Rebooting my 8900 takes more then 10 minutes :S

when i first bought my 8900 before 10 months, the reboot time was almost like 1-3 mins, now it takes more then 10 minutes how come ??
is there something wrong or what?
ive been googling this problem for more then a month now with no results ,,,,,
anyone can help ?

The amount of applications, can cause the slow reboot. I would suggest doing a test, backup your device then perform a wipe. (You will need to reinstall your applications again.)
Once the device is wiped, pull the battery then test the reboot time.
If its just as slow, you may want to try a clean application load of the device software. (Or you can do this anyway. It won't hurt)
How to perform a clean reload of the BlackBerry Device Software using BlackBerry Desktop Manager for Windows - KB11320
http://www.blackberry.com/btsc/KB11320
Once this is done, test the reboot time. Once the reboot is complete, restore your data then test.
Hope this helps.

Similar Messages

HT201274 i try to reset my iphone4 and take more then 2 hour and it still running ( 6am untill now ) why is that ????

need help why my iphone 4 still running seem i star to reset 6 am, untill now ????

First, turn your phone off: Press both the Home button & Sleep/Wake button at the same time, until your phone turns off, then release. Then try Recovery Mode:
Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still dont see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new.

WebAccess takes over 5 minutes to start servicing

Everytime the GW8 Linux server is reboot, WebAccess would take over 5 minutes to begin its service.
Further examining the logs found this on /var/log/apache/error_log when the server starts running after a reboot:
[Wed Jul 23 09:56:32 2014] [error] (111)Connection refused: proxy: AJP: attempt
to connect to 127.0.0.1:8009 (localhost) failed
[Wed Jul 23 09:56:32 2014] [error] ap_proxy_connect_backend disabling worker for
(localhost)
[Wed Jul 23 09:56:32 2014] [error] proxy: AJP: failed to make connection to back
end: localhost
[Wed Jul 23 09:56:33 2014] [error] proxy: AJP: disabled connection for (localhos
t)
The above pattern keeps repeating everytime a connection comes... and automagically disappears after a while... WebAccess then starts running...
Any clues???

In article <[email protected]>, Glio wrote:
> Everytime the GW8 Linux server is reboot, WebAccess would take over 5
> minutes to begin its service.
> /var/log/apache/error_log ... after a reboot:
> [Wed Jul 23 09:56:32 2014] [error] (111)Connection refused: proxy: AJP:
> attempt to connect to 127.0.0.1:8009 (localhost) failed
> [Wed Jul 23 09:56:32 2014] [error] ap_proxy_connect_backend disabling
> worker for (localhost)
This is an apache issue where part of it is looking for its proxy engine.
What distro/version of distro are you running? Is this an OES box?
Is anything else using that port? (Possible conflict)
netstat --listen | grep 8009
Andy of
KonecnyConsulting.ca in Toronto
Knowledge Partner
http://forums.novell.com/member.php/75037-konecnya
If you find a post helpful and are logged in the Web interface, please
show your appreciation by clicking on the star below. Thanks!

Select query taking long time (more then 6 min)

