would this happen? How can i fix this? Anyone know?

All the sudden my iPod shuffle no longer shows up in my devices on my computer nor does iTunes show it? Why would this happen? How can i fix this? Anyone know?

Start with the "Shuffle not recognized" section in this Apple support document.
http://support.apple.com/kb/TS1412#q2
B-rock

How can i figure out what device downloaded apps

how can i figure out what device downloaded certain apps?

One way is to remove all apps and then reinstall a few at a time while watching the "Other" memory indicator, but this will cause a loss of any data the apps are storing, like files, high scores, settings, etc.
I don't know of an 'electronic' way of find this out.

I recently received a WD My Book Studio external Hard drive and am installing it but can't figure out what the difference between wd turbo installer 64 and wd turbo installer is. Can someone tell me. Thanks in advance for all your help.

I recently received a WD My Book Studio external Hard drive and am installing it but can't figure out what the difference between wd turbo installer 64 and wd turbo installer is. Can someone tell me. Thanks in advance for all your help.

Oh ok, well that was what the test said prior to reformatting the hard drive. Now, it doesn't find any trouble no matter how many times I run it. That's what has me so confused, everything seems to check out and yet...I can't do anything, not even install the software!

Trouble with calculating fields. Can't select (check) fields. Also can't figure out what's wrong with a division field (percent) that I created. Keep getting the pop up that format of the field doesn't allow blah blah blah... Help!

Trouble with calculating fields. Can't select (check) fields. Also can't figure out what's wrong with a division field (percent) that I created. Keep getting the pop up that format of the field doesn't allow blah blah blah... Help!

1. Use the mouse to select the field and then press the space bar.
2. A null string is the same as zero. What is the result for division by zero?

When I put my iphone 4s into my pocket (pants or coat) and move it around, the phone beeps/makes a tone. I can't figure out what is causing the noise.

I have a strange problem. When I put my iphone 4S into my pocket (pants or coat) and move it around, the phone makes a beep noise/tone. I can't figure out what is causing the noise. It doesn't sound like any of my regular applications. Maybe it is the lock noise but I can't tell for sure. More movement makes more beeps. Even walking with my phone in my pocket creates beeps. The IOS is 7.0.4 (11B554a). Anyone else have this crazy problem?

Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
If the issue persists...
Connect to iTunes on the computer you usually Sync with and Restore
http://support.apple.com/kb/HT1414
Make sure you have the Latest Version of iTunes (v11) Installed on your computer
iTunes free download from www.itunes.com/download

I probably misclicked when I activated the security lock on the iPhone and now I can not figure out what password I entered. Moreover, I have patches and funky looking phone so I can not restore iphine pres itunes. Please advice.

I probably misclicked when I activated the security lock on the iPhone and now I can not figure out what password I entered. Moreover, I have patches and funky looking phone so I can not restore iphine pres itunes. Please advice.

Your only recourse is to force it into DFU mode:
Turn your phone off and connect your cable to the computer, but not the device just yet. Start up iTunes. Now, hold down the home button on your phone and plug it in to the cable - don't let go of the button until iTunes tells you it's detected a phone in recovery mode. Now you can restore to factory settings.

HT1918 How do I reset security questions if I can't figure out what I entered originally?

How do I reset security questions if I can't figure out what I entered originally?

You need to ask Apple to reset your security questions. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to call, fill out and submit this form.
(122209)

An mp3 file on my computer will not import to itunes by either the drag-and-drop or the Add File to Library method. Can't figure out what I'm doing wrong. My OS is Windows 7.

I purchased an mp3 from a private website on my laptop. The itunes library i sync ipod to is on my desktop, so i copied the mp3 onto a flash drive and then into my desktop in the Downloads folder and Desktop folder as well as the itunes music folder, 3 places. I opened itunes on the desktop and read the instructions for importing music that's already in my computer. Neither the drag-and-drop or the Add File to Library method works. I've tried both ways over and over. Cannot figure out what the problem is. I do note that the name of the mp3 file doesn't show the .mp3 extension, it appears as simply it's title, Eating Healthy, without any extension at all. Could the filename be the problem, or do you have any other idea what I'm doing wrong? My OS is Windows 7, using IE9. Thanks.
ADDENDUM AFTER READING ANOTHER DISCUSSION HERE: I have now tried right clicking the song in Windows Explorer and choosing Open With, clicking itunes. The mp3 plays in itunes but does not add to the library.

