Real time configurations for derivation types in COPA

We have taken the sample operating concern by going thru the path
< IMG Activity: Controlling - operating concern - sap operating concern template >, the Quickstart S-GO operating concern template>
and configured the following derivation types by looking at the examples:
- Derivation rule
- Table lookups
- Moves
- Clear
-Customer Enhancement
Also, it would be great if some one could provide me with real time configuration of the derivation types in COPA
Moderator: Please, read the rules of the forum before posting

Hi Praveen
Rec Type for Variance transactions is already fixed i.e. C and cant be changed....
You can use Z rec types in KE21N for manual postings/adjustments.... Or during external data transfer
If you can be specific on your requirement, we can discuss further using Exit COPA0002 or 0005... But for standard transactions, you cant change the rec types
Br, Ajay M

Similar Messages

  • Can somebody give some real time questions for alv report

    hi guru
    can somebody give some real time questions for alv report.
    answers also.
    regards
    subhasis.

    hi,
    The ALV is a set of function modules and classes and their methods which are added to program code. Developers can use the functionality of the ALV in creating new reports,  saving time which might otherwise have been spent on report enhancement
    The common features of report are column    alignment, sorting, filtering, subtotals, totals etc. <b>To implement these, a lot of coding and logic is to be put. To avoid that we can use a concept called ABAP List Viewer (ALV).</b>
    Using ALV, we can have three types of reports:
       1. Simple Report
       2. Block Report
       3. Hierarchical Sequential Report
    <b>Reward useful points</b>
    Siva

  • Is Ardence RTX required when I use PCI-7831R with labview real-time module for RTX target

    I am new in the labview real-time field. I want to use labview real-time module for RTX target on only one desktop. My card is PCI-78331R.  Is Ardence RTX necessary? Why I cannot find my card in the MAX after I configured the RTX?
    Thank you very much.

    Hi Ziaozhongda,
    You must have the RTX runtime engine installed before the LabVIEW Real-Time RTX module will install.  Additionally, you should follow the instructions in the "Using the NI PCI-7831R with the LabVIEW Real-Time Module for RTX" section of Getting Started with the NI 7831R (page 8).
    Please see Configuring Hardware for Use with RTX.
    Also useful is "How Can I Validate That My PC Will Run RTX?

  • Could u plz help me to find simple example for how to save data file in a spread sheet or any other way in the real time controller for Sbrio 9642 using memory or usb flash memory

    Could u plz help me to find simple example for how to save data file in a spread sheet or any other way in the real time controller for Sbrio 9642 using memory or usb flash memory

    Here are a few Links to a helpful Knowledge Base article and a White Paper that should help you out: http://digital.ni.com/public.nsf/allkb/BBCAD1AB08F1B6BB8625741F0082C2AF and http://www.ni.com/white-paper/10435/en/ . The methods for File IO in Real Time are the same for all of the Real Time Targets. The White Paper has best practices for the File IO and goes over how to do it. 
    Alex D
    Applications Engineer
    National Instruments

  • Please send me real time scenarios for plsql developer..

    hello xperts..
    please send me real time scenarios for plsql developer..it wiil be greatful to me .my mailid: < email address removed by moderator >

    Almost a duplicate of this thread: hi..everyone..plz share realtime unix shellscript commands
    and just as badly requested.
    Read: Re: 2. How do I ask a question on the forums?
    +Locking this thread+

  • Real time Example for Time depend Characterstics...

    Real time Example for Time depend Characterstics.
    In which Situation we have to swith to time dependent.

    hi ,
    for ex. employee designation which changes over a period of time but not frequently , also headcount and also stock etc .
    which is related to change over a period of time .
    regards .... kumar Sarvepalli ///// honor points if helpful

  • Real time Procedure for new configuration

    In real time what is the procedure for new configuration like new payment term. I want procedure in real time
    . thanks , Sravas   ...

    Hello,
       As long as your S2000 has an USB ADD, you will be able to use it with OmniDriver-SPAM.  The HR2000 will work fine.
      Here are two good videotutorials that will show you how to use OmniDriver-SPAM with its LabView dll to acquire spectra:
    http://spectroscopytv.com/2009/02/02/omnidriver-la​bview-part-1/
    http://spectroscopytv.com/2009/02/02/omnidriver-la​bview-part-2/
      Hope this helps,
    R

  • Please provide real time scenario for when we use object type in PL/SQL.

