Receipt of FG in to stocks where no PP not implemented

Hi Experts
For a manufacturing industry (who has production process), we need to implement MM, SD and FICO only.
So, raw material consumption can be expensed to cost centers belong to production dept, But how to bring the finished goods (that are produced in mfg plant) in to stock? How to valuate it?
Thanks in advance
ramSiva

201 for expensing Raw Materials & 501 for bringing in Finished it will be valuated on Standard Price S, So once you do 501 system will update the Inventory with same, Since controlling is also not there, in that case you can use MR21 to update the price of Finished materials at regular interval depending upon requirement, 561 you cannot use coz 561 is normally blocked in PRD

Similar Messages

  • TS1702 I have a charge on my CC that does not track to any purchases nor do I have an email receipt.  Can anyone tell me where/how I can get this deleted (charge is from 04/08 so nearly two weeks old)?  Thanks!

    I have a charge on my CC that does not track to any purchases nor do I have an email receipt.  Can anyone tell me where/how I can get this deleted (charge is from 04/08 so nearly two weeks old)?  Thanks!

    Apple could not tell you who else might be using your credit card, so there's no point in trying to contact them. All they could discuss with you is your own iTunes Store account, and if there's nothing in your purchase history, the charges almost certainly aren't coming from there. Again, you should take this up with your bank/credit card company and report these charges as fraudulent. They probably will cancel your card and issue you a new one.
    Regards.

  • Sales order stock 110000193 000050 does not exist

    Hi Friends,
    I have a problam in Confirmation of Production order against sales order. Every time I confirm the production order system give an error message Sales order stock 110000193 000050 does not exist.
    where I check the material in mb52 transaction , the stock shows on that material.
    Please give solution .
    thanks in advance.
    Ajit Sharma

    Hi,
    It seems you have activated back flush some or all the components.
    In MTOscenario, system looks for sales order stock for all the components.
    Since sales order stock is not available with your system the message.
    Try with movement type 412E in MB1b to transfer components from U/R to sales order stock.system propmts you to give sales order number Pl. provide there & carry out transactuion.
    Then the system will pick up the stock & post.
    Regards,
    R.Brahmankar

  • Inv. Consign. - Stock category K  is not permitted for general stock search

    Hi,
    IS-Retail ECC 6.0
    Unable to select another vendor consignment inventory for the same article at TO creation. Get the following message:
    +Stock category K  is not permitted for general stock search+
    +Message no. L3727+
    +Diagnosis+
    +You have entered a stock category (special stock indicator and special stock number) during transfer order creation that is not permitted by general stock determination.+
    +Example:+
    +General stock determination only allows you to enter stock categories 'own stock' and 'consignment stock' of vendor 6411. You cannot enter special stock 'K' and special stock of (vendor) 6512+.
    Not using batch management but already applied OSS note1034907 - Picking consignment stock in Warehouse Management without success.
    Any idea?
    Thanks
    Gaetan

    There is the response back from SAP on the subject. We also faced the situation where the stock determination was done but we had no stock available for the first sorted stock in this case our own stock. We have than created a user exit to take out any 0 line item from the sort to bypass this problem and get the next stock vendor available . Hope that will help.
    Gaetan
    In the retail consignment processing the stock split is excluded during
    stock determination. That means, you have to set the stock split to 1.
    In your case, if you check the customizing settings of the stock
    determination for
    - site 1100,
    - stock determination rule Z001 and
    - stock determination groupe Z001,
    the stock split or the number of splits is 002. But, this is not
    possible in coherence with the retail consignment processing and the
    creation of a TO. We will prevent such a scenario also in the coding.
    Therefore you are not able to select another vendor for consignment. In
    this case you have to change/adjust your customizing settings for stock
    determination. Please check also the usage of an alternate stock
    determination rule.
    For further information, please check/compare also the documentation.
    Customizing documentation:
    When stock determination is activated, the stock split is excluded
    during stock determination, which means you have to set the stock
    split to 1.
    Documentation in the Help Portal:
    * It is not possible to make a partial delivery of a delivery item
    from both consignment stock and a company's own stock. Nor can you
    deliver an item from the consignment stock of serveral special stock
    managers.
    That means, please check/adjust your customizing settings for the stock
    determination.

