Rebate account determination
Hi,
I am trying to create rebate based on customer ..agreement type 0003.
First I created rebate agreement number and condition record for the customer
I created Sales order ...when I was trying billing ..I got the error in account determination. For that I checked VKOA and assigned GL account for account key for ERU and ERB.
Again with new sales order , I checked the pricing condition type BO03...I got the messge --- requirement 24 not met .
what could be reason. Pls help to clarify.
Thanks,
Hi Murugan Ram,
Go to Particular Pricing Procedure in which the Condition type BO03 is existed and then check the Requirement 24 - wat it was because hope you are aware that this condition type is control using this 24 Requirement.
Please take your Abapers help in this regards and do necessaryly.
Hope this clarifies your doubts and Please Reward If Really Helpful,
Thanks and Regards,
Sateesh.Kandula
Similar Messages
-
Account determination --Rebate
Hii guys i have createe a rebate agreement(material)......when i create a billing doc the condition type reflects in billing but no account determination is done ..says error in A/c determination........
1)I would like to know which accounts should be hit
2)I think one is regualar revenue account .......where do the accrualss go
pls do help
Regards
maddythnkss sasmita i have done all the assignments as per ur instructions(the FI guyss are not srnd for 2 days and i dont wanna wait hence doing it myself) but now i am gettin a new error which is as follows
Field Text is a required field for G/L account VINA 89000
Message no. F5808
Diagnosis
The value for field "Text" in the interface to Financial Accounting is an initial value but you are required to make an entry in the field selection for G/L account "89000" in company code "VINA" linked to the field selection for posting key "50".
System response
Error
Procedure
It might be an error in the configuration of the G/L account field selection. The initial application, used to call up the interface must otherwise define a value for field "Text". If this is the case, contact the consultant responsible for the application used to call up the interface or get in contact with SAP directly.
do u get what it meanss if yess plss do let me knw
Regards
Maddy -
Error in account determination while billing posting which includes rebate
Dear All,
Everytime I try to post my billing document which includes rebate, I get "error in account determination" message. Can anybody help me how do I rectify this error. I have checked all the following points:
1. Activated the Rebate at Customer Master Data
2. Activated the Rebate at Sales Organization Level (IMG)
3. Activated the Rebate at BillingLevel (IMG)
4. And finally have created a condition for rebate (VBO1)
Looking forward for your early response.
Best,
Vivek.hi
if u r getting error by using rebate
pls go through this way
pls find the account key for rebate in pricing procedure and pls check in t.code vkoa whether they are assined gl account or not for that particular account key
eg: account keys erl -revenues etc....
Thanks & Regards
phaneendra -
Account Determination Error for Rebate Settlements
I have question on Account Determination for rebates
Here are the entries that I have made in VKOA
ERB - R201051
ERU - R201051 / R120201
ERS - R120201
ERL - R559001
I am able to accrue the money to right accounts, but I am getting an Account Determination error when processing rebate settlements
Any input on this would be really helpful.
Thank you!Hi Shailesh
When you are getting the error in rebate settlements it means you carefully check
all the combinations for VKOA settings. Whether the Account assignment
group in all the Materials used in settlement document along with the customer account assignment group
is maintained or not. Also check in the pricing procedure the account key used.
For all these account key the settings are made in VKOA or not. Hope it will help you
Thanks
sushant -
Rebate Credit Memo Account Determination Error
Dear Experts
I am facing an error in rebate credit memo creation.
Error ' Document 123456 saved (no accounting document generated)
Message no. VF050
This error is appearing only for rebate credit memo creation. I have released billing block in VA02 for credit memo request. Again appearing the same error
G/L's assigned for Rebate account keys & accruals
Against ERB- 506380
ERU- 506381 563081 (accrual)
Normal Credit memos are working fine.
Please advise
Thanks & Regards
Deepu Pillaithanks
-
Hi Experts,
I have configured rebate settings. And till incoiving everything is going smooth. But at the time of saving invoice in VF01, after saving it I am getting this error of account determination. After I go to Environment->Account determination analysis->revenue accounts, and click on the rebate condition type, I found this message - "Accruals condition: The second G/L account is missing". Tell me how to take care of this thing.
Thanks in advance.Hi,
In Tcode VKOA ,you can maintain missing G/L Account.
Take help of FI guy if feel so.
Regards,
Vikas -
hii experts,
Account determination is major concern in SAP.
Whether account determination will be done only SAP MM consultant or any other module responsibilities in account determination?
Becas SAP has more business scenario , each will have account determination ??
So how ..
ThanksBoth FI and MM can do the account determination. FI does the account determination through OMWB and MM does it through OBYC.
Automatic Account Determination
This is perhaps the part that causes the most heartache for the FI Configurer. For some reason, although it is an integration area, the FI team always ends up with responsibility for it. To do a good job you need a reasonable understanding of :
the business processes in the source modules
the FI account postings that they should be generating (what sort of account should be debited or credited etc)
the organisation structure and its relationships between the source modules
the reporting requirements that are expected from the General Ledger or Profit Centre Accounting
your chart of accounts
Sounds daunting doesn't it ? Here is a suggested approach ...
The IMG section under GL / business transactions / integration will take you through all the necessary account determination for the automatic postings that the system may need to post. You may not need all of these.You could maintain on an as needed basis. As the project teams test or prototype their expanding functionality, the SAP system will look for the accounts to which it should post. The error message and the SAP documentation and configuration does not always explain clearly which piece of account determination is used for which type of functionality, so it is sometimes difficult to be pro-active.
Being reactive has the benefit that hopefully each side (eg: MM and FI) can develop an understanding of what the business transaction is and therefore where it should be posting. Otherwise the MM person may not even be aware that he has generated a certain type of posting ! (You'd be amazed at some of the lack of ownership from a logistics consultant for the financial postings that they generate).
I will be explaining each account determination area simply and clearly with posting examples
SD to FI Account Determination (aka revenue account determination). This and MM seem to confuse people the most.
More later - This may take a while to complete........
In the meantime, some general warnings:
Whenever you change the field status settings for an account, ensure that you have verified that any automatic postings will be able to meet the requirements. EG: do not make business area mandatory if your system may make a posting which cannot determine and post the business area.
Consider specifying that accounts that are posted to automatically can only be posted to automatically. This will simplify reconciliation between the source module and the GL account should you need to do this.
SD-FI Account Determination and Postings
This is known in the IMG as "revenue account determination", but it covers a lot more than that (discounts, taxes etc). This is what determines how the financial impact of your SD Billing document is posted into the FI General Ledger.
The integration is controlled both in SD and in FI.
In SD there is a awesome area of configuration called the pricing procedures. The pricing procedure determines the final price quoted to the customer for a particular product. This could be a complicated calculation taking into account the base price, any special prices or discounts that may apply to that scenario, taxes, freight charges etc. These prices or charges are called 'condition types'. This condition technique is used in a number of areas of SAP.
