Receipients missing in Message type ACPJMM

HI experts,
I'm getting a strange error while i try to post a goods receipt or goods issue. the message says
receipients missing in Message type ACPJMM ( message B1003)
The Idoc is passed through a ALE layer and the message is assigned with three receipients, either enter the receipients or deactivate the message.
Antony

antony,
please check note 332523
Summary
Symptom
When you post a goods movement, invoice receipt or billing document by means of the IDocs listed below, no quantities are updated in CO. The unit of measure is not transferred as a characteristic to Profitability Analysis.
Additional key words ACLREC, ACLPAY, ACPJMM, ACLREC01, ACLPAY01, ACPJOU01
Cause and prerequisites
The flag for updating the quantity is not set.
Solution
Implement the source code corrections.
Source code corrections
regards
venkadesh

Similar Messages

Receipients missing in Message type ACPJMM ( message B1003)

HI experts,
I'm getting a strange error while i try to post a goods receipt or goods issue. the message says
receipients missing in Message type ACPJMM ( message B1003)
The Idoc is passed through a ALE layer and the message is assigned with three receipients, either enter the receipients or deactivate the message.
And please remember that i am a SAP MM beginner and help me with the procedure for solving this problem....
Antony

Antony:
Can you please let me know how you solved this problem?

Message type ACPJMM error

HI experts
I'm getting a strange error while i try to post a goods receipt or goods issue. the message says
receipients missing in Message type ACPJMM ( message B1003)
The Idoc is passed through a ALE layer and the message is assigned with three receipients, either enter the receipients or deactivate the message.
What's wrong in my system? i think this is a BASIS error. Kindly let me know the steps to correct this error.
chetan

Hi
it seems someone activated automatic IDoc sending with goods reciept data based on it's posting.
we can de-actiavte that. but best thing is to send a mail to all asking to check their setting once.. explaining the problem you are facing....

Message type ACPJMM

Hi
I'm getting an error while i try to post a goods receipt or goods issue. the message says
receipients missing in Message type ACPJMM ( message B1003)
The Idoc is passed through a ALE layer and the message is assigned with three receipients, either enter the receipients or deactivate the message.
An IDoc of message type ACPJMM was passed to the ALE layer, but the three receiver fields in the header record were not filled. In this case the ALE layer tries to determine the receivers from the entries in the distribution model. There are no entries available in the distribution model for the above message type
pls help me in solving. rewards assured
regards
B Shar

hi try this
Step 1
In sale check the logical system is there or not
If not create logical system
Step2
Go to bd64 and add message type acpjmm for the inbound and outbound in the distribution model
For acpjmm u have to give sender and receiver logical sys
Give the sender and receiver as u set in SALE
And save
Step3
plz maintain inbound entry for sender and outbound entry for receiver(specified in distribution channel) in t code WE20
this will be in LS system(logical system)
note before proceeding plz consult ur basis consultant
if it will not work then change sender and receiver logical systems

Message no. B1003""Could not determine recipients for message type ACPJMM""

Hi All,
While posting GR in MIGO, an error is showing. I am attaching the error description.
""Could not determine recipients for message type ACPJMM""
Message no. B1003
Diagnosis
An IDoc of message type ACPJMM was passed to the ALE layer, but the three receiver fields in the header record were not filled. In this case the ALE layer tries to determine the receivers from the entries in the distribution model. There are no entries available in the distribution model for the above message type.
Procedure
Define the receivers in your distribution model for this message type or deactivate distribution for these message types.
Yesterday it was not coming and GR was getting posted.. I was doing configurations for CIN and day before yesterday everything was done,all the registers were getting updated. For that I did many customisation in SPRO. I did settings in tax ion goods monement. and in Material master to assign screen sequence for foreign trade data screen. Is any customozation triggerring IDoc? Earlier also this came, that time we got client copy, but the problem is recurring. Its very urgent as we are going to transport SPRO settings to production.
Solutions will be rewarded.
regards
B Shar
Edited by: Ian Wong on Jul 4, 2008 4:48 PM

Hi
If you are not working with ALE & this message comes, then somone has mistakenly activated ALE linkages for IDoc Output in Accounting.
if you want to keep this active & go forward, you need to complete the Distribution model customizng in BD64.
Thanks & Regards
Kishore

Error In MIGO "Could not determine recipients for message type ACPJMM"

