Reason rewire not working with Logic 9.1.8,Help!

I need help on Rewiring Reason 6.5.3 with Logic 9.1.8
I've done everything that's been told how to rewire Reason and Logic (tutorials on youtube / on the Propellerhead website) I had no problem with it before 6.5 / 6.5.1
But after I updated to 6.5.3.I just cant get rewire working. When I click Reason after I open Logic. The Logic library is empty. I do have automap 4 as well. I'm not sure if that's the problem.
I even checked Reason's Option>Sync. Rewire is not able to be selected and the rewire light on the hardware interface is never on.
I've tried uninstall reinstall from 6.5 ,but still not working.....
Can someone help.....This is suppose to be easy.....Thanks!
2 x 3.2 GHz Quad-Core Intel Xeon 8 GB 800 MHzDDR2 FB-DIMM

http://documentation.apple.com/en/logicpro/usermanual/index.html#chapter=10%26se ction=11%26tasks=true
See if the above link helps

Similar Messages

Behringer UCA200 not working with Logic

I recently received a Behringer 1222FX mixing board for christmas. It came with a UCA200 which is a little RCA-USB product. I want to use this board with Logic 9 but i can't seem to get it to work. I added a track and selected Input 1 but when i hit record the only sound that was recorded was from the internal computer speakers.
I have already tried the board with Garageband and it worked fine. I was wondering if anyone would steer me in the right direction and help me get this to work with Logic.
Please note that this question maybe simple to answer as I am new to Logic.
Thank You

Chance has it I just tested the UCA-200, and its' quality is very clearly inferior to my ancient Macs' built in 16 bits audio. So don't use it, use the Macs' own built in audio instead. Chances are that the BIA of your Mac is 24 bits (which Mac do you have?), whereas the UCA200 is only 16 bits. That thing is only an improvement if you have an old PC with 8-bits audio. Sorry Uli (Behringer).
regards, Erik.

Melodyne 2.6 not working with Logic 7.1.1

Hi,
those of you who are using Melodyne with Logic and Tiger, does it
work with the Bridge mode ?
I've been trying it now with several different takes and all I get
out of it is sort of a hummingbird like a whistle
or pigs been strangled..take your pick..is it just me ??
It's the 2.6.0.6 Bridge version with Logic 7.1.1 and Tiger 10.4.2.
Thanks

Wll first answering my own question I may have found out the culprit.
After launching my mLan auto connector and looking at MIDI/Audio set up I found that even Logic was working allright with my 01X though it still insisted I was using Internal audio instead of mLan. After changing that, the first and so far only test, I was able to use Melodyne OK.
Otherwise I repeat what others already said here that although Logic lists Melodyne 2.6.0.6 as incompatible it will work.
I guess now that v3 is due out in about a month we'll never see the 2.6. updated to fully work with Logic 7.

Apple 23 Cinema not working with nvidia 5200...help!!!

Hey all!
I have an Apple 23" Cinema that is not working with my Windows XP machine using an NVIDIA 5200 128meg graphics card. The montior, when booting Windows, just flashes its power light 3 times...goes off...then repeats the sequence.
So, I tried a Dell 2007WFP with the XP machine using the DVI port of the card. When booting, it seems like it's going to fire up the monitor (shows splash screen and Windows logo) but then goes blank when it hits the desktop.
Oddly enough, when I plug in my Apple 30" into the DVI port of the NVIDIA card, it works just great. No fuss or muss (other than a resolution change).
The 23" also works fine with my MacPro BTW so I know the monitor is golden.
Any takers on this one?
Thanks in advance!

