Realtek8139 on Solaris 8 (x86) post driver install

I installed the realtek drivers (1.03A) and everything
seems to work correctly. Dmesg shows that it detects
the nics (2) and shows their mac addresses. But upon a
ifconfig -a, only the lo is displayed. Neither realtek
shows up.
What could i be missing?
thanks,
J

# sys-unconfig
WARNING
This program will unconfigure your system. It will cause it
to revert to a "blank" system - it will not have a name or know
about other systems or networks.
This program will also halt the system.
Do you want to continue (y/n) ? y
Then reboot and reconfig.

Similar Messages

  • Solaris 10 x86 shared drive mount issues

    I have an XP installation, a recently-installed Solaris 10 x86 partition, and a FAT32 partition shared between them.
    The issue is this:
    When I have /share mounted (using mount -o rw) and listed in the /etc/vfstab, the super-user owns everything and can write there. No other user can own a file or write anything on that partition. I've been getting a "chown: invalid argument" type message on every attempt.
    Any ideas?
    Thanks in advance.

    Just an update, I just reloaded the server with Solaris 9 x86 and the same problem on it as well. Now I am not 100% that this card/drive configuration did work on solaris 9 before, maybe it was a different SCSI card.
    The server has been loaded with Windows Server and it works ok on that, so I know that the card/drive combination works ok, just not with Solaris.
    Any ideas anyone ? Do I need a different SCSI adapter ?

  • Solars 10 x86 1/06 install problem - empty bootloader

    Hi,
    I'm trying to install 1/06 on a noname AMD X2, on a SATA disk. Had the previous version installed without problems, but 1/06 wouldn't show any options in GRUB. After booting from DVD, GRUB shows me the version number, no options to choose from, and the GRUB prompt. Tried on different machines the same on all.
    Any help would really be appreciated.
    cheers
    cray

    Looks like Solaris 10 x86 1/06 GA has got an issue with GRUB. I've downloaded Solaris Express (nv-b27a) CD-isos, now GRUB & the installation are working fine. Just wondering if I was the only one having this issue (as I've tested it on 3 different machines and on VPC it most likely wasn't a HW-issue).
    Cheers
    cray

  • Solaris 10 x86 failed to install

    Hi, I downloaded Solaris 10 x86 a few weeks ago.
    I tried installed on a 32-bit old PC and it worked great.
    I just got a new box. It is an AMD Athlon64 3000+ CPU/motherboard.
    When I put the disk in, it loaded the installation assistant
    and gave me this error message almost right away:
    error: 64 PCI bit len unsupported
    Is there any way I can install Solaris x86 on it? Or is my
    CPU not on the supported list?
    Thanks
    --Vincent                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

    Pl identify which version of Oracle you are trying to install. Check the Install Guide for your version to determine the minimum hardware/software requirements.
    http://www.oracle.com/technology/documentation/index.html
    HTH
    Srini

  • Solaris 10 x86 Jumpstart unassisted install

    How do you get a Solaris 10 x86 jumpstart to actually work?!?! Everytime I try to jump an X4500 it will go into an assisted solaris install. It reads my sysidcfg and the majority of my profile. But I have to sit and manually enter the partition information. I've tried multiple variations of "install dhcp" and "nowin" in the boot options to no avail.

    Here is the error output:
    # ./add_install_client -i 192.168.1.51 -c sun1:/jumpstart/ -p sun1:/jumpstart/Sysidcfg/Solaris_10-intel/ host2 i86pc
    unmount: warning: /tftboot/I86PC.Solaris_10-1 not in mnttab
    unmount: /tftpboot/I86PC.Solaris_10-1 no such file or directory
    mount: Mount point /tftboot.I86PC.Solaris_10-1 does not exist.
    cleaning up preexisting install client "host2"
    removing host2 from bootparams
    rm: /tftboot/ is a directory
    updating /etc/bootparams
    ln: cannot create /tftpboot//pxegrub.I86PC.Solaris_10-1: File exists
    Create a grub boot flloppy and edit GRUB menu to contain
    the following entry:
    title Solaris netinstall
    rarp
    kernel /I86PC.Solaris_10-1/multiboot kernel/unix -B install_media=192.168.1.100:/jumpstart/OS/intel
    module /I86PC.Solaris_10-1/x86.miniroot
    ------------- end ---------------
    So, I have tried this with the -i, -e -i+-e, with -s and without.
    I have an entry in /etc/ethers and /etc/hosts. However, I don't think it is a FQDN or simular issue. Looks like a script issue.
    /tftpboot/ ends up with
    boot/
    nbp. -> pxegrub.I86PC.Solaris_10-1
    pxegrub.I86PC.Solaris_10-1
    rm.192.168.1.51
    /tftpboot/boot/
    grub/
    /tftpboot/boot/grub/
    menu.1st
    # cat menu.1st
    default 0
    timeout=30
    title Solaris_10 jumpstart
    kernel /i86PC.Solaris_10-1/multiboot kernel/unix -B install_config=192.168.1.100:/jumpstart,sysid_config=192.168.1.100:/jumpstart/Sysidcfg/Solaris_10-1-intel/,install_media=192.168.1.100:/jumpstart/OS/intel
    module /I86PC.Solaris_10-1/x86.miniroot
    ---- end ----
    Thanks for the help.
    Aaron

