Reappears Missing Server Side Dependencies in Sharepoint Foundation 2013 Health Analyzer
Hi all,
I am a little bit confused why I am getting missing server side dependencies again and again. The missing server side dependencies shows the errors of "MissingSetupFiles". When I click on "Reanalyze Now" button,
the error vanishes from the Health Analyzer page. But after one day it reappears again and shows "Missing Server Side Dependencies", When I again click on "Reanalyze Now" the error of "Missing Server Side Dependencies" goes
away.
But after one or two days, the error comes up again.
Can you please help me why this is happening.
Thanks for help.
Hi Vishwajeet,
You are able to use SharePoint Feature Administration from Codeplex to clean up the Missing Features. You can do it by clicking here.
Also , you are able to use PowerShell to resolve it. More detailed information, click here.
Here are some similar posts for you to take a look at:
http://social.technet.microsoft.com/Forums/en-US/cc0b3ac7-1eb7-4e5b-9334-8c556e4c8b23/test-spcontentdatabase-errors-in-sharepoint-2010
http://www.jeffscorner.org/blog/post/SharePoint-2013-%E2%80%93-Missing-server-side-dependencies-%E2%80%93-MissingWebPart-Webpart-class.aspx
http://www.heyweb.net/2011/08/fixing-missing-server-side-dependencies-missingfeature/
I hope this helps.
Thanks,
Ketak
Similar Messages
-
Team Foundation Server 2013.2 - SharePoint 2013 SP1 - Missing Server Side Dependencies
Environment:
TFS 2013.2 (update 2) on Windows Server 2012 R2, with MS SQL Server 2014 on the same machine;
SharePoint 2013 SP1 (with April 2014 update) on Windows Server 2012 R2
MS SQL Server 2014 on Windows Server 2012 R2 (Used by SharePoint)
Title
Missing server side dependencies.
Severity
1 - Error
Category
Configuration
Explanation
[MissingSetupFile] File
[Features\TfsDashboardAgileReports\Reports\Bug Progress.xlsx] is referenced [6] times in the database [WSS_Content_Internal], but exists only under Microsoft SharePoint Foundation 2010 setup folder. Consider upgrading the feature/solution which contains this
file to the latest version. One or more setup files are referenced in the database [WSS_Content_Internal], but are not installed on the current farm. Please install any feature or solution which contains these files.
[MissingSetupFile] File
[Features\TfsDashboardAgileReports\Reports\Bug Reactivations.xlsx] is referenced [6] times in the database [WSS_Content_Internal], but exists only under Microsoft SharePoint Foundation 2010 setup folder. Consider upgrading the feature/solution which contains
this file to the latest version. One or more setup files are referenced in the database [WSS_Content_Internal], but are not installed on the current farm. Please install any feature or solution which contains these files.
[MissingSetupFile] File
[Features\TfsDashboardAgileReports\Reports\Bug Trends.xlsx] is referenced [6] times in the database [WSS_Content_Internal], but exists only under Microsoft SharePoint Foundation 2010 setup folder. Consider upgrading the feature/solution which contains this
file to the latest version. One or more setup files are referenced in the database [WSS_Content_Internal], but are not installed on the current farm. Please install any feature or solution which contains these files.
And dozen more similar entries
The server is not in production, so I don't know if this error would cause any problems or not.
How to resolve this?
Thanks!
Fat DragonHi
A colleague and I are looking at a similar issue on TFs 2010 upgraded to TFS 2013 which I guess is slightly different mssing dependencies given the project template. we're using
[MissingSetupFile] File [Features\TfsDashboardBaseUI\default.aspx] is referenced [1] times in the database [WSS_Content], but exists only under Microsoft SharePoint Foundation 2010 setup folder. Consider upgrading the feature/solution which contains this
file to the latest version. One or more setup files are referenced in the database [WSS_Content], but are not installed on the current farm. Please install any feature or solution which contains these files.
[MissingSetupFile] File [Features\TswaWebParts\WebParts\CompletedBuilds.webpart] is referenced [1] times in the database [WSS_Content], but exists only under Microsoft SharePoint Foundation 2010 setup folder. Consider upgrading the feature/solution which contains
this file to the latest version. One or more setup files are referenced in the database [WSS_Content], but are not installed on the current farm. Please install any feature or solution which contains these files.
