Rearranging within Album but above or below displayed screen problem

This is something I have done in the past, probably vers. 8, but can not do now.
I have more photos than can be displayed at one time on my screen. I can scroll up or down to see all photos. My problem is that if I want to select a photo near the bottom, for instance, and move it to an area near the top of the file, it will only let me take it to the top of the viewable area and insert it there. I have to keep repeating this process until I get to the place I want.
What it used to do was, when I dragged it to the top of the screen, the screen would automatically scroll so that I could get to the point that I wanted to insert.
Evidently I am doing something wrong, but cannot see what it is.

Welcome to the Apple Discussions.
You can still do that in 09, I do it all the time. It just takes a little trial and error to get the mouse to the space just below the window border that will cause window to scroll.
Regards
TD

Similar Messages

  • How can I get TV shows viewed through Hulu Plus on the Apple TV 3 to show as widescreen with black bands above and below the screen shot instead of chopping off the sides on my non-widescreen TV?

    I just bought a new Apple TV 3 today so I can watch shows from Hulu Plus without having to physically plug in separate audio and video cables from my Macbook Air to the TV every time. I have a non-widescreen TV and when I normally watch Hulu Plus on the TV (though Safari on my plugged in Macbook Air as mentioned above), the entire wide screen shot is shown with black bands above and below the sceen shot since I am watching a widescreen program on a non-widescreen TV.
    However, I noticed that when I watch the same show through Hulu Plus on my new Apple TV 3, the left and right edges of the shot are chopped off to make the program fill my non-widescreen TV. This bothers me because I would like to see the full shot and not just the chopped off middle portion. This is a real bummber because watching Hulu Plus without having to plug in my laptop is the only reason I bought the Apple TV. Is there anything I can do about this?
    Thanks!
    (FYI: I have the very first Macbook Air that is not capable of mirroring)

    How are you actually connected to the TV?  Does it have HDMI?  Most non-widescreen TVs would not.
    I would suspect a converter is either not outputting properly, your TV not interpreting the signal properly or you have some form of Zoom setting enabled on the TV.
    How does your TV handle widescreen from say cable or terrestrial TV sources ?
    Unfortunately AppleTV is not designed to be used with non-widescreen TVs so there's no setting on AppleTV to tweak.
    AC

  • 5k retina display screen problem

    I have 2 Macs 27'' one is late 2012 and the other one is Brand new 5k retina display.
    Last month I had a problem with my late 2012 Mac that there were clouds/smoke/shades on the display screen which was spreading more and more throughout the screen. I have contacted the technical support and I was told the issue was hardware related. Thanks to my guarantee period the screen was replaced.
    And now I am having the very same issue with my 5k retina display Mac and therefore I am seeking a reliable answer regarding the causes for that issue. It is really getting very frustrating to see such a problem especially with the brand new Mac 5k retina display Mac.
    Contacting the technical service in my area, ordering the part and waiting to be replaced takes around a week each time and I am losing considerably large amount of time as I am earning my living with my Mac as I am a freelance translator.
    I would be very much appreciated if I can hear something reasonable regarding the possible causes.

    I have been using a UPS and computers are plugged into it. Also I have been told by the Technical Service that dust and smoke can cause this but I am using the computers at home and I never smoke in the house.
    Besides, they told me that there is a possibility for Apple not to approve the replacement due to insignificance of the shade/smoke on the screen. In other words the stains/shades should be big enough but it is already clearly visible and enough to make me uncomfortable.
    Hope to find out why this is happening in order to avoid future occurrences. 

  • T410s fingerprint reader not working. Also, display/screen problems

    Hi,
    I have been using my t410s for about two months now, and initially I used the fingerprint reader to log on or unlock the computer.  I started signing on with my password a few weeks ago and have noticed that my fingerprint reader log-on will no longer work. 
    There is a green light next to the fingerprint reader when it is accessible (log-ins, etc.).  When I used to use it, it would pause and then blink green or red if tehre was an error, and then light up green again until I correctly swiped my finger.  Now, during log-ons, there is a green light, and when I swipe my finger, the light turns off (does not become green again, AND the screen does not recognize my original swipe) so I am forced to use the password to sign on. 
    How do I resolve this? 
    While I'm here...I've noticed in the last few weeks taht my screen would occasionally 'fade' to 'off colors' (like the contrast is tweaked).  I remember once, the screen shut down and then came back up with a window stating something abuot the computer resolving its own problem of the videocard(or whatever...I'm not sure what component it was, only that it was display-related).  It may help to know taht I use a display application that changes the screen brightness with the time of day (f.lux), which may have something to do with this but I doubt it because none of the screen settings with of this application look like the 'faded', 'off-looking' screen that I'm inquiring about. 
    Any tips? 

