REALLY need help on this one... befw11s4 w/ Xbox 360

My system 2 PCs hard wired. 2 Printers wireless. Running XP. Also have Directv DVR and Xox 360. Everything used to function correctly. Now DVR and XBox wont connect to BEFWS11 V2. I have reset everything and started from scratch. I have also disconnected everything from the LAN expect PC1 and Xbox. The router appears to give it and IP address (shows up in DHCP table and on Xbox) BUT 1- when I ping the address from my PC no response. 2 - when I run the test from XBox is says it gets IP address but can't see my computer. I see very similar behavior from the DVR. I did not change anything drastic that I am aware of. I am at a loss - any experts out there. I have turned off firewalls - no help. This used to work and now does not. On the Xbox I can't get either media sharing or Live to work. I can get ping responses from 2 PCs and 2 printers on the netwrok, but not Xbox...
I am stmped - any help out there?
krammer

Try assigning Ip addresses manually to the devices and check if you are able to communicate or not.

Similar Messages

Startup Screen Pixelated - I really need help on this one.

15" Macbook Pro - Spring 2011
My startup screen sometimes would be pixelated with the Apple logo and then would go to grey screen and do nothing... then I would be forced to shut down and power it up again. On two occasions, the bootup would have stripes on it. See photo.
And then the occasional lockup while working on something would happen and I was forced to power it down. This would happen periodically and not every day.
So... I had this problem a couple of months ago (for several months) and the Apple store kept my Macbook Pro for a few days and said there were reported no problems. They were clueless as to why I had the above screen show. They said... maybe it is a bad installation of the OS and that it got corrupted.
So a couple of months later and I am now I am having the same issues again. But this time, I had bought another HD and installed Mountain Lion on it... and I have it connected via USB. I had used it several times before last night when I held the option key down to choose my startup disk to be the new HD via USB. Then I get this pixelated screen again, but this time it was at the startup disk screen. See Photo.
It's like you have a car problem and you take it in to the shop only for it to not malfunction... I really need some guidance on this one. My AppleCare warranty just expired (was valid during my visit to the Apple Store)... And I am not a happy camper... I always use macs... and I teach everyone who has them how to use them.
So to be clear... This is the same internal HD that I had when I took it to the Apple Store. (Lion)
I installed Mountain Lion on a new HD connected via USB and have worked off of it for a few days with no problems, choosing it as a startup disk.
Last night booting with the option key held down I get this pixelated screen, whereas before it was never pixelated holding the option key down.
So I have a couple of questions:
Is the Boot Screen above run by the motherboard or the HD? If it is the MB, then I need to talk with Apple again.
Does anyone have any clue what is happening?I have reset my PRAM and switched out my RAM.
If this screen is run by the same HD in the laptop, then maybe I just need to take it out....?
I would appreciate any genius expertise. I am a little frustrated that I am having this problem and cannot narrow it down. I use my laptop extensively for presentation, graphics, and teaching and now I am afraid of it.

Your 10.7 EFI may be corrupted.
The way a Mac works is EFI is updated via Software Update, it's written to the OS X partiiton, then gets loaded into the hidden EFI partition and read/used upon the second boot.
So it takes two reboots to load EFI and goes into the EPROM boot memory.
My terminolgy might be inaccurate as I didn't take a Apple course for certification, but I understand a little about the boot stage from my Linux on Mac experience.
If your 10.7 EFI is corrupted on one drive, and you've got a 10.8 clean EFI on another, then it takes two reboots from the same drive to clear and use it's EFI into boot memory.
So if you've booted 10.7, then option booted to use 10.8, it could be the corrupted 10.7 EFI still in memory.
The way to fix the corrupted 10.7 EFI partition is a total wipe and format of the entire drive to catch the hidden EFI parition, then install 10.7 fresh and update.
Of course Apple made this difficult with Recovery Partition which won't allow a complete drive erase.
However you can do this
http://osxdaily.com/2011/08/08/lion-recovery-disk-assistant-tool-makes-external- lion-boot-recovery-drives/
There is also a way to install EFI firmware from a cd, however I don't know where it goes, reboot the 10.7 drive twice anyway
https://support.apple.com/kb/HT1237
http://support.apple.com/kb/DL77
Since your out of warrantly, you might want ot just go ahead and repalce the internal drive and see if that fixes the problem.
http://eshop.macsales.com/installvideos/

I really need help on this one.