For now all we need to know is that each condition type is assigned to an account key (or in the case of rebates two account keys). You can assign multiple condition types to the same account key. There are a number of account keys that are pre-defined in the system. For example:
ERF freight revenues
ERL revenues
ERS sales deductions
EVV cash settlement
MWS sales tax
Now we start getting to the integration by mapping the account keys to GL accounts. But it is not as simple as that. It can be as flexible (ie: as complex) as you want. Start off with the most simple approach. Generally if one is using a good sales / revenue reporting tool (eg: CO-PA) then one does not need a lot of flexibility and variety in the GL accounts that are posted to. The level of detail that you need in GL should be determined by your financial statement reporting requirements - you may end up with only one Revenue account - it is a good bet!
So, taking the simple approach we would ignore most of the configuration possibilities : procedures, access sequences, condition tables etc (Yes it is that 'condition technique' kicking in again. Once you have worked through it once in one area and encounter it in another then hopefully you will be comfortable in knowing that most of the standard configuration can be left as is. )
We have to decide which access sequences we want to use (Five access sequences are defined in the standard SAP R/3 System). To keep it simple, let us assume we just use one - for example: the access sequence "chart of accounts/sales org./account keys".
The chart of accounts part is standard in all account determinations, so let us look at the rest. This access sequence allows us to specify different GL accounts for different Sales Organisations.
So if we had a billing document line item where the customer had some special deductions for one of the products he purchased, we could map accounts by Sales Organisation. To make it even simpler a document is within one Sales Organisation so we have an overall mapping as follows:
SD Line Item Condition type SD Amount Account Key Sales Organisation GL Account
1 Sales deduction for being such a nice guy $10 ERS 1000 800010 - Sales deductions for 1000
Sales deduction for special promotion on particular product $15 ERS
Base Revenue $200 ERL 800000 - Revenue for Sales Org 1000
Total for item 1 $175
2 Base Revenue $100 ERL 1000 800000 - Revenue for Sales Org 1000
Total for item 2 $ 100
Document Total $ 275
So the invoice that the customer gets (and that you can view in SD) will look something like:
Item (Note this is the SD Invoice line item) Amount
Item 1: $175
Item 2: $100
Total owing , 30 days terms etc: $275
The GL document posting that the system will make to FI will look something like this though:
FI Line Item Debit / Credit Account Amount
1 Debit (PK=01) Customer (AR Account) $ 275
2 Credit (PK=50) Revenue (GL Account) -$ 300
3 Debit (PK=40) Sales Deduction (GL Account) $25
Balancing to 0 as all GL documents must....
$0
Note : There is no direct relation between an SD Line item and an FI Line Item - they are different things.
Other considerations:
Remember that if you are using business areas, then depending on your configuration there, the system may create additional FI line items if it needs to post to different business areas. This may be even more of a reason why you do not need additional GL accounts. If your Sales Organisations already map to different business areas, you could use the GL accounts for all Sales Organisations.
Different access sequences will allow a broader variety of GL accounts (for example: by customer account) group. I strongly suggest having a good understanding of the reporting requirements expected to be supported from the General Ledger vs the SIS (Sales Information System) or CO-PA (Profitability Analysis) or (CO-PCA) Profit Centre modules before you create too many GL accounts. At the risk of repeating myself, the SD to FI account determination should only be as detailed as your statutory reporting requirements. The reporting from other tools like Profitability Analysis are so much more flexible and powerful, you may never look at the General Ledger for internal profit reporting again except to do a reconciliation check. -
How will i configure revenue account determination
how will i configure revenue account determination....
IMG MENUu2014Sales & Distributionu2014Basic Functions-Account assignment/ Costing-Revenue account determination
Check master data relevant for account assignment
Materials: account assignment groups
New entries
Account assignment group Description
K1 Finished Products
K2 Service
K3 Trading products
Save
Customers: account assignment groups
New entries
Account assignment group Description
KA Domestic
KB Export
KC Internal
Save
We use condition technique to set up Account determination
Standard Condition Type KOFI
Access sequence KOFI
Account determination Procedure KOFi00
Standard Tables
001 Customer/material account assign
002 Customer account assignment
003 Material account assignment
004 general
005 Account key
Use the above tables for search that is access sequence
Select define access sequence and account determination type
Maintain access sequences for account determination
Select new entries
Acc seq Description
ZK00 Access seq for account det
Continue
Select ZK00 and select accesses
New entries
Acc table Description
10 1 cust/mat/account key
20 5 account key
Select 10 & 1 Combination. Select fields and activate the fields
Select 20 & 5 combination and select fields and activate fields
Save the access sequence
Fields in tables
Table Fields
1 Sales Org, Cust account assignment grp.mat account assignment grp, account key
5 Sales org, account key
Same menu path
Define account determination type (Condition type)
New entries
Ctyp Name Access sequence
ZK00 Accnt det type Zk00
Save
Define and assignment account determination Procedures
Define account determination Procedure
New entries
Proce Description
ZK0000 Account det Procedure
Continue
Select Zk0000 and select control data
New entries
Step Cntr Condition Type
10 0 ZK00
Save
Assignment account determination Procedure
(Assign the procedure to all the Billing document types)
Position ZKF2
ZKF2 ZK0000
Save
Define and assign account keys
Define account Key
Account key Description
ERL Sales Revenues
ERS Sales deductions
ERF Freight revenue
MWS Taxes on sls/purchase
ERB Rebate sales deductions
ERU Rebate accruals
EVV Cash clearing
Account keys are assigned in the pricing procedure against various condition types
PR00 ERL
K004 ERS
K005 ERS
KF00 ERF
MWST MWS
B001 to B005 ERB ERU
B001 to B005 are Rebate discount condition types
Assign GL accounts
(Here we maintain information in tables, which will be searched by system for selecting GL accounts)
Select table 1
Select details button
App= application, select V for sales
Condition type= Account determination type (ZK00)
Ch= Chart of accounts= INT
(Chart of account is assigned to company code and has the complete list of GL accounts used for business)
SORG= sales org which is involved in revenue generation/ sales unit
Au2026= Customer account assignment Group
AAG. = Material account assignment group
Actky= Account key like ERL etc
GL account No=the GL accountu2013NO maintained in Chart of accounts
Select new entries and maintain the following
Select Table number 5 to maintain GL accounts for tax, Rebates and cash clearing
MWSu2014175000
ERBu2014884000
ERU 884010 89000
EVV 10000
Create Order; Delivery, PGI and then billing document, when the Billing document is saved account determination should happen
hope this will help u
Regards
nitin -
MM subcontracting Account determination
Hi All,
Any one knows MM subcontracting Account determination in OBYC?
any help is appreciated..
Thanks,
RauHi,
Hi,
For Account Determination 5 major characteru2019s are as follow:
1.Chart of Account,
2.Valuation Class,
3.Transaction Event Key,
4.Valuation Grouping Code,
5.Account Grouping Code/Account Modifier.
Configuration of Automatic Account Determination with T.Code are as follow:
1.OMSK: valuation Class with Account category reference,
2.OMWM: Active Valuation Grouping Code,
3.OMWN: Active Movement type with G/L account,
4.OMWD: Active Valuation Area,
5.OMWB: Active Chart of account,Valuation Grouping Code,Account Grouping Code,Valuation Class and G/L acocounts
In OMWB or OBYC
Click TE key and enter Chart of account and then save the Roles 1st for
1.Debit/Credit
2.General modification
3.Valuation Modif
4.Vakuation class
And then enter respective critetia for that TE key and save.