    Hi,
    I experienced the same strange display problem as you. Since two month I have a T410s (2912-39G) and from time to time the colors of the screen would start changing for no obvious reason and come back to normal after about one minute. When it happens it gives me the impression that the color composition changes gradually, as if one color component is suddenly fading away and the display image gets a weird contrast, but it is hard to describe. I have no influence on the process for example by changing the contrast, and with me it's not linked to any additional screen-software either (e.g. f.lux is not installed).
    I'm glad you mentioned the issue, dele44. I didn't dare to bother my dealer with it because it's hard to describe and I have no clue how to provoke it. Anybody else has had the problem or an idea how to solve it....

  • My iPod is stuck on a whit screen, but not the typical white screen problem.....i

    it's a 3G, when you push on the screen sometimes it works but recently it stopped completely and whenever I push it, it does nothing

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • VGA Display Screen Problems

    My macbook pro was working fine when it was connact to a second screen. I have the macbook closed and use the second screen as the main screen. Then I went to go plug it into a tv and used it and when I got back to plug it in to my second screen it told me format not support. For some reason it works when the laptop is open you can use the second screen but when you close it and try to use the second screen as the main screen, it give you a wrong format error. Another weird thing is that if you rotate the VGA screen 90 dagrees and shut the mac it works. I have the desplay right 1280x1024 and hz at 75. I do not understand why it would work with the mac open but when you close it, it no longer works.

    See kernel_task panics under Yosemite

  • How do I enlarge my display screen? Not the font, but the displayed screen itself.

    How do I enlarge my display screen? I'm not talking about enlarging the font, but just want the displayed screen to be larger. Thank You.

    Do you mean you'd like the display at a higher resolution?  It should be displaying the default, which is also its physical maximum resolution, unless you set it lower in display prefs.

  • My iPhone 4s turns off after battery gets below 40% and sometimes when I take a photo,it shows the photo in the photo album but will display a white screen when i tap on the photo. Please help thank you :)

    My Iphone 4s is 2 years and 3 months old. the battery drains very quickly, sometimes turning off once it reaches 40% if I open an app or say the camera.
    I charge it more than twice a day now as the battery life is so poor.
    Also, when I take a photo, the phot sometimes shows in the album, but if I click on it, it shows up as a white screen and I cannot send the photo either as the recipient gets a blank screen.
    I am not super flash with technology, so please be nice!
    Thank you

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.
    If the issue persists, take the device to Apple for evaluation and possible replacement.

  • I am working in photshop elements 13 organizer, album view, and would like to resequence (rearrange) the photos shown in the album but am unable to do so.  My understanding is that you can click on the phots that you want to move and drag it to a new loca

    I am working in photshop elements 13 organizer, album view, and would like to resequence (rearrange) the photos shown in the album but am unable to do so.  My understanding is that you can click on the phots that you want to move and drag it to a new location within the same album.  After i select the photo that I want to move and click on the photo, I get a cirlcle with a diagonal throught it and am unable to drag the photo to its new location.  What am I doing wrong?  I know this should be a simple thing to do.  Thanks

    Jimmy RG
    In the Elements Organizer 13
    The key to all this is to click on/select/highlight the Album that you have created in Local Albums.
    Then make sure that the Sort By: (in the row below the highlighted "Media" header is set for Album Order.
    You should see a number at the top left of each of thumbnails.
    Then, click on the thumbnail that you want to move, hold down the click, and drag the thumbnail to the wanted new location
    in the line up of thumbnails.
    Often I had to press down hard on the drag.
    Please let us know if that worked for you.
    Also, in Edit Menu/Preferences/Keyword Tags and Albums/Enable Manual Sorting Options, I set all for manual.
    ATR

  • My garageband can't be used because when I open a project (new or old) the program extends beyond the bottom of the display screen and I can't access what is below the bottom of the screen (like the record button).  I know there's a simple fix, but what?

    My garageband can't be used because when I open a project (new or old) the program extends beyond the bottom of the display screen and I can't access what is below the bottom of the screen (like the record button).  I know there's a simple fix, but what?

    two things to try: either click the green "zoom" bottom at the topLeft of the window in the title bar, or go to your System Prefs and then Displays, and increase the resolution that is used

  • Iphone camera effects display in photo album but disappear when you open the photo itself. why is this ?

    iphone camera effects display in photo album but disappear when you open the photo itself. why is this ?