  • Where clause is not being passed to the report

    I just upgraded my crystal reports from 10.0 to 11 R2. Reports were working fine in 10.0 version,
    Reports are called from vb.net (vissual studio 2005). When I was running this reports using crystal 10.0 and visual studio 2005, it was working fine, After the upgrade report runs but I am noticing that where clause is not being passed to the reports.It generates report as there is no where clause and produces multiple pages report.

    I believe you are encountering an issue documented in [this|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bip/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes.do] note.
    Ludek

  • Stock transfer PRs are not getting created in APO

    Hi,
    I have a plant-to-plant transfer is configured using special procurement type. When APO creates stock.PRs , it does not provide any numbers to PRs and they are not getting trasnfered to R3. CIF model for PIR & POs are running good.
    In CIF post processing these PRs as stuck and  I see " Vendor master data does not exist for plant A" . There is vendor master data created for plant A in R3 and material info record also exists.
    How to de-bug this post processing queue to see what is missing in vendor master data?
    regards,
    shan

    Hi
    Can you explain in detail your scenario..you say plant A so I suppose there is plant named B in your scenario. which one is the source location and which one destination location?
    In Stock transfer from plant to plant scenario, key is to have correct settings for the system to do source determination.
    Assuming plant A as destination and plant B as source. First, The material should be maintained at both the plants.
    You need to have a purchasing info record(ME11) linking your material and the source plant B.
    I assume you are using external procurement type in your material master. Special procurement type 40 (stock transfer)should be maintained in material master.
    Then the system creates a STReq and PurReq using the source plant B. For the system to do this source determination should happen. To verify that..you can check the following...
    When you transfer the purchasing info record, system automatically generates the external procurement relationships with  source location as plant B, destination location as plant A and info record reference.
    When you transfer material master data, the system auto'lly generates transportation lanes between plant A and plant B. (keep in mind transportation lanes should be manually created here)
    So in essence you have to check if all the above things are done by the system.
    Hope Im clear in this
    regards
    Mohan V R Chunchu

  • I am having troubles, when I open LR I get a message that there is an error and it will try to fix the error next time it opens, but I get the error next time it opens, and this is going on and on where I can not use LR, any suggestions?

    I am having troubles, when I open LR I get a message that there is an error and it will try to fix the error next time it opens. LR closes on it's own, I reopen it and get that same message next time it opens, and this is going on and on where I can not use LR, any suggestions? If I click on a different set of photos in the libary before I get that message I might or might not get the message next time it oipens, but I still can not get to those photos, and it is not just one or two but most of my photos. HELP!!!!
    Thanks
    Carol

    The first thing I would suggest is for you to go to the folder containing your catalog, using your system browser. There will be a folder that has the extension .lrdata. Delete that folder, and then try to start Lightroom. If that doesn't work, replace your catalog with your most recent backup.

  • Is there an issue with Safari in Iphones and Ipads where it does not recognize option disabled="disabled" tag properly?

    Greetings everybody,
    I have run into a peculiar problem with the Safari browser on mobile platforms (IPad, IPod, IPhone) which I hope I can find a solution for in this community.
    I just launched a new website where I sell products with certain variations, for example please view this link: http://www.finerribbon.com/aegean-single-face-satin-ribbon.html
    On this particular product, the product variants are supposed to work in such a way where:
    If you select the value "1/8" from the "Choose Ribbon Width" field
    THEN
    The only options active and available to choose from in the "Choose Roll Size" field should be: 500 Yds, 20 Yds & Sample Swatch
    Now, if we browse to the above link in Safari using a desktop or a laptop, there are no problems at all, but if we browse to the above link using an IPhone or an Ipad, then we have a problem where all the options are available regardless of the values chosen, basically the above functonality does not work.
    I was told that there an issue with Safari in Iphones and Ipads where it does not recognize option disabled="disabled" tag properly, is this true? Can anyone advise me if there is a solution to this problem? I would sincerely apperciate it.
    Thank you very much for your time and help!

    Hi...
    I have run into a peculiar problem with the Safari browser on mobile platforms (IPad, IPod, IPhone) which I hope I can find a solution for in this community.
    Now, if we browse to the above link in Safari using a desktop or a laptop, there are no problems at all, but if we browse to the above link using an IPhone or an Ipad, then we have a problem
    At the top of this window you'll see the following:
    Apple Support Communities > Mac OS & System Software > Safari > Discussions
    This the Safari forum for the Mac OS X.
    Better that you post your topic here  > Developer Forums: Apple Support Communities
    I do see on my iPad what you are rreferring to. But you shoudl get the feedback you need in the developer forum.

