Real time issues faced during Sap Implementation.

Hi All,
Please let me know some real time issues faced during SAP end to end implementation. Hw did u get over the issues.
Issues faced during Production Support.
I have an F2F interview. Please help me out.
Regards,
Somya

Hi,
This is Srinivas If u dont mine can u help me in Sending me the solutions to me what type of issues we will face in sap/bw implementation like issues and defeacts can u send to my mail [email protected] can u give me solution for error9,error8,return8 can able to plz help me .
Regards,
Vasu.

Similar Messages

Please tell me some real time issues faced by u in SCRIPTS

please tell me some real time issues faced by u in ur experience

First understand SAP scripts are client dependent..changes automatically not reflects in all development client once it is change in once client.
We mostly see alignment issue in SAP script it is mostly because of printer settings etc...
Also we may have few problems when printing unicode characters.. for printing double digits characters... like Japanese, chinese, korean etc.. we should have a printer with unicode enabled..
Regards,
SaiRam

Critical Issues During SAP Implementation or After Golive

Can anybody tell me one of the most critical/ challenging issues During SAP Implementation or After Golive
in these modules:-
MM implementation
PP implementation
SD implementation
FI/CO implementation
PS implementation
QM implementation
HR implementation
BI implementation
XI implementation
Thanks and regards
RS

hi,
I will list out few of critical issues in
Implementation :
1 . Ensure 100% mapping of business process for all modules with SAP(avoid customization in support phase)
2. Unit & Integeration testing should be through with all validations
3. Master datas(Vendor,Customer) care must be taken will uploading datas thru LSMW,
If there are common vendors for all plants,Create a vendor for a plant extend it to other plants
4. Check tax procedures are customized according to requirements.
5. Complete all print document customizations before go live
6. Complete end user training(2 or more cycles) should be top priority before go live(This will avoid
cancellation/reversal of documents after post go live)
7. Ready with standard MIS reports & customized reports for business decision making
8. Excise opening balance updation in tables for RG1 register in tables(Note 951955) on go live
9. Check all tables datas are updating correctly
10. Declare go live to SAP Support
11. Check All user authorization should be correct according to their roles.
12. Centeralize all master datas creation(avoid duplication)
13. Create transaction variants to avoid entires in unnecessary fields & make certain fields mandatory.
14. Ensure document numbering is completed for all documents
15. Validate accounting entries are hit properly according to requirement in quality client with FI CTM(Core team member).
After Go live :
1. Missing authorization for users will play key part here,For ex : PGI while doing delivery,Excise capture & post in MIGO/J1IEX.
2. Do internal audit every month,identify transactions if there will possibility for misuse or wrong entries,requires validation,identify users weak in certain areas.
3. Identify there is enhancements to be done in transaction process(By step-2)
4. Prepare a list of month & year end activities to be performed for all modules give to users
5. Prepare a list of frequently used transaction codes module wise give it to users
6. If there is subcontracting,ensure challan creation,GR,reconcillation should be done regulary(monthly)
7. Train the users,take reports in respective modules.
8. Additonal customization might be done in print documents.
9. Instruct users/CTM's to adapt SAP Standard practise
10. Update excise tax rates after every indian budget
Hope it helps.
Edited by: Jeyakanthan A on Apr 29, 2010 6:48 PM

Real time issues

hi there,
can any one share some of the issues that have been dealt with in real time. i.e.during blue print stage, <b>especially in realisation stage</b>, final preparation stage
puhlease answer this question immediately

Hi Medasani,
Real time issue you can get it from the Sap support consultants. Hence, getting all the information is very difficult.
In what basis you are asking let me your requirements.
For Example :- Tolerance limits is has to increase to Rs.1 to Rs.100. for employees and vendor / customer. This is the issue from client.
How you will decide that to increase.
First you should understand the clinet work flow and get the approval from client end (core Team) then you have to increase meanwhile you have to decide the % also.
Oba3 /Oba2
Warm Regards,
Sivakumar Sathiyamoorthy

Role & Responsibilities of an ABAPer during SAP Implementation

Dear Friends,
Shall anyone of you kindly let me know of a link or send a document addressing the Role & Responsibilities of an ABAPer during SAP Implementation?
Regards,
Alok.