Hello:
When I first purchased my iPod nano a little over two years ago, I was able to download my itunes which amounted to about 400 songs. The capacity of this ipod is 4Gb. I restored it and downloaded 46 songs. It shows that I have only 1.5 Gb left. This doesn't make sense to me because it is much less than what I had before. Even with 400 songs, I had about 1.5 Gb left when it was new. It seems to me something is wrong with the ipod as it doesn't seem to be compressing. Anyone have any ideas about this? Is there a program that I am able to download to solve this issue? Thank you for any help you can give.
Best regards,
Mel or zzmel

Thanks for your response. I don't know what the bit rate is. When I first got the nano, I was able to download in compressed format. For some reason I am unable to do that now and the few songs I have eats up a lot of memory. I have the latest iTunes and I tried to look into the options to see if there was anything that indicated compression. I could not find it. I have tried resetting the nano and cleared everything out. I again tried to transfer my library and the indicator showed that I have used about 1.5Gb and leaves me about 1.7Gb. I only have 42 songs on my nano. I wont even have 100 songs which will use all the memory or 3.7Gb. I must be doing something wrong and that is why I am seeking help. This never used to be this way. Thanks for your response.
Mel or zzmel

Really need help with this one!!

hi all im posting here in the hope that some one can show me some light at the end of the tunnel as to my bb problem as its starting to get depressing now!
long story short ive had bt bb for 4 weeks now and im paying for 8mg as thats the fastest my area can provide but my transfer speed is locked at 2mg maximum. countless phone calls later they said its a throughput issue and they will put a request in to reset my profile and everything will be fine. as i thought it didnt work. lots of phone calls later they said i had to wait 10 days after the request is put in for my speed to increase. waited 12 days and still nothing! more phone calls later they eventually sent an engineer round who said himself he cant see why my downloads are locked at 2 mg when after his own tests he said the line should be giving me at the very least a stable 6.5mg so he proceeded to put a request in of his own to a bt computer thats codenamed "rambo" to increase the speed to my house. he said i should see results after 4 hrs but in some rare cases its taken 72 hrs to kick in. so i ended up waiting 4 days and still **bleep** all. im so so sick of bt and all the **bleep** they are feeding me as they keep telling me every single time they say there gonna fix it that this time it will 100% fix my problem and it never does. really feel im being ripped off cos im paying for the top package in my area and im not getting anything anywhere near what i should be. can anyone please help with my problem it would be very much apreciated.
thanks for reading all this peeps

also heres the speed test results
FAQ
Test1 comprises of Best Effort Test: -provides background information.
Download Speed
1840 Kbps
0 Kbps
2000 Kbps
Max Achievable Speed
Download speedachieved during the test was - 1840 Kbps
For your connection, the acceptable range of speeds is 400-2000 Kbps.
Additional Information:
Your DSL Connection Rate :8128 Kbps(DOWN-STREAM), 448 Kbps(UP-STREAM)
IP Profile for your line is - 2000 Kbps
If you wish to discuss these results please contact your ISP.
If you are experiencing problems with specific applications, servers or websites please contact your ISP for assistance.
whats really getting to me now is bt keep admitting to me my acheivable speed should actually be in the region of 6.5 mg and my profile shouldnt be set to 2000kbps so if they know the problem themselves why cant they fix it

Really need help on this one ! Tremolo sound in my guitar audio track.

I did some fingerpicking with my acoustical guitar track of GB4. But can't for the life of me figure out how to to get rid of the tremolo sound. It sounds like I added a chorus effect. But recorded it straight with my mic.
I went to prefrences but couldn't find anything that would help, Check all my effects in Details but turning off everything still didn't effect that troublesome chorus sound that shouldn't be there. I tried putting in "Basic Track" didn't work. "New Track" didn't get rid of the chorus sound. At first I thought i had it in the Vocal track and maybe I made it go away there but not in the acoustical guitar track.
I installed East West Silver Symphony Au plugin into GB4 a while ago. I remember I had this problem before and I made it go way. But don't know how I did it.
I took way all the volume lines Made them as low as they could go that were not used to prevent any sound bleeding!
JUst don't know what to do cause I thought I tried everything. Hopefully I didn't .
Thanks for any help! REally!

Your so right, but I can't remember what my original tempo was.
Any help would be appreciated! I think you hit the nail on the head. But now I am trying various tempos but not sure exactly what it was.
But thanks for mentioning that !!!