[MissingSetupFile] File [Features\TswaWebParts\WebParts\GoToWorkItem.webpart] is referenced [1] times in the database [WSS_Content], but exists only under Microsoft SharePoint Foundation 2010 setup folder. Consider upgrading the feature/solution which contains
this file to the latest version. One or more setup files are referenced in the database [WSS_Content], but are not installed on the current farm. Please install any feature or solution which contains these files.
Will logon in a couple of days to test "Fat Dragon's" approach ( unless someone tells me different)
Daniel
Freelance consultant -
Whenever I upgrade database from sharepoint foundation 2010 to 2013 using powershell ( stsadm.exe -o addcontentdb -url http://.....) I get this error when i try to navigate in Sharepoint Central administration
Help (new window) Go back to site Error Error
core.js
Troubleshoot issues with Microsoft SharePoint Foundation.
Correlation ID: 194f2b9c-628b-a018-f40a-c1b1772f2763
Date and Time: 7/3/2013 12:22:50 AM
Go back to site Go back to site
ULS viewer from log shows
System.ArgumentException: core.js
at Microsoft.SharePoint.WebControls.ScriptLink.AssertLocalizableCompatibility(String strFile, Boolean localizable)
at ASP._admin_admin_master.__BuildControl__control15()
at ASP._admin_admin_master.__BuildControl__control2()
at ASP._admin_admin_master.__BuildControlSPHtmlTag()
at ASP._admin_admin_master.__BuildControlTree(_admin_admin_master __ctrl)
at System.Web.UI.MasterPage.CreateMaster(TemplateControl owner, HttpContext context, VirtualPath masterPageFile, IDictionary contentTemplateCollection)
at System.Web.UI.Page.ApplyMasterPage()
at System.Web.UI.Page.PerformPreInit()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Any help would be appreciatedI have got the same error when using 2010 compatibility mode in my application when displaying a page. Following are error logs I got.
Area : SharePoint Foundation
Category : Web Controls
Level : High
EventID : aikzh
Message : core.js is should be localized in o14, call with attribute
Localizable = "true".
Area : SharePoint Foundation
Category : General
Level : Medium
EventID : 8nca
Message : Application error when access /_layouts/SP_CMN_Message.aspx,
Error=core.js at Microsoft.SharePoint.WebControls.ScriptLink.Asser
tLocalizableCompatibility(String strFile, Boolean localizable)
at ASP._layouts_15_simplev4_master.__BuildControl__control11()
at ASP._layouts_15_simplev4_master.__BuildControl__control3()
at ASP._layouts_15_simplev4_master.__BuildControl__control2()
at ASP._layouts_15_simplev4_master.__BuildControlTree(_layouts_15_si
mplev4_master __ctrl) at
System.Web.UI.MasterPage.CreateMaster(TemplateControl owner,
HttpContext context, VirtualPath masterPageFile, IDictionary
contentTemplateCollection) at
System.Web.UI.Page.ApplyMasterPage() at
System.Web.UI.Page.PerformPreInit() at
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBe...
Area : SharePoint Foundation
Category : Runtime
Level : Unexpected
EventID : tkau
Message : System.ArgumentException: core.js at Microsoft.SharePoint.WebCont
rols.ScriptLink.AssertLocalizableCompatibility(String strFile,
Boolean localizable) at
ASP._layouts_15_simplev4_master.__BuildControl__control11() at
ASP._layouts_15_simplev4_master.__BuildControl__control3() at
ASP._layouts_15_simplev4_master.__BuildControl__control2() at AS
P._layouts_15_simplev4_master.__BuildControlTree(_layouts_15_simplev
4_master __ctrl) at
System.Web.UI.MasterPage.CreateMaster(TemplateControl owner,
HttpContext context, VirtualPath masterPageFile, IDictionary
contentTemplateCollection) at
System.Web.UI.Page.ApplyMasterPage() at
System.Web.UI.Page.PerformPreInit() at
System.Web.UI.Page.ProcessRequestMain(Boolean
includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAs...