Dear experts,
DATA:IT_CHEQ2 TYPE TABLE OF TY_BSAS,
     WA_CHEQ2 LIKE LINE OF IT_CHEQ2.
DATA : IT_CHEQ3 TYPE STANDARD TABLE OF TY_BSAS WITH HEADER LINE.
TYPES:BEGIN OF TY_BSAS,
       BUKRS TYPE BSAS-BUKRS,
       HKONT TYPE BSAS-HKONT,
       AUGDT TYPE BSAS-AUGDT,
       AUGBL TYPE BSAK-AUGBL,
       ZUONR TYPE BSAK-ZUONR,
       GJAHR TYPE BSAK-GJAHR,
       BELNR TYPE BSAK-BELNR,
       BUZEI TYPE BSAK-BUZEI,
       BUDAT TYPE BSAK-BUDAT,
       XBLNR TYPE BSAK-XBLNR,
       BLART TYPE BSAK-BLART,
       SHKZG TYPE BSAK-SHKZG,
       DMBTR TYPE BSAK-DMBTR,
       WMWST TYPE BSAK-WMWST,
      AUGGJ TYPE BSAK-AUGGJ, " CLEARING FYSICAL YEAR
       OT_TAX TYPE BSAK-DMBTR,
       TDS   TYPE BSAK-DMBTR,
       VAT    TYPE BSAK-DMBTR, "Vat amount
       WCT   TYPE BSAK-DMBTR,
       ADV    TYPE BSAK-DMBTR, "Advance
       CHAMT TYPE BSAK-DMBTR,
       CHNO TYPE PAYR-CHECT,
       CHDATE TYPE PAYR-ZALDT,
       DBIT_NOTE TYPE BSAK-DMBTR,
       PAY_ADJ   TYPE BSAK-DMBTR,
       PEND_SES TYPE BSAK-DMBTR, "PENDING SES
       CR_PARTY(50) TYPE C,
      END OF TY_BSAS.
SELECT BUKRS HKONT AUGDT AUGBL ZUONR GJAHR BELNR BUZEI BUDAT XBLNR BLART SHKZG
                  DMBTR WMWST
                  FROM BSAS INTO " APPENDING
           CORRESPONDING FIELDS OF TABLE IT_CHEQ3
                  FOR ALL ENTRIES IN IT_CHEQ2
                  WHERE AUGBL = IT_CHEQ2-AUGBL and
                    BUKRS = IT_CHEQ2-BUKRS   AND
*                  AUGBL = IT_CHEQ2-AUGBL
                      GJAHR = IT_CHEQ2-GJAHR
                  AND XBLNR = IT_CHEQ2-XBLNR.
line company code hkont       augdt               augbl               zuonr              gjahr        belnr                 buzei budat
1     1018     0012100030     20110831     2100009710     20110831     2011     2100009710     005     20110831
xblnr       blart        shkzg
RA03     KZ         H            37067.00         0.00     2011     0.00     0.00
2     1018     0012100030     20110831     2100009710     20110831     2011     2100009710     006     20110831
     RA03     KZ     H     393850.00     0.00     2011     0.00     0.00
3     1018     0012100030     20110831     2100009710     20110831     2011     2100009710     004     20110831     RA03     KZ     S     723589.13     0.00     2011     0.00     0.00
4     1018     0012100030     20110831     2100009710     20110823     2011     3900001250     001     20110823     RA03     RS     H     712921.13     0.00     2011     0.00     0.00
5     1018     0023200000     20110831     2100009710     20110831     2011     2100009710     008     20110831     RA03     KZ     H     21788.00     0.00     2011     0.00     0.00
6     1018     0023200000     20110831     2100009710     20110831     2011     2100009710     007     20110831     RA03     KZ     H     1162821.00     0.00     2011     0.00     0.00
if i put same entry in se11 for bsas it takes 7 second
and in query takes more then 6 min ,kindly tell why
help me gurus
regards
victor