    Hi Experts,
    When we use this kind of code in PL/SQL block.
    CREATE OR REPLACE TYPE sample_object IS OBJECT
    (id       NUMBER
    ,name     VARCHAR2(30));
    CREATE OR REPLACE TYPE sample_table IS TABLE OF sample_object;I have read some docs ,but I didn't get any information where exactly we use this.
    Please provide one real time scenario with an example.
    How this is different from record.
    Thanks in advance.

    Hi,
    For an example please have a look at this....
    CREATE OR REPLACE TYPE FML_DAT_ITEMS_OBJ AS OBJECT
                      (F_NAME VARCHAR2 (20), L_NAME VARCHAR2 (20));
    CREATE OR REPLACE TYPE FML_DAT_ITEMS_FTAB AS TABLE OF FML_DAT_ITEMS_OBJ;
    CREATE OR REPLACE FUNCTION GET_FML_ITEMS_DAT (PFML_NR IN NUMBER)
       RETURN FML_DAT_ITEMS_FTAB
       PIPELINED
    AS
       OUT_REC   FML_DAT_ITEMS_OBJ;
    BEGIN
       SELECT FML_DAT_ITEMS_OBJ ('peter', 'zwan') INTO OUT_REC FROM DUAL;
       FOR I IN 1 .. PFML_NR
       LOOP
          PIPE ROW (OUT_REC);
       END LOOP;
    END GET_FML_ITEMS_DAT;To view the o/p:
    SELECT * FROM TABLE (get_fml_items_dat (5));
    F_NAME, L_NAME
    peter,zwan
    peter,zwan
    peter,zwan
    peter,zwan
    peter,zwan Refer these links to know more about the topic...
    http://www.oracle-developer.net/display.php?id=207
    http://www.oracle-base.com/articles/misc/pipelined-table-functions.php

  • Has anyone implemented real time datasource for COPA ?

    Hello,
    Has anyone implemented a real time data source for COPA ? Please share details of the process for how this can be set up. Thanks.

    Hi,
    Please follow the following steps...
    COPA Extraction
    The below are the command steps and explanation. COPA Extraction -steps
    R/3 System
    1. KEB0
    2. Select Datasource 1_CO_PA_CCA
    3. Select Field Name for Partitioning (Eg, Ccode)
    4. Initialise
    5. Select characteristics & Value Fields & Key Figures
    6. Select Development Class/Local Object
    7. Workbench Request
    8. Edit your Data Source to Select/Hide Fields
    9. Extract Checker at RSA3 & Extract
    BW
    1. Replicate Data Source
    2. Assign Info Source
    3. Transfer all Data Source elements to Info Source
    4. Activate Info Source
    5. Create Cube on Infoprovider (Copy str from Infosource)
    6. Go to Dimensions and create dimensions, Define & Assign
    7. Check & Activate
    8. Create Update Rules
    9. Insert/Modify KF and write routines (const, formula, abap) 
    10. Activate 
    11. Create InfoPackage for Initialization 
    12. Maintain Infopackage 
    13. Under Update Tab Select Initialize delta on Infopackage 
    14. Schedule/Monitor 
    15. Create Another InfoPackage for Delta 
    16. Check on DELTA OptionPls r 
    17. Ready for Delta Load
    LIS, CO/PA, and FI/SL are Customer Generated Generic Extractors, and LO is BW Content Extractors.
    LIS is a cross application component LIS of SAP R/3 , which includes, Sales Information System, Purchasing Information System, Inventory Controlling....
    Similarly CO/PA and FI/SL are used for specific Application Component of SAP R/3.
    CO/PA collects all the OLTP data for calculating contribution margins (sales, cost of sales, overhead costs). FI/SL collects all the OLTP data for financial accounting, special ledger
    1) Add the fields to the operating concern. So that the required field is visible in CE1XXXX table and other concerned tables CE2XXXX, CE3XXXX etc.
    2) After you have enhanced the operating concern then you are ready to add it to the CO-PA data source. Since CO-PA is a regenerating application you can't add the field directly to the CO-PA data source. You need to delete the data source and then need to re-create using KEB2 transaction.
    3) While re-creating the data source use the same old name so that there won't be any changes in the BW side when you need to assign the data source to info-source. Just replicate the new data source in BW side and map the new field in info-source. If you re-create using a different name then you will be needing extra build efforts to take the data into BW through IS all the way top to IC. I would personally suggest keep the same old data source name as before.
    If you are adding the fields from the same "Operating concern" then goto KE24 and edit the dataaource and add your fields. However if you are adding fields outside the "Operating concern" then you need to append the extract structure and        populate the fields in user exit using ABAP code.   Reference OSS note: 852443
    1. Check RSA7 on your R3 to see if there is any delta queue for COPA. (just to see, sometimes there is nothing here for the datasource, sometimes there is)
    2. On BW go to SE16 and open the table RSSDLINIT
    3. Find the line(s) corresponding to the problem datasource.
    4. You can check the load status in RSRQ using the RNR from the table 
    5. Delete the line(s) in question from RSSDLINIT table 
    6. Now you will be able to open the infopackage. So now you can ReInit. But before you try to ReInit .... 
    7. In the infopackage go to the 'Scheduler' menu > 'Initialization options for the source system' and delete the existing INIT (if one is listed)                                                                               
    Regards,
    Tapan