Area : SharePoint Foundation
Category : General
Level : High
EventID : ajlz0
Message : Getting Error Message for Exception
System.Web.HttpUnhandledException (0x80004005): Exception of type
'System.Web.HttpUnhandledException' was thrown. --->
System.ArgumentException: core.js at Microsoft.SharePoint.WebCon
trols.ScriptLink.AssertLocalizableCompatibility(String strFile,
Boolean localizable) at
ASP._layouts_15_simplev4_master.__BuildControl__control11() at
ASP._layouts_15_simplev4_master.__BuildControl__control3() at
ASP._layouts_15_simplev4_master.__BuildControl__control2() at AS
P._layouts_15_simplev4_master.__BuildControlTree(_layouts_15_simplev
4_master __ctrl) at
System.Web.UI.MasterPage.CreateMaster(TemplateControl owner,
HttpContext context, VirtualPath masterPageFile, IDictionary
contentTemplateCollection) at
System.Web.UI.Page.ApplyMasterPage()...
Area : SharePoint Foundation
Category : General
Level : Monitorable
EventID : aat87
Message : An unexpected error has occurred.
The error appeared while Applying Master Page..
I have managed to fix that removing "15" from MasterPageFile="~/_layouts/15/simple.master", so the path is
MasterPageFile="~/_layouts/simple.master".
Otherwise, it could be fixed changing attribute "Localizable" to true in <SharePoint:ScriptLink language="javascript" name="core.js" OnDemand="true" EnableCustomActions="false" Localizable="false"
runat="server" /> in simplev4.master MasterPage, however this way is not desirable.
hope that could help.. -
Upgrading the Features framework in SharePoint foundation 2013
Hi all,
I have a question, how can I upgrade the features of Sharepoint foundation 2013. In Sharepoint Health Analyzer, there is an error "missing server side dependencies" and description of this error it has been said that I need to upgrade the feature
to latest version.
Can you please tell me how can I upgrade the feature so that above error does not appear in Health Analyzer.
Thanks for help.Try below:
http://itfreesupport.com/2014/09/missing-server-side-dependencies-on-sharepoint-2010-and-sharepoint-2013/
If this helped you resolve your issue, please mark it Answered. You can reach me through http://itfreesupport.com/ -
When trying to create a new server farm in the sharepoint foundation 2013 we get a following error :
The local farm is not accessible. Cmdlets with FeatureDependencyId are not registered.
PS C:\Users\Administrator> New-SPConfigurationDatabase
cmdlet New-SPConfigurationDatabase at command pipeline position 1
Supply values for the following parameters:
DatabaseName: SharePoint_Config
DatabaseServer: PC78\SQLEXPRESS,25111
FarmCredentials
Passphrase: *********
New-SPConfigurationDatabase : One or more types failed to load. Please refer
to the upgrade log for more details.
At line:1 char:1
+ New-SPConfigurationDatabase
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidData: (Microsoft.Share...urationDatabase:
SPCmdletNewSPConfigurationDatabase) [New-SPConfigurationDatabase], SPUpgra
deException
+ FullyQualifiedErrorId : Microsoft.SharePoint.PowerShell.SPCmdletNewSPCon
figurationDatabase
And the error log is shown below :
Microsoft.SharePoint.Upgrade.SPUpgradeException: One or more types failed to load.
Please refer to the upgrade log for more details.
at Microsoft.SharePoint.Upgrade.SPActionSequence.LoadUpgradeActions()
at Microsoft.SharePoint.Upgrade.SPActionSequence.get_ActionsInternal()
at Microsoft.SharePoint.Upgrade.SPUtility.GetLatestTargetSchemaVersionByMajorVersion(Type typeActionSequence, Int32 majorVer)
at Microsoft.SharePoint.Upgrade.SPUtility.get_CurrentSPSiteWssTargetSchemaVersion()
at Microsoft.SharePoint.Administration.SPSiteCollection.Add(SPContentDatabase database, SPSiteSubscription siteSubscription, String siteUrl, String title, String description, UInt32 nLCID, Int32 compatibilityLevel, String webTemplate, String ownerLogin, String ownerName, String ownerEmail, Strin... b712a522-fa85-49eb-b59c-dedf55295504
...g secondaryContactLogin, String secondaryContactName, String secondaryContactEmail, String quotaTemplate, String sscRootWebUrl, Boolean useHostHeaderAsSiteName, Boolean overrideCompatibilityRestriction)
at Microsoft.SharePoint.Administration.SPSiteCollection.Add(SPSiteSubscription siteSubscription, String siteUrl, String title, String description, UInt32 nLCID, Int32 compatibilityLevel, String webTemplate, String ownerLogin, String ownerName, String ownerEmail, String secondaryContactLogin, String secondaryContactName, String secondaryContactEmail, Boolean useHostHeaderAsSiteName)