  • Solaris 8 x86: How to install on disk connected via IDE controller

    I have a PC with a Pentium 4 processor and the following IDE disks:
    Disk 1 and 2 at the primary IDE bus.
    Disk 3 connected via Promise Ultra 133 IDE controller.
    I want to install Solaris 8 Intel x86 edition on Disk 3, but the installation
    program only lists disks 1 and 2 as locations for install.
    Is there any method how to get Solaris 8 installed on Disk 3?
    Thank you very much for your help!
    Thomas

    Hello Michael,
    thanks for the information.
    There is no support for the Promise Ultra 133 IDE controller listed.
    Also, searching the internet for a private developed driver was not
    successful.
    Anyway, I have tried to make a test installation on a hard disk
    connected to the primary IDE controller and I detected a lot of
    further installation problems with my equipments because of
    missing or not properly identified drivers.
    So I think I have to make further investigations on concepts
    how to get Solaris 8 run in the best way.
    Thanks again for your help,
    Thomas

  • Solaris 8 x86 won't install

    Please for give my ignorance, I know nothing about unix. I am taking a course on Solaris fundementals in a couple of weeks and I am trying to get a jump on the class by having a working version by the time it starts.
    I just DL'd the CD images and burned the disks. I get to the part of the install where it leaves the command line and gets to the shell/window phase.
    A message comes up stating:
    "No disks that meat the criteria in the Solaris installer documentation found
    Please check the system or try another instalation option"
    The PC I am attempting to install onto is made of pretty common components: Celeron II 533, Asus BX-133, 576 Megs PC-133 SDRAM, 3dfx voodoo 3 PCI, 3C905, 2 Wester Digital Hard Drives and a HiVal 52X CDROM.
    The system has previously had Windows 2000 and Redmond Linux on it and they both ran with no problems. I used dos fdisk to remove the linux partitions before attempting to install Solaris.
    Any suggestions?
    Thanks, Chris

    Haha, I know that problem that allmost made me go crazy when I tried it again and again...
    I think you tried booting from the Solaris installation CD did you?
    Try booting from Solaris CD 1 / 2.
    That worked without any problems for me even though I have a SCSI RAID System and thought that controller caused the problems.
    And: Remove any partition on the harddrive before you install.
    Regards
    capa

  • Solaris 8 x86 and 10 x86 differences

    I have a device driver that works on Solaris 8 x86. I installed this same device driver on a box with Solaris 10 x86. Under Solaris 10 x86 I get a message "WARNING: minor name <tec
    _0> is not compatible network driver name <tec>". Also, opening the device under Solaris 10 x86 will cause the OS to quit responding. Where can I find a list of differences between Solaris 8 x86 and Solaris 10 x86?
    Thanks.
    David

    Another way to install Matrox G550 is to Install AcceleratedX from www.xig.com
    It supports a lot of graphic card and it also supports hardware acceleration for OpenGL
    BUt obviously its not free :(

  • Intel network interface with Solaris 10 x86

    Hi,
    I have been Googling all evening to try and find a solution to this, but here is the problem:
    I have a PC built around an Asus P4C800-E system board, and I have Solaris 10 x86 01/2006 installed. I would like to get the Ethernet interface (Intel adaptor, running on a CSA bus) up and running - but for some reason I can't seem to get the driver to bind to the proper address (pci8086,1019 - from what I have been able to find out): It instead insists on binding to pci1043,80f7. Even though pci8086,1019 is listed in /etc/device_aliases, it won't play nice.
    I know the NIC is working, and have tried it under other OSes (including Linux).
    Although Solaris x86 "sees" something there, and the interface is plumbed (it can even tell when the network link is up or down), I can't get the interface to work - pings do not work, etc.
    Is there a way I can convince the driver to bind to pci8086,1019 instead of pci1043,80f7?
    Any assistance would be greatly appreciated.
    Joovilhar.