Dear all,
At the time of transaction Goods Receipt(MIGO), I am getting the error message "Could not determine recipients for message type ACPJMM".
System Diagnosis is as below
An IDoc of message type ACPJMM was passed to the ALE layer, but the three receiver fields in the header record were not filled. In this case the ALE layer tries to determine the receivers from the entries in the distribution model. There are no entries available in the distribution model for the above message type
I have check the ALE Settings in we20 and we21
and have assigned the following message types under Logical syste Partner Type
Outbound
ACPJMM
MATMAS
MBGMCR
RSINFO
RSSEND
WHSORD
Inbound
ACPJMM
DEBMAS
FTDABA
FTDACO
FTDACU
INSPECTIONPLAN_CREATE
MATMAS
MBGMCR
RSRQST
WHSCON
I have also created and Assigned a Logical System to the client and have also created a RFC with the same name
I have checked all settings is SALE and they are Fine.
This is a single system
Please help this is really ugrent
Regards
Suhail John

Hi,
Goto table TRWCA (T Code SE30) and deselect all the checked entries.
This should solve your problem.
Regards,
Priyadarshi

Could not determine recipients for message type ACPJMM

Dear Experts,
while i am trying PGI getting error message " Could not determine recipients for message type ACPJMM'
Kindly let me know wt is the reason and where i should changes for getting clear?
Thanks in advance
ishikesh

Hi Ishikesh,
If you want to deactivate this goto SM30, enter the table TRWCA, deactivate the component
RWEX - Idoc Output, External Accounting.
this should solve your problem.
refer following links
[Message type ACPJMM;
[Message no. B1003""Could not determine recipients for message type ACPJMM"";
[MIGO and MIRO Problum;
Regards,
Karthik

What is the message types(cross applications) for postgoods issue(outboun)

Hi ,
please provide what is the messagetypes for POST GOODS ISSUE(OUTBOUND)
AND GOODS RECEIPT(INBOUND).
Thanks,
sriii

Hi,
Message type ACPJMM ( message B1003)
Refer the following post.
Outbound IDOC for goods movement
Regards,
Jagadish

Error - Could not determine recipients for message type ACP JMM

Hi Guru's
I am facing a problem while doing goods receipt(migo), "Could not determine recipients for message type ACPJMM".
Right answer will be rewarded
Regards

hi
If you want to deactivate this goto SM30, enter the table TRWCA, deactivate the component
RWEX - Idoc Output, External Accounting.
this should solve your problem.
refer following links
Message type ACPJMM
Message no. B1003""Could not determine recipients for message type ACPJMM""
MIGO and MIRO Problum
regards
kunal
Edited by: kunal ingale on Sep 2, 2008 11:46 AM

Media Missing in Live Type File Error Message

So I just upgraded to FCE 3.5 and have been playing around with LIve Type.
Yesterday I succeeded in making some titles with textured backgrounds etc. and getting them into FC. Today, I can still make the titles in Live Type, but when I import them into FC I get this message, in front of a purplish background, on the icon in the FC browser and when I drag the thumbnail into the viewer.
Media Missing in LIve Type File.
I have gone into project properties in Live Type and checked the "render background" box. I have also moved my media sequences above the background divider in the time line.
Nothing shows up in FCE, not even my text. But if I do a title with only text it shows up. If I include a texture and some effects, it does not show up. I just tried it with effects only and they show up. So it appears that it is a texture media problem. As soon as I open the text/effect title and add a texture, it comes up with this error in FCE.
My files for live type are on an external hard drive. it mounts fine. I can see all my titles fine in Live Type. They render fine. But don't show up in FCE.
I am working on a MacBook.
Any help?

When I Render it it shows up, but only for a few seconds then it goes black for a few more seconds. This happens when I have my in and out points set in LT and check, render only between in and out points, it also happens when this box is not checked. So I don't get the full time of my title effect.
My problem is that I didn't have to render before, why do I have to go to the trouble to render now?
I don't have to render on my iMac, it just works there. No rendering or exporting required. ?
Dan

Segment E1EEDPO4 is missing in outbod message type ORDERS05

Hi Gurus,
When I create an Output type for PO using Message type ORDERS05, the segments E1EDP04 is missing in data records. Eventually this segment should carry the tax information. The tax information is very much appeared in Po and it is missing in IDOC. what should I do to make this segment appear in outbound IDOC data records.
Please mention the T codes and steps.
Thanks and regards
Rohini kumar

Hi,
You can use user exits EXIT_SAPLEINM_002 to populate segment E1EDP04 for outbound IDoc ORDERS05.
This segment is not populated in standard FM IDOC_OUTPUT_ORDERS.
Regards,
Ferry Lianto

IDOC Segment missing for MATMASS Message type

Through change pointer program for the message type YAUIHUBMATMAS IDOC is triggered.
1) Change pointers are defined in system for the message type T Code u2013 BD52.
2) If respective field is changed in material master , this data is stored in change pointers table BDCP.
3) Background jobs are scheduled every day, which searches for the changes pointer table and triggers the idoc.
In our case IDOC is getting generated but with one segment missing.
We have analysed the succesful and failed IDOC and found desrepency is field updation of BDCP table.
Succesful case contain material number in object value of ZZMDST field where as failed contain some other value.
Can anyone please help us to guide how the BDCP table is updated and the values are mapped in it or any other suggestion to find why the segment is missing in it.
Regards,
Roshni.