at Microsoft.SharePoint.Administration.SPAdministrationWebApplication.CreateDefaultInstance(SqlConnectionStringBuilder administrationContentDatabase, SPWebService adminService, IdentityType identityType, ... b712a522-fa85-49eb-b59c-dedf55295504
...String farmUser, SecureString farmPassword)
at Microsoft.SharePoint.Administration.SPFarm.CreateAdministrationWebService(SqlConnectionStringBuilder administrationContentDatabase, IdentityType identityType, String farmUser, SecureString farmPassword)
at Microsoft.SharePoint.Administration.SPFarm.CreateBasicServices(SqlConnectionStringBuilder administrationContentDatabase, IdentityType identityType, String farmUser, SecureString farmPassword)
at Microsoft.SharePoint.Administration.SPFarm.Create(SqlConnectionStringBuilder configurationDatabase, SqlConnectionStringBuilder administrationContentDatabase, IdentityType identityType, String farmUser, SecureString farmPassword, SecureString masterPassphrase)
at Microsoft.SharePoint.Administration.SPFarm.Create(SqlConnectionStringBuil... b712a522-fa85-49eb-b59c-dedf55295504
...der configurationDatabase, SqlConnectionStringBuilder administrationContentDatabase, String farmUser, SecureString farmPassword, SecureString masterPassphrase)
at Microsoft.SharePoint.PowerShell.SPCmdletNewSPConfigurationDatabase.InternalProcessRecord()
at Microsoft.SharePoint.PowerShell.SPCmdlet.ProcessRecord() b712a522-fa85-49eb-b59c-dedf55295504
Error Category: InvalidData Target Object Microsoft.SharePoint.PowerShell.SPCmdletNewSPConfigurationDatabase Details NULL RecommendedAction NULL b712a522-fa85-49eb-b59c-dedf55295504
Leaving ProcessRecord Method of New-SPConfigurationDatabase. e9ae5ba6-c499-0000-d35c-aee999c4cf01
we are using server 2012 R2 and we don't have office 2010 installedYes,SQL server is on the same server as SharePoint
SQL has both the permissions Securityadmin
and DBcreator roles on SQL Server.
When we run those sharepoint management shell commands the database will be created with the error
msg (shown in attachment) -
Sharepoint foundation 2013 on windows 8
Hi All
Can we install Sharepoint foundation 2013 on windows 8 OS
Regards
SivamNo. You can't. Windows 8 is not supported by default.
You will need a server OS to install SharePoint foundation 2013.
You can run a Hyper-V virtual machine on windows 8 though. And can install SharePoint on that. This does require more resources.
You can find instructions on how to do that at
Installing SharePoint 2013 on Windows 8 Client Hyper-V -
SharePoint Foundation 2013 installed on Windows Server 2012 not sending out email notification
I have a server where i installed SP Foundation 2013 on top of Windows Server 2012. I have configured the SMTP as well as the outgoing SMTP in Central Administration
of SharePoint. When i create an alert on a document library, its did not sent any email notification on the changes made to the document in the document library. So, i created a workflow to send out email using SPD2013. The workflow run, but it cannot sent
out email with error saying that outgoing email is not configured correctly. I have checked with another server which i installed SP foundation 2013 on top of Windows Server 2008 R2 - its sending out email just fine using same configuration and outgoing SMTP.
I need help to resolve this issue or at least the cause of the problem.
Any help is greatly appreciated.
Try below:
http://social.technet.microsoft.com/wiki/contents/articles/13771.troubleshooting-steps-for-sharepoint-alert-email-does-not-go-out.aspx
Go to Central Admin ---->Operations----->outgoing email settings and verify that SMTP server is mentioned correctly
2) Test the connectivity with the SMTP server.
In order to do that follow these steps:
Open cmd
telnet <SMTP server name> 25 ( We connect smtp server to the port 25)
you should see a response like this 220 <servername> Microsoft ESMTP MAIL Service, Version: 6.0.3790.3959 ready at date and time
Beware that different servers will come up with different settings but you will get something
If you dont get anything then there could be 2 possible reasons, either port 25 is blocked or
the smtp server is not responding.
For testing response from your server
For testing response say ehlo to it.
Type :
ehlo <servername>
output:
250 <servername> Hello [IP Address]
Now a test mail can be sent from that SharePoint server.
Now we need to enter the From address of the mail.