  • There is something wrong with the volumes buttons in my macbook pro, every time i pressed the one who raises the volume, it leads me to the screen where (i do not no what its called) the background is black with the date and time and a calculator.

    There is something wrong with the volumes buttons in my macbook pro, every time i pressed the one who raises the volume, it leads me to the screen where (i do not no what its called) the background is black with the date and time and a calculator. However, when i lower it, my safari tab goes out of the screen. What do you guys think i should do? I'm getting very nervous.

    hey HAbrakian!
    You may want to try using the information in this article to adjust the behavior of your function keys to see if that resolves the behavior:
    Mac OS X: How to change the behavior of function keys
    http://support.apple.com/kb/ht3399
    Take care, and thanks for visiting the Apple Support Communities.
    -Braden

  • How can I save a page and all its component parts in a single file, like IE does as an MHT - it's much easier for mailing to people where page address not available?? (as in output from an airline booking site, for example)

    how can I save a page and all its component parts in a single file, like IE does as an MHT?
    It's much easier for mailing to people where page address not available?? (as in output from an airline booking site, for example)
    It is simply too painful to have to zip everything up into a single file to send. MHT format has been available for years now from IE, and with every new FF release it's the first thing I look for. I have been using FF for years, and hate having to come out of it, over into IE |(which I even took out of startup) and key everything in again, in order to send somebody something in a convenient format that they can open with a single click.
    I can't believe this hasn't been asked before, so have you looked at it and rejected it? Have MS kept the file format secret?
    Thanks
    MG

    This is not really an answer just my comments on your question.
    I am sure I recollect efforts being made to get mhtml to work with FF.
    Probably the important thing to remember about .mhtml is that if other browsers do support it they may need addons, and may not necessarily render the content correctly/consistently.
    There are FF addons designed for archiving webpages, you could try them, but that then assumes the recipient has the same software.
    You could simply save the page from FF to your XP pc; then offline open it with and save it using IE, before then emailing using FF, and attaching the .mht or mhtml file that you have now created on your PC.
    As an alternative method, in some cases it could be worth considering taking a screen grab of the required page, then sending that to the recipient as a single email attatchment using either a bitmap or jpeg file format for instance.
    Something such as an airline booking may be designed with a print option, possibly it could be worthwile looking at sending the print file itself as an email attachment.

  • Since updating my iphone 4s to the most recent update it will no longer connect to the wifi at work, where i am not a network  administrator. All helps for this issue instruct turning off the router/other stuff that i cant access.Suggestions?

    Since updating my iphone 4s to the most recent update it will no longer connect to the wifi at work, where I am not a network administrator and do not have privliges to reset passwords and turn the routers on and off. Any other suggestions for re-connecting? I have never had a problem before and can still connect to other networks i am a part of...

    Try Resetting your iPad: Hold down the sleep and home buttons, wait for the Apple logo, let go of the buttons.

  • Where did my note go?

    I had a note on my iPhone 4S. After I did a sync with iTunes, one note disappeared. Originally I had 3 notes, now there are only 2. I am not using iCloud simply because I don't know how. On my iPhone the iCloud says that for notes, it's on. I am using Windows 7 and Windows Mail. When i go to iCloud in the Windows control panel, it says that I have 1.4Gigs in a backup, but I have no idea how to access it. When I go to iCloud.com, there is nothing there, I have 5 Gigs available to me.
    Where did my note go and how can I retrieve it?

    i think i did. i'm totally new to the iphone so i'm probably doing something wrong (and not the phone's fault)
    hmmm, i just plugged my iphone into my imac to charge/sync it, and saw my current note vanish into the top left hand corner. so if syncing deletes the note - where does it go?
    and how can i stop this from happening? surely must be a way...
    thanks!

  • If I buy Apple TV in a country where Netflix is not available, will I be able to access Netflix from my country where Netflix is available?

    Hey guys.
    I have an urgent question.
    I'm from Argentina where Netflix is available. I have an account.
    I have a friend who is in Spain right now, where Netflix is not yet available.
    I asked him to bring me an Apple TV 3 because it is much cheaper there. And I need to access Netflix from a Non Smart LCD I have.
    And he is leaving Spain in a couple of hours.
    He went to the Madrid's Apple Store where he was told that they didn't know if he could be able to use Netflix in Argentina from the Apple TV bought in Spain.
    If you look at Apple's Spanish site for the Apple TV, you can't see Netflix in the images: http://store.apple.com/es/buy-appletv/appletv
    But you can in the US site: https://www.apple.com/appletv/
    Do you know if I'll be able to access Netflix in Argentina (where Netflix is available) from an Apple TV bought in Spain (where Netflix is not available)? Is there some kind of regional lock from Apple TV?
    Thanks.

