Rebooting the server with ASM instance............

Hi folks
I have to go for reboot of the server as I am adding a RAW device for having one more mount and also will be adding a disk to disk group.
1) alter diskgroup diskgroupname add disk '/u09'; Is this correct to add a new disk to the diskgroup of ASM instance?
2) I will have to shutdown all the six instances within the ASM instance and shutdown the ASM instance? Is this correct
After a successfull Rebbot is done
3) I will have to startup the ASM instance first and one by one startup the other six instances? Is it the right sequence.
Please reply at the earliest.
Thanks
Shiva

Hi
If you want to shutdown the server to add the RAW device then:
1. Shutdown all instances but shutdown ASM instance in the end.
2. Shutdown server and add the RAW device.
3. Startup server
4 Add the diskgruop and also you can increase the value of rebalance parameter.
5. Start all the instances that are using this ASM instance.
Hope this Help
Regards

Similar Messages

SCCM central site and primary site use the same SQL SERVER with two Instance.

Hi Guys,
I want deploy SCCM 2012 central site and primary site in my domain. But Only one Sql server for me. Any one can tell me how to install the central site server and primary site server with the same SQL SERVER with two instance.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
Sean Xiao
TechNet Community Support

Although you can install like the configuration you said above, we do not recommend you do it this way. If your SQL box has problems, all the data will go away and you will not have data redundancy.
You need to configure the different SQL Port and SQL Broke service port e.g.
SQL port 4023 SQL Broke Service port 4022 for CAS instance
SQL port 4024 SQL Broke Service port 4021 for PRI instance
Juke Chou
TechNet Community Support
I agree with Johan and this configuration should not be used. But I want to clarify that the default ports for "SQL port" (actually, SQL over TCP) is 1433 and the SQL Broker Service uses 4022. The configuration above should work but the "correct" would be
to use 1433 and 4022 for the CAS and 10434 and 4023 for the Primary :)
You can read more about Network Ports used by Configuration Manager here
http://technet.microsoft.com/en-us/library/hh427328.aspx#BKMK_CommunicationPorts
/Tim
Tim Nilimaa | Blog: http://infoworks.tv | Twitter: @timnilimaa

Oracle doesn't started when When I reboot the Server.

Dear All,
I have installed 10g using ASM and Oracle-managed files on a Windows Server 2003 (Second Edition , Service Pack 1 ) system . I have put no data in, and I take the defaults. It works fine - until the system reboots.
Oracle doesn't started when When I reboot the Server.
Here is what I get from sqlplus, following the instructions to start an ASM instance:
SQL*Plus: Release 10.1.0.2.0 - Production on Mon Oct 11 10:47:53 2006
Copyright (c) 1982, 2004, Oracle. All rights reserved.
SQL> startup
ORA-01078: failure in processing system parameters
ORA-01565: error in identifying file '+DATA0/10g/spfile10g.ora'
ORA-17503: ksfdopn:2 Failed to open file +DATA0/10g/spfile10g.ora
ORA-15077: could not locate ASM instance serving a required diskgroup
Thanks for helping,
Debraj Banerjee

It look like your ASM instance is not yet started. Try the following:
$>export ORACLE_SID=+ASM (set ORACLE_SID=+ASM if you are on Windows)
$>sqlplus /nolog
SQL>startupThen you start up your other instance.

Sql server with multiple instance

hi All,
i want to install sql server with two instance and i want to assign two separate is ips for both default instance and named instance and both should work like
two different server
note: If i logged with one ip(default instance) it should show its own databases not both or named instance databases
thanks
chintala

Hi chintala,
According to your description, if you want to assign the two different IP to stand for default instance
and named instance, I recommend you set up aliases on a SQL Server with multiple instances. For example, a physical server is named WinServer and 2 instances of SQL Server named WinServer and WinServer\instance1.
We need to add 1 IP addresse to the WinServer, there is one IP address already assigned to WinServer, 192.168.1.1, by adding one new IP's, 192.168.1.2 .
We need to move into DNS to configure our host names and aliases. The physical machine must be steup as a static IP in DNS. SQLAlias1, which point to the default instance on WinServer, will be setup as a DNS with an address of 192.168.1.1.
SQLAlias2, which will point to WinServer\Instance1, will be setup as a new Host (A) record in DNS with an address of 192.168.1.2.
When everything has been completed on the DNS side, you need to open up SQL Server Configuration Manager on WinServer and configure the protocols for each instance one at a time, restart the 3 SQL services.
For more information about how to set up aliases on a SQL Server with multiple instances, you can review the similar article.
http://kevine323.blogspot.com/2013/08/setting-up-aliases-on-sql-server-with.html
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

