Reason needed for the status Canceled - Since already processed.

We have an IDOC to PROXY scenario and we encountered an error.
First time the message failed in PI with the error message as
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">HTTP_RESP_STATUS_CODE_NOT_OK</SAP:Code>
<SAP:P1>500</SAP:P1>
<SAP:P2>Timeout</SAP:P2>
As this is temporary connection problem, we tried resend the message. Then the message went to the status as Canceled u2013 Since already processed.
The Error message is:
<SAP:Code area="MESSAGE">DUPLICATE_DETECTED</SAP:Code>
<SAP:P1>4CA1DDA984FC013EE1008000C02522A4</SAP:P1>
<SAP:P2>RECEIVER</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Message ID 4CA1DDA984FC013EE1008000C02522A4 already exists in called system (pipeline RECEIVER)</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
Please tell me what is the exact problem for this issue.

May be handshake was failed while updating the status of of message in XI after handed over it to target syste, please check the same message in Target system with what time it had got (whether the first time only or after resending it).
regards,
Satya.

Similar Messages

  • Message status in Canceled-Since Already Processed

    Hi All,
    I could see a message is in CANCELED-SINCE ALREADY PROCESSED. What does it mean and why is that its showing in this state, which I have nver seen/come across.
    Regards
    KarthiSP

    Hi Karthi,
    The below discussion might be useful
    DUPLICATE_DETECTED
    regards,
    Harish

  • Ok so it's what 1-25-13 Siri is down... AGAIN for the fourth ever since i got this iPad on Christmas so yea I need her to be back up and running... How do I fix it if you won't.

    Ok so it's what 1-25-13 Siri is down... AGAIN for the fourth ever since i got this iPad on Christmas so yea I need her to

    Randall-
    With some exceptions, Apple may not read this forum.  Many of us here are just people with time on our hands who want to help.
    If your WiFi internet link is not working, Siri will not work.  One thing you can try is to unplug your WiFi router for a few seconds.  Then reset the iPad's network at Settings-General-Reset-Reset Network Settings.  You may have to reconnect the iPad to the WiFi.
    There may be an iOS update beyond 6.0.1, in case that matters.
    Fred

  • I want to install Win7 on my new iMac using bootcamp. I got a USB drive for the win7 install-disc, but I don't own a cd for the Mac OS (since it was preinstalled when I got it). I read somewhere that I need a mac OS disc as well?

    I want to install Win7 on my new iMac using bootcamp. I got a USB drive for the win7 install-disc, but I don't own a cd for the Mac OS (since it was preinstalled when I got it). I read somewhere that I need a mac OS disc as well to complete the bootcamp installation of Win7 ?
    I need some recomendations plz.

    Hello,
    you don't need OS X install-disk, but I strongly recomend to burn a Win 7 disk. You may have some problems with installing it from a USB Flash :)
    Cheers!

  • I cannot sync my iphone to my macbook since the highest software upgrade on it is 10.5.8.  I cannot upgrade to the min. software necessary to upgrade to the itunes version that I need for the iphone 5!  Please help!

    I cannot sync my iphone to my macbook since the highest software upgrade on it is 10.5.8.  I cannot upgrade to the min. software necessary to upgrade to the itunes version that I need for the iphone 5!  Please help! 

    The iPhone 5 requires iTunes 10.7 or later and iTunes 10.7 requires OS X Snow Leopard (10.6.8). If your profile is correct it looks like you need to update your OS X on you Mac. You can contact Apple and purchase the software from them.

  • A realistic assessment of your experiences of hardware needed for the type of editing I do please.

