Receipients missing in Message type ACPJMM ( message B1003)
HI experts,
I'm getting a strange error while i try to post a goods receipt or goods issue. the message says
receipients missing in Message type ACPJMM ( message B1003)
The Idoc is passed through a ALE layer and the message is assigned with three receipients, either enter the receipients or deactivate the message.
And please remember that i am a SAP MM beginner and help me with the procedure for solving this problem....
Antony
Antony:
Can you please let me know how you solved this problem?
Similar Messages
-
Receipients missing in Message type ACPJMM
HI experts,
I'm getting a strange error while i try to post a goods receipt or goods issue. the message says
receipients missing in Message type ACPJMM ( message B1003)
The Idoc is passed through a ALE layer and the message is assigned with three receipients, either enter the receipients or deactivate the message.
Antonyantony,
please check note 332523
Summary
Symptom
When you post a goods movement, invoice receipt or billing document by means of the IDocs listed below, no quantities are updated in CO. The unit of measure is not transferred as a characteristic to Profitability Analysis.
Additional key words ACLREC, ACLPAY, ACPJMM, ACLREC01, ACLPAY01, ACPJOU01
Cause and prerequisites
The flag for updating the quantity is not set.
Solution
Implement the source code corrections.
Source code corrections
regards
venkadesh -
Message no. B1003""Could not determine recipients for message type ACPJMM""
Hi All,
While posting GR in MIGO, an error is showing. I am attaching the error description.
""Could not determine recipients for message type ACPJMM""
Message no. B1003
Diagnosis
An IDoc of message type ACPJMM was passed to the ALE layer, but the three receiver fields in the header record were not filled. In this case the ALE layer tries to determine the receivers from the entries in the distribution model. There are no entries available in the distribution model for the above message type.
Procedure
Define the receivers in your distribution model for this message type or deactivate distribution for these message types.
Yesterday it was not coming and GR was getting posted.. I was doing configurations for CIN and day before yesterday everything was done,all the registers were getting updated. For that I did many customisation in SPRO. I did settings in tax ion goods monement. and in Material master to assign screen sequence for foreign trade data screen. Is any customozation triggerring IDoc? Earlier also this came, that time we got client copy, but the problem is recurring. Its very urgent as we are going to transport SPRO settings to production.
Solutions will be rewarded.
regards
B Shar
Edited by: Ian Wong on Jul 4, 2008 4:48 PMHi
If you are not working with ALE & this message comes, then somone has mistakenly activated ALE linkages for IDoc Output in Accounting.
if you want to keep this active & go forward, you need to complete the Distribution model customizng in BD64.
Thanks & Regards
Kishore -
HI experts
I'm getting a strange error while i try to post a goods receipt or goods issue. the message says
receipients missing in Message type ACPJMM ( message B1003)
The Idoc is passed through a ALE layer and the message is assigned with three receipients, either enter the receipients or deactivate the message.
What's wrong in my system? i think this is a BASIS error. Kindly let me know the steps to correct this error.
chetanHi
it seems someone activated automatic IDoc sending with goods reciept data based on it's posting.
we can de-actiavte that. but best thing is to send a mail to all asking to check their setting once.. explaining the problem you are facing.... -
Hi
I'm getting an error while i try to post a goods receipt or goods issue. the message says
receipients missing in Message type ACPJMM ( message B1003)
The Idoc is passed through a ALE layer and the message is assigned with three receipients, either enter the receipients or deactivate the message.
An IDoc of message type ACPJMM was passed to the ALE layer, but the three receiver fields in the header record were not filled. In this case the ALE layer tries to determine the receivers from the entries in the distribution model. There are no entries available in the distribution model for the above message type
pls help me in solving. rewards assured
regards
B Sharhi try this
Step 1
In sale check the logical system is there or not
If not create logical system
Step2
Go to bd64 and add message type acpjmm for the inbound and outbound in the distribution model
For acpjmm u have to give sender and receiver logical sys
Give the sender and receiver as u set in SALE
And save
Step3
plz maintain inbound entry for sender and outbound entry for receiver(specified in distribution channel) in t code WE20
this will be in LS system(logical system)
note before proceeding plz consult ur basis consultant
if it will not work then change sender and receiver logical systems -
Could not determine recipients for message type ACPJMM
Dear Experts,
while i am trying PGI getting error message " Could not determine recipients for message type ACPJMM'
Kindly let me know wt is the reason and where i should changes for getting clear?