Hi Talon, I just accidentally came across your thread. Maybe I can help. I own a 23-inch cinema HD display but mine is ADC and I have to run mine through an ADC to DVI adapter.
Anyways on to the discussion...
The nvidia 5200 is a rather old-ish card (or chipset). The feature set in these older cards are not necessarily symmetrically reciprocal (what?) throughout the feature set. In other words, the feature may work in one mode and not in the another mode...etc...
You may have seen these specs on your 5200 card/chipset:
+Dual RAMDACs (up to 400 MHz) for display resolutions up to and including 2048×1536 @ 85Hz+
and thought this would be great, my resolution is less than that @ 1920x1200 on my 23-inch cinema display. However I believe this may be referring only to the vga output signal and not the DVI. Read on...
Further down in the specs for the 5200 card/chipset you'll see:
+DVI support for compatibility with nextgeneration flat panel displays with resolutions up to and including 1600×1200+
Unfortunately, this is not enough resolution to power your 23-inch display at 1920x1200. Windows may even show the resolution 1920x1200 as available (if you're able to get to the screen) but what I think it's not telling you, it that in order for you to be able to use that resolution you'll need to switch to dual mode DVI, and the card does this automatically.
For example: 640x800 to 1600x1200 uses single mode DVI and anything above that (like our 23-inch cinema HD monitors @ 1920x1200) +using this particular card/chipset+ will be using dual mode DVI whether the monitor can support that mode or not. From my experience with my HD cinema it uses single mode DVI.
As someone said above your 23-inch is in *single mode DVI* and from my experience only accepts *single mode DVI input* from the graphics card.
From my understanding of the specs and your description of the delimma, I would suppose that you are able to get the 30 inch display to work because the 30 inch is a *dual mode DVI monitor* and your graphics card does work in dual DVI mode up to your 30-inch resolution but ONLY in dual DVI mode.
Here are the specs on it:
http://www.nvidia.com/page/pg_20040109440047.html
I hope this helps you out.
If you were to ask my recommendation, I'd go buy a new video card that has higher resolution on the single mode DVI output. I can tell you that my ATI 2600 HD Pro (AGP) (windows version, not mac only) has two DVI ports that are both dual mode DVI capable but also dumb down to single mode DVI signaling at high enough resolution to support our 23-inch cinema HD single mode DVI displays.
Good luck!
Dibit

Novation Remote 25SL Not Working with Logic Pro (Logic Automap)

Hi,
I can't seem to get my new Novation Remote 25 SL to work in Logic Automap mode.
I have the Remote SL in Logic AutoMap (template #39). When I launch Logic Pro 7, The Remote SL shows : "Logic AutoMap" on the Left LCD display, and nothing else happens, it seems to be frozen at this state. The Up/Down arrows on the Left side don't change anything.
Any clues why this is happening ?
I have read many posts on this and other forums of user issues in setting the Remote up properly, and have it work in Logic Automode. Tried many configurations, and settings, re-installed sw, OS 1.0.13, but no luck so far.
I would like to hear from Logic Pro 7 users who have successfully setup their Remote SL with Logic Pro 7.2.1 in Logic Automode, and are working with this system without any issues.
This will be very helpful in figuring out if there is something wrong in my settings, or if the unit itself is defective, or I am doing something wrong during the installation of the software ? I have been trying to get this thing to work for the past two days, with no success so far.
The Remote SL should be a wonderful controller for Logic Pro 7 (once it works !) so, I'm being as patient as I can with this thing.
I'm using Logic pro 7.2.1 on a Mac G5 2.5 Quad, Mac OSX 10.4.6
Thanks.

Hi Blaze,
I tried your settings, but no change, the Remote SL is still frozen showing :
"Logic Automap" on the left LCD .
You mention setting "Mixer View 64" well the parameter I see is called :
"Mixer View Fader" which I guess is the same one you are referring to. I set it to 64, it was set to 8, but has not changed anything. Still having the same problem. This problem is dragging into Day 3, what a bummer.
Thanks.

Euphonix not working with logic

Please help.
I cannot figure this out. I have a MC control artist series with two MX mix connected via ethernet switch.
1) EuCon software crashes a lot (often together with logic). The software and firmware is up to date.
2) The MC shows that its connected with logic but suddenly the touchscreen doesn't show any functions anymore. And the MC mix display doen't show the tracks. And yes, Logic is always on top.
The faders do not respond. When I switch to the finder and go back to the application the Euphonix works for half a minute, than the same problem again.
This happens on my G5 as well as on my new iMac (Mac OS 10.5.8) and it was the same problem with 10.5.6.
I appreciate your feedback,
desperately Eddie

Eddie Eagle wrote:
Please help.
I cannot figure this out. I have a MC control artist series with two MX mix connected via ethernet switch.
1) EuCon software crashes a lot (often together with logic). The software and firmware is up to date.
2) The MC shows that its connected with logic but suddenly the touchscreen doesn't show any functions anymore. And the MC mix display doen't show the tracks. And yes, Logic is always on top.
The faders do not respond. When I switch to the finder and go back to the application the Euphonix works for half a minute, than the same problem again.
This happens on my G5 as well as on my new iMac (Mac OS 10.5.8) and it was the same problem with 10.5.6.
I appreciate your feedback,
desperately Eddie
Hi,
You might want to go back a version or two of the EuCon software, since you are on 10.4.11 or at least your signature says so...
Also check the ethernet cables, make sure they're connected properly.
Please contact Euphonix for further support on this.
Cheers