I really need help on this one, please!

So I'm trying to download terraria for mac, but my computer keeps telling me this can not be opened because it comes from an unidentified developer. Please help me!

Johask wrote:
But, there's no allow applications downloaded from: "Anywhere" button there.
Should be......
Having said that you can still right click and then press and hold 'Option' whilst clicking Open and gives a pass for that time.

Please I really need help with this one.

Ok I have this problem where I hook my ipod up and it works fine connects and is recognized. However, when i start trying to move music to it or transfer information using it like a jump drive it suddenly disconnects. At this point it is no longer recognized by my computer unless I restart my computer. In device manager it shows up as an unknown device and when i check the status of it, it says no device drivers installed for this device. What could be the problem here?

http://docs.info.apple.com/article.html?artnum=93499

Please help! I am trying to change my Apple Id that used to be my mother to Mine- Every time i have it changed and i go and try and do an update it continues to ask for her old password. I really need help with this!

Please help! I am trying to change my Apple Id that used to be my mother to Mine- Every time i have it changed and i go and try and do an update it continues to ask for her old password. I really need help with this!

Phil0124 wrote:
Apps downloaded with an Apple ID are forever tied to that Apple ID and will always require it to update.
The only way around this is to delete the apps that require the other Apple ID and download them again with yours.
Or simply log out of iTunes & App stores then log in with updated AppleID.

Really need help on this

Can somebody please help me read this file?
The data being read come from a file. the data looks like this
Date           Time                          X                 Y     Depth           Temp
14-Feb-05           10:08:48     3002     -2571     26     3348
14-Feb-05           10:08:48     3039     -2573     34     3345
14-Feb-05           10:08:48     3181     -2573     42     3345
14-Feb-05           10:08:49     2841     -2573     49     3342
14-Feb-05           10:08:49     2455     -2573     58     3345
the data is then read into the program in the loadData() function shown
The problem is it only reads the header. It never reads the data.public void loadData ()
// Display the open file dialog, wait for a response.
JFileChooser chooser = new JFileChooser();
int choice = chooser.showOpenDialog(frame);
// If no file was selected, bail out.
if (choice != JFileChooser.APPROVE_OPTION)
return;
// Get the file, attempt to open the file and
// read the data points.
File dataFile = chooser.getSelectedFile ();
try
Scanner input = new Scanner (dataFile);
// Loop, reading pairs of input.
     String headers = input.nextLine(); //read the headers
     //System.out.println( in);     //skip the headers to the data
while (input.hasNextInt())
     int date = input.nextInt(); //read date
     int time = input.nextInt(); //read time
int x = input.nextInt(); //read x
     int y = input.nextInt(); //read y
     int depth = input.nextInt(); //read depth
     if (!input.hasNextInt())
break;
int temp = input.nextInt(); //read temperature
graph.setDataPoint (new Point (x, y));
     graph.setDomainLabel ("x");
     graph.setRangeLabel ("Depth");*/
catch (FileNotFoundException e)
System.err.println ("Unable to read data points from " + dataFile.getName
I really need help on this crew

Can somebody please help me read this file?
The data being read come from a file. the data looks
like this
Date           Time                          X
Y     Depth           Temp
14-Feb-05           10:08:48     3002     -2571     26     3348
14-Feb-05           10:08:48     3039     -2573     34     3345
14-Feb-05           10:08:48     3181     -2573     42     3345
14-Feb-05           10:08:49     2841     -2573     49     3342
14-Feb-05           10:08:49     2455     -2573     58     3345
the data is then read into the program in the
loadData() function shown
The problem is it only reads the header. It never
reads the data.public void loadData ()
// Display the open file dialog, wait for a
r a response.
JFileChooser chooser = new JFileChooser();
int choice = chooser.showOpenDialog(frame);
// If no file was selected, bail out.
if (choice != JFileChooser.APPROVE_OPTION)
return;
// Get the file, attempt to open the file and
// read the data points.
File dataFile = chooser.getSelectedFile ();
try
Scanner input = new Scanner (dataFile);
// Loop, reading pairs of input.
String headers = input.nextLine(); //read the
e headers
//System.out.println( in);     //skip the headers to
o the data
while (input.hasNextInt())
     int date = input.nextInt(); //read date
     int time = input.nextInt(); //read time
int x = input.nextInt(); //read x
     int y = input.nextInt(); //read y
     int depth = input.nextInt(); //read depth
     if (!input.hasNextInt())
break;
int temp = input.nextInt(); //read
nt(); //read temperature
graph.setDataPoint (new Point (x, y));
     graph.setDomainLabel ("x");
     graph.setRangeLabel ("Depth");*/
catch (FileNotFoundException e)
System.err.println ("Unable to read data
ead data points from " + dataFile.getName
I really need help on this
crew
I modified the code but getting an error when I call the function
How do I catch an exception in this

