Receiving a FAX or allowing PC user access to idisk file

Hello everyone,
I work with someone who uses a PC and Outlook Express and I need to be able to receive her appointment schedule in some manner. I have Verizon DSL, I followed the Help instructions to set up my ibook to receive a fax and connected a cable from the modem on the ibook to the modem connection on my power strip but when she sends me a fax my ibook doesn't recognize it and stays in idle mode. I tried to set up a place on my idisk that she could put the schedule but it puts some photos in there from another homepage that I have and I can't figure out how she can put anything there.
Any assistance would be greatly appreciated. We have resorted to snail mail arrrrrgh!!
Thanks,
Anna

I know, that would be simple but apparently Outlook Express doesn't allow her to do that. She can print it and that's why we thought setting my ibook up to receive a fax would work.
Thanks anyway,
Anna

Similar Messages

  • Way to allow the user access to the saved lists of this Z report

    We have a Z report that we want to run at midnight each Sunday and then view the output/layout first thing Monday morning. We can schedule the report to run but it appears that the only way we can save the output as a 'file' for later viewing is by using the "Save with ID" option, which puts the output into a SAP 'saved list'.
    The problem with this is that it doesn't appear to be possible to access that list from the Z-report - it would appear that you have to go into SQ01 and use the 'saved list' button. This means giving the Z- report user access to SQ01 as well as Z-report, which, for security (SOD) reasons we don't want to do.
    We can run the report in foreground with the output option "File store" and save the output as a file to a specified location,. But this option doesn't appear to be available when the report is scheduled as a background job. If this is done, the background job runs but there's no output anywhere, as far as we can tell.
    So what want is to run the report in background but with the output option 'File store' or equivalent (i.e. an output stored somewhere that the report user can view). Is this not possible, or have we missed something in setting up the report run?
    Or is there a way to allow the user access to the saved lists of this Z report without giving them T-code SQ01?
    Thanks

    Hi !
    I just wonder if the answer from Varishtb below did solve your propblem.
    I have exactly the same problem as you. I also want to be able to look at the saved list without using the sq01.
    If you solved it I will be grateful to get the solution.
    regards Lars
    answer:
    You can call the infoset query directly from a transaction code. There's
    no need to copy it as a 'Z-report' (or as a custom report). In fact,
    everytime you're copying an infoset query to a report, you're calling
    for problems the next time you face an upgrade. (That is because SAP
    changes the internal logic used to handle the infosets queries from
    version to version)
    We're using some infoset queries and they work fine this way.

  • How to allow the user to upload a file from their desktop to MII Server?

    Hi,
    Is there a way for the user to specify a file on their local computer to upload to the MII server for processing?  We have a method that works for uploading from a shared network drive, but now the need/desire is to allow the user to upload a file from their desktop.
    Ideally, this would be a file browser that the user would click on to browse their local desktop and select the file and click "Upload" but not sure what's possible?
    This is using 12.1 SP4.
    Thanks for the help.
    Kerby

    [Uploading Documents|Uploading Documents]

  • I can't get new version of itunes to install on Windows 7 64 bit computer. Receive message that reads insufficient privileges to access c:\program files\ipod\bin. Tried to follow some suggestions found here but nothing is working. Any new suggestions?

    I can't get new version of itunes to install on Windows 7 64 bit computer. Receive message that reads insufficient privileges to access c:\program files\ipod\bin. I've followed several threads I've read here but nothing is working.

    For such situation, I'd suggest the following:
    1. Remove current installed office with the fix-it tool in
    KB2739501, and follow the "Remove Office manually" section to make sure there are no remaining files
    2. Either download a trial version of Office 2013 from
    http://office.microsoft.com/, or from
    http://technet.microsoft.com/en-us/evalcenter/jj937170
    3. Reboot your computer in clean boot mode, and run setup again
    Max Meng
    TechNet Community Support