Hi,
ABAPer is required after installation and business study by functional consultant...
In case of upgrade project, ABAPer is required during upgrade (Basis activity) itself in SPAU and SPDD step.
Otherwise, ABAPer has following role in their area:
1. Business study in brief. (To resolve simple issue and to understand logic)
2. Coding for User exits / enhancements to co-operate with functional consultant.
3. Custom reports / Program developement (Normally print programs and some analytical reports)
4. Upload program implementation thru' BDC / BAPI / LSMW
etc.
5. Interface developement if required. (in case of legacy system integration projects)
These are the major tasks of ABAPer in implementation project.
Activities that form the SAP implementation process are:
1. Project Preparation
2. Sizing and blue printing
3. SAP Functinal development - here abap comes into picture
4. Final Preparation
5. Go live
Have a look at below link. It will give you more details abt the same.
http://en.wikipedia.org/wiki/SAP_Implementation
<b>Reward points</b>
Regards

Real time issue

Hi all,
Can any body plz send me some FICO real time issue on [email protected]
and plz tell me hw shld I prepare for interview
Thanks & Regards
Vaibhav

Hi Balraj,
In the normal practice, developers will try to find the similer infocube (as per the requirement) in the Business content. But always you will not be lucky to find such infocube in Business content. You need to create at your own to suite the business requirements. Regarding the characteristcs & key figure, it 's again depend on the requirements. Calculated object can be assign as key figure like. Sales qty, revenue & net sales etc. where as Dimesion (characteritcs) will be purely depends on the reporting point of view. Like Customer, Material & Sales Document type etc.
Hope this will help you !
Thanks,
Sanjiv

Real time business functionality using SAP Xi and hardware included????

Hi All,
I am quite new to sap-xi. i have practised some of the scenarios that can be done with xi.
I was just trying to visualise some of the real time business requirements where SAP XI is used.
For example
Some may have used Sap XI to transform data between file server and SAP system or may a web serve asking for details from sap system to display datas or some times sap xi systems sits betweem an integration server (like biztalk etc) and sap system.
Can anyone of you can give me some of the real time requirements you have dealt with over the years
in terms of business functionality and servers involved in the whole system?
Thanks
Rakesh

Hi
Various scenario's:
FILE-FILE
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
/people/srinivas.vanamala2/blog/2007/02/05/step-by-step-guide-xml-file-2-xml-file-scenario-part-i
XML to PDF
/people/divya.vidyanandanprabhu/blog/2005/06/28/converting-xml-to-pdf-using-xi
Work with BPM
/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm
File to IDOC
/people/venugopalarao.immadisetty/blog/2007/01/24/troubleshooting-file-to-idoc-scenario-in-xi
E-mail alerts in XI-CCMS
/people/aravindh.prasanna/blog/2005/12/23/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part--1
RFC using BPM
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
HTTP to RFC
/people/community.user/blog/2006/12/12/http-to-rfc--a-starter-kit
IDOC to JMS
/people/saravanakumar.kuppusamy2/blog/2007/09/26/an-approach-to-handle-total-record-counts-in-idoc-to-jms-scenarios
/people/sudheer.babu2/blog/2007/01/18/asyncsync-communication-using-jms-adapter-without-bpm-sp-19
Pls : Reward points if helpful
Thanks
Vishal

SEM-BPS Real times issues

Hi Gurus,
I'm new to SEM-BPS Real times issues also some interview questions on SEM BPS. How we want to answer please forward to my email id: [email protected]
thank regards
Suresh

Have you tried posting to th eBusiness Planning forum which is focused on SEM/BPS? It's under the Business Intelligence category.

Real time issues in fdm

What are the real time issues in fdm

Nice and vague, try to be more specific with your questions and you will likely receive a better response.

Tasks/activities of a Basis consultant during SAP implementation

Hi,
Could someone share the list of tasks/activities of a Basis resource to handle during an SAP Implementation project.
Thanks in advance,
Srinivas

HI,
i think these are the simplest Basis activities in an sap implementation.
1. Preapration of the Landscape of the systems
2. Connectivities btw. different systems like SAP R/3 - BW and so on
3. Transport Administation i.e TP creation, release, importing to QA - PRD and so
4. configuration of RFCs and TRFCs if needed
5. Config. of Data Transmissions
6. Config. of IDOCs and Message Types
7. Cutover plan preparation for the Go-Live
8. System back ups and Logs Maintanance
9. Installation of all required Patches and Notes
10. system down time estimatations and planning
Rgds
Radhakrishna D S

New functionality in ECC 6.0 and problems during sap implementation

Dear Gurus,
may i know the details of the New functionality in ECC 6.0 on (MM,SD,PP,QM,PS,HR,PM,FI/CO,BI,XI,DMS ) or what is the problems coming at the time of implementation of ECC 6.0.
THANKS AND REGARDS
RS