Tested point 2.
There is no difference.
REPORT Z_YZ_SELECT_ORDER.
types: begin of t_orderadm,
         description type CRMT_PROCESS_DESCRIPTION,
         created_at type COMT_CREATED_AT_USR,
         LOGICAL_SYSTEM type CRMT_LOGSYS,
         TEMPLATE_TYPE type CRMT_TEMPLATE_TYPE_DB,
         VERIFY_DATE type CRMT_VERIFY_DATE,
         GUID type CRMT_OBJECT_GUID,
       end of t_orderadm.
types: begin of t_orderadm_1,
         GUID type CRMT_OBJECT_GUID,
         description type CRMT_PROCESS_DESCRIPTION,
         LOGICAL_SYSTEM type CRMT_LOGSYS,
         TEMPLATE_TYPE type CRMT_TEMPLATE_TYPE_DB,
         created_at type COMT_CREATED_AT_USR,
         VERIFY_DATE type CRMT_VERIFY_DATE,
       end of t_orderadm_1.
data: lt_orders type table of t_orderadm,
      lt_orders_1 type table of t_orderadm_1.
select description created_at logical_system template_type verify_date guid
into table lt_orders
from crmd_orderadm_h.
select guid description logical_system template_type created_at verify_date
into table lt_orders_1
from crmd_orderadm_h.
write 'done'.
First select - mixed order of fields. Response time: 82.155 microseconds for 39380 records selected.
Second select - fields in the order of the table. Response time: 81.061 microseconds for the same 39380 records selected.
Then I changed the order of SELECT statements. I have put first the select with ordered fields, and second - select with mixed order of fields. The runtimes were the following:
Ordered fields - 82.649 microseconds
Mixed order of fields - 80.270 microseconds.
So I'm going to change the Wiki page in order to avoid in future advices that make no sense.

How to Select More then 1000 values in Multi-Select prompt!!!

Hello Users,
I have Scenario where i have to pass all the values from prompt to report and the values in the prompt are coming from session variable, so whatever value access user has the report will run with that only...
Now the question is that Multi-Select Prompt is not able to take more then certain values, so is there any way that we can increase the limit for selected values??
in-short how to increase the limit for selected values in multi-select prompt??
Thanks In Advance!!!

Hey David,
The Scenario is like, we have data level security on "Unit" attribute. now based on the user selection when user logs in he should able to see the report only for those units which he/she has access.
in total we have 1800 units available, now for 5-10 units access is fine, but the question will arise when user will not have only some units access from 1800 units.
because report will not take those values from the multi-select prompt reason is that multi-select prompt is not able to take more then certain values in selected side.
now in multi-select until-unless u have data coming in selected side those values will not pass. so i have kept the sql in default for that prompt.
so when user logs in he will able to see those values in selected side for the multi-select prompt, but when values increase from some level it's going automatically in un-selected side.
i want everything on selected side of multi-select prompt.
Let me know if you need any further details.

FileStatsAgent process bug? (more then 90% CPU and Mac gets hot)

Whats FileStatsAgent? It takes more then 90% of CPU-Power. My Mac-Book Pro gets hot and i have to kill the process by my own every time. Tried reinstall and clean install, nothing works. never had this issue when using T, SL, L, ML..

Hello,
According to the man page, FileStatsAgent "collect file stats." Open Activity Monitor and get info on the FileStatsAgent process. Open the "Open Files and Ports" tab and there will likely be a music file that the process is hanging on.
In another thread, Dave determined that the MP3 file it was hung up on was corrupted by using a program called MP3 Scan + Repair. Deleting the offending file solved the issue for many of us.
Hopefully this solves your problem!

I am having the problem . it says it shouldnt take more than 3 minutes then i get this message Could not activate iphone. i have taken the sim card out and put it back in even then its of no use. if any one out there can help us it would be very nice

i am having the problem in my 3gs iphone. it says it shouldnt take more than 3 minutes then i get this message Could not activate iphone.
i have taken the sim card out and put it back in even then its of no use.
if any one out there can help us it would be very nice of them. thank you for your time.

I can not get to iPhone screen, so no way to get to Settings. That is the problem. When I connect phone to iTunes I get screen asking to insert SIN card. On the phone I'm getting Cinfigure screen asking Launguage , Country or Region, Wi-Fi, ( I can connect to my home wi-fi), and last screen "Activating your iPhone". After two minutes of waiting IM getting message: Your iPhone could not be activated because the activation server in temporary unavailable. try connecting to iTunes or try later or contat apple.com/support.
Like I mention, I went to Bell as well Rogers store and tried to insert active SIM card with no results.
Yes, my friend unlock the phone to use with Rogers but I don't know where

Mac Mini is very slow and rebooting takes 20-30 minutes

Hi
My Mac Mini has just been updated to 10.10.3 and it seems to work very good. Then same days ago the new smaller update arrived and I installed it.
It is extremely slow and a reboot can take about 20-30 minutes.
The Task monitor does not show any extrem CPU values. Open Preference takes about one minute.
My Mac Book Pro on the other hand is working 100% perfect after the lates update. Same go with all Mac Books at the office.
I do not know what to do: A try to find what makes it so slow, B reinstall Mavericks (luckily I have made a USB installer)
Any tips are most welcome.