Type :
mail from: [email protected]
output:
250 2.1.0 [email protected]….Sender OK
It's time to enter the recepient email address.
Type : rcpt to: [email protected]
output:
250 2.1.5 [email protected]
Now we are left with the data of the email. i.e. subject and body.
Type : data
output:
354 Start mail input; end with <CRLF>.<CRLF>
Type:
subject: this is a test mail
Hi
This is test mail body
I am testing SMTP server.
Hit Enter, then . and then Enter.
output:
250 2.6.0 <<servername>C8wSA00000006@<servername>> Queued mail for delivery
Type: quit
output:
221 2.0.0 <servername> Service closing transmission channe
3) Check alerts are enabled for your web application
verify if the windows timer service is running or not.
Run this stsadm command to check that
Stsadm.exe -o getproperty -url http://SharePoint-web-App-URL -pn alerts-enabled
This should return <Property Exist="Yes" Value="yes" />
If you don’t get this, Enable alerts by:
stsadm.exe -o setproperty -pn alerts-enabled -pv "true" -url http://SharePoint-web-App-URL
If its already enabled, try turn off and turn on it back.
4) Check the Timer job and Properties
Go to
MOSS 2007: Central Administration > Operations > Timer Job Definitions (under Global Configuration)
In SharePoint 2010: Central Administration > Monitoring > Review Job Definitions
Check whether the "Immediate Alerts" job is enabled for your web application. check these properties:
job-immediate-alerts
job-daily-alerts
job-weekly-alerts
stsadm.exe -o getproperty -url "http://Your-SharePoint-web-App-URL" -pn job-immediate-alerts
The expected output is:
<Property Exist="Yes" Value="every 5 minutes between 0 and 59"/>.
If you don’t get this, run the following command to set its value.
stsadm.exe -o setproperty -pn job-immediate-alerts -pv “every 5 minutes between 0 and 59" -url http://Your-SharePoint-web-App-URL
5) Check whether the account is subscribed for alerts and it has a valid email account. This should be the first thing to check if the problem persists for some users not for all.
6) Then check if at all those users have at least read permission for the list. Because the first mail should go out for every user without security validation but the next ones won't be delivered unless the user has at least read
permission.
7) If it is happening for one user, can also try to delete and re add the user in the site.
8) Most importantly , you should try this one.
Run this SQL query to the content db < Select * from Timerlock>
This will give you the name of the server which is locking the content database and since when.
In order to get rid of that lock
Go to that server which is locking the content db and then restart the windows timer service.
within some time it should release the lock from content db, if not then at the most stop the timer job for some time
Once the lock will be released then try to send some alerts
You will surely get the email alert.
I found this is the most probable reason for alert not working most of the time. We should start troubleshooting with above steps before coming to this step for any alert email issue but from step 1 to step 7 are best for new environments or new servers.
If the issue is like this ,alert was working before and suddenly stopped working without any environmental change then above conditions in step 1-7 should be ideally fine.
Even after this if it is not working, then you can try these few more steps too
9) Try re-registering the alert template:
stsadm -o updatealerttemplates -url http://Your-SharePoint-Web-App-URL -f "c:\Program Files\Common Files\Microsoft Shared\web server extensions\12\TEMPLATE\XML\alerttemplates.xml" -LCID 1033
10) Try to clear the configuration cache
If this helped you resolve your issue, please mark it Answered -
Using Office Web Apps Server with SharePoint Foundation 2013
I want to know whether I can configure Office Web Apps server to edit Excel documents on a SharePoint Foundation 2013 site.
I came across a TechNet article that states that "When used together with SharePoint Server 2013, Office Web Apps Server provides updated versions of Word Web App, Excel Web App, PowerPoint Web App, and OneNote Web App".
However, later in the same article, it states "If your organization licenses Office 2013 through a Volume Licensing program, you can enable Office Web Apps editing for SharePoint 2013 on-premises" (without mentioning Foundation or Server).Hi Lemesnil,
The Office Web App server should support the Edit licenses for SharePoin Foundation 2013, Office Web App is free to
download, you can also try installing and configuring in a test environment, see more from the below article applied to SharePoint Foundation 2013.
http://support.microsoft.com/kb/2886404/en-us
http://blogs.technet.com/b/speschka/archive/2012/12/31/enabling-licensing-and-editing-for-office-web-apps-in-sharepoint-2013.aspx
Anohter useful article aobut how to license Office Web App server, you can take a look.
http://blogs.technet.com/b/volume-licensing/archive/2013/05/22/how-to-license-office-web-apps-server.aspx
Thanks
Daniel Yang
TechNet Community Support -
Sharepoint Foundation 2013 on Windows Server 2012 R2 Essential - any chance to install?