    Hi Cyclosaurus,
    Thank you for your reply. Sorry to bug you again but can I ask some further questions? Pls excuse my lack of knowledge on these things.
    In relation to your points:
    1) In the ftp publishing settings, public_html is acutal in where it says "site name", where it says "URL" I have http://www.gippmed.com. I was advised to put public_html in "site name" from my hosting. If I put anything else it publishes the entire site to a folder with that name on the server and is not viewable online?
    2) I have removed the spaces in the album page name and will reupload soon. In relation to the image file names, am I correct in saying that iweb is naming them from the captions? Do you really have to use one word captions or use underscores, it looks a little odd? I have read troubleshooting articles about iweb and spaces and it also recommends similar as you are, suggesting that all page names should have underscore instead of spaces. Problem is, if for example I change the page name "About Me" to "About_Me" iweb automatically changes it in the navigation menu and this looks silly to have undescores in the Nav Menu. Is there a way around this?
    Lastly, a new problem that I have never had before:
    Previously, iweb would remember what I had published and only publish new site changes. Now, every time I turn my computer off and on, I open iweb and it doesn't recognise any of the previous publishing, ie it republishes the entire site.
    Thank you again for your help

  • IPhoto 2011. Created an album from different cameras (different filenames), placed pics in order in album but want to export into new folder on desktop in same order. Can I number the pics within iPhoto to reflect that order, or simply export in order?

    iPhoto 2011. I have created an album from different cameras (different filenames), and placed pics in order in the iphoto album but want to export into a new folder on the desktop in that same order. Can I number the pics within iPhoto to reflect that order, or simply export in order? 
    Thanks!

    File -> Export, and note the options under File Name
    Another way:
    Here's one (of several) way(s) to do what you want:
    Make an Album of the photos, then drag the pics into your preferred order.
    Then Photos Menu: Batch Change -> Set Title to Text "John's Birthday", for instance, and tick the box to append a number to each Photo. Now your photos are titled 'John's Birthday 001, John's Birthday 002 ... etc'
    Then File -> Export and in the Export dialogue set the Filename to "Use Title"
    Sort on Filename in the FInder and you end up with a folder full of images in the same order as the Album in iPhoto.

  • HT204291 I've done all of the above but I'm still displaying the message: to access your iTunes library on Apple TV, turn on home sharing in iTunes on your computer using ....... My home sharing is on ???? Confused, I've restarted and reset Apple TV with

    I've done all of the above but I'm still displaying the message: to access your iTunes library on Apple TV, turn on home sharing in iTunes on your computer using ....... My home sharing is on ???? Confused, I've restarted and reset Apple TV with no change

    You mention doing all of the above, what would that be exactly?
    The article linked above is for airplay, have you checked home sharing tips?
    http://support.apple.com/kb/ts2972

  • When my iPhone 5s is paired with my 2014 Lexus Rx350 I am able to view text messages but cannot view email messages in the car display screen. My previous Blackberry Torch would read both text and email messages. Does anybody know how to fix?

    When I pair my new iPhone 5S in my 2014 Lexus it displays and allows me to read the SMS messages off my phone on the car display but it does not display or allow me to read email messages. When pairing my previous Blackberry Torch the car displayed and allowed me to read both. Lexus have told me it is an Apple problem and not a Lexus problem which may be true as the BB phone worked great. Does anybody know if Apple is planning an iPhone update for this? 

    Just to recap, this is a collection of ports I have collected over time for people who needed this information when setting up the HP ePrint app so that they could view their email from within the app.  I am certain other applications also need this information.  Although lengthy, I could not find a more comprehensive place to retrieve this information.  Feel free to post additional information, faulty information, or other related topics below as this is simply a collection of data and it would be practically impossible to test all of them. Thank you!
    Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
    When a solution is found please mark the post that solves your issue.
    Every problem has a solution!

  • Borders above and below on iPhone 5 - colour query

    Hi folks.
    I've designed my apps for standard resolution displays (iPhone 3 and 4 etc), and I don't really have to upgrade them so they 'stretch' for the likes of the iPhone 5.  Anyway, because of this I understandably get the bars above and below my app.
    When I tested this on my local device, these bars appeared black.  So it looked ok to be honest.  But when I submitted them via the AppStore and downloaded them, the bars above and below are now grey!  Just like the grey around the stage in Adobe Flash.  And it makes my app look pretty cheap.
    Is there a way around this?  I'm thinking I'll just have to create a big black box with a hole in it 320 x 480 pixels in dimension and put it on one of the top layers.  But this seems a bit....hacky?  The stage color for my apps is currently set to white (not grey)
    Any advice appreciated.

    What if I purchased the phone from an AT&T store, not an Apple Store? Will that affect anything? And how long do I have the warranty until (I have a normal warranty, not extended)?
    ^Sorry for all the questions!

Maybe you are looking for