If assignment(Chart of account,Valuation Grouping Code,Account Grouping Code,Valuation Class and G/L acocounts
are correct and u would not face any problems in G/GI/IV.
The TE keys are:
Expense/revenue from consumption of consignment material (AKO)
This transaction is used in Inventory Management in the case of
withdrawals from consignment stock or when consignment stock is
transferred to own stock if the material is subject to standard
price control and the consignment price differs from the standard
price.
u2022 Expenditure/income from transfer posting (AUM)
This transaction is used for transfer postings from one material to
another if the complete value of the issuing material cannot be
posted to the value of the receiving material. This applies both to
materials with standard price control and to materials with moving
average price control. Price differences can arise for materials
with moving average price if stock levels are negative and the stock
value becomes unrealistic as a result of the posting. Transaction
AUM can be used irrespective of whether the transfer posting
involves a transfer between plants. The expenditure/income is added
to the receiving material.
u2022 Provisions for subsequent (end-of-period rebate) settlement (BO1)
If you use the "subsequent settlement" function with regard to
conditions (e.g. for period-end volume-based rebates), provisions
for accrued income are set up when goods receipts are recorded
against purchase orders if this is defined for the condition type.
u2022 Income from subsequent settlement (BO2)
The rebate income generated in the course of "subsequent settlement"
(end-of-period rebate settlement) is posted via this transaction.
u2022 Income from subsequent settlement after actual settlement (BO3)
If a goods receipt occurs after settlement accounting has been
effected for a rebate arrangement, no further provisions for accrued
rebate income can be managed by the "subsequent settlement"
facility. No postings should be made to the account normally used
for such provisions. As an alternative, you can use this transaction
to post provisions for accrued rebate income to a separate account
in cases such as the one described.
u2022 Change in stock (BSV)
Changes in stocks are posted in Inventory Management at the time
goods receipts are recorded or subsequent adjustments made with
regard to subcontract orders.
If the account assigned here is defined as a cost element, you must
specify a preliminary account assignment for the account in the
table of automatic account assignment specification (Customizing for
Controlling) in order to be able to post goods receipts against
subcontract orders. In the standard system, cost center SC-1 is
defined for this purpose.
Stock posting (BSX)
This transaction is used for all postings to stock accounts. Such
postings are effected, for example:
In inventory management in the case of goods receipts to own
stock and goods issues from own stock
In invoice verification, if price differences occur in
connection with incoming invoices for materials valuated at
moving average price and there is adequate stock coverage
In order settlement, if the order is assigned to a material with
moving average price and the actual costs at the time of
settlement vary from the actual costs at the time of goods
receipt
Because this transaction is dependent on the valuation class, it is
possible to manage materials with different valuation classes in
separate stock accounts.
Caution :
Take care to ensure that:
A stock account is not used for any transaction other than BSX
Postings are not made to the account manually
The account is not changed in the productive system before all
stock has been booked out of it
Otherwise differences would arise between the total stock value of
the material master records and the balance on the stock account.
Revaluation of "other" consumptions (COC)
This transaction/event key is only relevant to Brazil. It is used if
a revaluation report is used for company codes in Brazil.
The revaluation report uses the actual prices determined by the
material ledger/actual costing to:
Revaluate costs on the basis of actual prices
Post the price differences arising from "other" consumptions
(e.g. consumption to cost center) to a collective account
This transaction/event key is needed to post the price differences.
The account specified here is posted with the price differences for
"other" consumptions.
o documentation currently available.
Small differences, Materials Management (DIF)
This transaction is used in Invoice Verification if you define a
tolerance for minor differences and the balance of an invoice does
not exceed the tolerance.
Purchase account(EIN), purchase offsetting account (EKG), freight
purchase account (FRE)
These transactions are used only if Purchase Account Management is
active in the company code.
Freight clearing (FR1), provision for freight charges (FR2), customs
duty clearing (FR3), provision for customs duty (FR4)
These transactions are used to post delivery costs (incidental
procurement costs) in the case of goods receipts against purchase
orders and incoming invoices. Which transaction is used for which
delivery costs depends on the condition types defined in the
purchase order.
You can also enter your own transactions for delivery costs in
condition types.
External service (FRL)
The transaction is used for goods and invoice receipts in connection
with subcontract orders.
If the account assigned here is defined as a cost element, you must
specify a preliminary account assignment for the account in the
table of automatic account assignment specification (Customizing for
Controlling) in order to be able to post goods receipts against
subcontract orders. In the standard system, cost center SC-1 is
defined for this purpose.
External service, delivery costs (FRN)
This transaction is used for delivery costs (incidental costs of
procurement) in connection with subcontract orders.
If the account assigned here is defined as a cost element, you must
Offsetting entry for stock posting (GBB)
Offsetting entries for stock postings are used in Inventory
Management. They are dependent on the account grouping to which each
movement type is assigned. The following account groupings are
defined in the standard system:
AUA: for order settlement
AUF: for goods receipts for orders (without account
assignment)
and for order settlement if AUA is not maintained
AUI: Subsequent adjustment of actual price from cost center
directly
to material (with account assignment)
BSA: for initial entry of stock balances
INV: for expenditure/income from inventory differences
VAX: for goods issues for sales orders without
account assignment object (the account is not a cost
element)
VAY: for goods issues for sales orders with
account assignment object (account is a cost element)
VBO: for consumption from stock of material provided to
vendor
VBR: for internal goods issues (for example, for cost
center)
VKA: for sales order account assignment
(for example, for individual purchase order)
VKP: for project account assignment (for example, for
individual PO)
VNG: for scrapping/destruction
VQP: for sample withdrawals without account assignment
VQY: for sample withdrawals with account assignment
ZOB: for goods receipts without purchase orders (mvt type
501)
ZOF: for goods receipts without production orders
(mvt types 521 and 531)
You can also define your own account groupings. If you intend to
post goods issues for cost centers (mvt type 201) and goods issues
for orders (mvt type 261) to separate consumption accounts, you can
assign the account grouping ZZZ to movement type 201 and account
grouping YYY to movement type 261.
Caution
If you use goods receipts without a purchase order in your system
(movement type 501), you have to check to which accounts the account
groupings are assigned ZOB
If you expect invoices for the goods receipts, and these invoices
can only be posted in Accounting, you can enter a clearing account
(similar to a GR/IR clearing account though without open item
management), which is cleared in Accounting when you post the vendor
invoice.
Note that the goods movement is valuated with the valuation price of
the material if no external amount has been entered.
As no account assignment has been entered in the standard system,
the assigned account is not defined as a cost element. If you assign
a cost element, you have to enter an account assignment via the
field selection or maintain an automatic account assignment for the
cost element.
Purchase order with account assignment (KBS)
You cannot assign this transaction/event key to an account. It means
that the account assignment is adopted from the purchase order and
is used for the purpose of determining the posting keys for the
goods receipt.