Back up your Mac if you have not done so already. To learn how to use Time Machine read Mac Basics: Time Machine backs up your Mac - Apple Support.
A Mac that spontaneously begins to exhibit symptoms such as you describe usually has a hard disk that has failed. Unless all the information on that Mini can be considered disposable, don't do anything else until you back up.

After firefox loads, the first web pulled in takes 4-5 minutes, then all the rest of the webs work normally. It doesn't matter what web i pull in first. I have norton360.

After Firefox loads the home page (google), the first web site I click in my bookmarks takes 4-6 minutes to come in. Clicking on screen makes it go half-tone until it loads. From then on, all other bookmarks come in fast. It doesn't matter what bookmark I load first, it always takes major minutes. I am using Norton 360 and have even disabled the security and web checking and it made no difference.

Okay, here's what I found out. Followed the above instructions...no joy. I think this maybe needs to be posted in a general OS forum, as I'm thinking this is more about that vs just being about iPhoto/iTunes. Here's what I tried and learned.
A new account allowed iPhoto to open up immediately. However, iTunes seemed a touch slow...not sure if that is just due to it being a new account. So, I deleted that account and moved on to the preferences instructions above.
I removed all preferences and placed them in a "preferences A" folder on the desktop. Launched iPhoto and got the exact same results. Super slow...took forever to open. Took forever to close. Same with iTunes.
So I placed all of the removed preferences back into the folder and decided to start launching and closing apps to see what's affected, what's not. Here are the findings.
iPhoto - The worst of all. Takes 4 minutes to open.
Mail - Opens fine, closes very slowly...apprx 1 minute
Calculator - This now opens incredibly slowly. Also noticed that the blue light below a launching app in the dock that seems to radiate was not radiating immediately....just sort of sat there. About a minutes passes, then it radiates for a second and calculator opens. Quitting is instant
Garageband - Launching is slooooow, quitting is instant.
Lightroom 3 - quitting is slow....quit results in upper-left menu items flashing once, then beach ball for about 30 seconds.
These apps check out perfectly fine with no problems launching or quitting: iCal, Safari, Firefox, Aperture, Photoshop (CS3), Illustrator (CS3), InDesign (CS3), Acrobat, Suitcase, Image Capture, Disk Utility, Text Edit, Photo booth, Final Cut Pro.
So I'm at a loss. This may be more of an OS issue, but figured I'd post here to follow up on the suggestions given. I think I'll pose a question in the OS forums. I'm thinking this might mean boxing up the iMac and making a trip to the genius bar. It's incredibly frustrating.

When I restart my Mac, the grey screen appears like usual. But it takes more than 40 minutes (more) for it to load to finish restarting the Mac. What should I do?!

When I restart my Mac, the grey screen appears like usual. But it takes more than 40 minutes (or more) for it to load to finish restarting the Mac. What should I do to fix it?!

Disconnect all devices from your computer if you have not already done so. Restart again. If the problem has been resolved, you had a peripheral conflict. You will then have to reconnect the devices one at time, restart, to locate the culprit.
Login Items is another culprit. Check your login items.
System Preferences>Accounts>Login Items
Delete/disable all you do not need or want.