    Introduction:
    I apologise for the length of this post but from experience of reading here, I'm working on the principle of the more I explain about myself now, the less anyone willing to help me will have to ask later.
    I have lurked around this forum on and off for a few years, read the various threads in the FAQ section, particularly PPBM5 and What PC to build thread and other related topics around what system to build.  I have found them very useful and in particular have enjoyed reading about Harm Millaard's experiences First Ideas for a new system.  For about about 12 months I've been delaying upgrading my PC but in Mr Millard's latest updates on his PPBM6 site he talks about new systems and  provides a link to Intel's time line which suggests they are in no rush to replace the i739xx series CPU chip - which has I believe amongst other things 2 cores disabled.  Normally bitter experience has taught me not to rush out and buy the latest technology but let others "test" it first and then benefit from reduced prices as that model is replaced.  However, it now seems like last years technology is going to remain as this years technology and probably the first 2 quarters at least of next year and, if anything, the price of the i739xx series is at best staying at it's existing launch price or even rising.  So it's time to take the plunge for me and upgrade.
    My current hardware for editing:
    I started with Premier 6.5 after I bought it as part of a bundle with a Matrox RTX 10 card - one of the most temperamental pieces of hardware I've had the misfortune to work with.  I later upgraded to Premiere Pro 1.5 and edited with that using a Pentium 4 2.6 (overclocked to 3.2), 3 hard drives (no raid) and 4G of memory.  The video footage used was avi recorded using a Canon MVX 30i and Panasonic NVGS27 and now I've added the Casio Exilim EX -FC100 (mpeg format) and a Panasonic HDC S90 (AVCHD).
    My PC coped with the editing I did with avi footage but couldn't handle AVCHD format and this convinced me to upgrade to Premiere Pro CS5.5.  At the same time I switched to editing on a Dell XPS M1530 (Centrino duo chip) - I upped the memory to 4GB, put Windows 7 64 bit home edition on and replaced the existing hard drive with a faster one.  In addition I use a SATA Quickport duo attached to my laptop via an eSATA card.  However, either the Quickport, eSATA card or XPS is extremely temperamental - I never see two external hard drives, 50% of the time see 1 external drive or none at all - when that happens I edit around it doing things I can with just the one internal drive - but this problem is not my question.
    The type of editing i do:
    I know people usually say around here not to try editing on laptops and believe me, I understand why, but using this setup I have been able to edit lots of videos  - see here for examples of the type of editing I currently do:
    http://www.youtube.com/user/PathfinderPro
    The equipment test videos place the biggest strain on the hardware when editing.  And, to do this editing I have to convert my AVCHD footage in to it's YouTube format before editing and even after I've done that it can be tediously slow to edit and playback even with premiere set to play at 1/4 normal quality.  To convert the AVCHD footage to the YouTube format I edit in has to be done over many nights.
    Now I am not a professional, I typically edit with up to 4 tracks of video with additional tracks for titles and my target audience is YouTube - which is why I can get away without editing in my prefered option of native AVCHD video format.  However, I'm tired of all the waiting, stuttering, and many many days and hours of converting videos into a format I can use so I'm looking to upgrade.  My problem is though I'm uncertain what path to take.  The PPBM results are dominated by overclocked chips, and whilst the motherboard make and model is listed, the hard disks used, graphic card makes and models and memory modules are not.  This is not a criticism of the PPMB tables (big thank you to Bill Gehrke & Harm Millaard for taking the time and effort to pull this much information together) but for me, I am not interested in being in the top 1000 in the world, nor overclocking like mad, and having had horror experiences of using matrox products and compatibility and stability issues with other hardware I'm more interested in compatability and practicality than speed when deciding what to build.  I've also read the threads about marvel controllers, dual and quad channel memory support, the pro's and cons of SSD or standard drives, raid setups, the heat problems with overclocking the newer ivy bridge chips and general build advice etc so I'm not coming here without having done some reading first.
    The type of system I'm thinking of:
    So far based on what I've read here, I've come to the conclusion - but I'm open to suggestion:
    - Chip - regrettably due to the cost and unlikely successor anytime soon - a 39xx (with appropriate cooler) because I want to edit in native AVCHD which seems to require the warrior type chip as opposed to the "economical" build regardless of what my target audience is and this suggests
    - X79 motherboard (which must have an old PCI slot such as the Asus Sabertooth and which has room for the cooler I'm considering).  As I will be carrying over my old terretec DMX 6 fire 24/96 soundcard - all my videos have their audio mastered in Audition using this card - best piece of advice I read was the audience will watch a bad video with good sound editing but not the other way round)
    - 4 hard drives plus additional hard drive for operating system using onboard raid controllers (not sure whether the operating system drive will be WD caviar black or SSD and can't justify cost of external raid controller for either my type of use or number of hard drives being used)
    - Video card - I can now buy a GTX 580 for less than the 670 - so not sure on the card especially based on Harm Millards observations that memory bandwith seems to be as important as CUDA cores
    - Case - I have an Akasa 62 case with room for 5 hard drives - I won't be exceeding that, and if I overclock it will only be by a little so is it really necessary to replace it for a Tower Case - although I would prefer a case with a front connection for esata so I may have to change the case regardless
    - Maximum memory 32G - so is it necessary to upgrade to windows 7 professional?
    - Power source - I'll work out when I've decided on my components.
    Help please:
    For me it's video source/dictated software chosen and hardware/audience(youtube) dictates format edited in.  As I don't intend to change my camcorders format (AVCHD or mpeg) in the next couple of years and I'm not interested in having the "fastest" system around what I'm really interested in learning is:
    what system setups people use now for doing similar editing to me
    what make/models of the component parts in your system work well together
    and if you do have a bottle neck in terms of hardware, where is it and what hardware would you change to  (not a dream model change, just a practical and realistic one)
    I have deliberately not given a budget for the changes I'm intending because budget should not be the deciding factor in determining what I "need" to upgrade to for the "type of editing I do" - especially bearing in mind I've got by so far (admitedly at a tortoise pace) with by todays standards a standard spec laptop.  Basically I don't want a Rolls Royce to go shopping at Wallmart but I'm tired of walking there and carrying everything back by hand!
    Thank you very much for any help / experiences people can share.