  • When to use Real Time Apply for Logical standby..!!

    Hello All,
    I have been trying many ways to speed up the archival on primary and improve sql apply on logical standby, but still we are getting about 45-50 mins of delay between primary and logical standby.
    We wanted to have our transactions applied on logical standby within couple minutes. Which i guess wont be possible in async mode.
    That's why i am planning to implement Real Time apply between primary and logical standby.
    Now since both our databases are too far away from each other (Primary is in US and logical is in India) would it be recommended to implement real time apply in such scenario? And if implemented would it affect Primary DB Performance?
    Also if there might be some packet loss or network hitch would Primary will try again and keep logical DB in Sync with Primary?
    Any help or suggestions would be great.
    Thanks.

    yes, real time apply is recommended in your scenario.
    however due to the geographical distance between your primary and standby; I would suggest to keep your standby in current mode - max performance ; ASYNC- itself. It would not affect the performace of the primary.
    As long as you set the FAL parameters and configure tnsnames properly and ensure proper deletion policy for archivelog cleanup in primary ( so that it's not deleted before shipping if need be), you shouldn't find any problem with primary & standby synching.
    Good Luck.
    Cheers.

  • Remote Extractor and Real Time Infocube for SEM BCS

    Hi Experts,
    I have somes doubts about the integration between SEM and BW.
    There is a cycle that have the next processes:
    1.- begin in R/3 with the movements in FI, CO and/or general ledgers
    2.- Activate the extractors standards for replicate/extract data to BW. For example, 0FI_GL_XXXX.
    3.- Configure a method for take the information from BW to SEM.
    4.- My doubt begin here... For take the information from SEM to the real time infocube, where I configure?  What Have I for configure?
    The real time infocube, What is the proposal? Where take the data?  Here, Do the remote extractor begin to apply?
    Thank you very much for your collaboration.
    Regards,
    Jeysi Ascanio

    We're using 0FI_GL_20 to read directly from FAGLFLEXT into SEM-BCS via a BI remote cube.  There are some basic transformations in BI to "populate" the remote cube, then a standard Load from Data Stream in BCS to do final mappings.  In the BCS workbench, just create a source data basis off the remote cube.
    This works at my current project due to fairly low ECC data volumes.  If you are doing any complex mapping on the Company or Fiscal Year / Period infoobjects, you may need to create a inverse mapping routine in the remote cube to transfer selection criteria.  If you see messages in the monitor following a data load such as "xx,xxx of xxx,xxx records ignored", that means that you are reading too much data from ECC and it is only getting filtered on the BCS side.  We had this problem with a custom extractor and adding an inverse mapping routine cut the load from ~5min to 30sec.  (Basically, the custom, template-delivered, extractor only had 0FISCPER, not 0FISCPER3 and 0FISCYEAR, so we would read all 17 K4 periods into BI, map them into BCS, then BCS would throw out the unneeded periods.  Unfortunately, we did not have the option to change the extractor, so this was the best approach.).
    If I had large data volumes, I would use a regular BI basic cube for staging (or possibly a multi-cube with a mix of basic and realtime, depending on the load requirements to BCS).
    If you use 0FI_GL_20, I would strongly recommend you implement OSS Note 1245822, or be on SAP_APPL 603.0002 or later.
    Hope that helps,
    - Chris

  • Regarding the 'Dispatch time' settings for output type...

    Hi Experts,
    May i know what 'Send with application own transaction' means when we configuring output type in SPRO for 'Dispatch time'.
    Cause i knew if we set it as 'Send immediately', then this output type will be triggered upon saving the orders.
    But i dont know what that item for..Could you kindly help me on this...
    What it means if we set the dispatch time as 'Send with application own transaction' for delivery output..??
    Thank you very much.

