Rebel Xsi display stopped working will not take photo

I have had this camera for a few years.  I took it with me and left it covered in the car (hot day) and now the display will not light up and the camera will focus on an object but will not take photo.  
Would heat cause the display to stop working?  What can be done to possibly correct this issue?

Hello Luckclover,
Since your EOS Rebel XSi needs service, we are glad to assist you at one of our Canon Factory Service Centers.  Through our web site linked to below, you would be able to request and set up service through Canon.
EOS Rebel XSi.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Similar Messages

  • Ipad camera will not take photo stuck on video

    ipad camera will not take photo stuck in video mode

    Try sliding the words up or down to select the various modes.

  • HT1414 Camera will not take photos, screen black, cover not in way?

    I suddenly can not take photos with my iPad, fully changed. Any ideas?

    Try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. The screen will go blank. Be patient, the device will power ON again in the normal way. It is app and data safe

  • Bridge CC stopped working / will not launchc

    I installed the Creative Cloud on my Windows 7 / PC machine the last two days.  I installed Bridge CC yesterday and now today it will not work.  Not sure what the problem good be.  Rebooted 3x.

    Reset preferences.  Hold down Ctrl key and start BRidge.  You should get a reset window.

  • IPad just stopped working; will not turn on

    My iPad has suddenly stopped working. I picked it up this morning to read one of my newspaper apps and it won't turn on. The screen is completely blank. It was working normally last night. I thought maybe the battery had run out so I plugged it is to recharge but it still would not turn on. Do you think it might be the battery? I bought it in July. Thought the battery would last longer than that.

    Thank HEAVENS!!!! I was crying about my ipad, i have done so much to protect it and as i'm walking out of class to my car (my ipad worked during my entire class) i pull it out of its carrying case and push the home button and NOTHING! but the power and home button for 10 seconds, i'm so happy!!! I'm crying tears of joy right now as my BABY IS BACK!!!!! Now i'll be babying my 64GB wifi + 3g ipad even more she's not even a year old!!! I am so glad that i found this post in the apple discussion section. BLESS YOU!!! But how strange that this happened almost 10 days apart from yours doing the same thing. What's going on apple?

  • Lightroom 3.3 stopped working will not even open says lightroom stopped working and closes.

    Lightroom 3.3 just stopped working error says lightroom has stopped working and shuts down. installed photoshop CS3 is that the problem?

    First step- try to update to 3.6 and see if it gets rid of your problem.

  • Adobe PSE 12 stopped working - will not load

    I am using WIN 7, with all updates.  After some slowdown issues were fixewd, Adobe PSE 12 will not run; doesn't open at all.

    Can you try launching directly from the Editor Application. Go to:
    C:\Program Files (x86)\Adobe\Photoshop Elements 12
    Click image below. Right-click on the application file (PhotoshopElementsEditor) and choose “Run As Administrator”

  • ICloud keeps asking for password but will not take it. All other devices work but not my IMac???

    ICloud keeps asking for password but will not take it. All other devices work but not my IMac???

    Exactly which password are you inputting? iCloud looks for your AppleID password.

  • Iphone 3G has stopped playing video entirely. (will not take play videos taken on the iphone no longer play), unable to transfer to computer either. Says Parameter error when I try to copy or play file

    My Iphone 3G has stopped playing video entirely. (will not take play videos taken on the iphone), unable to transfer to computer either. Says Parameter error when I try to copy or play file. very frustrating, not being able to access past videos taken at all. This has been going on for a while now

    Have you done any of the basic troublshooting steps described in the User Guide (Appendix B) - Restart, Reset, Restore?

  • My new iPhone 4s will not activate imessage or face time,, it seemed to work and then it stops and will not activate at all now

    my new iPhone 4s will not activate imessage or face time,, it seemed to work and then it stops and will not activate at all now

    Try following the steps in the following article:
    iOS: Troubleshooting FaceTime and iMessage Activation
    http://support.apple.com/kb/TS4268

  • Hp Pavilion dv6 Notebook , Driver display stopped working and has recovered

    Hi, I have a problem with my driver display.... 
    I installed the Autocad program , and after 2 weeks, every time that I open the Autocad, after 4 or maybe 5 min. the screen goes black and after that a note shows up saying: Driver display stopped working and has recovered. I Try to update everything using the Hp support assistance and still i have the same issue. I don't know much about the computer and the driver so I will appreciate if  somebody give me a solution. Thank you!!!