Understood that it's impossible to install SharePoint as it is not supported on a domain Controller BUT is there any chance to install instead SharePoint Foundation 2013 on a Essential Server?
Hi:
Seems so, although as you know it would be better on a member server as a VM.
http://www.em-soft.si/myblog/elvis/?p=305
Larry Struckmeyer[MVP] If your question is answered please mark the response as the answer so that others can benefit. -
Not able to install SharePoint Foundation 2013 SP1 on a Windows Server 2012 R2
I am very new working with SharePoint and Server 2012. I had and am having a lot of problems installing SharePoint Foundation 2013. I get over the typical errors as download all prerequisites from the Internet, installing the Farms, etc.
After I completed all the installations steps, and the installation has finished I tried to open SharePoint 2013 Central Administration but I can't access to it.
Does anyone has a suggestion?HI Sofia,Did you run the PSCONFIG wizard after the succesful completion of installation.If not,please run.Find the below link that gives more details on the installations.
http://expertsharepoint.blogspot.de/2013/11/detailed-sharepoint2013-installation-i.html
http://expertsharepoint.blogspot.de/2013/10/installation-of-sharepoint-2013-on.html
Anil Avula[Microsoft Partner,MCP,MCSE,MCSA,MCTS,MCITP,MCSM] See Me At: http://expertsharepoint.blogspot.de/ -
SharePoint Foundation 2013 Prerequisite installer keeps installing and restarting the server
Hi,
I'm trying to install SharePoint foundation 2013 on Windows Server 2008 R2 Standard SP1.
I already install SQL Server 2012 SP1 and TFS 2013 on the server.
I don't have internet connection on the server so i install the next prerequisites manually:
SQL Server 2008 R2 SP1 Native Client
Microsoft WCF Data Services 5.0
Microsoft Information Protection and Control Client (MSIPC)
Microsoft Sync Framework Runtime v1.0 SP1 (x64)
Windows Identity Extensions
Windows Identity Foundation (KB974405)
Windows Management Framework 3.0
Then I ran the prerequisitiesInstaller.exe from command line -
prerequisiteInstaller.exe /appfabric:[Full AppFabric Installer path] /KB2671763:[AppFabric update path]
the prerequisiteInstaller start to run - after some steps it request for server restart, after the server upload the installer start again and after some steps it request for server restart.
This loop is never ending.
I tried to do some action to fix this issue:
http://spreza.blogspot.co.il/2013/05/sharepoint-2013-prerequisite-keeps.html
http://social.technet.microsoft.com/Forums/sharepoint/en-US/bccdb9f1-dd91-4db1-bd19-6bfa658727f5/sharepoint-server-2010-setup-keep-asking-for-reboot?forum=sharepointadminprevious
There is any reason or solution for this scenario?Have you checked the log to see at what point and what update is requiring the re-boot? I suspect one of your manually installed pre-requisites may be an older version and when it restarts it starts the regular automated installer, which is causing
the loop. Check the log for more specific errors. The installer creates the log in the following location %TEMP%\prerequisiteinstaller.<date>.<time>.log
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem. -
Unable to install Sharepoint Foundation 2013 in Windows Server 2012 for FIM 2010 R2
HI,
I am Unable to install Sharepoint Foundation 2013 in Windows Server 2012 for FIM 2010 R2,
Before SharePoint Foundation 2013 installation I installed all prerequisite software that is required for SharePoint Foundation 2013 but when we run SharePoint Foundation 2013 setup that gives below error so I am requesting you please help on this.
Setup is unable to proceed due to the following error(s):
Windows Server Appfabric is not correctly configured.You should unistall Windows Server Appfabric and reinstall it using the SharePoint Products Preparation Tool.
Regards
Anil KumarYou really need to do what error is suggesting.
Windows Server Appfabric is not correctly configured.You should unistall Windows Server Appfabric and reinstall it using the SharePoint Products Preparation Tool.