    <table border="0" align="center" width="90%" cellpadding="3" cellspacing="1"><tr><td class="SmallText"><b>Joovilhar wrote on Wed, 08 March 2006 02:14</b></td></tr><tr><td class="quote">
    I can't seem to get the driver to bind to the proper address (pci8086,1019 - from what I have been able to find out): It instead insists on binding to pci1043,80f7. Even though pci8086,1019 is listed in /etc/device_aliases, it won't play nice.
    </td></tr></table>
    Is 1043,80f7 the device's pci subsystem vendor and subsystem device id?
    And 8086,1019 is the normal vendor/device id?
    In this case everything would work as expected.
    What is listed by "/usr/X11/bin/scanpci -v" for the ethernet controller?
    <table border="0" align="center" width="90%" cellpadding="3" cellspacing="1"><tr><td class="SmallText"><b>Quote:</b></td></tr><tr><td class="quote">
    I know the NIC is working, and have tried it under other OSes (including Linux).
    Although Solaris x86 "sees" something there, and the interface is plumbed (it can even tell when the network link is up or down), I can't get the interface to work - pings do not work, etc.
    </td></tr></table>
    Try to boot the kernel with various settings of the "acpi-user-options" variable,
    to disable / enable ACPI. In previous Solaris x86 releases, when
    something went wrong configuring an interrupt vector for a nic device,
    the typical end result is a nic that is unable to receive incomming
    packets. Maybe your Asus P4C800-E is still problematic with ACPI, with
    S10 x86 1/2006, and needs the acpi-user-options workaround.
    http://blogs.sun.com/roller/page/danasblog?anchor=configurin g_solaris_acpi_at_boot
    To change the "acpi-user-options" variable, edit the grub boot command
    line and edit the "multiboot" line, e.g. append "-Bacpi-user-options=0x2".

  • Java upgrade over solaris 10 x86 32 bit for weblogic installation

    Hi All I need to install weblogic over solaris 10 x86, for that i need following configuration :-
    JDK Sun Java 2 JDK 6.0 Update 05 with the Java HotSpot™ Client and Server
    VMs (32-bit) and all later service packs of 6.0
    How can i update this java over solris or is it actually required.Can someone please help??
    Sharad

    I have solaris 10 x86 32 bit installed over my system and i have got this weblogic installer :-
    Oracle WebLogic Server 11gR1 (10.3.4) Generic and Coherence V24338-01 1.1G
    Would it be gud. or i would need something else. Actually thing is I am having windows machines over which i have installed solaris 10 x86 running over VM ware, i also upgraded java to 7 update. Now would it go fine with the mentioned file or I am going wrong somewhere,
    Please suggest as i am running out of resources here.
    Thanks in advance.