    Thank you both for your prompt and helpful replies.
    Mr Millaard, regarding your excellent article Planning and Building an NLE system, I have read it a couple of times now and it was your article which finally convinced me the time was now to upgrade but within it you said for good reason "Initial choice of CPU: i7-39xx with the intention to overclock to 4.6 - 4.8 GHz", hence my uncertainty about the CPU to use.  I have seen a video you posted here  - I think it was based on your cats (which I incidently enjoyed) so working on the editing done there (but not remembering if you mentioned what video format you used) and others who have mentioned many pro's for the i7-39xx I was leaning towards that - but I'm financially relieved at least - if the i3770 will do, although now with the possible recommendation by JEShort01 (sorry not sure of the forum etiquette for use of names) of the 2600K overclocked I'm a little bit back in the position of which is more suitable especially with the update to the i3770 being nearer than i7-39xx.  This still makes me lean towards the i7-39xx.
    Regarding the editing, the match play you can see on the channel is indeed 1 camera basic edits - multiple titles used to provide the score board.  However, the coaching videos use mulitple cameras - 3 to 4 sometimes (another reason for upgrading to CS5.5 for the multi cam editing support) and the equipment testing video can use 3 or 4 tracks layered on top of each other other with each track having opacity settings and multiple motion effects and titles with occasional keying video effects added.  For example this video at approx 2 mins 50 and 5 mins 10 seconds.
    http://www.youtube.com/watch?v=T1E5T7xo57c&list=PL577F7AB5E31FC5E9&index=13&feature=plpp_v ideo
    Monitor wise I use dual monitor setup.  My laptop screen and I link out to an LG M2394 D for widescreen and I sometimes use an old Neovo F-419 for 3 / 4 editing.  I won't be using more monitors than 2.  If the 580 drops a bit more I'll probably go for that - although I'll have to make sure it's size isn't an issue for the motherboard combo setup.  Interestingly there is a thread shown on the forum home page which discusses the 570 vs the 660ti and the opinion was go with the 660ti which surprised me a bit.
    Windows 7 professional it is then - I should have known that too - apologises for asking a question already asked.
    "Accepted, your correct criticism of the lacking hardware info on the PPBM5 website. That is the overriding reason that for the new site http://ppbm7.com/ we want to use Piriform Speccy .xml results to gather more, more accurate and more detailed hardware info."
    No criticism intended Mr Millaard - more an observation and I really look forward to that evolution with PPBM7.  I'm assuming the .xml results will use pre populated drop down lists people can select their hardware from - that way you can control and ensure consistent entries - downside being the work required by you to populate the lists in the first place and maintain them.
    Thanks again for your help but I'm still unsure a bit about the CPU and video card though.