  • Allowing unauthenticated users access to gatewayed pages - problem

    Hi,
    I was trying to allow the Guest user access to a specific gatewayed page. For this, I followed the instructions posted here: [ALUI 6.1 Anonymously Access Gatewayed Page|http://forums.oracle.com/forums/thread.jspa?threadID=902777&tstart=0].
    But when I try to access that gatewayed page as guest, the portal throws a permissions exception several times in the process, followed by a redirect to the SSO.
    The curious thing about this is that the exception says that "Current User does not have sufficient permission to object with id = 2". That object is exactly the Guest user object!
    There must be something wrong in my setup, but I can't figure out what it is.
    Below is the exception. Any idea?
    6-25-2009 9:42:45.207 Warning Core ********OEL4.5.1.root [ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)' com.plumtree.server.impl.core.PTBase *** PTBase.ThrowException *** (-2147024891) Current User does not have sufficient permission to object with id = 2
    com.plumtree.server.marshalers.PTException: -2147024891 - Current User does not have sufficient permission to object with id = 2
    at com.plumtree.server.impl.core.PTBase.ThrowException(PTBase.java:86)
    at com.plumtree.server.impl.core.PTBaseObjectManager.VerifyObjectAccess(PTBaseObjectManager.java:1638)
    at com.plumtree.server.impl.core.PTBaseObjectManager.Open(PTBaseObjectManager.java:769)
    at com.plumtree.server.impl.community.CommunityInfoCacheEntry.Initialize(CommunityInfoCacheEntry.java:90)
    at com.plumtree.server.impl.community.CommunityInfoCache.InternalCreateObject(CommunityInfoCache.java:75)
    at com.plumtree.server.impl.core.PlumtreeObjectCache.FindOrCreateObjectInsecure(PlumtreeObjectCache.java:181)
    at com.plumtree.server.impl.core.PlumtreeObjectCache.FindOrCreateObjectCheckSecurity(PlumtreeObjectCache.java:223)
    at com.plumtree.server.impl.community.CommunityInfoCache.FindCommunitySecured(CommunityInfoCache.java:135)
    at com.plumtree.server.impl.community.PTCommunityInfo.GetSecuredCommunityInfoCacheObj(PTCommunityInfo.java:712)
    at com.plumtree.server.impl.community.PTCommunityInfo.<init>(PTCommunityInfo.java:61)
    at com.plumtree.server.impl.community.PTCommunityManager.CachedOpenCommunityInfo(PTCommunityManager.java:584)
    at com.plumtree.server.impl.portlet.providers.CSPPortletProvider.GetCanSetCommunity(CSPPortletProvider.java:1289)
    at com.plumtree.server.impl.portlet.providers.CSPPortletProvider.GetContentInternal(CSPPortletProvider.java:1114)
    at com.plumtree.server.impl.portlet.providers.CSPPortletProvider.GetContent(CSPPortletProvider.java:926)
    at com.plumtree.server.impl.webservice.PTGadgetGateway.GetContentInternal(PTGadgetGateway.java:318)
    at com.plumtree.server.impl.webservice.PTGadgetGateway.GetContent(PTGadgetGateway.java:352)
    at com.plumtree.portalpages.browsing.gateway.GatewayControl.CheckActionSecurityAndExecute(GatewayControl.java:264)
    at com.plumtree.uiinfrastructure.interpreter.filter.utils.GatewayHandlers.HandleGatewayRequest(GatewayHandlers.java:232)
    at com.plumtree.uiinfrastructure.interpreter.filter.GatewayFilter.PreFilter(GatewayFilter.java:54)
    at com.plumtree.uiinfrastructure.interpreter.Interpreter.DoPreFilter(Interpreter.java:1786)
    at com.plumtree.uiinfrastructure.interpreter.Interpreter.HandleRequest(Interpreter.java:234)
    at com.plumtree.uiinfrastructure.interpreter.Interpreter.DoService(Interpreter.java:155)
    at com.plumtree.uiinfrastructure.web.XPPage.service(XPPage.java:306)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
    at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:226)
    at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:124)
    at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283)
    at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
    at com.plumtree.binarygateway.BinaryGatewayFilter.doFilter(BinaryGatewayFilter.java:71)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3393)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
    at weblogic.security.service.SecurityManager.runAs(Unknown Source)
    at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2140)
    at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2046)
    at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1366)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:200)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:172 <ptLogMsgEnd>
    Thank you

    i'm not saying this is what it is...(hopefully its not), but there are certain folders that you absolutely can't remove the everyone user from... i think Plumtree is an expert on this.
    have you been 'locking down' your portal recently?

  • MobileMe Gallery - allowing multiple users access

    Hi,
    I have a simple question - can allow more than one user access to a hidden MobileMe Gallery?
    I seem to be able to choose only one name from a drop-down list. I'd like to allow two people access to my gallery. Is this possible?
    Thanks,
    :-Joe

    Joe:
    Give the same name and password to both viewers.
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
    Note: There's now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

  • Allow multiple users access to iphoto

    I would like to allow multiple users on same computer to access Iphoto files.  What setting changes need to be made?
    Thanks
    mfandml

    iPhoto: Sharing libraries among multiple users...
    http://support.apple.com/kb/HT1198

  • Allow a user access to start and stop a particular service in Solaris 11 using RBAC controls

    So, using svcbundle I created a service called "oracle" that starts and shutdown a db. I'm aware of how to grant RBAC access to be a "service operator" to be able to control start/stop ALL services. But I'd like to grant a user access to start and stop JUST this service.
    in this document on page 15, it states that it's possible to do this kind of granularity but doesn't explain how to do it step by step.
    how does one achieve this?
    thanks.