  • Several mysterious problems with Solaris 11 x86 install

    Hi folks,
    I've recently installed Solaris 11 x86 as a replacement for Solaris 9 SPARC on an Ultra 2 machine. I like the operating system, but I've promptly acquired some mysterious problems. The computer is a Fujitsu Siemens Esprimo E2500 with a Pentium 4 HT 3.06 GHz processor, 2 GB RAM, an 80 GB SATA disk and a 147 GB SCSI disk.
    I have had a few occasions on which the screen goes totally blank, the monitor claims that there is no signal, and I have to restart the machine. However, with the blank screen, the hard drive activity light is sometimes still flashing. This happens predictably when I try to log off (as opposed to shutting down) and when I use Totem media player and click on anything inside the Totem window. The motherboard has built-in graphics and brief specifications can be found here:
    http://uk.ts.fujitsu.com/rl/servicesupport/techsupport/professionalpc/ESPRIMO/Datasheets/ds_esprimo_edition_e2500.pdf
    Yesterday my PS/2 keyboard started causing the motherboard to beep crazily when I use it. It beeps rapidly 4 times, then prints the expected character. However, the problem doesn't occur at the initial log in screen. The mouse cursor has also gone beserk on one occasion, flying all over the screen (I had this problem with a previous PC, but a different OS, and thought it was a hardware fault, which I why I got this new computer). With the keyboard problem, the machine is basically unusable. However, it is configured as a dual boot machine, and the keyboard problem isn't present with Windows XP.
    There are also a few smaller, odd problems. Occasionally all the icons vanish from my Gnome desktop. The command prompt also mysteriously changed from $chris@pluto to $bash-4.1 just before the keyboard problem appeared, although that might have had something to do with me copying my home directory to a different disk and editing the /etc/auto_home file (moving the home directory worked fine). Also, unlike with Solaris 9 SPARC, I find that I have to have external SCSI devices switched on at boot time, should I want to use them later. That's a pain. With Solaris 9, I could run "boot -r" when I first attached the device, then switch on the SCSI devices and mount them whenever I wanted.
    After the useful advice I received here about "more" and "less", I thought I'd post these problems and see if anyone can help. I'd really appreciate some advice. Can anyone identify likely causes for these problems? Which problems can I expect to solve and which do I have to live with?
    Many thanks,
    Chris Tidy
    Edited by: Chris Tidy on 23-Mar-2012 03:36

    Hi folks,
    I've recently installed Solaris 11 x86 as a replacement for Solaris 9 SPARC on an Ultra 2 machine. I like the operating system, but I've promptly acquired some mysterious problems. The computer is a Fujitsu Siemens Esprimo E2500 with a Pentium 4 HT 3.06 GHz processor, 2 GB RAM, an 80 GB SATA disk and a 147 GB SCSI disk.
    I have had a few occasions on which the screen goes totally blank, the monitor claims that there is no signal, and I have to restart the machine. However, with the blank screen, the hard drive activity light is sometimes still flashing. This happens predictably when I try to log off (as opposed to shutting down) and when I use Totem media player and click on anything inside the Totem window. The motherboard has built-in graphics and brief specifications can be found here:
    http://uk.ts.fujitsu.com/rl/servicesupport/techsupport/professionalpc/ESPRIMO/Datasheets/ds_esprimo_edition_e2500.pdf
    Yesterday my PS/2 keyboard started causing the motherboard to beep crazily when I use it. It beeps rapidly 4 times, then prints the expected character. However, the problem doesn't occur at the initial log in screen. The mouse cursor has also gone beserk on one occasion, flying all over the screen (I had this problem with a previous PC, but a different OS, and thought it was a hardware fault, which I why I got this new computer). With the keyboard problem, the machine is basically unusable. However, it is configured as a dual boot machine, and the keyboard problem isn't present with Windows XP.
    There are also a few smaller, odd problems. Occasionally all the icons vanish from my Gnome desktop. The command prompt also mysteriously changed from $chris@pluto to $bash-4.1 just before the keyboard problem appeared, although that might have had something to do with me copying my home directory to a different disk and editing the /etc/auto_home file (moving the home directory worked fine). Also, unlike with Solaris 9 SPARC, I find that I have to have external SCSI devices switched on at boot time, should I want to use them later. That's a pain. With Solaris 9, I could run "boot -r" when I first attached the device, then switch on the SCSI devices and mount them whenever I wanted.
    After the useful advice I received here about "more" and "less", I thought I'd post these problems and see if anyone can help. I'd really appreciate some advice. Can anyone identify likely causes for these problems? Which problems can I expect to solve and which do I have to live with?
    Many thanks,
    Chris Tidy
    Edited by: Chris Tidy on 23-Mar-2012 03:36

  • Solaris 10/X86 install appears to have destroyed my display.