Thanks in advance
ishikeshHi Ishikesh,
If you want to deactivate this goto SM30, enter the table TRWCA, deactivate the component
RWEX - Idoc Output, External Accounting.
this should solve your problem.
refer following links
[Message type ACPJMM;
[Message no. B1003""Could not determine recipients for message type ACPJMM"";
[MIGO and MIRO Problum;
Regards,
Karthik -
Error In MIGO "Could not determine recipients for message type ACPJMM"
Dear all,
At the time of transaction Goods Receipt(MIGO), I am getting the error message "Could not determine recipients for message type ACPJMM".
System Diagnosis is as below
An IDoc of message type ACPJMM was passed to the ALE layer, but the three receiver fields in the header record were not filled. In this case the ALE layer tries to determine the receivers from the entries in the distribution model. There are no entries available in the distribution model for the above message type
I have check the ALE Settings in we20 and we21
and have assigned the following message types under Logical syste Partner Type
Outbound
ACPJMM
MATMAS
MBGMCR
RSINFO
RSSEND
WHSORD
Inbound
ACPJMM
DEBMAS
FTDABA
FTDACO
FTDACU
INSPECTIONPLAN_CREATE
MATMAS
MBGMCR
RSRQST
WHSCON
I have also created and Assigned a Logical System to the client and have also created a RFC with the same name
I have checked all settings is SALE and they are Fine.
This is a single system
Please help this is really ugrent
Regards
Suhail JohnHi,
Goto table TRWCA (T Code SE30) and deselect all the checked entries.
This should solve your problem.
Regards,
Priyadarshi -
Need of datatype, message type and message interface
hai
can any one tell me..
why we need three level heirarchy for a message in XI
regards,
MadhavHi Madhav,
let us recall them by their name and identify their roll.
Data type : suppose that you want to form a message but that comprises of many different types of data . as in numeric, string, characters.So at bottom you will have to define datatype.
Message Type: having defined data type now you want to form a meaningful message and that message can be formed by combining many such different data types in to one message type.
Message interface : No you have created message type but now that you want to use it some where, then you will have to interface it. So you will hace to define a message interface.
Vishal
Please reward with points for useful Help -
IDOC message type and message code and function?
Hai...
anyone can explain with example what is IDOC message type and message code and function? how it is used?
regards,
prabakaranHi
An IDoc type can be implemented for various "logical" messages; one message can also be assigned to different IDoc types (m:n relationship).
The message is defined by the values for message type (required), message code (optional) and message function (optional). These three fields belong to the key fields in the partner profiles, which are used, for example, to determine inbound processing. If the 'Message type' field is not maintained (e.g. in the case of a control record from Release 2.1, in which MESTYP did not exist), the IDoc Interface uses the value from STDMES (EDI message type).
If possible, the descriptions of the message type should be linked to the corresponding EDI message type.
The message ORDERS (= message type) identifies purchase orders (outbound) and sales orders (inbound).
Message code or Process Code for Inbound Processing
Code which identifies a process type.
The process type determines which process is used to convert an IDoc to an SAP document.
Process code for outbound processing
Code which identifies the type of data which is to be sent via the IDoc interface.
Using the process code, the IDoc interface finds the application selection module which converts the SAP document into an IDoc.
The process code is only used with applications which perform outbound processing via Message Control (NAST).
Thanks & Regards
Kishore -
Notification of S1INVEXC (message Type) IDOC Message using Workflow
I have to build a Workflow for Notifying the IDOC details to a particular SAP user defined in the Partner Functions of SPEC2K. The Workflow should trigger as soon as the IDOC message of type S1INVEXC is recieved as Inbound process in the SAP.
How to go about, which Business object should be used? and what's the event which is invoked as the IDOC, is recieved.. Please give me brief details of starting this Workflow.
Can any one please give the Estimated duration for building this Workflow...
Message was edited by:
MANJUNATHA KSFollowing steps would help you.
1. Create a new process code, and point the process code to the workflow using transaction WE42
2. Partner profile for the inbound message, use the new proces code.
hope it help.
regards
johnson zavier -
What is the message types(cross applications) for postgoods issue(outboun)
Hi ,
please provide what is the messagetypes for POST GOODS ISSUE(OUTBOUND)
AND GOODS RECEIPT(INBOUND).
Thanks,
sriiiHi,
Message type ACPJMM ( message B1003)
Refer the following post.