Raw device owners change after reboot the server

The raw device owner change after reboot the server. i have to adjust it manually like
chown oracle:oinstall /dev/raw/raw*
any idea to make it permanent after bouncing the Server?
MY OS is RHEL4 & Rdbms 10.2.0.1

I got my answer .
New to Linex. Need suggestions...
How i can create new file ? like i want to create file oracle.permission
should i use this command
touch <filename> or any other command?
second i want to put these entries raw device 3, 6,7,10,11 etc
shoud it work ? like in the oracle.permission directory?
# ASM
raw/raw[3671011]:oracle:dba:0660

Upload an excel file in the server with a background job

I am trying to upload an excel file in the server, but i only can upload flat files, i can upload files in local with the function ALSM_EXCEL_TO_INTERNAL_TABLE, can i use this function reading an excel file in the server, or is there another possibility of uploadinging an excel file in the server with a background job ?
thanks in advance

Hi
First read the file from the server to some temporary place at presentation layer and then open it. And if required, save it to the server afterwards. To read/write files to application server you can use:
1. Statements "OPEN DATASET/CLOSE DATASET".
2. There are some FMs for server file operations, like "C13Z_FILE_UPLOAD_BINARY" and "C13Z_FILE_DOWNLOAD_BINARY".
*--Serdar

Lumira Login Error "Check the Server Name and Instance ID"

Dear Experts
I installed Lumira Desktop and was able to connect to the
HANA Server.
Later while I was working the software hanged and I had to
shut it down.
Now, after re-opening the software I receive error "Check the Server Name and Instance ID"
(though the server credentials are same as error and correct”
Any suggests on how to rectify

I wonder if one of the following KBAs may give you a clue?
1995325 - Error HDB 11009: The dataset could not be published to SAP Lumira Server because publishing to the SAP HANA layer failed. Lumira Server
2134259 - Lumira LaunchPad Logon Hangs
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow me on Twitter (#SAPLumira)
Got Enhancement ideas? Use the SAP Idea Place

Stress the server with Primavera P6 EPPM 8.3

Hello Good Day
I need a tool or program that allows me to connect to Primavera P6 EPPM and perform certain tasks and then execute those tasks in parallel to stress the server with Primavera P6 EPPM tasks
Does anyone know any?
Can you help please?
Thank you

Hi Everybody:
This appears to be a frustrating issue...
I am on the latest and greatest... FF21 and JRE1.7_r21 and I am having the exact same issues... can someone prescribe a JRE + Browser combo that will work in the resources page?
Thanks,
Eric

How do i leave a copy off sent emails on the server with mac mail

How do i leave a copy off sent emails on the server with mac mail.
Pop account

Check your mail preferences. The example below is from the mail app that comes with mac. In my case I'm using yahoo mail which is a POP3 account. POP stands for post office protocol which is the set of rules used by a POP mail account to transfer mail. You can learn more about it here if interested. If the box below is checked, all the mail will be downloaded to your computer when you check your mail using the built in mail app and removed from the mail server. Here is another page to help you set up your hotmail account for use the the mac mail application. Hope this clears things up.

After rebooting the server, SpamAssassin's recognition rate went worse

Always when I'm in need to restart the server, the spam recognition rate of SpamAssassin wents worse and many UCE mails are going through.
Does somebody has an idea why this happens and what can be done to solve this issue ? I investigated in many directions by myself, but haven't found a solution yet.