Well my ipod 4th gen was updated it shut off and now when i try to turn it on it stays on the apple logo for abit then gets stuck on a white screen od blue or mixed colores i really need help fixing this plzz help :(

Well my ipod 4th gen was updated it shut off and now when i try to turn it on it stays on the apple logo for abit then gets stuck on a white screen od blue or mixed colores i really need help fixing this plzz help

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

I really need help on this 1

dear creative experts
i have a 5.1 sb live series without live drive! in kx drivers there is an option that uses the subwoofer jack out as headphone jack out, i really need help cuz' i want 2 have this option in creative drivers 2,it would be very usefull 4 me in recording sessions( multitrack ) cuz' i don't have a headphone jack on the front panel of my speakers ( teac power max 260/2 2.0 ) and every time when i want 2 record voice in multitrack i have 2 unplug the speakers and plug the headphones.
hope there is a way 2 resolve my problem...

ahh, now I understand! Thanks mate! your not disturbing by the way! thats what we're here for, to help people!
So you want to know if creatives software/drivers, allows you to change the signal on the output/input, via the creative software, so you dont have to switch it manually everytime.. Im not so familiar with creative software, but I guess if you cant find the feature yourself, then there is no actual feature on the software by creative. But a moderator/administrator, know this alot better than I do..

Please I really need help with this video problem.

Hi!
Please I need help with this app I am trying to make for an Android cellphone and I've been struggling with this for a couple of months.
I have a main flash file (video player.fla) that will load external swf files. This is the main screen.When I click the Sets Anteriores button I want to open another swf file called sets.swf.The app is freezing when I click Sets Anteriores button
Here is the code for this fla file.
import flash.events.MouseEvent;
preloaderBar.visible = false;
var loader:Loader = new Loader();
btHome.enabled = false;
var filme : String = "";
carregaFilme("home.swf");
function carregaFilme(filme : String ) :void
var reqMovie:URLRequest = new URLRequest(filme);
loader.load(reqMovie);
loader.contentLoaderInfo.addEventListener(Event.OPEN,comeco);
loader.contentLoaderInfo.addEventListener(ProgressEvent.PROGRESS,progresso);
loader.contentLoaderInfo.addEventListener(Event.COMPLETE,completo);
palco.addChild(loader);
function comeco(event:Event):void
          preloaderBar.visible = true;
          preloaderBar.barra.scaleX = 0;
function progresso(e:ProgressEvent):void
          var perc:Number = e.bytesLoaded / e.bytesTotal;
          preloaderBar.percent.text = Math.ceil(perc*100).toString();
          preloaderBar.barra.scaleX = perc;
function completo(e:Event):void
          preloaderBar.percent.text = '';
          preloaderBar.visible = false;
btHome.addEventListener(MouseEvent.MOUSE_DOWN,onHomeDown);
btHome.addEventListener(MouseEvent.MOUSE_UP,onHomeUp);
btSets.addEventListener(MouseEvent.MOUSE_DOWN,onSetsDown);
btSets.addEventListener(MouseEvent.MOUSE_UP,onSetsUp);
btVivo.addEventListener(MouseEvent.MOUSE_DOWN,onVivoDown);
btVivo.addEventListener(MouseEvent.MOUSE_UP,onVivoUp);
btHome.addEventListener(MouseEvent.CLICK,onHomeClick);
btSets.addEventListener(MouseEvent.CLICK,onSetsClick);
function onSetsClick(Event : MouseEvent) : void
          if (filme != "sets.swf")
                      filme = "sets.swf";
                      carregaFilme("sets.swf");
function onHomeClick(Event : MouseEvent) : void
          if (filme != "home.swf")
                      filme = "home.swf";
                      carregaFilme("home.swf");
function onHomeDown(Event : MouseEvent) : void
          btHome.y += 1;
function onHomeUp(Event : MouseEvent) : void
          btHome.y -= 1;
function onSetsDown(Event : MouseEvent) : void
          btSets.y += 1;
function onSetsUp(Event : MouseEvent) : void
          btSets.y -= 1;
function onVivoDown(Event : MouseEvent) : void
          btVivo.y += 1;
function onVivoUp(Event : MouseEvent) : void
          btVivo.y -= 1;
Now this is the sets.fla file:
Here is the code for sets.fla
import flash.utils.Timer;
import flash.events.TimerEvent;
var video:Video;
var nc:NetConnection;
var ns:NetStream;
var t : Timer = new Timer(1000,0);
var meta:Object = new Object();
this.addEventListener(Event.ADDED_TO_STAGE,init);
function init(e:Event):void{
video= new Video(320, 240);
addChild(video);
video.x = 80;
video.y = 100;
nc= new NetConnection();
nc.connect(null);
ns = new NetStream(nc);
ns.addEventListener(NetStatusEvent.NET_STATUS, onStatusEvent);
ns.bufferTime = 1;
ns.client = meta;
video.attachNetStream(ns);
ns.play("http://www.djchambinho.com/videos/segundaquinta.flv");
ns.pause();
t.addEventListener(TimerEvent.TIMER,timeHandler);
t.start();
function onStatusEvent(stat:Object):void
          trace(stat.info.code);
meta.onMetaData = function(meta:Object)
          trace(meta.duration);
function timeHandler(event : TimerEvent) : void
if (ns.bytesLoaded>0&&ns.bytesLoaded == ns.bytesTotal )
            ns.resume();
            t.removeEventListener(TimerEvent.TIMER,timeHandler);
            t.stop();
The problem is when I test it on my computer it works but when I upload it to my phone it freezes when I click Sets Anteriores button.
Please help me with this problem I dont know what else to do.
thank you