Ritesh,
Question is bit confusing
may i know the details of the New functionality in ECC 6.0 on (MM,SD,PP,QM,PS,HR,PM,FI/CO,BI,XI,DMS )
That means you are going to upgarde from some earlier version .what is that version ?
Then you might find some specific information at
https://websmp102.sap-ag.de/uda -
>Upgrade Dependency Analyzer
what is the problems coming at the time of *implementation* of ECC 6.0.
If its a new implemenation you will not face problem , but you need to configure everything accordingly.
Problem depends upon what all you are using from standard and customizing.
Above provided link will help you.
Just add up
http://wiki.sdn.sap.com/wiki/display/ERPLO/NewfunctionalityinECC6.0%28+MM%29
Regards,

Can anybody get me some real time issues?

hi alll gurus,
i am attending the interviews... with ur kindness am able to handle the all the basic level of
subject part. But, they are asking the issues and gap analysis what u have got and cleared?
so that , am requesting to get me some helpful data regarding above things.
am very thankful to u...
hope will get me the above...
regards
vasan

hi arun,
1.Mostly the issues are related to master data.Means the user enters wrong master data such as customer master fields (Eg:-Account assignment group,Tax code,Currency,Dopp etc) due to this processing of sales order gets stuck.
this situation applies to other masters as well like material master,condition master,output master etc.
2.Issues related to outputs :-If you have prepared any Z outputs then the user will ask change in the layout,additional fields in output,Wrong values may show in the outout, New output all together.
3.Issues related to Z reports :- Same as outputs.
4.New routines or userexits might coome in picture because of some specific bussiness reqirement which is not possible to deal with standard SAP.
5.Awareness issues :-This is frquently faced because some new users might not know how to operate the systems.
6.Authorization not provided for the users for a particular transaction.
Normaly the issues we face in support porject are in follwing categories
1.Awareness
2.Modifications
3.New requirement (Functional/technical/Abap)
4.Authorization
pl reward if it helps.
Thanks,
Sadhu Kishore

Send me any real time problems(tickets) in sap fi/co support project

i want clear information

Hi
Check the link below.
http://sap-img.com/human/time-management-queries.htm
This will provide you questions on time management.
Reward Points if it helps.
Regards
Karan

HD WorkFlow, Having Real Time Issues

Hey I've captured 422 ProRess, I need to know is there a quicker way of working with it in realtime Mulitclip editing, other than conforming back down to HDV. I'm experiencing a lot of dropped frame issues.
In HDV I could cut realtime mutlclips but now that I've online with ProRess My system acts like it can't handle it which is nutz, I've got a killer system. I thought the proRess codec was suppose to be better than the HDV for this reason. Any workflow solutions would be greatly appreciated.
Thanks
J.

What sort of drives is your media stored on? ProRes has a MUCH higher data rate than HDV. HDV is in the ballpark of 4MB/s, whereas ProRes is between 18MB/s and 24Mb/s. Getting multiple streams of HDV for multicam shouldn't be too difficult, but getting the same for ProRes...multiple streams? You need a pretty hefty RAID for this. Two Drive eSATA Raid 0 might work. Better to have a 4-5 drive Raid 0 or Raid 5. ProRes is lighter than Uncompressed HD, but more taxing than HDV...and again, you are trying to play back multiple streams when you are using the Multicam feature.
Shane

Real time issue and need a solution

Hi Bi experts,
Currently one standard cube is already running in production.
Now i need to make a multiprovider with this standard cube and another one new DSO. But i wish to add a new infoobject to the standard cube, without affecting the production. Because it has being used for so many areas.
How to add a infoobject to that std cube?
Any solution pls suggest me...
regards
peras

Hi,
Try creating a Zcube as Ashok had mentioned above, else try remodelling.
Regarding remodeling Steps
Remodeling is one of the good feature in BI.
This helps in remodeling your Infoprovider, when its filled with data.
You can add characteristics and key figures in BW 3.5 without deleting data in the infocube, but you can't remove them without deleting all data first.
Deleting data is also needed when you change dimensions.
If you dont need any history data you can just add the keyfigure in Edit Mode.The corrresponding update rules may get deactivated and you may have to reactivate them again.
/people/mallikarjuna.reddy7/blog/2007/02/06/remodeling-in-nw-bi-2004s
http://help.sap.com/saphelp_nw70/helpdata/en/d0/46144236bcda2ce10000000a1550b0/frameset.htm
/thread/782986 [original link is broken]
info cube
Remodeling Tool in BI 7.0
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/06/28/remodelingToolinBI7.0
Library-Remodeling InfoProviders
http://help.sap.com/saphelp_nw04s/helpdata/en/58/85e5414f070640e10000000a1550b0/frameset.htm
Remodeling concept in BI 7.0
Adding Key figure to existing cube
Adding Key figure to existing cube
Thanks,
JituK

Real time issues faced during Sap Implementation.

Similar Messages

Maybe you are looking for