Realtek ALC656 Audio will this support 16 bit recording
I have a hp Pavillion HPE h8-1017c desktop with integrated realtek ALC656 audio, running windows 7 home premium 64 bit.
will this audio support 16 bit recording? Or am I asking the correct questions?
Chux
Chux, welcome to the forum.
What exactly are you trying to do? This will help us determine if the Integrated Sound card will do what you need.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.
Similar Messages
-
i have a wireless isp giving the internet connection.
will that work in the AEBSn. He is telling that the speed is 512 kbps and it is wan..
now the question is will that go in AEn..and will that work..thanks! i have ethernet signal from my isp and he is giving wan! and the speed is 512kbps.. will that support.
the thing is if i give direct connection to my computer it is working..!
is this ok! -
UC520 - will this support 7960G phones
I am trying to get clarification if the Cisco 7960G phone which are currently end of life are supported with the UC500 series.
Hello.
Yes, the x7960 works with the UC520.
For transparency, here's the output of the load command on a UC520 running current sw.
Hope this helps.
Adam
UC520(config-telephony)#load ?
12SP 12SP+ and 30VIP phones
301 Cisco IP Phone SPA301
303 Cisco IP Phone SPA303
501G Cisco IP Phone SPA501G
502G Cisco IP Phone SPA502G
504G Cisco IP Phone SPA504G
508G Cisco IP Phone SPA508G
509G Cisco IP Phone SPA509G
521G-524G Cisco IP Phone CP-521G/524G
525G Cisco IP Phone SPA525G
525G2 Cisco IP Phone SPA525G2
6901 Cisco IP Phone 6901
6911 Cisco IP Phone 6911
6921 Cisco IP Phone 6921
6941 Cisco IP Phone 6941
6961 Cisco IP Phone 6961
7902 Cisco IP Phone 7902
7905 Cisco IP Phone 7905
7906 Cisco IP Phone 7906
7910 Cisco IP Phone 7910
7911 Cisco IP Phone 7911
7912 Cisco IP Phone 7912
7914 Cisco IP Phone 7914 14-Button Line Expansion Module
7915-12 Cisco IP Phone 7915 12-Button Line Expansion Module
7915-24 Cisco IP Phone 7915 24-Button Line Expansion Module
7916-12 Cisco IP Phone 7916 12-Button Line Expansion Module
7916-24 Cisco IP Phone 7916 24-Button Line Expansion Module
7920 Cisco IP Phone 7920
7921 Cisco IP Phone 7921
7925 Cisco IP Phone 7925
7931 Cisco IP Phone 7931
7935 Cisco IP Conference Station 7935
7936 Cisco IP Phone 7936
7937 Cisco IP Conference Station 7937
7941 Cisco IP Phone 7941
7941GE Cisco IP Phone 7941GE
7942 Cisco IP Phone 7942
7945 Cisco IP Phone 7945
7960-7940 Cisco IP Phone 7940/7960
7961 Cisco IP Phone 7961
7961GE Cisco IP Phone 7961GE
7962 Cisco IP Phone 7962
7965 Cisco IP Phone 7965
7970 Cisco IP Phone 7970
7971 Cisco IP Phone 7971
7975 Cisco IP Phone 7975
7985 Cisco IP Phone 7985
ata ATA phone emulation for analog phone -
Error message occurs when I try to install Realtek HD Audio driver on Satellite M70
Microsoft Bus Driver should be loaded in your system before installing Realtek HD Audio Driver
This is the error message that I got when I tried to install the original Realtek drivers! Removed/installed the new WXP media center 2005, everything was fine but the modem and the sound, for the modem no problem but for the sound...(sight) I even downloaded new drivers on the internet and THEY WORKED!
But when I try next time to open my computer I get all the time a blue screen then it shuts down? What is wrong? I got everything original and I followed the step. What should I do?
By the way I got an Satellite M70 - 168 laptop.Hi
Someone get this similar error message on his notebook OSs and according to the information the Microsoft patch should helps to sort it out.
Found this useful knowledge base article:
http://support.microsoft.com/default.aspx?scid=kb;en-us;835221
This document advice to install the KB835221 patch but that is only officially available by talking to Microsoft technical support!
But dont worry buddy. The Google search engine is the key!
Try to search for this KB835221 patch and Im sure you will find the right one!
The required UAA drivers in the Microsoft documents are not included with XP SP2 or SP1, so it's a useful QFE to have around if you want to use newer sound cards like the Realtek HD Audio.
PS: If the Q835221 didn't help then you can also try the updated driver from Microsoft Q888111 article, which has 4 versions depending on your OS and installed service pack.