Nosh Mernacaj, Identity Management Specialist -
Error 503 after renaming SharePoint Foundation 2013 Server
We renamed a SharePoint Foundation 2013 server using the procedure outlined here:
http://www.bluesphereinc.com/blog/renaming-a-sharepoint-20102013-server/
Everything seemed to work fine until we tried to access the site afterwards. Now all we get when trying to access the site is the Error 503: Service is unavailable message. We can get into central administration without any problems.Hi ,
According to your description, my understanding is that you encountered 503 error after renaming SharePoint Foundation 2013 Server.
For your issue, please refer to the actions as follow:
1.Check the web site properties in IIS. Under home directory tab, check the application pool value and then open that application pool from the application pools (separate node in the IIS tree). Click the
identity tab and see who is the pool assigned to. For the sake of testing, you can select "Predefined" and select local service from the drop down. Restart IIS and see if things work out for you. Http 503 error is generated by the IIS and it happens
when web server sends data stream back to the web site.
2.Verify that all SharePoint services are started, this error might occur because of changing the service account password. You may need to change the new password to application pool or SharePoint timer
service. Click the stopped application pool -> click advanced settings ->Identity ->click the user to retype the user ->Application Pool Identity dialog ->click set -> manually type the user name and password. Then restart the server.
If your issue persists, please provide detail error message of ULS log
to determine the exact cause of the error?
For SharePoint 2013, by default, ULS log is at
C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\LOGS
Best Regards,
Eric
Eric Tao
TechNet Community Support -
How to upload a video into Asset Library programmatically using server side code in sharepoint 2013
How to upload a video into Asset Library programmatically using server side code in sharepoint 2013
First you need to configure your asset library with video content type and then you can use SharePoint object model to upload the video files in it...
check this link for setting up Asset library
http://www.c-sharpcorner.com/UploadFile/54db21/asset-library-in-sharepoint-2010/
http://social.technet.microsoft.com/Forums/sharepoint/en-US/1d64a5f7-c7db-4ae0-8b0d-d0722cacf5f2/assets-library-video-files-and-c?forum=sharepointdevelopmentprevious
Mark ANSWER if this reply resolves your query, If helpful then VOTE HELPFUL
INSQLSERVER.COM
Mohammad Nizamuddin -
Sharepoint Foundation 2013 User field issue
Guys, I have an issue with Sharepoint Foundation 2013 site that we have created some custom workflows for. We have a couple required fields that we type in a users name and it automatically pulls up a user based on Active directory. once we choose that name
and then save the form. the field immediately becomes blank when i open the workflow item back up. I'm kind of at a loss. I've already totally hosed the server once and was forced to restore. This seams to have started when we installed share point server
patch KB2881077 but i cannot uninstall or roll back the patch as there is no option to.
Thoughts?If you're using SharePoint 2013 April 2013 CU or higher, this is a known issue where the People data is missing in Edit view. There is a separate issue that is resolved in the September 2014 CU:
http://support.microsoft.com/kb/2995905
Consider the following scenario:
You create a SharePoint 2013 list that contains a Person or Group (people picker) column.
You create or edit an item, and then you select a person whose name contains a comma in the Person or Group field.
In this scenario, the value of the Person or Group field is lost when you save the item.
Trevor Seward
Follow or contact me at...
  
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.
Maybe you are looking for
-
How to integrate industrial scale system to SAP R/3?
We have scale houses in our plants. It is used to weight incoming and outgoing trucks, which deliver goods for our business. We use SAP to create and process Bill of Ladings and we would like to integrate the weight information provided by our weighi
-
Need Help with Photoshop Elements 4 PLEASE!!!
I had Photoshop Elements 4 on my compuer and used it primarily to download photos from my digital camera. My computer crashed and I had to have the hard drive reformatted. I attempted to re-install Photoshop Elements 4 from my CD but it won't autom
-
Role Assignment Product Functionality
I am looking for any out of the box functionality to auto assign roles to users in IdM. We could create roles using bulk upload, however I am not sure how we can assign the roles to the existing users in IdM and push that information out to the resou
-
Conversion routines on SAP 4.0B
Hi All! I have a piece of software running on SAP 4.5 and I have to port it to SAP 4.0B (The horror !!!). I managed to solve all the problems but one. In version 4.5, author created many domains with conversion exits and some of these conversion exit
-
How to find Customer receivable including Opening Balance
Hi Experts, I am using SAP B1 8.8 PL 09. I have gone through the Customer receivable report available under Finance / Finance Report / Account / Aging. When I see this report Sales Employee wise, I notice that SAP does not include opening balance in