Exchange rate differences in the case of open items (KDM)
Exchange rate differences in the case of open items arise when an
invoice relating to a purchase order is posted with a different
exchange rate to that of the goods receipt and the material cannot
be debited or credited due to standard price control or stock
undercoverage/shortage.
Differences due to exchange rate rounding, Materials Management
(KDR)
An exchange rate rounding difference can arise in the case of an
invoice made out in a foreign currency. If a difference arises when
the posting lines are translated into local currency (as a result of
rounding), the system automatically generates a posting line for
this rounding difference.
Consignment liabilities (KON)
Consignment liabilities arise in the case of withdrawals from
consignment stock or from a pipeline or when consignment stock is
transferred to own stock.
Depending on the settings for the posting rules for the
transaction/event key KON, it is possible to work with or without
account modification. If you work with account modification, the
following modifications are available in the standard system:
None for consignment liabilities
PIP for pipeline liabilities
Offsetting entry for price differences in cost object hierarchies
(KTR)
The contra entry for price difference postings (transaction PRK)
arising through settlement via material account determination is
carried out with transaction KTR.
Price differences (PRD)
Price differences arise for materials valuated at standard price in
the case of all movements and invoices with a value that differs
from the standard price. Examples: goods receipts against purchase
orders (if the PO price differs from the standard pricedardpreis),
goods issues in respect of which an external amount is entered,
invoices (if the invoice price differs from the PO price and the
standard price).
Price differences can also arise in the case of materials with
moving average price if there is not enough stock to cover the
invoiced quantity. In the case of goods movements in the negative
range, the moving average price is not changed. Instead, any price
differences arising are posted to a price difference account.
Depending on the settings for the posting rules for
transaction/event key PRD, it is possible to work with or without
account modification. If you use account modification, the following
modifications are available in the standard system:
None for goods and invoice receipts against purchase orders
PRF for goods receipts against production orders and
order settlement
PRA for goods issues and other movements
PRU for transfer postings (price differences in the case
of external amounts)
Provision for delivery costs (RUE)
Provisions are created for accrued delivery costs if a condition
type for provisions is entered in the purchase order. They must be
cleared manually at the time of invoice verification.
Taxes in case of transfer posting GI/GR (TXO)
This transaction/event key is only relevant to Brazil (nota fiscal).
Revenue/expense from revaluation (UMB)
This transaction/event key is used both in Inventory Management and
in Invoice Verification if the standard price of a material has been
changed and a movement or an invoice is posted to the previous
period (at the previous price).
Unplanned delivery costs (UPF)
Unplanned delivery costs are delivery costs (incidental procurement
costs) that were not planned in a purchase order (e.g. freight,
customs duty). In the SAP posting transaction in Logistics Invoice
Verification, instead of distributing these unplanned delivery costs
among all invoice items as hitherto, you have the option of posting
them to a special account. A separate tax code can be used for this
account.
Input tax, Purchasing (VST)
Transaction/event key for tax account determination within the
"subsequent settlement" facility for debit-side settlement types.
The key is needed in the settlement schema for tax conditions.
Goods issue, revaluation (inflation) (WGI)
This transaction/event key is used if already-posted goods issues
have to be revaluated following the determination of a new market
price within the framework of inflation handling.
Goods receipt, revaluation (inflation) (WGR)
This transaction/event key is used if already-effected transfer
postings have to be revaluated following the determination of a new
market price within the framework of inflation handling. This
transaction is used for the receiving plant, whereas transaction WGI
(goods receipt, revaluation (inflation)) is used for the plant at
which the goods are issued.
GR/IR clearing (WRX)
Postings to the GR/IR clearing account occur in the case of goods
and invoice receipts against purchase orders. For more on the GR/IR
clearing account, refer to the SAP Library (documentation MM
Material Valuation).
Caution
You must set the Balances in local currency only indicator for the
GR/IR clearing account to enable the open items to be cleared. For
more on this topic, see the field documentation.
Thanks,
Raja -
Hi,
Can anybody explain total how many G/l Accounts, we will generally assign and please give the list including TE Key.. The reply will be highly appreciated...Hi,
For Account Determination 5 major characteru2019s are as follow:
1.Chart of Account,
2.Valuation Class,
3.Transaction Event Key,
4.Valuation Grouping Code,
5.Account Grouping Code/Account Modifier.
Configuration of Automatic Account Determination with T.Code are as follow:
1.OMSK: valuation Class with Account category reference,
2.OMWM: Active Valuation Grouping Code,
3.OMWN: Active Movement type with G/L account,
4.OMWD: Active Valuation Area,
5.OMWB: Active Chart of account,Valuation Grouping Code,Account Grouping Code,Valuation Class and G/L acocounts
In OMWB or OBYC
Click TE key and enter Chart of account and then save the Roles 1st for
1.Debit/Credit
2.General modification
3.Valuation Modif
4.Vakuation class
And then enter respective critetia for that TE key and save.
If assignment(Chart of account,Valuation Grouping Code,Account Grouping Code,Valuation Class and G/L acocounts
are correct and u would not face any problems in G/GI/IV.
The TE keys are:
Expense/revenue from consumption of consignment material (AKO)
This transaction is used in Inventory Management in the case of
withdrawals from consignment stock or when consignment stock is
transferred to own stock if the material is subject to standard
price control and the consignment price differs from the standard
price.
u2022 Expenditure/income from transfer posting (AUM)
This transaction is used for transfer postings from one material to
another if the complete value of the issuing material cannot be
posted to the value of the receiving material. This applies both to
materials with standard price control and to materials with moving
average price control. Price differences can arise for materials
with moving average price if stock levels are negative and the stock
value becomes unrealistic as a result of the posting. Transaction
AUM can be used irrespective of whether the transfer posting
involves a transfer between plants. The expenditure/income is added
to the receiving material.
u2022 Provisions for subsequent (end-of-period rebate) settlement (BO1)
If you use the "subsequent settlement" function with regard to
conditions (e.g. for period-end volume-based rebates), provisions
for accrued income are set up when goods receipts are recorded
against purchase orders if this is defined for the condition type.
u2022 Income from subsequent settlement (BO2)
The rebate income generated in the course of "subsequent settlement"
(end-of-period rebate settlement) is posted via this transaction.
u2022 Income from subsequent settlement after actual settlement (BO3)
If a goods receipt occurs after settlement accounting has been
effected for a rebate arrangement, no further provisions for accrued
rebate income can be managed by the "subsequent settlement"
facility. No postings should be made to the account normally used
for such provisions. As an alternative, you can use this transaction
to post provisions for accrued rebate income to a separate account
in cases such as the one described.
u2022 Change in stock (BSV)
Changes in stocks are posted in Inventory Management at the time
goods receipts are recorded or subsequent adjustments made with
regard to subcontract orders.
If the account assigned here is defined as a cost element, you must
specify a preliminary account assignment for the account in the
table of automatic account assignment specification (Customizing for
Controlling) in order to be able to post goods receipts against
subcontract orders. In the standard system, cost center SC-1 is
defined for this purpose.