Good luck!
Message was edited by: Jayjay -
M-Audio won't support 10.4.10
I have a M-Audio Revolution 7.1 card. since updating to 10.4.10 the card is not recognized. Spoke with M-Audio tech and he said M-Audio will not support past 10.4.6!!!! suggested I reinstall 10.4.6?
I have a M-Audio Revolution 7.1 card. since updating to 10.4.10 the card is not recognized. Spoke with M-Audio tech and he said M-Audio will not support past 10.4.6!!!! suggested I reinstall 10.4.6?
-
HOW TO FIX IT, GARAGE BAND FOUND AUDIO FILES IN 8 BIT FORMAT. THIS FORMAT IS UNSUPPORTED AND CANNOT BE PLAYED
Hi..
Post your topic in the GarageBand community > GarageBand for Mac: iLife: Apple Support Communities
More GB users will see your post there. -
Realtek HD audio problem when recording
Hello guys;
Been trying to do some recording for the first time since the OC was rebuilt. New specs as below.
(By the way, I couldn't get any sound at all until I reinstalled the UAA bus driver..., so it's thanks to this forum that I got sound in the first place!)
Anyway, the problem I now have is that basically the record level is way too high. I use Steinberg Clean 5.0 and was finding that although I could change the levels in the software, whatever level I recorded at I was suffering extreme amounts of clipping/distortion. (I should mention that the input is from a good quality hifi, I used it for many years for recording with my previous PC incarnation using my KT6 delta rig).
After much trial and error, I found that the only way to stop this is to have the recording sound level in volume set to - well it isn't numbered - it would be about 10%. I also discovered that although master recording level is adjustable the others - CD, mic, line, mix are greyed out.
The master level is really difficult to set (as I write I just discovered it's still distorting and I'll have to edged it down another couple of % towards zero), so I really want to change the "line" record level, but as I said it's greyed out.
In Realtek sound manager it's similar, in the record section there's an overall level control but no individual adjustments for record, only playback.
Incidentally playback works just fine!
Realtek drivers are latest 5.10.0.5928 downloaded yesterday from Realtek.
Anyone got any ideas please?
Andrew
Antec Sonata 2 case with 450w Smartpower PSU
+5V, 30A; +3.3V, 32A; +12V, 15A + 17A; -12V, 0.3A; -5V, 2A
MSI P43NEO-F
IntelE7400
4GB OCZ RAM
MSI ATI HD4650 1GB
120, 160, 500GB HDDs
2 optical drives
Etc
Windows XP Home SP3Quote from: hu479as on 15-September-09, 04:10:19
I think the audio out must be fine as it works just fine for general listening to CDs, LPs (!!), whatever played from the hifi. No distortion even with volume level (in "volume control") set at 100% It's only the record level that's weird :-)
I'll try the headfone thing later, just trying to record something now!
Sorry, I'm not sure if this will help, as I haven't used Realtek HD audio for some time (always used add-in cards). But in my experience, most sound controllers have an option in mixer to select the recording source (e.g. Mic In, Line In, S/PDIF-In, Wave, CD, etc). In particular, many offer a recording source option for "What you hear" or "Stereo Mix". Essentially, this would combine and capture the audio from every available source, rather than from just a single source. I'm guessing it's a long shot but maybe you could change your recording source to this "mix" type (hopefully, something similar is available). To reduce noise you'll probably want to MUTE other sources (Wave, MIDI, CD, etc.), though you could leave them enabled as well (try to avoid things that would inject noise).
I'm only suggesting this approach because you mention that the playback from your hifi is completely fine. Only recording from line-in is distorted. So perhaps, you can work around the problem by recording the mixed playback. It shouldn't make any sense for this to be happening but maybe you'll be lucky?? My (worst-case) thought is that maybe your realtek HD's ADC is damaged and therefore playback is flawless but recording is flawed...
Another thought I had is mixer settings are often stored within an ini file. If you or someone else could identify the file(s), then you should be able to view, and in turn, modify the numeric playback and recording levels. That should aide you in adjusting the levels more precisely, rather than guessing levels via the obscure gui sliders.
It may turn out that none of my ideas are helpful, but I wish you good luck all the same. -
Get a message on Itunes to uninstall and re-install Itunes since " Apple Application Support is required" Will this cause me to lose all records? Is there some to avoid this have tried to repair No LUCK
Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you? If so, does iTunes launch properly now?
If instead you get an error message during the install, let us know what it says. (Precise text, please.) -
Anyone know when DS will be supported as 64 bit app on Linux?
Anyone know when DS will be supported as 64 bit app on Linux?