    You need to add a property group such as
    <property_group name='general' type='framework'>
      <!-- to start stop oracle -->
      <propval name='action_authorization' type='astring'
      value='solaris.smf.manage.oracle' />
    </property_group>
    Then add the solaris.smf.manage.oracle authorization to the user profile.
    As an example, see Less known Solaris features: RBAC and Privileges - Part 2: Role based access control - c0t0d0s0.org

  • Can I batch change user access to folders & file read-write permissions?

    I had a corrupted user account on my iMac and after weeks of trying repairs I followed a forum suggestion to delete my account.
    Before doing so I synced all my document folders and files (since 2004) over my LAN to an external hard drive that was attached to my MacMini. I then deleted the iMac account.
    Next I backed up my Mac Mini user account with Time Machine. I then created a new iMac User account on the iMac and let the iMac access Time Machine to bring over all my MacMini preferences, settings, desktop, etc. I now have a fully functioning iMac user account.
    Here is the problem. I attached the USB external drive directly to my iMAC. I can access some of the folders and files on the external hard drive. Most of them refuse to let me acces the folder or open a file. If I use the GET INFO command I see an "_unknown" user with "read and write". I see an "everyone" with "no access". I can individually change each folder and file to allow my user account access and give myself permission to read and write the files. I cannot delete delete the "_unknown" account.
    It will take me days to individually change each folder and file manually like I am now doing.
    Is there a way to use Automator to add my user account to the folder or file and give me read and write folder and file permissions?
    Or is there any other way to do this in a batch change?
    Is there something I need to do to the external files right now that will ensure that I can access them if either computer crashes and I need to replace the MAC? I would hate to have to go through this again. Would having a MAC server instead of an external drive solve this?
    I am using MAC OS 10.6.8 with the most recent updates installed (as of today).
    Thanks,
    Sandi Dickenson

    Select the icon of the external drive in the sidebar of a Finder window, and open the Info window. In the "Sharing & Permissions" section of the window, click the lock icon and authenticate. Make sure you have read & write access to the volume by changing the settings if necessary. Then, from the action menu (gear icon), select "Apply to enclosed items."
    The "_unknown" user and group are assigned automatically to files on a volume with the "Ignore permissions" option set.

  • Can I create a fillable PDF that allows the user to attach a file to the submitted form?

    There are suggestions in the Help documentation and on this site that indicate it is possible to attach files to a fillable PDF form that is being submitted. But I do not see any instructions for adding this functionality to a form. I am using Acrobat 9 Pro to create my form. I have a Submit button with an Action/Menu Item/Submit a form option, and the URL link for the submission is a local coldfusion file with a #FDF suffix. The export format is HTML. The form also contains a hidden EMAILTO field, with an Options/DefaultValue option identifying the recipient's email address. (I'm guessing the local cfm file uses this field.) There is also a hidden URL field in the form, and its Options/DefaultValue specifies the URL of the fillable form itself. (Perhaps the local cfm file uses this field too.)
    How can I add functionality to this form, using Adobe/PDF, to allow the user who submits the form to attach a file to the submission?

    You have to first configure a text field so it can be used for file selection. You do this on the Options tab of the field properties dialog. In order to select the corresponding check box, make sure only the "Scroll long text" option is selected.
    You then can set up a button that has the following JavaScript attached to the Mouse Up event:
    // Mouse Up script for button
    getField("upload_text_field").browseForFileToSubmit();
    Replace "upload_text_field" with the actual name of the file selection text field.

  • With iTunes on an external hard drive can I allow multiple users access?

    I keep my iTunes library on my time capsule since it is far to large to keep on my hard drive.  We have always had only one user account.  Now that my daughter is onl enough to use the computer on her own I set up her own account so that I could enact parental controls, but I noticed her iTunes is empty.  Can I have it access the library on the time capsule.  If I do this do I run the risk of her deleting files?  If I let her create her own library isn't it just a bunch of duplicate files eating up space?  Any help is greatly appreciated!  Thanks !

    PhoenixR wrote:
    If I do this do I run the risk of her deleting files?
    yes.
    If I let her create her own library isn't it just a bunch of duplicate files eating up space?
    yes, but it would be safer.

  • Allowing a user access to all calendars in his OU

    Hi Everyone.
    I have a hosted exchange environment (Meaning we have many little companies that buy mailboxes from us, and each one has its own OU under the main OU called Hosting.Local)
    One of our bigger clients has about 250 mailboxes in his OU, the CEO wants permission to view the calendars of all users in his OU.
    I was wondering, is there a way to do it with a script to grant him this access or must I really do it manually for each mailbox?
    Hoping for a quick response.