USB Interface Not Working With Logic Pro 9

Hello,
I've had a Tascam US-1641 for several years now with absolutely zero issues on my old PC. Ever since I upgraded to Mac (early 2011 17 inch Macbook Pro running Snow Leopard) I've had nothing but problems with the US-1641. No matter how many times I uninstall-reinstall the drivers and what USB port I plug it into, whenever I turn on the device and it's connected to my Macbook, it crashes my operating system and it freezes everything I was doing. Logic Pro doesn't load and when it sometimes does (10 minutes later), it immediately crashes when I click anything.
I've tried several tips to fix it and nothing worked. The most popular choice was select the default input/output in Logic to the system audio, then quit Logic, turn on the interface, then restart Logic. No such luck. I have to reboot my machine at least 5 times, uninstall/reinstall the driver and hope it works to use the interface. I thought it was the operating system, so I upgraded to Mountain Lion and installed the new driver for Mountain Lion, after of course deleting the other drivers and removing all previous data, and it is still giving me the same problems.
I don't have the money to afford a replacement model or a different interface from a different company, so I'm hoping you guys can help me figure out what exactly it is that's causing the interface to freeze my operating system and crashing my Mac whenever I try to use it. I am getting extremely frustrated at this and as much as I love OSX and Logic, what good is this piece of software if I can't use it? I need help.
Thank you.

The problem lies with Tascam and their inability to write stable drivers for OS X... and isn't anything to do with Logic Pro ..
As you know, you are not the only person to have had this issue and the reality is, while the 1641 might work fine with Windows, when it comes to OS X Macs.. it's an entirely different story... depending on the version of OS XS you are running.
The one tip I have read, that seemed to fix it for most people.. (Though not all) is as follows;
(Thanks to Paulypaulpaul for this)
-uninstall your tascam driver 2.10
-restart
-install driver 1.03
-restart
-plug in your tascam
-goto where you download your drivers (http://tascam.com/product/us-1641/downloads/), scroll down to the bottom where it says firmware, Download the firmware 1.02 (3rd from top under firmware), install it. your control panal should now read 1.03 for your drivers and 1.02 for your firmware.
-install drivers 2.10
-restart
Follow each of the steps exactly.. including all restarts when indicated..
...and good luck...

Garritan, Aria Player not working with Logic Pro X

heading says it all. Spent all day downloading latest Arai PPlayer and Logic will not recognise...
Currently ARIA works with Windows 64 bit, but not yet with Mac 64 bit OS.
There is this in the pdg Manual...
Steve

Sorry, that's the only option I didn't cover in my answer - I should have said: fades only work on unflexed audio regions that are not in take folders.
You can create a comp, export or flatten that and create takes on the exported track/regions, but you can't create fades inside take folders.

Apple remote is not working with Logic Pro 8

Hi all
Anyone any idea why, it would really help me as I need to remotely activate the record button. Many thanks Dave

My guess: it is simply not compatible with 10.6.8 (which was released well after Logic Pro 8)

Please help... jam packs not working with logic express 8

my jam packs do not work. i go to the library tab, open one of the jam packs category, "Symphony Orchestra" for example. i choose an instrument folder ("strings" for example), and then an instrument. a window pops up and says "File not found... Result code = -43". What does this mean? What can i do to fix it?
You my also know that the jam packs work fine in Garage Band.

Hi,
on a UNIX based system, every file has it's own set of permissions who own it, who can read it or who can write to it. Sometimes, things get corrupted (often during an install or update, when administrator rights are used or not used....)
However: Open the Harddisk Utility in the Applications/Utilities Folder. Select your Harddisk and klick on "repair permissions". Wait for some minutes (takes some time).
You should do this not only now, but before and after every major update/change to your system.
The next step, if this doesn't work, would be to manually locate the files EXS24 is missing, but for this better ask someone in the Logic Pro forum.
Fox

Geforce 750ti not working with HP P7-1240, please help!!!