Stock posting (BSX)
This transaction is used for all postings to stock accounts. Such
postings are effected, for example:
- In inventory management in the case of goods receipts to own
stock and goods issues from own stock
- In invoice verification, if price differences occur in
connection with incoming invoices for materials valuated at
moving average price and there is adequate stock coverage
- In order settlement, if the order is assigned to a material with
moving average price and the actual costs at the time of
settlement vary from the actual costs at the time of goods
receipt
Because this transaction is dependent on the valuation class, it is
possible to manage materials with different valuation classes in
separate stock accounts.
Caution :
Take care to ensure that:
- A stock account is not used for any transaction other than BSX
- Postings are not made to the account manually
- The account is not changed in the productive system before all
stock has been booked out of it
Otherwise differences would arise between the total stock value of
the material master records and the balance on the stock account.
Revaluation of "other" consumptions (COC)
This transaction/event key is only relevant to Brazil. It is used if
a revaluation report is used for company codes in Brazil.
The revaluation report uses the actual prices determined by the
material ledger/actual costing to:
- Revaluate costs on the basis of actual prices
- Post the price differences arising from "other" consumptions
(e.g. consumption to cost center) to a collective account
This transaction/event key is needed to post the price differences.
The account specified here is posted with the price differences for
"other" consumptions.
o documentation currently available.
Small differences, Materials Management (DIF)
This transaction is used in Invoice Verification if you define a
tolerance for minor differences and the balance of an invoice does
not exceed the tolerance.
Purchase account(EIN), purchase offsetting account (EKG), freight
purchase account (FRE)
These transactions are used only if Purchase Account Management is
active in the company code.
Freight clearing (FR1), provision for freight charges (FR2), customs
duty clearing (FR3), provision for customs duty (FR4)
These transactions are used to post delivery costs (incidental
procurement costs) in the case of goods receipts against purchase
orders and incoming invoices. Which transaction is used for which
delivery costs depends on the condition types defined in the
purchase order.
You can also enter your own transactions for delivery costs in
condition types.
External service (FRL)
The transaction is used for goods and invoice receipts in connection
with subcontract orders.
If the account assigned here is defined as a cost element, you must
specify a preliminary account assignment for the account in the
table of automatic account assignment specification (Customizing for
Controlling) in order to be able to post goods receipts against
subcontract orders. In the standard system, cost center SC-1 is
defined for this purpose.
External service, delivery costs (FRN)
This transaction is used for delivery costs (incidental costs of
procurement) in connection with subcontract orders.
If the account assigned here is defined as a cost element, you must
Offsetting entry for stock posting (GBB)
Offsetting entries for stock postings are used in Inventory
Management. They are dependent on the account grouping to which each
movement type is assigned. The following account groupings are
defined in the standard system:
- AUA: for order settlement
- AUF: for goods receipts for orders (without account
assignment)
and for order settlement if AUA is not maintained
- AUI: Subsequent adjustment of actual price from cost center
directly
to material (with account assignment)
- BSA: for initial entry of stock balances
- INV: for expenditure/income from inventory differences
- VAX: for goods issues for sales orders without
account assignment object (the account is not a cost
element)
- VAY: for goods issues for sales orders with
account assignment object (account is a cost element)
- VBO: for consumption from stock of material provided to
vendor
- VBR: for internal goods issues (for example, for cost
center)
- VKA: for sales order account assignment
(for example, for individual purchase order)
- VKP: for project account assignment (for example, for
individual PO)
- VNG: for scrapping/destruction
- VQP: for sample withdrawals without account assignment
- VQY: for sample withdrawals with account assignment
- ZOB: for goods receipts without purchase orders (mvt type
501)
- ZOF: for goods receipts without production orders
(mvt types 521 and 531)
You can also define your own account groupings. If you intend to
post goods issues for cost centers (mvt type 201) and goods issues
for orders (mvt type 261) to separate consumption accounts, you can
assign the account grouping ZZZ to movement type 201 and account
grouping YYY to movement type 261.
Caution
If you use goods receipts without a purchase order in your system
(movement type 501), you have to check to which accounts the account
groupings are assigned ZOB
If you expect invoices for the goods receipts, and these invoices
can only be posted in Accounting, you can enter a clearing account
(similar to a GR/IR clearing account though without open item
management), which is cleared in Accounting when you post the vendor
invoice.
Note that the goods movement is valuated with the valuation price of
the material if no external amount has been entered.
As no account assignment has been entered in the standard system,
the assigned account is not defined as a cost element. If you assign
a cost element, you have to enter an account assignment via the
field selection or maintain an automatic account assignment for the
cost element.
Purchase order with account assignment (KBS)
You cannot assign this transaction/event key to an account. It means
that the account assignment is adopted from the purchase order and
is used for the purpose of determining the posting keys for the
goods receipt.
Exchange rate differences in the case of open items (KDM)
Exchange rate differences in the case of open items arise when an
invoice relating to a purchase order is posted with a different
exchange rate to that of the goods receipt and the material cannot
be debited or credited due to standard price control or stock
undercoverage/shortage.
Differences due to exchange rate rounding, Materials Management
(KDR)
An exchange rate rounding difference can arise in the case of an
invoice made out in a foreign currency. If a difference arises when
the posting lines are translated into local currency (as a result of
rounding), the system automatically generates a posting line for
this rounding difference.
Consignment liabilities (KON)
Consignment liabilities arise in the case of withdrawals from
consignment stock or from a pipeline or when consignment stock is
transferred to own stock.
Depending on the settings for the posting rules for the
transaction/event key KON, it is possible to work with or without
account modification. If you work with account modification, the
following modifications are available in the standard system:
- None for consignment liabilities
- PIP for pipeline liabilities
Offsetting entry for price differences in cost object hierarchies
(KTR)
The contra entry for price difference postings (transaction PRK)
arising through settlement via material account determination is
carried out with transaction KTR.
Price differences (PRD)
Price differences arise for materials valuated at standard price in
the case of all movements and invoices with a value that differs
from the standard price. Examples: goods receipts against purchase
orders (if the PO price differs from the standard pricedardpreis),
goods issues in respect of which an external amount is entered,
invoices (if the invoice price differs from the PO price and the
standard price).
Price differences can also arise in the case of materials with
moving average price if there is not enough stock to cover the
invoiced quantity. In the case of goods movements in the negative
range, the moving average price is not changed. Instead, any price
differences arising are posted to a price difference account.
Depending on the settings for the posting rules for
transaction/event key PRD, it is possible to work with or without
account modification. If you use account modification, the following
modifications are available in the standard system:
- None for goods and invoice receipts against purchase orders
- PRF for goods receipts against production orders and
order settlement
- PRA for goods issues and other movements
- PRU for transfer postings (price differences in the case
of external amounts)
Provision for delivery costs (RUE)
Provisions are created for accrued delivery costs if a condition
type for provisions is entered in the purchase order. They must be
cleared manually at the time of invoice verification.
Taxes in case of transfer posting GI/GR (TXO)
This transaction/event key is only relevant to Brazil (nota fiscal).