QUERY TAKES MORE THAN 30 MINUTES AND IT'S CANCELED

Hi
I have one workbook and sometimes it takes more than 30 minutes to be executed, but Discoverer cancels it, Does anybody know how to alter this? I mean if the query takes more than 30 minutes i need it to be finished.
Any help will be appreciated.
Best Regards
Yuri López

Hi
You need to alter the timeout settings and these are located in multiple places.
Discoverer Plus / Viewer using this workflow:
1. Edit the pref.txt file on the server located here: $ORACLE_HOME\discoverer\util
2. Locate the preference called Timeout and change it to your desired value in seconds. The default is 1800 which means 30 minutes
3. Save pref.txt
4. Execute applypreferences.bat if running on Windows or applypreferences.sh if running on Linux or Unix
5. Stop and restart the Discoverer server
Discoverer Administrator using this workflow:
1. Launch Discoverer Administrator
2. From the menu bar, select Tools | Privileges
3. Select the user
4. Open the Query Governor tab
5. If "Prevent queries from running longer than" is checked, increase the limit
6. Click OK
Note: if "Prevent queries from running longer than" is not checked then the Timout in the pref.txt controls how long before the queries stop. If it is checked and it is lower than Timeout you need to increase it.
Let me know if this helps
Best wishes
Michael Armstrong-Smith
URL: http://learndiscoverer.com
Blog: http://learndiscoverer.blogspot.com

From few days, it takes more than 30-60 minutes to open Firefox. I am on Vista. I have tried to reset firefox & have uninstalled and installed it again.

Hi,
From few days, it takes more than 30-60 minutes to open Firefox on my laptop. I am on Vista & have got Anti Virus as well. I have already tried to reset firefox, have uninstalled and installed it again. My firefox version is 29. But nothing seems to help.
Can you please help in this regard, as I really do love using Firefox, but due to this issue, I am forced to use other browsers.
Thanks
Gaurav

It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full, unrestricted, access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
*https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Create a new profile as a test to check if your current profile is causing the problem.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer files from a previously used profile to the new profile, but be cautious not to copy corrupted files to avoid carrying over the problem
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Module ContrentSwitch 3 command takes more than a minute to respond

I have two CAT 6509 switches with a CSM module in slot 3 in SW1 and a CSM module in slot 8 in SW2.
From the router config when I type - module ContentSwitch 3 on MSFC in SW1 - it takes more than a minute to get the CSM config prompt.
Then every command I type - eg, vlan 46 client - takes about a minute to respond.
This happens only on CAT 6509 SW1. On the other CAT 6500 - SW2 - which has the CSM in slot 8 - when I say - at router config prompt - module ContentSwitch 8 - I get an immediate response with the csm config prompt and every command I type I get immediate response.
One CAT 6500 number Sw1, I did a reset 3 at the CatOS prompt and tried again. Same problem, Could it be a H/W problem on this CSM in this CAT6509. The CSM versions of the two CSMs in the two CAT6509 are 4.1(3) and the MSFCs in the two CAT6509 are 12.1(2)E.
It can't be version problem because the two CSMs and the two MSFCs in the two CAT 6509 have the same versions. Tomorrow I will replace the CSM in the problem CAT6509 and try again.
I have configured one CSM and I need to configure this other CSM whick takes more than a minute to respond to commands and so I gave up after I typed 3 or 4 commands.
Any suggestions please?