    Hi,
    If you choose 'Send with application own transaction'  when maintaining condition record for output type,during order,delivery and invoice saving the output type signal is yellow,that means unless you select that output and trigerred for printing it will not goto the spool.i.e in simple words the output is for manual printing.......
    Let me know if you need any clarifications on this..
    Regards,
    Chandra

  • Real time apply for logical standby

    Hi
    Oracle 11.2.0.3.0
    I have a primary database orcl and logical standby database orcl_std.
    Real time apply is enabled. I have standby redologs in both primary and standby sides and I`ve started recovery with below command:
    ALTER DATABASE START LOGICAL STANDBY APPLY IMMEDIATE;
    When I create a new table in primary database, I am unable to see it on standby database (Although real time apply is enabled)
    However, when I switch log in primary, I can see the new table in standby database.
    My question is, why realtime apply is not working in my scenerio ? I was expecting to see the new table immediately in standby database once it is created in primary database. Why am I supposed to wait for log switch in real time apply ?

    Using Real-Time Apply to Apply Redo Data Immediately
    http://docs.oracle.com/cd/E11882_01/server.112/e25608/log_apply.htm#i1022881
    1.What is compatible parameter, it should be 11.1
    2.Try to check parameters mentioned in below link:
    http://easyoradba.com/2011/01/10/real-time-apply-in-oracle-data-guard-10g/
    Regards
    Girish Sharma
    Edited by: Girish Sharma on Nov 15, 2012 12:37 PM

  • Real time questions for HFM

    Hi, Gurus'
    Can anyone plz answer for the below questions
    1. How to restart the services in Real time.
    Example: If workspace service need to be restarted. what kind of procedure we need to follow for this situation?
    2. How to overcome system performance issues specially in month ends, while number of concurrent entities loading the data in to HFM Application at the same time?
    Do we need to follow a protocol like one day few entities data loading, next day few more entities data loading.... like this??
    3. How frequently we need to take the backups for the data and applications? like daily,weekly or monthly?
    Example: if it is on Daily basis, how to restrict the other entities from being loading the data in to HFM Application while taking backups for the particular timings? is it effects the Data Accuracy?
    4.What is the best approach to move the DEV application from DEV to Production environment for which few accounts or Entities added recently.
    Means CopyApplication utility, migration or extracting metadata and loading to Productions application??
    5. what are the common steps will take in real time, to inform all the entities to log out the HFM application for maintenance or any other purpose?
    Thanks for your help in advance
    Regards
    Smilee

    Hi,
    In a real time environment, the following process will be followed in general
    1. Most of the organizations will prepare financial close cycle timelines for the entire fiscal year in advance. This activity will be taken care of fiance department
    2. Get an approval from financial director for the close cycle timeline and make it to frozen state unless any exception comes in
    3. Based on the timelines, IS department will prepare the maintenance schedule of Hyperion EPM instance by keeping in mind that there should be no maintenance activity during the close cycle time
    4. The maintenance schedule will get approved by IS department and then taken forward to finance department for final approval. If any changes\recommendations suggested by finance department then it will be incorporated by IS department and get the final approval
    5. Notify the HFM end users about the maintenance schedule well advance by an e-mail communication,teamsite , business meetings etc
    6. Start sending reminder mail about the scheduled maintenance activity one day to all the HFM end users before the activity starts
    7. Start sending the final reminder mail about the scheduled maintenance activity one hour before the activity starts
    8. Once the maintenance activty is completed, send an email communication to all the HFM end users that the HFM system is up and running now
    9. In case of any un expected issue during the maintenance activity which might lead to increase in the downtime required for the maintenance activity.Inform the key stake holders at the earliest and inform the end users accordingly
    Thanks..

  • Time contraint for wage types which are the subtypes of the Infotypes.....

    Dear Sap folks ,
    Anybody can explain that "what is the role of "Time contraint"(Once / Sev.Times) for wage types which are the subtypes of the Infotypes like IT0015 and  IT0014 (V_T512Z).
    Thanks & Rgards
    Maria Carlos Perera

    Hi,
    any wage type marked with once can be maintained only once for that specific period and several times means it can be there more than one time.
    For example, IT0015 wage type XXXX has value once. You are booking this wage type on perticular day say 12.06.2011 then you cannot book same wage type XXXX on 12.06.2011. But you can book this on any  oteher day of that month. if its several times then you can have several entries on same date.
    Regards,
    Poorvi.

Maybe you are looking for