Hi Pavan,
When you uncheck the .NET Framework 4.5 checkbox in the Remove Roles/Features Wizard of Server Manager, Windows will check all roles/features that may also be installed as it would need to be removed as well.
In this case, please follow these steps:
1. Run the below commands in the Server Core’s command prompt window to help you recover:
DISM.exe /online /enable-feature /all /featurename:NetFx4
DISM.exe /online /enable-feature /all /featurename:MicrosoftWindowsPowerShell
2. The above commands will re-install .Net 4.0 and PowerShell on the server. Once PowerShell is installed, you can add the Graphical Shell (Windows Explorer) using the following command:
Install-WindowsFeature Server-Gui-Shell, Server-Gui-Mgmt-Infra
3. Once the GUI Shell is installed, you will need to restart the server with the following command:
Restart-Computer
Refer to:
Removing .NET Framework 4.5/4.5.1 removes Windows 2012/2012R2 UI and other features
If there is anything else regarding this issue, please feel free to post back.
Best Regards,
Anna Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Reg:: Create a New SharePoint 2010 server as the existing SharePoint 2010 Server with Named Instance

Hi Techys,
Please give me the better option for the below scenario.
Scenario::
I would like to Build a new sharepoint server with recently created MS-Sqlserver2008r2 named instance. and also I want the same data(Features and solutions) which i used in previous SharePoint farm.
Desc:: We have a SharePoint 2010 farm with SP2. MSSQLSERVER is the default instance.
now i want create a same SharePoint 2010 farm with MSSQLSERVER2(Named Instance)
If you need any Information, plz let me know.
Many Thanks,
Madhu

reproducing environments is difficult... lots of settings... the AVAILABILITY of OUT OF THE BOX features can be configured just by running the install and using a key to match editions (std/ent)... but which features are enabled, how they're configured,
what customizations might be in place... not a simple checklist.
Scott Brickey
MCTS, MCPD, MCITP
www.sbrickey.com
Strategic Data Systems - for all your SharePoint needs

Disk " disk " does not exist or is not instantiated after reboot the server

Hi,
I have one issue with 11gR2 cluster. I have 2 node cluster on CentOS 5.5. I am using HP MSA 1000 storage LUNs and create disk group and volume for RAC setup in openfiler.
The whole setup was running fine but before few days some one has recreate the database [clusterDB] using control file. I can see this from alter.log file of "oracle" user. And somehow one node is not able to up and running.
I have no idea what is going on so just restart both the nodes and storage one by one.
After restarting I can not view my ASM disk from /usr/sbin/oracleasm listdisks.
EvenI can not see the ASMdisk from /dev/oracleasm/disks... also I try to querydisk it showing that "Disk "<diskname>" does not exist or is not instantiated"
From the master node I can see the cluster registry configuration through "ocrcheck -config"
*./ocrcheck -config*
Oracle Cluster Registry configuration is :
Device/File Name : +ACFSDG
from the slave when I run the ocrcheck ...it gives error
PROT-602: Failed to retrieve data from the cluster registry
PROC-26: Error while accessing the physical storage ASM error [SLOS: cat=8, opn=kgfolclcpi1, dep=210, loc=kgfokge
AMDU-00210: No disks found in diskgroup ACFSDG
AMDU-00210: No disks found in diskgroup ACFSDG
] [8]
Any idea what is the cause behind this? There are many errors in $GRID_HOME/log/<hostname>.log file and other referring file. I might be sure that until I enable the ASMDISK/detect the ASMDISK I can not start crs...
Shall I try with restore operation of OCR or replace option in ./ocrcheck...will it usefull?
Let me know if you have already face this issue.
Thanks...
Edited by: user12039625 on Nov 12, 2010 5:30 AM
Edited by: user12039625 on Nov 12, 2010 5:36 AM