I meant to type 12.1(22)E2. Please see below for the version and it is the same on the MSFC of both CAt6509 switches.
IOS (tm) MSFC2 Software (C6MSFC2-JK2SV-M), Version 12.1(22)E2, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
CSM is 4.1(3) - see below:
HTCUITS1> (enable) show mod
Mod Slot Ports Module-Type Model Sub Status
1 1 2 1000BaseX Supervisor WS-X6K-SUP2-2GE yes standby
15 1 1 Multilayer Switch Feature WS-F6K-MSFC2 no standby
2 2 2 1000BaseX Supervisor WS-X6K-SUP2-2GE yes ok
16 2 1 Multilayer Switch Feature WS-F6K-MSFC2 no ok
3 3 4 Content Switching Module WS-X6066-SLB-APC no ok
4 4 8 Intrusion Detection Mod WS-SVC-IDSM-2 yes ok
5 5 8 1000BaseX Ethernet WS-X6408A-GBIC no ok
6 6 48 10/100/1000BaseT Ethernet WS-X6548-GE-TX no ok
7 7 48 10/100BaseTX Ethernet WS-X6348-RJ-45 no ok
Mod Module-Name Serial-Num
1 SAD051905VW
15 SAD0518057D
2 SAL085286E3
16 SAL09020C29
3 SAD0825082B
4 SAD091208RC
5 SAL06110XWG
6 SAL091389PP
7 SAL05052SZ5
--More--
Mod MAC-Address(es) Hw Fw Sw
1 00-01-64-76-08-3e to 00-01-64-76-08-3f 2.2 7.1(1) 8.3(7)
00-01-64-76-08-3c to 00-01-64-76-08-3d
15 00-06-28-75-f1-00 to 00-06-28-75-f1-3f 1.2 12.1(22)E2 12.1(22)E2
2 00-09-12-58-2d-ce to 00-09-12-58-2d-cf 5.1 7.1(1) 8.3(7)
00-09-12-58-2d-cc to 00-09-12-58-2d-cd
00-d0-04-e0-6c-00 to 00-d0-04-e0-6f-ff
16 00-13-19-34-f6-80 to 00-13-19-34-f6-bf 2.8 12.1(22)E2 12.1(22)E2
3 00-11-5c-eb-5f-ca to 00-11-5c-eb-5f-d1 1.7 4.1(3)
4 00-12-80-f1-31-26 to 00-12-80-f1-31-2d 5.0 7.2(1) 4.1(4)S91
5 00-09-12-60-d4-44 to 00-09-12-60-d4-4b 2.1 5.4(2) 8.3(7)
6 00-13-7f-4d-ae-c0 to 00-13-7f-4d-ae-ef 10.1 7.2(1) 8.3(7)
7 00-03-6c-1c-f1-70 to 00-03-6c-1c-f1-9f 1.5 5.4(2) 8.3(7)

Every page I load takes more than a minute to load - clicking anywhere gives message that firefox is not responding. I don't like this version, it sucks - tabs are not defined well, can barely see them.

for instance, if I load www.msnbc.com it will take more than a minute to fully load in that if I click on a link or try to scroll, the entire browser locks up, if I try to scroll, or click on the page, I get the message that the program is not responding.

If you've updated from a version as ancient as 3.5.4, then you run the risk of encountering problems. You should start with a fresh profile to ensure old preferences, data files and changes made by extensions are not interfering.
First, create a backup copy of your profile folder, just to be safe.
* [[Back up and restore information in Firefox profiles]]
Then use the Reset Firefox feature.
* [[Reset Firefox – easily fix most problems]]
If the problem persists, see the following article.
* [[Firefox hangs or is not responding - How to fix]]
Do not reinstall old versions of Firefox. They contain security vulnerabilities and shouldn't be used. Very old versions might also be unable to handle data files in your profile folder in their new formats, which can lead to all sorts of problems. And lastly, many websites require a modern browser to work properly.
* https://www.mozilla.org/security/known-vulnerabilities/firefox.html

XDCAM 1080i60 with Chroma rendering 30 minute episode take more than 17 hours is it usually?

XDCAM 1080i60 format with Chroma rendering 30 minute episode take more than 17 hours is it usually?

All depends on the system...
If by "Chroma rendering" you mean chroma key rendering then it seems quite slow (but I cut on a hopped up
8X 3.2GHz Mac Pro with a lot of everything, so slow is relative.)
If you mean something like a Magic Bullet Colorista "treatment", that's another story. I've seen that increase renders by as much as 25X the duration, i.e., a 30 minute show might take 12-15 hours on a slow machine.

Rebooting my 8900 takes more then 10 minutes :S

Similar Messages

Maybe you are looking for