My first guess is you're simply generating an error. You'll always want to load this on your device in quick debugging over USB so you can see any errors you're generating.
Outside that, if you plan on accessing anything inside the SWF you should be loading the SWF into the correct context. Relevant sample code:
var context:LoaderContext = new LoaderContext();
context.securityDomain = SecurityDomain.currentDomain;
context.applicationDomain = ApplicationDomain.currentDomain;
var urlReq:URLRequest = new URLRequest("http://www.[your_domain_here].com/library.swf");
var ldr:Loader = new Loader();
ldr.load(urlReq, context);
More information:
http://help.adobe.com/en_US/ActionScript/3.0_ProgrammingAS3/WS5b3ccc516d4fbf351e63e3d118a9 b90204-7de0.html
If you're doing this on iOS you'll need to stripped SWFs if you plan on using any coding (ABC) inside the files. You mentioned iOS so I won't get into that here, but just incase, here's info on stripping external SWFs:
http://blogs.adobe.com/airodynamics/2013/03/08/external-hosting-of-secondary-swfs-for-air- apps-on-ios/

Really need help with this!

I have a form to upload pictures, create a thumbnail, and put
them in folders. I really need to know how to put the links in a
database with php so I can display them on a page with the other
fields! PLEASE HELP!!

stone_cutter wrote:
ok, if i was the computer, i would first, find the first occurence of the letter "V" in the word,Okay, good. How would you do that? You did look at the docs others pointed you to, right?
and then include all the subsequent characters.Okay, good. How would you do that? You did look at the docs others pointed you to, right?
I know what to do, i just don't know the codes for them.The idea is that you figure out "the codes." This generally means taking a guess at an approach that you think will work for one of the steps, writing some code, testing it, seeing if it produces the output you expect, figuring out why it didn't, changing it, repeating until you get it right, moving on to the same process with the next very small piece, and so on, until each piece works by itself, then putting the pieces together, and testing and tweaking until it works.
I know the code is gonna start with m = p.substring Why?
Why substring?
Why immediately m = ?
You don't think there will be any intermediate steps?
What you're doing here, rather than following the process I describe above, is grabbing a handful of buzzwords that you think apply, slapping them together, then throwing your hands in the air and crying, "I don't get it."
Where are the String API's? Can someone give me the link to them?I think they already did, more than once.
http://java.sun.com/j2se/1.5.0/docs/api/java/lang/String.html