    Hi,
    We should edit the
    Get-Mailbox to get a list of all the mailboxes in your organization in that OU.
    The script should be like this:
    $allmailbox = Get-Mailbox -OrganizationalUnit “OUname” -Resultsize Unlimited
    Foreach ($Mailbox in $allmailbox)
    {Set-mailboxfolderpermission –identity ($Mailbox.alias+':\calendar’) –user Default –Accessrights AvailabilityOnly}
    Best Regards.
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
    Lynn-Li
    TechNet Community Support

  • Allowing special user to read log files [Solved]

    Hi
    I want to add a group (log) that has the privledges to read /var/log files
    and then add my user to that group.
    How do i accomplish this
    This is to run root-tail in .xinitrc
    Or is there an other way?
    //Clanman

    [root@master fredrik]# ls -al /usr/bin/root-tail
    -rwxr-xr-x  1 root root 22600 2006-01-08 04:58 /usr/bin/root-tail
    [root@master fredrik]# chmod 640 /usr/bin/root-tail
    [root@master fredrik]# ls -al /usr/bin/root-tail
    -rw-r-----  1 root root 22600 2006-01-08 04:58 /usr/bin/root-tail
    [root@master fredrik]# chgrp log /usr/bin/root-tail
    [root@master fredrik]# ls -al /usr/bin/root-tail
    -rw-r-----  1 root log 22600 2006-01-08 04:58 /usr/bin/root-tail
    exiting root
    fredrik@master ~]$ root-tail -g 800x250+10+10 -justify -fn '-*-verdana-*-*-*-*-10-*-*-*-*-*-*-*' /var/log/errors.log,orange,'ALERT'
    -bash: /usr/bin/root-tail: Permission denied
    Still no go
    //Clanman

  • Only allow the user to add simple files to a page

    I know I can restrict what items that can be added to the page at the page group level but is it possible to do it at page level?
    I'm using portal 10.1.2.
    Thanks

    Not according to the documentation. You could re-order your list of item types, placing the one(s) you want used at the top. That may reduce the number of miss-typed items placed on the page. Good luck!

  • Can multiple XP users access the same iTunes library?

    Because I'm having a REALLY hard time getting that to work at all. I've moved my entire iTunes folder into 'Shared Documents' so that all users should be able to access it and changed the option in iTunes Preferences to the correct 'all users' path, but iTunes still tries to find the info in 'my' (sal's) documents instead of 'all.'
    Anyone figure this out, or does it somehow break the EULA and isn't supported? The wife and I just want to use the same library since we're on one computer. Seems silly to not allow a user with admin rights to allow other users access.
    Thanks,
    Sal
      Windows XP  

    Sal,
    As this article in the Apple Knowledge Base explains the trick is to move the iTunes Music folder, not the entire iTunes folder, to "a publicly accessible location" and I believe they mean to suggest C:\Documents and Settings\All Users\Documents\My Music as a good place.
    It is important that the iTunes Library files remain in Sal's Documents and Sal's Wife's Documents.

Maybe you are looking for

  • Thin lines in pdf file

    Hi all! I have a question. The same problem in Illustrator CS6 (but it appears from a few version of CS back). I have document in an Illustrator. The document is generally for print, I don't using them to making website, so without using Slice tool.

  • Picing procedure determinatin ( OVKK)

    Hi Friends, In pricing procedure determination ( ovkk) screen, we maintain  one condition type beside of pricing procedure , what is the exact functionality of that condition type. Thanks inadvance Nrasimha.

  • How to change the register of an iMac

    Dear list members, I just bought an iMac 27" Late 2012 for my lab. I tried to include it in my Apple Support Profile, but the system says it has been already registered to another Apple ID. I have only two IDs (one active and one that I do not use an

  • Creating a Buffered Image to Rotate a JPanel

    I am trying to rotate a JPanel and all of its contents 90 degrees. In searching through the forums for ways to do this, I found this thread: http://forum.java.sun.com/thread.jspa?forumID=256&threadID=139832 a solution in the thread said to create a B

  • Not all ram reading in bios

    Board: MSI X58 Pro-E  (MS-7522)0 Bios: Version 8.15 VGA:   Nvidea 450 gt X2 PSU:   Raidmax rx-1200ae Intel Core i7-960 Bloomfield MEM: 6x Kingston 4gig-10600 HDD:Ozc SSD OS: Windows 7 64bit Professional Have 24 gigs of ram, bios only shows 16 gigs. C