    Hello folks -
    I'm new here, I searched and did not find anything that matched so I'm posting. If I'm asking about something previously covered, please be patient, I'll learn.
    I am running an Asus A7N8 Deluxe motherboard with an Athlon 2800+, standard ATA/133 drives and an Nvidia 6800 AGP supplied by PNY. My display is a Viewsonic VA2012wb, which I've since learned is only available at a well-known warehouse membership store.
    I've been using this setup under XP for some months now, and yesterday I decided to try and install Sol10/X86 again now that some new drivers are available that support my onboard LAN. Nothing untoward happened during the install (I'm very familiar with the process on Sparc hardware), and I was asked to reboot so I could start installing CD2.
    Suddenly, no display on boot. Troubleshooting ensued, and I found that I was able to get the monitor to display if I connected the VGA cable instead of the DVI interface I've successfully used all this time.
    Subsequent troubleshooting included:
    1. Changing out the 6800 with a 6200 I had on hand.
    2. Booting to XP to see if the Nvidia Twinview stuff had become confused - The Nvidia software behaved as if there was nothing available on the DVI input, so many menus did not even appear.
    3. Checking with Viewsonic to make sure that I was clear on how the monitor selects inputs. It's largely automatic, but hitting the '2' key on the front panel forces a rescan of the analog and digital inputs.
    4. Substituting another display on this workstation, with all cables unchanged, so I could verify that the DVI output on my video card still worked. Tested fine.
    5. Moving the affected display to another workstation, to see if it was capable of functioning on the DVI input from a different machine. It was not, test failed.
    6. Unplugging everything and letting it sit for over an hour (while I fumed) - test failed.
    7. Returned the affected display to Costco today, for a spanky new one. It worked great on DVI with existing hardware (and under XP) this afternoon, so I decided to re-start my Solaris install.
    Lather, rinse, repeat, or so I was about to find out....
    After I was asked to reboot from CD1, my display died again.
    Just like yesterday, it's currently working fine on the VGA input/dead to the world on DVI, and just like yesterday, everything was fine until the first reboot after the Solaris CD1. I repeated the most pertinent aspects of my prior diagnostic steps, and then I went out to the back porch to curse and throw tools until I felt better.
    I cannot find a hardware reset button for the display, and an old friend of mine reports that he had a similar issue under Solaris 8/X86 in which he ended up blowing up a CRT. The Sol8 installer was overdriving the monitor.
    That said, I don't think that the DVI interface is able to 'overdrive' a monitor, and that confuses me more deeply. I know that if I (re)abuse the return policy of this warehouse store once more tomorrow and get a new display it will fix the problem, but I'm hoping that I can fix this in house!
    I refuse to believe that Solaris is actually frying the DVI input on my display, but I do have clear evidence that it the installer is a destructive force, at least with Nvidia cards and a VA2012wb. I'm seeing some similar threads on the Linux forums, some mentioning the part number of my display in specific, but no clear resolutions yet.
    Any thoughts?
    - Eli

    OK, well... I did a restart, invoking the 'option' command, and the Lion Recovery partition did not show up, so I went ahead and booted back into SL, wherein I was given a 'The disk you inserted was not readable by this computer' with a choice of ejecting, ignoring, or initializing.  I chose Ignore, and the drive now just shows up in disk utility as 'media' with no opportunity to interact with it.
    I had the presence of mind to make a Lion DVD before I installed, so I booted with that, and it too was unable to interact with the drive.
    Given the degraded state of this drive, I have no reason to suspect that entering target disk mode and mounting to my MBP would bear any fruit... looks like this sucker is beyond hope.  Yay...
    I will not be re-installing Lion until at least .2 comes out at this point.. I can't afford a wasted day like this again.

  • Boot from second hard drive with ZFS in Solaris 10 x86

    Hi,
    The usual menu.lst to boot Solaris10 x86 with a boot environment that contains a ZFS boot loader is this one
    title Solaris 10 5/08 s10x_nbu6wos_nightly X86
    findroot (pool_rpool,0,a)
    kernel$  /platform/i86pc/multiboot  -B $ZFS-BOOTFS
    module /platform/i86pc/boot_archive
    title Solaris failsafe
    findroot (pool_rpool,0,a)
    kernel /boot/multiboot kernel/unix -s    -B console=ttyb
    module /boot/x86.miniroot-safeI understand that to add an alternate boot disk, I have to play with installgrub and then attach it in the pool.
    But my question is : Is there a way to boot from my alternate hard disk by adding a new entry in menu.lst or is the only
    way is to modify the BIOS parameter?
    Thanks for your help,
    Groucho_fr