Really need help with this, can't use safari on my ipod

I clicked on a link on a website for my school, and then it opened in another page. idk if i clicked something or this happened on its own, but then a video tried to open from the image. I've messed around with my settings, and i can't seem to be able to get a youtube video to open on my ipod if it's from a website, i always have to go directly from youtube to find anything. So it says "could not load video", the only option is to click okay, so I do, and then it gives me the main ipod youtube page, with history and search and all that stuff. I give up and decide to just look at something else, and click safari, except it goes straight to the image, which goes straight to the unloadable video on another program, and then i have to close the page. It goes in circles, but it means that safari is unusable, and my computer is broken, so i really need it for internet.
Also, is there a way to make youtube videos viewable from a website link?
And why, when I search up a popular song on youtube on my ipod, and type in that i want the lyric video, i only get live versions, and there is never any lyric videos, and i usually detest live versions of songs?? and then when i search the same thing on someone's computer, i get my lovely lyric videos? Is Youtube angry at Apple or something?
aand why were the older ipods less crash-prone?
answers are very helpful, especially for the first question, because i am clueless about technoloy. Honestly, it took me a year to learn how to turn on my computer....

A lote of sitesuse the Flash version of YourTube. no iOS devices support flash. The you have to either use the YourTube app or Safari to go to YouTube since Safari tells the YouTube site to use HTML5.
For other problems withwith Safari try going to Settins>Safari and clear Histor, Cookies and Data.
Also reset the iPod. Nothing is lost.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.

Hey guys i really need help with this problem...

Hey guys how is everyone? I have a Soundblaster X-Fi XtremeMusic. and i am having a real annoying problem, here is how it all started. I took the time and dusted out my computer by using a can of air duster, and i think a little got on there and it turned into frost. Weird thing is it happened before and i never had this problem. I turn my computer on and crank the volume up i receive no sound what so ever. I know it has to work because i have a pair of DJ headset hooked into the jack, and i heard a little pop sound. And no audio, every last port on the card i cannot get no sound out of it except one of them, it's really annoying i hate this doing this and i have to hook my 5.1 using one jack just to get sound. And it doesnt sound good i have some really powerful 1,000 watt speakers with 2 amps. I know this is yet due to the fact i only have the lime jack in This is the only way it'll work. And i have a THX cable and it works sometime. I hope my soundcard isnt messed up. I really hope you guys can help me with this issue. I cannot contact creative cust service via email because i dont have my box no more, and my serial number is faded on the card (i think that was the serial)
I try to explain the best way i can describe it. Below is my System Specs.
<pre>Processor: AMD Athlon X3 425 @ 2.7GHz
Video Card: ATI HD 5770 1GB
Hard Drive:1TB Western Digital, 500GB Western Digital, 300GB Seagate (all SATA connections)
Heatsink: Zalman CNPS7000C-Cu
Power Supply: Antec 550 Watts True Power II
Sound Card: Creative Soundblaster XI-FI Xtreme Music
Motherboard: ASUS M4A79XTD EVO
DVD Drives x2. Plextor DVD-RW/DL/ Sony DVD-ROM Drive via PATA connections</pre> Thanks in advance hope you all have a splended weekend.

Hello
Thank you for your help but unfortunately still have troubles with the soundcard.
I upgraded my system to
RAM: Corsair Vengeance LP 16GB DDR3
Processor: AMD Phenom II X6 1090T Processor, Black Edition 3.3GHz
Video Card: Sapphire 100314-3L Radeon HD 6870 1GB
Hard Drive: 1TB Western Digital, 500GB Western Digital, 300GB Seagate (all SATA connections)
Heatsink: Zalman CNPS7000C-Cu
Power Supply: Corsair TX850W 850 Watt SLI/Crossfire Certified
Sound Card: Creative Labs Soundblaster X-FI Titanium Fatal1ty Professional (getting this soon)
Motherboard: ASUS M4A79XTD EVO (BIOS: 2102)
DVD Drive(s): Plextor DVD-RW/DL/ Sony DVD-ROM Drive via PATA connections
And i still run into problems i think its a matter of a hardware issue. The plugs dont really work
only one does (where lime goes in) And the bass has toned down as well... Isn't as powerful
as it used to be, so my best be is to upgrade to Creative Labs Soundblaster X-FI Titanium Fatal1ty Professional
Thats my only hope...
But again thank you for your help

REALLY need help on this one... befw11s4 w/ Xbox 360

Similar Messages

Maybe you are looking for