I don't have a Recently Added playlist. However, I discovered that the file I had named Eating Healthy was given the name You Can Enjoy Eating Healthy when it copied to iTunes. I'm guessing iTunes pulled the full name of the piece from the internet. Upshot--the mp3 did transfer to iTunes on all 3 tries, but I was looking in my alphabetized list under E, not Y, so I didn't see it there. Thanks for your help.

How can I figure out what my password is and keep it unlocked? Every time I do a system update, it requires the password and sends me into cyber trouble with the remember my keychain access, requiring it every time I log in. A real hassle to be avoided

How can I find out what my password on the computer is? I had to change it due to my teenagers helping themselves, and now every time there is a system update, I have to have the password, which I cannot remember or find. It then wants it every time I log in and pops up Key Chain Access as well. Very annoying. I do not have the disc to reload it and fear I would loose everything on my computer as there is also trouble with the back up system. Too many issues and not enough solutions. Many thanks in advance!

I do not have the disc to reload
Why not? You need your system dvds to troubleshoot & to reset/change passwords in view of your current OS listed in your profile.
You can get replacement System Install & Restore CD/DVDs from Apple's Customer Support - in the US, (800) 767-2775 - for a nominal S&H fee. You'll need to have the model and/or serial number of your Mac available.
If you're not in the US, you may need to go through the regional Apple Store that serves your location to find the contact number. Here's a list of links to all of those - http://store.apple.com/Catalog/US/Images/intlstoreroutingpage.html Another resource: International Support Phone #s.
===============
I have to have the password, which I cannot remember or find.
When selecting passwords, make sure it's one that you will NEVER forget AND no one else can figure out.
Old school--- > Print it out & keep in a safe place. A place that ONLY you know about AND never forget.
New school---> Get a password manager utility. Highly recommend 1Password which is shareware. Do a Google search for free password managers.

Can't figure out what is the code

Hi
I got following macro that will help me to run certain transaction.
I just can't figure out where comments ends and where code starts so I was unable to run it for like 3 hours now.
In other words
I am trying to use Excel Macro that will get to active transaction in SAP and do waht I have recorded.
'SAPGUI Macro for updating SAP from Excel data 'Prerequisites: '1. Script Recording and Playback from the SAPGui must be enabled by admin '2. The Excel list must be set up from top left corner of a worksheet '3. The worksheet with data must be the active sheet '4. There is no error handling. Build it yourself! '5. The script will update the active (current) SAP transaction'Instructions for use 'Record a macro of your update actions. 'Paste the session.findById stuff between the <== and ==> markers'Edit the literal values and replace with Trim(CStr(objSheet.Cells(x, y).Value)) 'where x and y are the row and column counters'Open up your Excel sheet with data (row 1 is ignored here) 'Fire the macro! '===========BEGIN BOILERPLATE=================== REMSet up connection to the SAP screen: If Not IsObject(application) Then Set SapGuiAuto = GetObject("SAPGUI") Set application = SapGuiAuto.GetScriptingEngine End If If Not IsObject(connection) Then Set connection = application.Children(0) End If If Not IsObject(session) Then Setsession = connection.Children(0) End If If IsObject(WScript) Then WScript.ConnectObject session, "on" WScript.ConnectObject application, "on" End If REMSet up connection to the Excel data to be keyed into SAP: Dim objExcel Dim objSheet, intRow, i Set objExcel = GetObject(,"Excel.Application") Set objSheet = objExcel.ActiveWorkbook.ActiveSheet session.findById("wnd[0]").maximize
'===========END BOILERPLATE=====================
'REM Example: Mark material for deletion in Plant using MM06 For i = 2 to objSheet.UsedRange.Rows.Count 'Assuming there is a header rowREM Find a cell and put its value in: REM Note: The section of the Script shown below can be recorded ' and edited to pick data from the Excel sheetstrCN = Trim(CStr(objSheet.Cells(i, 1).Value)) strWerks = Trim(CStr(objSheet.Cells(i, 2).Value)) '<== session.findById("wnd[0]/usr/ctxtRM03G-MATNR").text = strCN session.findById("wnd[0]/usr/ctxtRM03G-WERKS").text = strWerks session.findById("wnd[0]/tbar[0]/btn[0]").press session.findById("wnd[0]/usr/chkRM03G-LVOMA").selected = false session.findById("wnd[0]/usr/chkRM03G-LVOWK").selected = truesession.findById("wnd[0]/tbar[0]/btn[11]").press 'session.findById("wnd[0]/tbar[0]/btn[0]").press '==> Next