    Groucho_fr wrote:
    Thanks for your answer Alan,
    But ok, I imagineI can add a grub entry. But what I want to know is what is the exact way to boot from an alternate hard disk on Solaris 10u6
    x86.AFAIK there are only two ways to do this. Select the disks via BIOS which becomes a royal PITA in a short amount of time or play with a boot manager such as GRUB until you get the syntax right.
    Personally I put all OS's on the primary disks if possible to avoid these situations and if I have others to play with then you can easily mount them in or set them up as D: drive etc...
    The only exception would be in an enterprise setting where you need to do things such as mirroring but then again in those situations it's only one OS per machine anyways so it's much easier.
    So at the end, I am not sure what I have to configure and what is the procedure to boot from my alternate boot diskTry the grub homepage for the grub manual and hopefully for a mailing list or try a search engine.
    http://docs.sun.com/app/docs/doc/819-5461/zfsboot-1?a=view
    has an example to follow of using -B.
    And moreover, the installgrub does not working for me :
    root@mac1 # zpool status
    pool: rpool
    state: ONLINE
    scrub: resilver completed after 0h2m with 0 errors on Thu Mar 26 10:56:24 2009
    config:
    NAME          STATE     READ WRITE CKSUM
    rpool         ONLINE       0     0     0
    mirror      ONLINE       0     0     0
    c5t0d0s0  ONLINE       0     0     0
    c5t4d0s0  ONLINE       0     0     0
    errors: No known data errors
    root@mac1 # installgrub /boot/grub/stage1 /boot/grub/stage2 /dev/rdsk/c5t4d0s0
    cannot open/stat device /dev/rdsk/c5t4d0s2
    You shouldn't need to do an installgrub if you installed Solaris. Try c5t4d0s0 not s2.
    alan