Thanks, MikeIt appears on the App store when I open it on my iPhone. Haven't tried installing it as the reviews are rather unflattering at this point, but at least it looks like it should be installable...
-
If win 7 64 bit will not support Firefox 10 why offer it
I have just read that you will not support 64 bit win 7 O/s so why am I being offered it twice now to be honest.
you are correct this M/C is 32 bit but not my other one which is 64 bitFirefox Nightly it is not in the Release channel (Release channel: This is the standard version where the majority of users, including you are. It's fully tested and stable).
Nightly channel: is the most unstable and buggy one. It's where all the tests are performed.
so you can not see it in your update options.
thanks again -
I'm moderating a competition which will be about 8 hours long. I need to have a video/audio recording of the whole thing in case an answer is contested.
We will need to stop recording and access the footage as the day progresses. Any suggestions as to how best to accomplish this? I have an iPad and a Macbook Air.
Many thanks!I'm moderating a competition which will be about 8 hours long. I need to have a video/audio recording of the whole thing in case an answer is contested.
We will need to stop recording and access the footage as the day progresses. Any suggestions as to how best to accomplish this? I have an iPad and a Macbook Air.
Many thanks! -
HT1588 when i play a movie in itunes the audio will work for a little bit then stop
when i play a movie in itunes the audio will work for a little bit then stop
Hi there,
I would recommend taking a look at the troubleshooting steps found in the article below.
Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
http://support.apple.com/kb/TS1718
-Griff W. -
HT5675 will this fix the sound problem? my audio always crashes on browser
if i leave chrome or skype open for a day, the audio will stop working alltogether, then i have to force quit app
I am in the same situation. I've been given the okay to purchase Acrobat 3D. It worked very well with SW2007. I've since upgraded to SW2008 SP3.1 (Vista 64). Now Acrobat won't convert or capture the SW2008 SP3.1 files. The error states that the format isn't supported. I can still convert my SW2007 files, but that doesn't solve the problem
I think Adobe has fallen behind and CAD software companies aren't allowing you to save to earlier versions anymore. I don't intend to purchase Acrobat 3D until this problem is dealt with. I'm not holding my breath. -
i have purchase an iphone. but no audio and video are available with it .can i record video and audio by this device
<Personal Information Edited by Host>Hello JessCastle,
Start with the article below to troubleshoot issues with the microphone on your iPhone. If none of it works then contact Apple Support to further help you out.
If your voice is too faint or sounds unclear using iPhone, or iPod touch
http://support.apple.com/en-us/HT203792
Take it easy,
-Norm G. -
When on FaceTime, the screen will suddenly reeze for a few seconds as well as the audio. This happened to everyone I have talked to on FaceTime. Any suggestions to keep this from happening?
Hey everyone in Apple world!
I figured out how to fix the flashing yellow screen problem that I've been having on my MBP! Yessssss!!!
I found this super handy website with the golden answer: http://support.apple.com/kb/HT1379
I followed the instructions on this page and here's what I did:
Resetting NVRAM / PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
I went through the 6 steps above twice, just to make sure I got rid of whatever stuff was holding up my bootup process. Since I did that, my MBP boots up just like normal. No flashing yellow screen anymore!!
(Note that I arrived at this solution when I first saw this page: http://support.apple.com/kb/TS2570?viewlocale=en_US)
Let me know if this works for you!
Elaine
Maybe you are looking for
-
Monitor has HDMI--can I use it?
Bought a 22" monitor that has HDMI and VGA inputs. Its a refurbished Famous Maker (HP) TS22W7H 22-inch LCD Vivid Color Widescreen Height & Pivot Adjustments w/ HDMI. I dont want to use the VGA. Is there a way to hook up the HMDI? Help. Thanks Steve
-
Dear Sir, We are facing one problem related to Service-Tax Availment as per below details : Say we place the Purchase Order for some Service and Vendor submitted the Invoice after the Service Execution . Just After the MIRO , the Service-Tax is gett
-
hello all, where can i get a list of good reports covering SD scenarios? as in any website dedicated to this? Please help me out. hope to hear from u ppl, Thanks, me
-
ITunes Copy to library and Keep organised settings not working properly.
Hi - I use an external disk array for my library and have always had the preferences for "Copy files to itunes Media folder when adding to library" & "Keep itunes Media folder organised" since I started using iTunes. 99% of the time this works fine.
-
Startup error message:System Events got an error: NSInternalScriptError (8)
I just upgraded from Panther to Tiger on my mac Mini and I can't seem to get rid of this message everytime I boot up: System Events got an error: NSInternalScriptError (8) Any idea how I can "fix" this? Much thanks.