I just got a EFGA Geforce 750Ti to replace the XFX Radeon HD5670 that I had in my HP p7-1240 (Got it in 2012, AMD A10 3.4ghz quad core, 10gb ram, HD 7660 graphics, system bios 7.07, updated to windows 8.1, etc)
I have been building computers for 20 years and this process is not foreign to me. I uninstalled the XFX drivers, put in the Geforce and it should of worked, but alas it did not. Instead it beeped, went to the HP blue load screen, stays there beeps and after a minute or two goes black. I have read all of the threads related to this issue and haven't found a conclusive answer.
This card is supposed to work fine with my computer's 300w PSU. Some people reported that other models of HP desktops needed a bios update, but HP doesn't seem to have one for my specific model. My motherboard is PCI-16 2.0 and that should also be fine...
I would love to actually get this thing working rather than returning it and going without...I would also love for someone at HP to comment on how to specifically remedy this.

Nope, it is not compatible with your PC. The 700 series card ship out with full UEFI vBIOS support, which the version 7 BIOS doesn't support. For some reason HP will not release the version 8 BIOS for these not-so-old PCs.
I would suggest buying the 600 series instead. They are almost the same as the 700s, however they do not ship with UEFI support, so it will work for you.
Also, that 300w PSU is not a good idea to keep using. If you were going to use that 750 Ti, you would have needed a minimum of 600w. You'll need about a 500w PSU for the 600 cards.

Vista Ultimate, Firefox 4.01 just installed. The back and forward buttons do not work with this new installation. Help please.

O?S is Vista Ultimate 32 bit fully updated. I have just installed Firefox 4.01. I have lost use of back and forward buttons - they are greyed out. Is there a solution please?

It is possible to have earlier data in a tab if the latest tab had target="_top" that means the back key will not work, but if your right-click on the back/forward you see a context menu. As far as I know the only difference between 3.6 and 4.0 ws that the drop-down arrow was dropped but like before you can still right-click.
There are some extensions that mess with the Back/Forward buttons.
There is a difference between gray and '''black''' on the buttons, '''black''' means there is history in that direction.
You can make Firefox 4.0.1 and Firefox 5.0 look like Firefox 3.6.17, see numbered items 1-10 in the following topic [http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface Fix Firefox 4.0 toolbar user interface, problems (Make Firefox 4.0 look like 3.6)]

My email is not working with os x lion - pls help

My email has stopped working since I upgraded to OS X Lion. Any ideas on what I can do to get it working again?

I am having exactly the same problem - and have noticed that several others are retporting similar problems in other forums. Unfortunately, there still appears to be no solution.
Since I loaded Lion, when I open Mail I simply get a toolbar but no message window. When I select CMD + 0 I get a blank window with with "no mailbox selected" on the top of it. Mail preferences does not work neither do most of the other view options. Curiously, it does seem to allow me to create and send a new mail message... although I cannot see anything once it has gone.
This is desperately important for me. My business depends on email correspondence.
Come on Apple... this software should have been stress-tested to prevent this kind of thing from happening!
(Machine: MacBook Pro i5, RAM: 8GB)

Ipod touch not working with old ipod accessories..help?

I just got an ipod touch for xmas. I realized that I had all these accessories that worked with my old 20g black and white ipod with the click wheel. I had an ihome, ihome to go, and a $40 portable charger. The ihomes will play the music when i plug it in, but they will not charge it, like they did previously. My $40 charger doesnt charge it. I am going away and I need the charger to work. Does anyone know how to make it work or have the same problem? Thanks...

I just tried my iHome and it plays my music and it looks like its charging it. Also my third party docking station made by Tatil works also.
Message was edited by: stefonhim

Adobe 11 is not working with Firefox 16 could anyone help me fix the problem?

It will tell me that adobe will not run with this browser

Hello blair507, see [https://support.mozilla.org/en-US/kb/pdf-files-are-blank-and-cant-be-downloaded-mac#os=mac&browser=fx16 PDF files are blank and can't be downloaded on Mac]
[https://support.mozilla.org/en-US/kb/view-pdf-files-firefox-without-downloading-them#os=mac&browser=fx16 View PDF files in Firefox without downloading them]
try the excellent [http://www.schubert-it.com/pluginpdf/ Schubert|it PDF Browser Plugin] (it is only for mac)
thank you

Reason rewire not working with Logic 9.1.8,Help!

Similar Messages

Maybe you are looking for