  • Help needed for THE decision

    Hi everyone ☺
    I’m finally planning to start recording what I play, and after some hours of wandering on the web I found some interesting possibilities. Now what I need is to decide which one is more suitable for my needs, and here comes the moment for apple discussions
    Basically, I will record my own music one track/instrument at a time (I’m still not able to play more than one…and I dont’ want to spend 2.000$ to buy a 24-ins device just to record drum tracks), I’d like to have a software with built-in effects for guitar/bass/voice, integrated soundtrack possibilities (to play with video recordings), mixing options for both stereo and surround mixing, and I don’t want any card to be placed into my mac. Well, and obviously the sound quality must be pro-like…as anyone probably wants.
    So, here’s what I came up with:
    a) getting logic pro studio 8 and apogee duet
    b) getting pro tools m-powered and mbox 2
    c) getting one of the two softwares and a Monster iStudioLink Instrument cable and plug instruments directly into the mac
    Now, the questions are:
    if I can plug an instrument directly into my mac and control all parameters via one of the two softwares, what do tools like duet and mbox2 serve for?
    In the case this tools are useful [ ☺ ], why ☺ … and which is the couple software/hardware that can best suit my needs?
    I assume that every software has a proprietary file extension in which audio tracks are saved, so that it should be impossible to record an audio track with one software and edit it with another that has different functions/plugins (ex. from logic to pro tools, from pro tools to cakewalk sonar which I have on a pc etc.). Am I right, or is there any “standard”, non compressed high quality file type in which track can be saved and exported to be edited with different softwares?
    I know that from this post it may easily seem that I’m a hopeless digital idiot, but I swear the situation is not really that bad so no need for the kind of explanations with drawings like the ones you find in the “for dummies” guides lol so every experts’ advice will be greatly appreciated
    Neptune

    Thank you Bee Jay and Pancenter for the lighting-fast and useful answers
    now I am aware that an interface IS NEEDED lol (that means they are not produced without a reasons, are they?). I know Pro Tools is the industry standard but I don't like anyone/anything to tie me to their choices/interests (so that's why I was asking about Pro Tools, knowing that there's some sort of "hardware threat"). What I look for is just quality and if I understood what you both mean, as far as this aspect is concerned, Logic and Pro Tools are substantially comparable...isn't it? On the interfaces side, I already checked the Saffire ones (they seem quite good, and cross-platform use is definitely a plus), I will check the others mentioned and will let you know In fact, I didn't consider the "platform problem" but, as I wrote, I also own a PC with an Audigy 2 soundcard (midi/analog/optical/digital inputs/outputs and firewire port...not Madonna's private studio, but not as sad as Mac's little hole) and Sonar 6 Producer Edition, so that has been a really good point to ponder. And now, in the middle of this software/hardware battle...any personal suggestions based on tests/personal experience?

  • The need for the option to purchase perpetual license of Production Bundle

    My business has used Adobe products for 15 years. I am a big fan. But I wish to continue purchasing the Production Bundle line of products with perpetual licenses. I have no need for the Cloud. I also want to upgrade from my current version of CS6 as I have done in the past, for about $350. Month to month rental does not work for my business. I also dont feel paying $600 for the Cloud is appropriate since my standard yeaarly upgrades are usually $350. If you folks dont give me a choice I will have to end my use of Adobe software. Many other professionals feel the same way. Please give us an option for ownership. Otherwise you may find you have a mass exodus from folks that have happily purchased your product for years.