Hi,
Thanks for your reply.
I have "/dev/sd*" in my both the RAC nodes and on storage machine it was showing as "/dev/dm-*" whenever I run " fdisk -l " command... and I did this through iscsi initiatior and target and also create "Create Persistent Local SCSI Device Names ".
I also create one script "iscsidev.sh" in /etc/udev and it was perfectly working. Before this issue I was restarted the server and confirm it.
script is below
==============
# FILE: /etc/udev/scripts/iscsidev.sh
BUS=${1}
HOST=${BUS%%:*}
[ -e /sys/class/iscsi_host ] || exit 1
file="/sys/class/iscsi_host/host${HOST}/device/session*/iscsi_session*/targetname"
target_name=$(cat ${file})
# This is not an open-scsi drive
if [ -z "${target_name}" ]; then
exit 1
fi
# Check if QNAP drive
check_qnap_target_name=${target_name%%:*}
if [ $check_qnap_target_name = "iqn.2004-04.com.qnap" ]; then
target_name=`echo "${target_name%.*}"`
fi
echo "${target_name##*.}"
==============
Thanks...
Edited by: user12039625 on Nov 12, 2010 6:04 AM

Migrating Non ASM, Non RMAN to New Server with ASM and RMAN - Possible?

We currently have a database ( Oracle 10g R1 ) on a Sun Solaris server that is NOT using ASM or RMAN. The database is about 300GB. We are getting a new server and we want to install Oracle 10g R2 with ASM and RMAN and migrate the database.
I have seen the documentation on migrating non ASM to an ASM server but the methods all use RMAN. Is it possible to migrate to an ASM database without using RMAN? Would datapump import/export work if I created a new database on the new server with all the same tablespaces? Or, do I have to bite the bullet, install RMAN on the old server and do the backup?
Thanks.

If you're not using RMAN that doesn't mean you can't use it to perform a single backup, rman is contained in every oracle RDBMS installation version 10G or higher.
this is only a sample of how to do it
RMAN> CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT '<file_system_path>/%U.DBF';
--first we allocate the channel default channel.
RMAN>RUN
ALLOCATE CHANNEL DEFAULTCHANNEL TYPE DISK;
SHUTDOWN IMMEDIATE;
STARTUP MOUNT;
BACKUP DATABASE;
SHUTDOWN
}then once you have it, you can do what you want.
It should also be possible to manually restore the database from the original datafiles but it's better to follow the solution involving RMAN.
Bye Alessandro

Swapping the server in ASM.

Hi All
We are going to upgrade our sun servers from v40z to x4600.We are using ASM for our database.
We are doing the server migration on our test system.
We are copying the binaries from old server to new server all other associated files /var/opt/oracle* etc and attached the storage to new server.
After attaching storage.We are able to see 6 disks out of 8 disk in ASM instance on new server.
All the permisisons are set to oracle:dba 660 and still we are not able to see remaining 2 disks.
I tried setting asm_diskstring parameter also but no luck
Any idea what could be other reason for the disks not showing up in v$asm_disk?
Any help will be highly appreciated.
thansk
Mehtab

Is this RAC or Single Instance ?
what OS are you running (I assume Linux) are you using asmlib ?
If RAC is it the same 2 disks on all nodes ?
are the disks the first / last disks in the list or just the same 2 random disks
and you say the output from an ls -l /dev/sd* shows all permissions are OK ?
and the "SQL> SHOW PARAMETER diskstring" shows the correct disk string ?
and the number and deice name of the disks have not changed between the machine upgrades ?
Philip...

Standalone server with ASM & database, oracle HAS service not auto start

WE have a standalone oracle and grid on linux redhat 5. Oracle version is 11gr2, and I noticed everytime server reboot, the d.bin processes are all gone and has services are not automatically rebooted during server reboot.
How to handle this issue?
Thanks in advance.

You said:
>
That's not what HAS is for. HAS will restore the services to the state they were if an incident happens that aborts a service. It will not startup your database/ASM when the server reboots. Thats what the famous dbora script is for.
>
Yes it is. Not only will ohasd try to restart failed resources, but it will also (unless disabled) start them in the proper order when the node boots.
I am sorry, but your statement is wrong.
From http://docs.oracle.com/cd/E11882_01/server.112/e25494/restart001.htm#ADMIN12709
>
Oracle Restart improves the availability of your Oracle database. When you install Oracle Restart, various Oracle components can be automatically restarted after a hardware or software failure or whenever your database host computer restarts.
>
Kind regards
Uwe Hesse
http://uhesse.wordpress.com

Rebooting the server with ASM instance............

Similar Messages

Maybe you are looking for