Revenue/expense from revaluation (UMB)
This transaction/event key is used both in Inventory Management and
in Invoice Verification if the standard price of a material has been
changed and a movement or an invoice is posted to the previous
period (at the previous price).
Unplanned delivery costs (UPF)
Unplanned delivery costs are delivery costs (incidental procurement
costs) that were not planned in a purchase order (e.g. freight,
customs duty). In the SAP posting transaction in Logistics Invoice
Verification, instead of distributing these unplanned delivery costs
among all invoice items as hitherto, you have the option of posting
them to a special account. A separate tax code can be used for this
account.
Input tax, Purchasing (VST)
Transaction/event key for tax account determination within the
"subsequent settlement" facility for debit-side settlement types.
The key is needed in the settlement schema for tax conditions.
Goods issue, revaluation (inflation) (WGI)
This transaction/event key is used if already-posted goods issues
have to be revaluated following the determination of a new market
price within the framework of inflation handling.
Goods receipt, revaluation (inflation) (WGR)
This transaction/event key is used if already-effected transfer
postings have to be revaluated following the determination of a new
market price within the framework of inflation handling. This
transaction is used for the receiving plant, whereas transaction WGI
(goods receipt, revaluation (inflation)) is used for the plant at
which the goods are issued.
GR/IR clearing (WRX)
Postings to the GR/IR clearing account occur in the case of goods
and invoice receipts against purchase orders. For more on the GR/IR
clearing account, refer to the SAP Library (documentation MM
Material Valuation).
Caution
You must set the Balances in local currency only indicator for the
GR/IR clearing account to enable the open items to be cleared. For
more on this topic, see the field documentation.
Regards,
Biju K -
Business transaction key in account determination..?
Hi all
Can anybody explain me in simple form form, what is business transaction key in account determination , for eg, GBB,BSA,BSX,PRD,VBR,.WRX....etc (Approximately 60 transaction keys in std SAP)
If i want to do configuration the for new client, what are all the business transaction key,,, How the configuration wil happen..?
Pls giv me expaination,
Reply will be rewardable..
Thanks
sap-mmHi MM,
Please Search in SDN threads solution is given already in lot of threads.
Go to SAP Library
SPRO> Help> SAP Library
Or go to SPRO> IMG> MM>Valuation and Account Assignment>Account determination> Account det without wizard> configure Automatic postings
Click on IMG ACTIVITY DOCUMENTATION
These transactions are important for Accounts.
Postings are made to G/L accounts automatically in the case of Invoice Verification and Inventory Management transactions relevant to Financial and Cost Accounting.
Example:
Posting lines are created in the following accounts in the case of a goods issue for a cost center:
Stock account
Consumption account
Agency business: income (AG1)
This transaction can be used in agency business for income deriving from commission (e.g. del credere commission). The account key is used in the calculation schemas for agency business to determine the associated revenue accounts.
Agency business: turnover (AG2)
This transaction can be used in agency business if turnover (business volume) postings are activated in Customizing for the payment types. The account key is specified in Customizing for the billing type.
Agency business: expense (AG3)
This transaction can be used in agency business for commission expenses. The account key is used in the calculation schemas for agency business to determine the associated expense accounts.
Expense/revenue from consumption of consignment material (AKO)
This transaction is used in Inventory Management in the case of withdrawals from consignment stock or when consignment stock is transferred to own stock if the material is subject to standard price control and the consignment price differs from the standard price.
Expenditure/income from transfer posting (AUM)
This transaction is used for transfer postings from one material to another if the complete value of the issuing material cannot be posted to the value of the receiving material. This applies both to materials with standard price control and to materials with moving average price control. Price differences can arise for materials with moving average price if stock levels are negative and the stock value becomes unrealistic as a result of the posting. Transaction AUM can be used irrespective of whether the transfer posting involves a transfer between plants. The expenditure/income is added to the receiving material.
Provisions for subsequent (end-of-period rebate) settlement (BO1)
If you use the "subsequent settlement" function with regard to conditions (e.g. for period-end volume-based rebates), provisions for accrued income are set up when goods receipts are recorded against purchase orders if this is defined for the condition type.
Income from subsequent settlement (BO2)
The rebate income generated in the course of "subsequent settlement" (end-of-period rebate settlement) is posted via this transaction.
Income from subsequent settlement after actual settlement (BO3)
If a goods receipt occurs after settlement accounting has been effected for a rebate arrangement, no further provisions for accrued rebate income can be managed by the "subsequent settlement" facility. No postings should be made to the account normally used for such provisions. As an alternative, you can use this transaction to post provisions for accrued rebate income to a separate account in cases such as the one described.
Supplementary entry for stock (BSD)
This account is posted when closing entries are made for a cumulation run. This account is a supplementary account to the stock account; that is, the stock account is added to it to determine the stock value that was calculated via the cumulation. In the process, the various valuation areas (for example, commercial, tax), that are used in the balance sheet are taxed separately.
Change in stock (BSV)
Changes in stocks are posted in Inventory Management at the time goods receipts are recorded or subsequent adjustments made with regard to subcontract orders.
If the account assigned here is defined as a cost element, you must specify a preliminary account assignment for the account in the table of automatic account assignment specification (Customizing for Controlling) in order to be able to post goods receipts against subcontract orders. In the standard system, cost center SC-1 is defined for this purpose.
Stock posting (BSX)
This transaction is used for all postings to stock accounts. Such postings are effected, for example:
In inventory management in the case of goods receipts to own stock and goods issues from own stock
In invoice verification, if price differences occur in connection with incoming invoices for materials valuated at moving average price and there is adequate stock coverage
In order settlement, if the order is assigned to a material with moving average price and the actual costs at the time of settlement vary from the actual costs at the time of goods receipt
Because this transaction is dependent on the valuation class, it is possible to manage materials with different valuation classes in separate stock accounts.
Revaluation of other consumption (COC)
This transaction/event key is required for the revaluation of consumption in Actual Costing/Material Ledger.
Revaluation of consumption valuates single-level consumption using the actual prices determined in the Actual Costing/Material Ledger application. This revaluation can either take place in the account where the original postings were made, or in a header account.
The header account is determined using the transaction/event key COC.
Del credere (DEL)
Transaction/event key for the payment/invoice list documents in Purchasing. The account key is needed in the calculation schema for payment/settlement processing to determine the associated revenue accounts.
Small differences, Materials Management (DIF)
This transaction is used in Invoice Verification if you define a tolerance for minor differences and the balance of an invoice does not exceed the tolerance.
Purchase account(EIN), purchase offsetting account (EKG), freight purchase account (FRE)
These transactions are used only if Purchase Account Management is active in the company code.
Note
Due to special legal requirements, this function was developed specially for certain countries (Belgium, Spain, Portugal, France, Italy, and Finland).
Before you use this function, check whether you need to use it in your country.
Freight clearing (FR1), provision for freight charges (FR2), customs duty clearing (FR3), provision for customs duty (FR4)
These transactions are used to post delivery costs (incidental procurement costs) in the case of goods receipts against purchase orders and incoming invoices. Which transaction is used for which delivery costs depends on the condition types defined in the purchase order.