    Hi Todd and 001andrew,
    I was going through the discussion we were having in last 4-5 post in this thread and it made me reply to your query and concerns.
    I think you are mixing up 2 things here "Adobe Creative Cloud" and "Adobe Marketing cloud". Creative cloud comes under Digital Media whereas Marketing cloud comes under Digital Marketing.
    Adobe® Marketing Cloud gives you a complete set of analytics, social, advertising, targeting, and web experience management solutions and a real-time dashboard that brings together everything you need to know about your marketing campaigns. So you can get from data to insights to action, faster and smarter than ever.
    You can explore more about Marketing cloud on the following link:
    http://www.adobe.com/in/solutions/digital-marketing.html
    On the other hand Creative cloud gives you a simple membership which gives you the entire collection of CS6 tools and more. be it print or Interested in websites and iPad apps or Ready to edit video? You can do it all. Plus, Creative Cloud members automatically get access to new products and exclusive updates as soon as they’re released. And, with cloud storage and the ability to sync to any device, your files are always right where you need them.
    Adobe Creative Cloud is an ongoing membership that gives your team access to all the Adobe Creative Suite® 6 desktop applications, plus other tools and services including Adobe Muse, Adobe Acrobat XI and Adobe Photoshop Lightroom 4 software, Adobe Edge Tools & Services, and more. Creative Cloud also includes new Internet-based services* and enables the delivery of high-impact content experiences such as interactive websites and stunning digital magazines. By offering connectivity with Adobe Touch Apps†, headlined by Adobe Photoshop Touch, Creative Cloud enables a mobile workflow, from ideation to publishing, to bring the power of Adobe innovation to iPad devices and Android™ tablets. Creative Cloud gives you freedom to create, offering immediate and ongoing access to industry-defining tools and technologies, to serve a vibrant worldwide community of creative talent.
    to know more about the creative cloud offering you can visit:
    http://www.adobe.com/products/creativecloud/buying-guide.html
    Hope this helps you to understand the concept.
    Also on the point where you have mentioned that where Adobe's Quarter result indicate that "Deferred revenue grew by $80.5 million to a record $700.0 million. " This Mean that Adobe has invested a lot in new offerings which is a liability as of now and this will turn into regular revenue in the future financial results.
    Just to make it easy to understand deferred revenue means that we have advance payments or unearned revenue, recorded on the Adobe's balance sheet as a liability, until the services have been rendered or products have been delivered. Deferred revenue is a liability because it refers to revenue that has not yet been earned, but represents products or services that are owed to the customer. As the product or service is delivered over time, it is recognized as revenue on the income statement.
    Companies generally have sizable amounts of deferred revenues on their balance sheets, typically representing license fees and annual maintenance charges. Analysts study trends in deferred revenues of such companies for a better indication of their financial performance.
    So yes it is a good indication for Adobe and promise a great results in future. And obvously we can do it only with our esteemed and respected customers coming along in this great journey for Adobe.
    Cheers!!
    Kapil Malik

  • How can I create a Face Time account.  I have an Apple ID and password.  When I Google how to create an account all I get is what I need for the system

    I have a 13" MacPro.  How can I create a Face Time account.  I have an Apple ID and password.  When I Google how to create an account all I get is what I need for the system

    You don't need to create an account.   Your use your Apple ID to log into Facetime.
    If you haven't already you will need to download the Facetime App from the Mac App Store.
    https://itunes.apple.com/us/app/facetime/id414307850?mt=12&ls=1
    FaceTime for Mac: Troubleshooting FaceTime - Apple Support

  • Can anyone tell me the mAh needed for the iPhone 5?