  • Could not mount USB drive on Solaris 10 x86 system

    Hi All,
    I am having difficulty mounting a USB drive on Solaris 10 x86 system with the following different unsuccessful attempts:
    # uname -a
    SunOS venus 5.10 Generic_139556-08 i86pc i386 i86pc
    # rmformat
    Looking for devices...
         1. Volmgt Node: /vol/dev/aliases/cdrom0
            Logical Node: /dev/rdsk/c0t0d0s2
            Physical Node: /pci@0,0/pci-ide@4/ide@0/sd@0,0
            Connected Device: TEAC     DV-28E-V         1.AC
            Device Type: DVD Reader
         2. Logical Node: /dev/rdsk/c4t0d0s2
            Physical Node: /pci@0,0/pci108e,534b@2,1/storage@9/disk@0,0
            Connected Device: WD       My Book 1140     1007
            Device Type: Removable
         3. Volmgt Node: /vol/dev/aliases/rmdisk0
            Logical Node: /dev/rdsk/c4t0d0p0
            Physical Node: /pci@0,0/pci108e,534b@2,1/storage@9/disk@0,0
            Connected Device: WD       My Book 1140     1007
            Device Type: Removable
    # svcs volfs
    STATE  STIME    FMRI
    online Apr_13   svc:/system/filesystem/volfs:default# ls -lt /mnt
    total 0
    # mount -F pcfs /dev/dsk/c4t0d0p0:c /mnt
    mount: I/O error
    # mount -F pcfs /dev/rdsk/c4t0d0p0:c /mnt
    mount: Block device required
    # mount -F pcfs /dev/dsk/c4t0d0s2:c /mnt
    mount: I/O error
    # mount -F pcfs /dev/rdsk/c4t0d0s2:c /mnt
    mount: Block device required
    # fsck /dev/dsk/c4t0d0p0
    Can't open /dev/rdsk/c4t0d0p0: I/O error
    # fsck /dev/rdsk/c4t0d0p0
    Can't open /dev/rdsk/c4t0d0p0: I/O error
    # fsck /dev/dsk/c4t0d0s2
    Can't open /dev/rdsk/c4t0d0s2: I/O error
    # fsck /dev/rdsk/c4t0d0s2
    Can't open /dev/rdsk/c4t0d0s2: I/O errorSecond try,
    # svcadm disable volfs
    # svcs volfs         
    STATE          STIME    FMRI
    disabled       20:47:00 svc:/system/filesystem/volfs:default
    # mount -F pcfs /dev/dsk/c4t0d0p0:c /mnt
    mount: I/O errorLast try,
    # mkdir /rmdisk
    mkdir: Failed to make directory "/rmdisk"; File exists
    # ls -lt /rmdisk
    total 4
    lrwxrwxrwx   1 root     nobody        16 Oct  1  2009 rmdisk0 -> ./unnamed_rmdik
    drwxr-xr-x   2 root     nobody       512 Sep 30  2009 unnamed_rmdisk
    # cd /rmdisk
    # ls -lt
    total 4
    lrwxrwxrwx   1 root     nobody        16 Oct  1  2009 rmdisk0 -> ./unnamed_rmdik
    drwxr-xr-x   2 root     nobody       512 Sep 30  2009 unnamed_rmdisk
    # ls -lt unnamed_rmdisk
    total 0
    # ls -lt rmdisk0
    lrwxrwxrwx   1 root     nobody        16 Oct  1  2009 rmdisk0 -> ./unnamed_rmdik
    # df -h
    Filesystem             size   used  avail capacity  Mounted on
    /dev/dsk/c1t0d0s0      5.1G   4.0G   1.1G    78%    /
    /devices                 0K     0K     0K     0%    /devices
    ctfs                     0K     0K     0K     0%    /system/contract
    proc                     0K     0K     0K     0%    /proc
    mnttab                   0K     0K     0K     0%    /etc/mnttab
    swap                   5.9G   984K   5.9G     1%    /etc/svc/volatile
    objfs                    0K     0K     0K     0%    /system/object
    sharefs                  0K     0K     0K     0%    /etc/dfs/sharetab
    /usr/lib/libc/libc_hwcap2.so.1
                           5.1G   4.0G   1.1G    78%    /lib/libc.so.1
    fd                       0K     0K     0K     0%    /dev/fd
    swap                   5.9G   148K   5.9G     1%    /tmp
    swap                   5.9G    32K   5.9G     1%    /var/run
    /dev/dsk/c1t0d0s7      129G   1.7G   126G     2%    /export/home
    # /etc/init.d/volmgt stop
    # svcs volfs            
    STATE          STIME    FMRI
    disabled       21:02:31 svc:/system/filesystem/volfs:default
    # pwd
    /rmdisk
    # cd /
    # ls -lt /rmdisk
    total 4
    lrwxrwxrwx   1 root     nobody        16 Oct  1  2009 rmdisk0 -> ./unnamed_rmdik
    drwxr-xr-x   2 root     nobody       512 Sep 30  2009 unnamed_rmdisk
    # /etc/init.d/volmgt st  
    # svcs volfs
    STATE          STIME    FMRI
    disabled       21:02:31 svc:/system/filesystem/volfs:default
    # /etc/init.d/volmgt start
    volume management starting.
    # svcs volfs             
    STATE          STIME    FMRI
    online         21:04:44 svc:/system/filesystem/volfs:default
    # svcs volfs
    # mount | grep rmdisk
    # pwd
    # ls -lt /rmdisk
    total 4
    lrwxrwxrwx   1 root     nobody        16 Oct  1  2009 rmdisk0 -> ./unnamed_rmdik
    drwxr-xr-x   2 root     nobody       512 Sep 30  2009 unnamed_rmdisk
    # ls -lt /rmdisk/unnamed_rmdisk
    total 0
    # iostat -En   
    c0t0d0           Soft Errors: 3 Hard Errors: 0 Transport Errors: 0
    Vendor: TEAC     Product: DV-28E-V         Revision: 1.AC Serial No: 
    Size: 0.00GB <0 bytes>
    Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
    Illegal Request: 3 Predictive Failure Analysis: 0
    c1t0d0           Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
    Vendor: HITACHI  Product: HUS1514SBSUN146G Revision: SA04 Serial No: 0921B2Y3PC
    Size: 146.81GB <146810535936 bytes>
    Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
    Illegal Request: 0 Predictive Failure Analysis: 0
    c1t1d0           Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
    Vendor: HITACHI  Product: HUS1514SBSUN146G Revision: SA04 Serial No: 0921B2Z5NC
    Size: 146.81GB <146810535936 bytes>
    Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
    Illegal Request: 0 Predictive Failure Analysis: 0
    c4t0d0           Soft Errors: 21 Hard Errors: 0 Transport Errors: 0
    Vendor: WD       Product: My Book 1140     Revision: 1007 Serial No: 
    Size: 2000.37GB <2000365289472 bytes>
    Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
    Illegal Request: 21 Predictive Failure Analysis: 0
    #This is a working production system with 2 146.81GB mirrored hard disks. There is no disk error for either local or external 2TB Western Digital USB disks that works on Windows 7 or XP.
    Any idea on what else to look for?
    Thanks in advance,
    Jack
    Edited by: 797805 on 6/06/2012 04:48