Outbound IDOC for goods movement
Regards,
Jagadish -
Error - Could not determine recipients for message type ACP JMM
Hi Guru's
I am facing a problem while doing goods receipt(migo), "Could not determine recipients for message type ACPJMM".
Right answer will be rewarded
Regardshi
If you want to deactivate this goto SM30, enter the table TRWCA, deactivate the component
RWEX - Idoc Output, External Accounting.
this should solve your problem.
refer following links
Message type ACPJMM
Message no. B1003""Could not determine recipients for message type ACPJMM""
MIGO and MIRO Problum
regards
kunal
Edited by: kunal ingale on Sep 2, 2008 11:46 AM -
Could not determine recipients for message type HRMD_B
Hi,
I am getting below Error in SRM when transferring Org Structure data from HCM system to SRM system in a Idoc. I am using Message type HRMD_ABA and not HRMD_B. I didn't maintain Distribution model for HRMD_B. But in my IDOC status I am seeing below error message for Message type HRMD_ABA Inbound to SRM.
Only I am seeing HRMD_B message type in transactions WE81 and WE82.
Any idea? I appreciate your help.
Could not determine recipients for message type HRMD_B
Message no. B1003
Diagnosis
An IDoc of message type HRMD_B was passed to the ALE layer, but the three receiver fields in the header record were not filled. In this case the ALE layer tries to determine the receivers from the entries in the distribution model. There are no entries available in the distribution model for the above message type.
Procedure
Define the receivers in your distribution model for this message type or deactivate distribution for these message types.
Thanks,
ShearsHi Shears
Did you find soulution to your issue ??
thanks
Anup -
Workflow Ends in Error " No auth to send IDocs with message type ORDRSP"
Hello All,
I have created an RFC user with limited Authoprizations including WE* tciodes and a few ME* transactons for an ALE Set up. I want to make sure i would not be giving more authorizations (extensive) to this RFC user and assign Just required authorizations. So i started testing testing and the inbound IDOC ended in error with a message " No auth to send IDocs with message type ORDRSP" Message no. SR053. Is there any way to find out what is the missing authorization object for the User. Any inputs would be really apprecaited.
Br,
SriHi !
Becaus alle this happens in beckgound, things are a bit difficult but solvable....
What you should do is a "Authority trace" ... as follows....:
- Go to the ST01
- Mark "Authorisation Check"
- Swich the trace on for your Workflow user
- Execute the Workflow until the error uccurs
- Go back to the ST01
- Press the "Analyze" button and see what error occurs
Dont forget to swicht the trace off... otherwise the tracefiles become realle BIG !
Regards
rainer
Some Reward poins would be nice if that helped.... -
Problem Assing Message Type to RFQ
Hello.
When I create an RFQ, and then I assing Output type NEU to print, the system create the RFQ without the Output type.
Basically create the RFQ without Output type, like if a never tried before.
I reviewed my configuration and Output Type NEU is assigned to RFQ. I think is maybe I miss some security parameter.
Please I appreciate any help.
Regards,
Hectorcheck the following config
SPRO-MM-Purchasing--Messages-Form-Assign for and output program for RFQ,
SPRO-MM-Purchasing--Messages-output comtrol-message type-define message type for RFQ
Messate determination schema for RFQ
and MN01
the above config and MN01 has to be maintained to have this for RFQ.
Than check security (authorization) using tcode SU53 in ME41 tcode
Maybe you are looking for
-
Previewing Transients in Loops?
Hi there, I've got two questions regarding transients in Apple Loops. If I create an Apple Loop from an audio sample I have, the transients differ in the Logic Sample Editor to how they are when I open the loop in Apple Loops Util. For example, let's
-
Close Internet Explorer after a network error
Hello. When I'm running a Form I get the error FRM-92102, and the Form closes. But the Internet Explorer window doesn't close. What can I do for the Explorer window closes? Thank you. P.D. Sorry for my English
-
How do I remove the DRM-Protection from tracks so that I can play them on my DJay 2 app. I've followed the directions for removal and it's not working... Will I have to purchase these tracks again?
-
My system shuts down when i ask it to sleep.. Help??!!
I have The operating system Windows 8.1. When i close the laptop or ask it to sleep it closes without a problem. On restart all the programs i had open are closed and it reboots as if i shut the laptop down rather than asked it to sleep. I'm doing my
-
How to delete on the go playlist
Windows XP Pro