    I am looking to purchase an Emergency USB cell phone charger and want to make sure there is enough power (but not too much) in the device.  I can't seem to find the answer yet???  I purchased one and it did not say anything about how much power it has but it did say it will work with the iPhone 5.  I should know better than to believe something that an after-market manufacturer posted but I was hopeful.  It worked from 0 battery to 12% and then said "not compatible with this phone" (or something like that). 
    I am not knowledgeable about power, iPhones, horse training and many other things , but I hope to learn on this forum since I just bought my first iPhone and am trying to figure all this out.  I need to be able to carry a power source with me when I am away from electrical outlets and such.
    Any input is mucho appreciatedo!   Thanks!

    Thanks Peter, but what I am looking for is something like http://www.amazon.com/Portable-Battery-Powered-Emergency-Flashlight/dp/B003ZUPDR 2.  I would like an external pack that takes batteries and can be quickly used to recharge my iPhone 5.  There are a lot of them like this one on the market but I need to figure out the power specifics needed for the iPhone 5.  I will also be buying these for gifts for about 45 people for an event this summer so I am doing the testing with my iPhone and hoping to find something like this.

  • My Iphone 4 just updated to the iOS6.  I've connected it to my computer for the first time since then, and wanted to back up my photos in iPhoto.  However, although Iphoto recognized my phone, it shows no photos to upload or backup. ??

    My Iphone 4 just updated to the iOS6.  I've connected it to my computer for the first time since then, and wanted to back up my photos in iPhoto.  However, although Iphoto recognized my phone, it shows no photos to upload or backup.  It lists my phone in the "devices" category on the left bar, but no longer shows any of my photos.
    Does anyone have any suggestions?

    I've reread your question several times and am not sure I understand it.
    Are you trying to basically start over, as if you just took your iPhone out of the box?  If so, do:
    Settings > General > Reset > Erase all content and settings

  • Hi have just purchased iphone 4s . my itunes on my mac is currently 10.4 . 10.5 is needed for the new iphone but when i download it and click on install the itunes about still says 10.4 . have tried to update through itunes but it says there is no softwar

    hi have just purchased iphone 4s . my itunes on my mac is currently 10.4 . 10.5 is needed for the new iphone but when i download it and click on install the itunes about still says 10.4 . have tried to update through itunes but it says there is no software available for me . please help . mr frustrated

    If your computer is running an OS X prior to Snow Leopard 10.6,
    the answer (if it is an Intel-based Mac; not old PowerPC model)
    would be to buy the retail Snow Leopard 10.6 DVD from Apple
    for about $20, and install it. Then update that to 10.6.8 by using
    the installed Snow Leopard online to get Combo Update v1.1 for
    Snow Leopard 10.6.8. After that is installed & updated, run the
    system's Software Update again, to see what else is available to
    that system.
    Later systems can then be looked into at Mac App Store, once
    the computer is running Snow Leopard 10.6.8.
    And if your computer is a Power PC (G4/G5, etc) and has no
    Core2Duo kind of CPU -- See "About this Mac" in apple menu
    to disclose the general info about your Mac. Also you can see
    even more by clicking on "More Info" when looking in there...
    If it isn't an Intel-based Mac, it can't run a system past 10.5.8.
    Hopefully this helps.
    Good luck & happy computing!

  • LabView "Guru" needed for the summer (4 month project) Kalamazoo, MI

    LabView "Guru" needed for the summer (4 month project)
    I am looking to hire a LabView "Guru" for a summer project in Kalamazoo, MI that will last 4 months.  Specifically, the ideal person will have the following:
    LabView expert with a minimum of 7-15 years of experience working with LabView (currently using version 6.1).
    80% of the job will be dissecting and interpreting mature LabView code and then re-engineering it to be used for testing.
    Printed Circuit Board experience a plus.
    4 year degree (BSEE preferred, but expertise in LabView takes priority over degree)
    The pay will be $60/hr and you can plan on overtime of at least 10 hrs each week that will be paid at $90/hr. 
    Please call 616-855-4600 if you need more information and email a "word" copy of your resume to [email protected]