You can also enter your own transactions for delivery costs in condition types.
External service (FRL)
The transaction is used for goods and invoice receipts in connection with subcontract orders.
If the account assigned here is defined as a cost element, you must specify a preliminary account assignment for the account in the table of automatic account assignment specification (Customizing for Controlling) in order to be able to post goods receipts against subcontract orders. In the standard system, cost center SC-1 is defined for this purpose.
External service, delivery costs (FRN)
This transaction is used for delivery costs (incidental costs of procurement) in connection with subcontract orders.
If the account assigned here is defined as a cost element, you must specify a preliminary account assignment for the account in the table of automatic account assignment specification (Customizing for Controlling) in order to be able to post goods receipts against subcontract orders. In the standard system, cost center SC-1 is defined for this purpose.
Offsetting entry for stock posting (GBB)
Offsetting entries for stock postings are used in Inventory Management. They are dependent on the account grouping to which each movement type is assigned. The following account groupings are defined in the standard system:
Purchase order with account assignment (KBS)
You cannot assign this transaction/event key to an account. It means that the account assignment is adopted from the purchase order and is used for the purpose of determining the posting keys for the goods receipt.
Exchange Rate Differences Materials Management(AVR) (KDG)
When you carry out a revaluation of single-level consumption in the material ledger for an alternative valuation run, the exchange rate difference accounts of the materials are credited with the exchange rate differences that are to be assigned to the consumption.
Exchange rate differences in the case of open items (KDM)
Exchange rate differences in the case of open items arise when an invoice relating to a purchase order is posted with a different exchange rate to that of the goods receipt and the material cannot be debited or credited due to standard price control or stock undercoverage/shortage.
Differences due to exchange rate rounding, Materials Management (KDR)
An exchange rate rounding difference can arise in the case of an invoice made out in a foreign currency. If a difference arises when the posting lines are translated into local currency (as a result of rounding), the system automatically generates a posting line for this rounding difference.
Exchange Rate Differences from Lower Levels (KDV)
In multi-level periodic settlement in the material ledger, some of the exchange rate differences that have been posted during the period in respect of the raw materials, semifinished products and cost centers performing the activity used in the manufacture of a semifinished or finished product are debited or credited to that semifinished or finished product.
Consignment liabilities (KON)
Consignment liabilities arise in the case of withdrawals from consignment stock or from a pipeline or when consignment stock is transferred to own stock.
Depending on the settings for the posting rules for the transaction/event key KON, it is possible to work with or without account modification. If you work with account modification, the following modifications are available in the standard system:
None for consignment liabilities
PIP for pipeline liabilities
Offsetting entry for price differences in cost object hierarchies (KTR)
The contra entry for price difference postings (transaction PRK) arising through settlement via material account determination is carried out with transaction KTR.
Accruals and deferrals account (material ledger) (LKW)
If the process of material price determination in the material ledger is not accompanied by revaluation of closing stock, the price and exchange rate differences that should actually be applied to the stock value are contra-posted to accounts with the transaction/event key LKW.
If, on the other hand, price determination in the material ledger is accompanied by revaluation of the closing stock, the price and exchange rate differences are posted to the stock account (i.e. the stock is revalued).
Price Difference from Exploded WIP (Lar.) (PRA)
If you use the WIP revaluation of the material ledger, the price variances of the exploded WIP stock of an activity type or a business process are posted to the price differences account with transaction/event key PRA.
Differences (AVR Price) (PRC)
In the alternative valuation run in the material ledger, some of the variances that accrue interest in the cost centers, are transfer posted to the semifinished or finished product.
Price differences (PRD)
Price differences arise for materials valuated at standard price in the case of all movements and invoices with a value that differs from the standard price. Examples: goods receipts against purchase orders (if the PO price differs from the standard pricedardpreis), goods issues in respect of which an external amount is entered, invoices (if the invoice price differs from the PO price and the standard price).
Price differences can also arise in the case of materials with moving average price if there is not enough stock to cover the invoiced quantity. In the case of goods movements in the negative range, the moving average price is not changed. Instead, any price differences arising are posted to a price difference account.
Depending on the settings for the posting rules for transaction/event key PRD, it is possible to work with or without account modification. If you use account modification, the following modifications are available in the standard system:
None for goods and invoice receipts against purchase orders
PRF for goods receipts against production orders and
order settlement
PRA for goods issues and other movements
PRU for transfer postings (price differences in the case
of external amounts)
Price Differences (Material Ledger, AVR) (PRG)
When you carry out a revaluation of single-level consumption in the material ledger during the alternative valuation run, the price difference accounts of the materials are credited with the price differences that are to be assigned to the consumption.
Price differences in cost object hierarchies (PRK)
In cost object hierarchies, price differences occur both for the assigned materials with standard price and for the accounts of the cost object hierarchy. In the course of settlement for cost object hierarchies after settlement via material account determination, the price differences are posted via the transaction PRK.
Price Difference from Exploded WIP (Mat.) (PRM)
If you use the WIP revaluation of the material ledger, the price and exchange rate differences of the exploded WIP stock of a material are posted to the price difference account with transaction/event key PRM.
Price differences, product cost collector (PRP)
During settlement accounting with regard to a product cost collector in repetitive manufacturing, price differences are posted with the transaction PRP in the case of the valuated sales order stock.
This transaction is currently used in the following instances only:
Production cost collector in Release 4.0
Product cost collector in IS Automotive Release 2.0 (product cost collector in connection with APO)
Offsetting entry: price differences, product cost collector (PRQ)
The offsetting (contra) entry to price difference postings (transaction PRP) in the course of settlement accounting with respect to a product cost collector in repetitive manufacturing in the case of the valuated sales order stock is carried out via transaction PRQ.
This transaction is currently used in the following instances only:
Production cost collector in Release 4.0
Product cost collector in IS Automotive Release 2.0 (product cost collector in connection with APO)
Price Differences from Lower Levels (PRV)
In multi-level periodic settlement in the material ledger, some of the price differences posted during the period in respect of the raw materials, semifinished products, and cost centers performing the activity used in a semifinished or finished product, are transfer posted to that semifinished or finished product.
Price differences for material ledger (PRY)
In the course of settlement in the material ledger, price differences from the material ledger are posted with the transaction PRY.
Expense and revenue from revaluation (retroactive pricing, RAP)
This transaction/event key is used in Invoice Verification within the framework of the revaluation of goods and services supplied for which settlement has already taken place. Any difference amounts determined are posted to the accounts assigned to the transaction/event key RAP (retroactive pricing) as expense or revenue.
At the time of the revaluation, the amounts determined or portions thereof) are posted neither to material stock accounts nor to price difference accounts. The full amount is always posted to the "Expense from Revaluation" or "Revenue from Revaluation" account. The offsetting (contra) entry is made to the relevant vendor account.
Invoice reductions in Logistics Invoice Verification (RKA)
This transaction/event key is used in Logistics Invoice Verification for the interim posting of price differences in the case of invoice reductions.