    Hello @youleeus,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I have read your post on how the driver display has stopped working, that it has recovered, and I would be happy to assist you in this matter!
    To further diagnose this issue, I recommend following the steps in this document on "Display driver stopped responding and has recovered" error in Windows 7 or Windows Vista. This should help prevent the GPU on your computer from timing out.
    Please re-post with the results of your troubleshooting, and I look forward to your reply!
    Regards
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • 23" studio display stopped working

    My 23" studio display stopped working with my mac pro but works with MBP.
    It started by not waking up everytime my Mac Pro went to sleep, but if I unplugged it and plugged it all back it and restarted it would come on however now the screen will not even come on. The power light is on and when I plug it into my MBP it works fine.
    I'm not exactly a tech whiz but could it be the graphics card? Which is currently - ATI Radeon X1900 XT 512MB
    It's out of warranty so before I trek down to the Apple store I thought I'd see if I can fix it myself.
    Any help would be appreciated thanks!

    Same for me, after having installed SL and allowing the computer to go to sleep. When trying to wake it up, the computer boots (at least it sounds so), but the display stays black. If in system prefs/energysaving/ I set the computer to "never sleep" but allow the screen to go asleep it works OK. As soon as the computer goes to rest it is impossible to get the screen working again, have to do a physical reboot. Works fine then......., but I really would like to use the energy savings prefs!
    I've looked into other threads of similar topics, did not find any clues. Judging by the number of threads, this is a well-known issue, waiting for to be answered by Apple.
    Suggestions?

  • Mac mini server - will not take 4GB so-dimm in bank 0

    Mac mini server - will not take 4GB so-dimm in bank 0
    Hello,
    Memory works ok as long as the old 2gb 1066 so-dimm is in bank 0.
    Switching the dimms around is no go. It seems to need that bank 0 populated with an old 2gb.
    I can use only one 2gb and one 4gb for the mini server to boot.
    It seems to have a hard time figuring out the 2x4gb configuration.
    Tried PRAM and NVRAM reset. Always getting 3 beeps.
    Any chance of getting the full 8gb detected?

    Hi All,
    I had the same problem that you, I had a mac mini server late 2009 with 10.7.3 OS X, with 4 GB of memory.
    I have got these two memories on amazon:
    "8Go mémoire - Kit double canal SAMSUNG original 2 x 4 Go 204 broches DDR3-1066 PC3-8500 SO-DIMM (2x M471B5273BH1-CF8) mémoire portable ordinateur DD"
    First test to install in the mac mini:
    Slot 0 - 4 GB
    Slot 1 - 4 GB
    3 beeps
    2nd test
    Slot 0 -
    Slot 1 - 4 GB
    OK
    3rd Test:
    Slot 0 - 4 GB
    Slot 1 - 1 GB
    3 beeps
    4th Test:
    1 - 1 GB
    2 - 4 GB
    OK
    5th test:
    reset PMU
    Slot 0 - 4 GB
    Slot 1 - 4 GB
    3 bips
    6th Test:
    I did a test of the 2x4 GB in a mac mini 2010
    OK
    7th test:
    Slot 0 - 2 GB
    Slot 1 - 4 GB
    OK
    After to read this forum I gave up and I decided to let the mac mini with 6 GB. Well, as I wanted to try it again one last time, I tried to put the slot 0 memory forcing a bit. But I did not noticed nothing special.
    Well, at this last time, it works. 8 GB in the mac mini server
    here some screenshots:
    I hope this info will help you to resolve this problem. But seriously, I am not giving you nothing else than hope

  • Mac Mini 2.53 C2 Duo will not take any disc

    Hi all here is my problem… I have a Mac Mini C2 Duo 2.53 that will not take any disc DVD or CD when it is turned on. If I turn it of and put a DVD or CD in the slot it will load on boot and play and read. If I eject the disc and load a new disc with in 5 seconds it will load a new disc if I wait longer than 5 seconds I can't load any form of disc I have to turn off the Mac.
    I have Installed 2 different BD drives and 2 different DVD drives all with the same result. Any ideas would be greatly appreciated.
    Cheers Patrick

    I have installed now 6 different drives all new… all do the same thing I could cry have reset the SMC a few times no luck. The drives work fine in a different Mac Mini just not in this one. Is weird that they all work when the Mini is booting but not afterwards. I don't want an external drive as this defeats me buying an older Mini with internal drive.

  • HT3728 Express will not take software upgrade.  Message says to install 5.6 and when I do it will not show, says not compatible with this version of Mac. 10.8 OS-X, why not?

    Unable to update airport express.  When connecting msg says to install 5.6, download and will not take install says it is not compatible.

    This is a dilemma. Older Express models require AirPort Utility 5.6.1 or a similar, older version of AU. Mountain Lion will refuse to install it. What to do?
    As it turns out AirPort Utility 5.6.1 runs perfectly fine on Mountain Lion. If you had the foresight to have archived it somewhere (such as with Time Machine or equivalent) you can simply copy the app to your computer and use it. The problem is that the installer package will refuse to work on a Mountain Lion system.
    If you don't have an already-extracted version of AU 5.6.1 there is a solution: you simply need Pacifist to extract the app from the installer package. I also found another technique described on this page:
    http://frank.is/mountain-lion-and-the-old-airport-utility/
    Good luck!

Maybe you are looking for