    Sounds like Parker-Abex (LabVIEW 6.1 part)
    Putnam
    Certified LabVIEW Developer
    Senior Test Engineer
    Currently using LV 6.1-LabVIEW 2012, RT8.5
    LabVIEW Champion

  • Software needed for the USB device, "USB Interface Controller TEST2.0"

    My mother recently acquired a digital camera. She acquired it from a second-hand store, which did not include an interface cable or software. The manual (and the USB port on the camera) indicates that a male-male USB cable is necessary for photos to be copied to the hard drive.
    I was not successful in locating such a cable at any local electronics store (I assume such a cable is now out-of-date). I purchased one from a seller on eBay. The brand is "e circuit electronics".
    Upon powering up the camera with the cable connected to it and the computer, the following message appeared:
    "Software needed for the USB device "USB Interface Controller TEST2.0" is not available. Would you like to look for the software on the Internet?"
    I clicked "Yes". After an approximate two-minute wait, another message appeared stating:
    "Software Update is not able to connect to the Internet. Please check your configuration and try again."
    I deleted, "Software Update Preferences" in the Preferences folder inside the System Folder, without solving the problem. How do I solve the issue of allowing Software Update to connect to the Internet?

    Thank you for your continued assistance, BDAqua. Unfortunately, the driver you linked to does not seem to be compatible with the camera. It is a driver for the V20 model, whereas my model would correspond to be a V2755, as referenced from a list of other Vivicam models when during a search at the Open Drivers web site.
    From the system requirement about the card reader you gave me, it will not work, as this system is running 9.1. I am hesistant to upgrade this computer to 9.2, as I have experienced system unstability with that version, with even the 9.2.2 update applied.
    In the mean time, I have e-mailed Vivitar regarding this issue, but have as of yet received a reply.
    I am not certain as to other specifics to give you, in order to solve the Software Update problem. Please elaborate.
    Yes eww, the computer in question is able to fully connect to the Internet for all that I need. I am fully aware of the difference between a computer connecting to the Internet, and a computer connecting to a digital camera. I have 15 years of Macintosh experience.

  • How do you suppress page numbers. I am trying to print a screenplay for the first time since switching to Pages and I can't suppress Page

    How do you suppress page numbers. I am trying to print a screenplay for the first time since switching to Pages and I can't suppress Page #1 without making the rest of the pages inaccurate, as page #1 is the Title Page. Does anyone have any suggestions?

    When you signed to be able to post in the forums, you were urged to read and accept the Terms of Use ruling these forums.
    They claim :
    The contents of the "More Like This" box prove that applying the rules you would have get the wanted explanations without creating this new thread.
    Yvan KOENIG (VALLAURIS, France) mardi 26 avril 2011 10:04:03

Maybe you are looking for

  • Holding the value in screen-field

    Dear All, I m facing the problem ,while i m putting the value in screen-field and then pressing enter, value in that screen-field is becoming null automatically. wht shld i do for holding the value even after PAI. Thanks in advance.

  • Reading dynamic table column based on user selection

    Hi there, I am having a problem of reading and manipulating the data stored in a standard SAP table. The following example simulates the table and what i am trying to do: Table: Storing sales data for sales person SALES_PERSON    REGION   YEAR   MTH_

  • Upgrading OS Mountain Lion - Network problems

    Dear all, I've upgraded my iMAC last week-end. Good job But... big network problem with ADSL connexion via ethernet I've installed a CPL network at home because WI-FI range is blocked by big walls. Then no problem before (Modem Belkin connected on ti

  • I need a program that will open .itl

    I need the "appropriate program" to access my: NAME: iTunes 4 Music Library.itl TYPE: iTunes Music Database File Somebody will me somethingI can use. I've been working on this ALL day!!!

  • Published topic is blank until I right-click

    We have several projects published with either RH9 or RH10 and viewing them in IE8. Some of the topics are short and link to other topics in another project. The content looks like this: For information on this topic, please refer to the System onlin