Ok macro works and triggers actions from recorder. I was doing it with hope I will select data in SAP and paste in Excel AND/OR export file from SAP with data.
If I record select column and then copy it. Script is recorded until selection . It ignores copy (i tried use mouse right click and copy AND manual alt+F12 and then copy from context menu)
When I export recorder does open export window but does not writes the line relevant to clicking save.
I found such bits
'Choose the export format
session.findById("wnd[1]/usr/subSUBSCREEN_STEPLOOP:SAPLSPO5:0150/sub:SAPLSPO5:0150/radSPOPLI-SELFLAG[1,0]").select
session.findById("wnd[1]/tbar[0]/btn[0]").press
'Choose the export filename
session.findById("wnd[1]/usr/ctxtDY_FILENAME").text = "test.txt"
session.findById("wnd[1]/usr/ctxtDY_PATH").text = "C:\Temp\"
'Export the file
session.findById("wnd[1]/tbar[0]/btn[0]").press
But they dont seem to be relevant to my previous macro.
Any quick fix to get data out of Excel

I have an HP Photosmart C4180 all in one printer scanner and copier, I can't figure out how to scan more than one page at a time and then send as a PDF file via email

I have an HP Photosmart C4180 all-in-one, printer, scanner and copier. I can't figure out how to scan more than one page? It will only let me do one page at a time and then I have difficulty sending pages 1, 2 and 3 as one docuement. Any ideas??
Thank you, Jetteski

Hello Jetteski,
Hello Jetteski, Thanks for the post.
Since you are running a MAC, check the below links for some excellent information on scanning. Good Luck!
http://goo.gl/M8Cl2
http://goo.gl/cufK6
http://goo.gl/OTQoR
I work for HP but my posts and replies are my own....Thank you!

My macbook pro keeps freezing and shutting off when I am browsing the web on Safari. How can I figure out what is causing this issue?

For the past few weeks my computer will slow down when I have been on Safari for awhile, then freeze, and then just go black. I have to press the power button and then it goes to a black screen with the apple logo and a loading bar underneath when it reboots. I'm not sure what is causing the issue, but on my previous mac it would have an error message if something like this happened that I could submit. Any suggestions of where to start to solve this issue?
Thanks!

These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter "BOOT_TIME" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the BOOT_TIME log message that corresponds to the last boot time when you had the problem. Now clear the search box to reveal all messages. Select the ones logged before the boot, during the time something abnormal was happening. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
For example, if the system was unresponsive or was failing to shut down for three minutes before you forced a restart, post the messages timestamped within three minutes before the boot time, not after. Please include the BOOT_TIME message at the end of the log extract—not at the beginning.
If there are long runs of repeated messages, please post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Some private information, such as your name, may appear in the log. Anonymize before posting.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Step 2
In the Console window, select
          DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A crash report has a name that begins with the name of the crashed process and ends in ".crash". A panic report has a name that begins with "Kernel" and ends in ".panic". A shutdown stall report has a name that ends in ".shutdownstall". Select the most recent of each, if any. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot. It's possible that none of these reports exists.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash or panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

Reader opens in a highly magnified window, the toolbar is huge! Causes problems in the Print dialogue box, too. I can't figure out what I've done to make this happen, or how to undo it. Windows 8.1RT, MS Surface Pro3. Have re-installed too.

Similar Messages

Maybe you are looking for