Receiving file adapter content conversion issue

Guys,
Could someone please help me with a Receiving file adapter issue?
My output structure is something like this:
Vendor_file_MT (occurence 1)
--Recordset (occurence 0..unbounded)
Vendor (occurence 1)
Field1
Field2
Field3
Field73
Field74
My content conversion is very simple:
Recordset Structure: Vendor
Parameters:
Vendor.fieldFixedLengths   30,30,30, (...) ,1,27
Vendor.fixedLengthTooShortHandling   Cut
Vendor.endSeparator   'nl'
If I don't do the content conversion, it works fine, I get all the fields in the XML format.
When I do the content conversion however, I get multiple lines but only the very first field of each line.
What could be the problem? What am I missing here? Any idea?
Your help would be much appreciated.
Thanks,
Viktor

Varga:
Its little strange that its not working even after adding that. Did you check the receiver channel in your RWB for any logs. Add the statement in my previous post and Also try to clear the Cache and activate the channel again..See if it works
Glad it worked
Edited by: Guru on Apr 21, 2008 3:15 PM

Similar Messages

Receiver File Adapter Content Conversion Problem.

Hi All,
I am getting in receiver file adapter due to content conversion setting. Problem is that all the fields coming in file adapter are optional. In content conversion , i have specified fieldfixedlengths. So whenever any optional field is not present , it fails . How should we handle it? is there any option to declare fields as optional, I know that is the there for sender adapter. But no. of fields is also very large, so putting each and every field as optional is very time consuming.
What should i do?
Ranjeet Singh.

Hi Daniele,
Instead of using the standard funciton , i created a UDF for handling this situation.
My logic is UDF is like
 //write your code here
int Size = Integer.parseInt(Truncate_Size);
String Return_Value = "";
 if (!("".equals(Input)) )
 if (Input.length() > Size )
 Return_Value = Input.substring(0,Size);
 else
 Return_Value = Input.substring(0, Input.length());
 else
 for(int i = 0; i< Size ; i++)
 Return_Value = Return_Value + " " ;
return Return_Value;
SO in this case also , it should be able to handle empy source element. But it is not working.

Receiver File Adapter - Content Conversion

Hi,
I don't quite get this:
I have a structure
<?xml version="1.0" encoding="UTF-8"?>
<AnElement1>
 <AnElement2>
 Bla bla bla
 </AnElement2>
</AnElement1>
I want to convert this to a flat file with a line containing
Bla bla bla
In te receiver file adapter I define the following:
In the 'Content Conversion Parameters'
Recordset Structure : AnElement2
Name Value
AnElement2.addHeaderLine 0
AnElement2.fieldSeparator 'nl'
AnElement2.endSeparator 'nl'
This results in an Empty file each time indicating some error somewhere.
What am I missing?
Thanks
Andre

Hi Andre,
Just check the link <a href="http://help.sap.com/saphelp_nw04/helpdata/en/2c/181077dd7d6b4ea6a8029b20bf7e55/frameset.htm">File content conversion</a>
Also check out this web log <a href="/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2 to TXT</a>
Is there any error log shown in File adapter ?
Regards,
Keith
Message was edited by: keith thompson

Receiver File adapter content conversion using StrictXml2PlainBean

Hi All,
For receiver file adapter i am using the module StrictXml2PlainBean, and also i mentioned the module configuration like this
parameter name parameter value
recordTypes Header,TransactionHeader,TransactionDetail,TransactionTrailer,FileTrailer
FileTrailer.endSeparator |\n
FileTrailer.fieldSeparator |
Header.endSeparator |\n
Header.fieldSeparator |
TransactionDetail.endSeparator |\n
TransactionDetail.fieldSeparator |
TransactionHeader.endSeparator |\n
TransactionHeader.fieldSeparator |
TransactionTrailer.endSeparator |\n
TransactionTrailer.fieldSeparator |
But when i send the idoc, The receiver CC is throwing an error
Message processing failed. Cause: com.sap.aii.af.modules.conversion.xml2plain.ConversionException: Invalid structure name encountered during conversion: Transaction at XML element MT_DeliveryOrder,Transaction
My actual structure is
MT_DelvOrder
 Header 0...1
 Transaction 0....Unbounded
 TransactionHeader 1..1
 TransactionDetail 0...unbounded
 TransactionTrailer 1...1
 FileTrailer 0...1
The module is checking for the Transaction node,but i require the rest 3.
Same configuration i have done successfully with FCC without using the module....
So can any one suggest me where i am missing... why the module is pointint towards, the Transaction cant i ignore this node . and continue with the rest???
Regards,
Sridhar
Edited by: sridhar reddy kondam on Aug 10, 2009 12:35 AM