    Hi All,
    Looks like it was a driver / incompatibility / unsupported issue since 2 other much smaller USB keys (Lexar USB Flash Drive – 32GB, SanDisk Cruzer Colors – 4GB) were successfully mounted automatically by volfs service as follows:
    # df -h
    Filesystem             size   used  avail capacity  Mounted on
    /dev/dsk/c1t0d0s0      5.1G   4.0G   1.1G    78%    /
    /dev/dsk/c1t0d0s7      129G   1.7G   126G     2%    /export/home
    /vol/dev/dsk/c3t0d0/unnamed_rmdisk#1:c   3.7G   2.4G   1.3G    65%    /rmdisk/unnamed_rmdisk#1
    /vol/dev/dsk/c2t0d0/unnamed_rmdisk:c    29G    96K    29G     1%    /rmdisk/unnamed_rmdiskIt also appears that the Device status of Not Ready from “iostat –En” below may not be correct either since both smaller drives are working fine:
    # iostat -En
    c4t0d0           Soft Errors: 23 Hard Errors: 0 Transport Errors: 0
    Vendor: WD       Product: My Book 1140     Revision: 1007 Serial No: 
    Size: 2000.37GB <2000365289472 bytes>
    Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
    Illegal Request: 23 Predictive Failure Analysis: 0
    c2t0d0           Soft Errors: 7 Hard Errors: 0 Transport Errors: 0
    Vendor: Lexar    Product: USB Flash Drive  Revision: 1100 Serial No: 
    Size: 31.41GB <31406948352 bytes>
    Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
    Illegal Request: 7 Predictive Failure Analysis: 0
    c3t0d0           Soft Errors: 60 Hard Errors: 8 Transport Errors: 0
    Vendor: SanDisk  Product: Cruzer Colors+   Revision: 8.02 Serial No: 
    Size: 4.02GB <4022337024 bytes>
    Media Error: 0 Device Not Ready: 0 No Device: 8 Recoverable: 0
    Illegal Request: 0 Predictive Failure Analysis: 0In other word, the same question remains on whether it is possible to install a driver to overcome this issue and where to such driver?
    It is necessary to install additional driver that came with the disk on Windows XP platform. However,
    Thanks again,
    Jack

  • Solaris 10 x86 5/08 audio driver for SoundMax Integrated Digital Audio

    Hello out there, I recently installed Solaris 10 x86 5/08 on my IBM ThinkPad T60 (2007-63U) and I'm really impressed how well it is working.
    The only thing I've found not working so far is the audio.
    I've installed the Solaris Audio Drivers 1.0 from:
    http://www.sun.com/download/index.jsp?cat=Hardware%20Drivers&tab=3&subcat=Audio%20Devices
    ...but it still is not recognizing the audio device.
    Everything else is working great (thank you Sun and the OpenSolaris Community!!!!!!!), so getting the audio working would be even better.
    Any pointers anyone has on what to look for on the system (e.g. in /var/adm/messages) or how to configure the audio to support the SoundMax Integrated Digital Audio would be greatly appreciated.

    ...well, I've tried building oss-v4.0-build1016-src-cddl but I haven't been able to get it to work.
    In preparation for the build, I did install Sun Studio 12 (from http://developers.sun.com/sunstudio/index.jsp ), patched it, and installed gawk-3.1.6 ( from http://www.sunfreeware.com/indexintel10.html ) and ran configure/make install as instructed which successfully completed.
    The following is what I get when executing ossdetect:
    ================================================================================
    rem_drv osscore
    rem_drv hdaudio
    rem_drv ossusb
    rem_drv sadasupport
    Driver (osscore) not installed.
    unloaded osscommon
    add_drv -m '* 0666 root sys' osscore
    add_drv -m '* 0666 root sys' -i '"pci8086,27d8"' hdaudio
    add_drv -m '* 0666 root sys' -i '"usbif,class1"' ossusb
    devfsadm: driver failed to attach: ossusb
    Warning: Driver (ossusb) successfully added to system but failed to attach
    add_drv -m '* 0666 root sys' sadasupport
    /dev/mixer: No such file or directory
    ================================================================================
    To note, the Solaris 10 x86 5/08 installation I am running on is the full distribution +OEM.
    I also cannot find the "soundon" or "soundoff" scripts referenced in the OSS build instructions.
    Any pointers would be appreciated.

Maybe you are looking for