If a vendor invoice is reduced, two accounting documents are automatically created for the invoice document. With the first accounting document, the amount invoiced is posted in the vendor line. An additional line is generated on the invoice reduction account to partially offset this amount. With the second accounting document, the invoice reduction is posted in the form of a credit memo from the vendor. The offsetting entry to the vendor line is the invoice reduction account. Hence the invoice reduction account is always balanced off by two accounting documents within one transaction.
Provision for delivery costs (RUE)
Provisions are created for accrued delivery costs if a condition type for provisions is entered in the purchase order. They must be cleared manually at the time of invoice verification.
Taxes in case of transfer posting GI/GR (TXO)
This transaction/event key is only relevant to Brazil (nota fiscal).
Revenue/expense from revaluation (UMB)
This transaction/event key is used both in Inventory Management and in Invoice Verification if the standard price of a material has been changed and a movement or an invoice is posted to the previous period (at the previous price).
Expenditure/income from revaluation (UMD)
This account is the offsetting account for the BSD account. It is posted during the closing entries for the cumulation run of the material ledger and has to be defined for the same valuation areas.
Unplanned delivery costs (UPF)
Unplanned delivery costs are delivery costs (incidental procurement costs) that were not planned in a purchase order (e.g. freight, customs duty). In the SAP posting transaction in Logistics Invoice Verification, instead of distributing these unplanned delivery costs among all invoice items as hitherto, you have the option of posting them to a special account. A separate tax code can be used for this account.
Input tax, Purchasing (VST)
Transaction/event key for tax account determination within the "subsequent settlement" facility for debit-side settlement types. The key is needed in the settlement schema for tax conditions.
Inflation posting (WGB)
Transaction/event key that posts inflation postings to a different account, within the handling of inflation process for the period-end closing.
Goods issue, revaluation (inflation) (WGI)
This transaction/event key is used if already-posted goods issues have to be revaluated following the determination of a new market price within the framework of inflation handling.
Goods receipt, revaluation (inflation) (WGR)
This transaction/event key is used if already-effected transfer postings have to be revaluated following the determination of a new market price within the framework of inflation handling. This transaction is used for the receiving plant, whereas transaction WGI (goods receipt, revaluation (inflation)) is used for the plant at which the goods are issued.
WIP from Price Differences (Internal Activity) (WPA)
When you use the WIP revaluation of the material ledger, the price variances from the actual price calculation that are to be assigned to the WIP stock, an activity type or a business process are posted to the WIP account for activities.
WIP from Price Differences (Material) (WPM)
When you use the WIP revaluation of the material ledger, the price and exchange rate differences that are to be assigned to the WIP stock of a material are posted to the WIP account for material.
GR/IR clearing (WRX)
Postings to the GR/IR clearing account occur in the case of goods and invoice receipts against purchase orders. For more on the GR/IR clearing account, refer to the SAP Library (documentation MM Material Valuation).
Caution
You must set the Balances in local currency only indicator for the GR/IR clearing account to enable the open items to be cleared. For more on this topic, see the field documentation.
GR/IR clearing for material ledger (WRY)
This transaction/event key is not used from Release 4.0 onwards.
Prior to 4.0, it was used for postings to the GR/IR clearing account if the material ledger was active. As of Release 4.0, the transaction is no longer necessary, since postings to the GR/IR account in parallel currencies are possible.
Reg,
Ashok
assign points if useful. -
Account determination screen shot
Hi sd gurus,
can any one plz send me the screen shots for acount determination screen shots in sd point and rebates screen shots.Hi
Pls go to t.code: VKOA - to create Revenue account determination, and
Application: V
Condition type: KOFI & KOFK
Chart of accounts: INT
Sales organization: 1000,
Copy all the enteries in the following seletion and copy to your company code for all the five tables.
Reward if it helps
Regards
Prasanna R -
Hiii i am an SD consul and have made all the required settings for rebate, when I create an invoive the conditions tab displays B002 with the right amount....but on saving the invoice it gives me an error tat theres been an error in acc determination ....... if someone cld guide me as to how i cld resolve this problem then the accrualss will be visible in the agreement and i can move forward.(plss provide me a step by step explanation --no ides linkss plsss)
Regards
maddyIn spro follow the steps below;
Define account key
Define account determination types
Assign account keys
Maintain account determination pro
Define access sequences
Assign G/L accounts
The last step is where the GL accounts get assigned to the key in VKOA.
You can also review the billing document in Environment - acct determine analysis-revenue accounts to see which assignment table is in error.
pls assign points to say thanks. -
ERRORS: REBATE & ACC DETERMINATION
Hi,
Error:
In Rebate processing.
Sales volume agreement ( Number=91) is not current
In Account determination
Accounting document is not generated.FYI - Basically agreements can only be settled if their condition records are not marked as changed (field KONP-KSPAE). Otherwise, no final settlement can be performed and the system displays message: VK780 "The sales volume for agreement & is not current".
First you can activate the new procedure by activating standard statistics structure S136 by using TCode OMO1. You must set the update to 'Synchronous updating (1)'.
Then update billing documents, this you can do by using program SDBONT06 (TCode SE38) or TCode VBOF to update the affected billing documents.
For more clarity or reference, you can refer following SAP Notes
- Note 105681 - Consulting: New rebate procedure
- Note 456458 - FAQ: How does SDBONT06 work
Regards
JP -
Account determination error - in creation of invoice
Hello experts,
i have an error in creation of invoice, after( pgi post goods issue)
will you please help me out to solve this error.
thanks & Regards,
yogesh rainahello sir,
After going throuth this path it shows no gl account in account determination chart
as below
Condition type Message Description
ZPR0 123 Access KOFI not carried out (initialized field)
Access Message Description
10 123 Access KOFI not carried out (initialized field)
20 121 No G/L account found in Account determination type KOFI
30 123 Access KOFI not carried out (initialized field)
40 121 No G/L account found in Account determination type KOFI
50 121 No G/L account found in Account determination type KOFI
60 123 Access KOFI not carried out (initialized field)
Maybe you are looking for
-
My iMac (intel based) all aluminum, OSx 10.6.8, 2.5 GHz Processor, bought about 6 months ago. It was working fine till now. Last few days a hazy blur patch appears in the center of the screen. It's growing with each passing day. How can I get rid of
-
Hi, How do I create more than one user at once? Thanks
-
Posting to only Leading or Non leading ledger in New GL
Dear Experts, What are the circumstances under which a there could be a requirement of posting a JV in only Leading or Non leading ledger in New GL? And also it would be of great help if someone tells me the procedure of doing such posting. Thank yo
-
JDev 11.1.1.2.0: Firefox 3.0 as an external tool: Please suggest
Hi, I added Firefox 3.0 as an external tool in JDev 11.1.1.2.0. But, am not able to view content of an XML file using Firefox external tool in JDev window. Firefox is opening up but not displaying any content. Can someone please suggest if Firefox 3.
-
Missing keys with ultrabook pro keyboard helix 2
I recieved my Helix 2 the other day, and the tablet portion works perfectly, but the upgraded keyboard that I ordered with it came with 2 missing keys. Is there a way I can return just the keyboard and get a new one free? Or do i have to send the who