    It should be fine provided Netflix is available on AppleTV normally in Argentina - in the Settings menus there are a couple of location/country type settings - the unit has a universal power supply and apart from potentially a plug adapter for the power cord if needed it should work fine.
    AppleTv's are not region locked at all, you should be able to get all services available on an AppleTV sold in Argentina on one sold in Spain provided you configure the location info correctly.

  • Query in the where clause is not allowed

    Hi all,
    I have a table m_vehicle that stores 1 or more than 1 rows of data for each person. But the partner's schema requires that 0 or 1 vehicle license plate data be sent with the xml file. I have the following nested select statement inside a bigger one and it does not work,
    select xmlelement("VehicleLicensePlate",
         (case when mv.lic_plate_state is not null then
              xmlelement("PlateState", mv.lic_plate_state)
         end), -- end of plate state
         (case when mv.lic_plate_no is not null then
              xmlelement("PlateNumber", xmlelement("ID", mv.lic_plate_no))
         end),
         (case when mv.lic_plate_year is not null then
              xmlelement("PlateExpiryYear", mv.lic_plate_year)                                                  
         end)
         ).extract('/*')
    from m_vehicle mv where mv.mni_id = 1083650
    and mv.seq_no = (select max(mv2.seq_no) from m_vehicle mv2
    where mv2.mni_id = mv.mni_id) and mv.lic_plate_no is not null
    But it works when I run it alone and gets the latest row for the person. It does not work either if I join this table with other tables. My root element select is from dual because I have to supply lots of SOAP and other artifacts in the xml. Is it because I have this root select from dual that the query in the where clause does not work? How do I make it work so that I get 0 or one row only from the table? My solution was to write a function that returns each part of the license plate data using dymanic sql and call it in the xmlelement function. It works but I would like to use plain sql instead.
    Thanks.
    Ben

    By the way, the error I get is this,
    ERROR:
    ORA-31011: XML parsing failed
    ORA-19202: Error occurred in XML processing
    LPX-00216: invalid character 3 (0x3)
    Error at line 1
    ORA-06512: at "SYS.XMLTYPE", line 111
    Ben

  • I can't seem to get rid of OR use Adobe Reader after I let it into Safari 7.  How do I get to the point where Reader is not my preferred anything, but can still be used if Preview won't open something?

    I can't seem to get rid of OR use Adobe Reader after I let it into Safari 7.  How do I get to the point where Reader is not my preferred anything, but can still be used if Preview won't open something?

    Back up all data before making any changes. Please take each of the following steps until the problem is resolved.
    Step 1
    If Adobe Reader or Acrobat is installed, and the problem is just that you can't print or save PDF's displayed in Safari, you may be able to do so by moving the cursor to the the bottom edge of the page, somewhere near the middle. A black toolbar should appear under the cursor. Click the printer or disk icon.
    Step 2
    There should be a setting in its preferences of the Adobe application such as Display PDF in Browser. I don't use those applications myself, so I can't be more precise. Deselect that setting, if it's selected.
    Step 3
    If you get a message such as ""Adobe Reader blocked for this website," then from the Safari menu bar, select
              Safari ▹ Preferences... ▹ Security
    and check the box marked
              Allow Plug-ins
    Then click
              Manage Website Settings...
    and make any required changes to the security settings for the Adobe PDF plugin.
    Step 4
    Triple-click anywhere in the line of text below on this page to select it, the copy the selected text to the Clipboard by pressing the key combination command-C:
    /Library/Internet Plug-ins
    In the Finder, select
              Go ▹ Go to Folder
    from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens by pressing command-V, then press return.
    From the folder that opens, move to the Trash any items that have "Adobe" or “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari.
    Step 5
    The "Silverlight" web plugin distributed by Microsoft can interfere with PDF display in Safari, so you may need to remove it, if it's present. The same goes for a plugin called "iGetter," and perhaps others—I don't have a complete list. Don't remove Silverlight if you use the "Netflix" video-streaming service.
    Step 6
    Do as in Step 4 with this line:
    ~/Library/Internet Plug-ins
    If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari.

Maybe you are looking for