Jürgen L. wrote:
> I have never seen a YAUIHUBMATMAS IDOC, nor a ZZMDST field .
> This seems to be home made.
>
> You are expecting that standard SAP programs are generating change pointers for your z-fields?
> Do you see a change history in material master for your z-field?
>
>
> follow the slution from this thread:
>
Yes ,This is a Z -field.
Change pointer is triggering the idoc fo this Z-field but in some cases one segment is missing .
This is z-field in the basic data view of material master.
Yes , we have checked the change history in material master for this field it is getting updated there in BDCP table as well but in BDCP table if this field is flagged then object value is not contain material number instead it contain some other number .
But in case of succesful IDOC the object value is same as material number.
Regards,
Roshni

Standard Message Type Missing in XI!!!

Hi,
We have installed XI server and its working fine.
when we try to execute the Idoc scenario, in import parameter details, we have given only the XI Server details which we have installed.
When we try to import the IDOC ,the Standard IDOC's like CREMAS MATMAS ARTMAS DEBMAS are not shown.
i just want to know..
1)Is this standard Message type will be present only in R/3 system?
2) In case, if we want to configure for these standard message types, what are the steps to be followed in XI server?
waiting for the reply..
regards,
Sujata

hi shabarish,
yeah i know that we have to specify the SAP r/3 system.
In case if i give the details of XI server instead of SAP R/3 system details in import parameter details,is it possible to import the Standard IDOC's say MATMAS,CREMAS etc..??
this is my question..
regards
Sujata

IDOC Message type for open sales orders

Hi
We are trying to send the list of open sales orders of a customer in an IDOC to the customer. For example, if the customer has got 15 sales order to be delivered to him , he needs the details of all these 15 orders in an single IDOC
Is there any message type available for this in SAP R/3 4.7 version
Regards
Anandh

Try VA05 schedule lines standar variant...include status fields and both ordered qty and confirmed qty. In SAP standard system order status, status A means open orders fully (Nothing shipped, everything opened). Status B means in process orders (Partially processed - shipped). Status C means complete orders (Nothing opened). As there is no delivered qty in VA05, you need to download to excel the file and calculate the difference between both qty fields for each A and B status. That is a way to get the missing qty to be delivered or open qty as you stated.
Hope it helps.
Jorge Fernandez

When syncing iPod the PC lost power. once power restored synced iPod but the sleeve detail has been blanked. Also when syncing a 'miss-match' message is reported on iTunes. how do I get the sleeve detail back onto iPod?

When syncing iPod the PC lost power. once power restored synced iPod but the sleeve detail has been blanked. Also when syncing a 'miss-match' message is reported on iTunes. how do I get the sleeve detail back onto iPod?

http://ww2.cs.fsu.edu/~rosentha/linux/2.6.26.5/docs/DocBook/libata/ch07.html#excatATAbusErr wrote:
ATA bus error means that data corruption occurred during transmission over ATA bus (SATA or PATA). This type of errors can be indicated by
ICRC or ABRT error as described in the section called “ATA/ATAPI device error (non-NCQ / non-CHECK CONDITION)”.
Controller-specific error completion with error information indicating transmission error.
On some controllers, command timeout. In this case, there may be a mechanism to determine that the timeout is due to transmission error.
Unknown/random errors, timeouts and all sorts of weirdities.
As described above, transmission errors can cause wide variety of symptoms ranging from device ICRC error to random device lockup, and, for many cases, there is no way to tell if an error condition is due to transmission error or not; therefore, it's necessary to employ some kind of heuristic when dealing with errors and timeouts. For example, encountering repetitive ABRT errors for known supported command is likely to indicate ATA bus error.
Once it's determined that ATA bus errors have possibly occurred, lowering ATA bus transmission speed is one of actions which may alleviate the problem.
I'd also add; make sure you have good backups when ATA errors are frequent

Receipients missing in Message type ACPJMM

Similar Messages

Maybe you are looking for