Hi Rajesh,
The same FCC configuration was working fine with FCC and when i am using this module configuration i am getting the prob...
In the file i need the Header,TransactionHeader,TransactionDetail,TransactionTail,Filetrailer
my sample output file is
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_DeliveryOrder>
<Header>
</Header>0...1
<Transaction>0...Unbounded
 <TransactionHeader> 1..1
 </TransactionHeader>
 <TransactionDetail> 0...Unbounded
 </TransactionDetail>
 <TransactionTrailer>1...1
 </TransactionTrailer>
</Transaction>
<FileTrailer> 0...1
</FileTrailer>
Any suggestions will be great help...
I think i need to go with other options without using this module....
Regards,
Sridhar
Edited by: sridhar reddy kondam on Aug 10, 2009 6:03 AM

Blank line in receiver file adapter content conversion

Hi,
I am using a receiver file adapter. Everything is working fine. Except that a blank line is put by the file adapter between each records. It is a flat file format.
I have used the stting below. How do we remove the blank line?
Recordset : ACCTHDR,BATCHDR,TRANSREC,BATCHTLR,FILETLR
ACCTHDR.fieldFixedLengths 1,7,4,9,8,665
ACCTHDR.absoluteRowWidth 694
ACCTHDR.addHeaderLine 0
Thanks
Sachin K

Hi,
.endSeparator
The default value is a line break (no explicit separator after the last column; instead the structures are arranged line-by-line).
If you enter a character string here, the system adds it to the last column as a closing character. You can also make this specification in addition to NameA.fieldFixedLengths. To include a line break following the closing character, you must explicitly define it by attaching ´nl´ (including the quotation marks) to the string.
Regards
Agasthuri Doss

Receiver JMS Adapter Content Conversion issue

Scenario :
R/3 -->XI -->MQ(XML2Plain)
Hi
We are using Receiver JMS Adapter to send the Message from XI to MQ.
The XML has to be converted to plain file. And Content conversion is
being done.
With the new development, the message type defined consist of 8 fields
with fixed length. The XML message goes successfully from XI to MQ
without any content conversion. But once simple content conversion is
being done for Receiver JMS adapter, even though the message is
received but its empty (without any data records). The adapter
monitoring everything seems fine and it gives the status that message
converted to binary and the message is delivered to MQ. Though on
checking the messages there is no data records.
Below is my content conversion configuration done in Module tab. Kindly
revert back what can be the problem as have done exactly the same way
as described in Content Conversion How to Guide for receiver JMS.
localejbs/AF_Modules/MessageTransformBean Local Enterprise Bean XML2Plain
localejbs/SAP XI JMS Adapter/ConvertMessageToBinary Local Enterprise Bean convert_XI2Bin
localejbs/SAP XI JMS Adapter/SendBinarytoXIJMSService Local Enterprise Bean exit
XML2Plain Transform.Class com.sap.aii.messaging.adapter.Conversion
XML2Plain TransformContentType text/plain;charset=utf-8
XML2Plain xml.addHeaderLine 0
XML2Plain xml.addHeaderLine SimpleXML2Plain
XML2Plain xml.fieldFixedLengths 8,10,10,20,40,40,8,8
XML2Plain xml.fixedLengthTooShortHandling Cut
regards.
santosh.

Hi,
check localejbs/SAP XI JMS Adapter/ConvertMessageToBinary Local Enterprise Bean convert_XI2Bin
this is not CallJMSService.
And also check the receiver Structure, if it is falt structure its ok, else
see the below link if it has the complex structure , how to handle..
See the below links
/people/alessandro.guarneri/blog/2006/01/04/jms-sender-adapter-handling-too-short-lines
/people/william.li/blog/2006/11/13/how-to-use-saps-webas-j2ees-jms-queue-in-exchange-infrastructure
content conversion
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f02d12a7-0201-0010-5780-8bfc7d12f891
Regards
Chilla..

File Adapter - Content conversion parameters at Receiver

Hi all,
I'm trying to translate a XML message to a text line file.
My XML message is this:
<?xml version="1.0" encoding="UTF-8"?>
<ns1:Proveedor_100011 xmlns:ns1="http://sap.com/xi/webservices/buyordint">
<config>
<directory>c:/tmp</directory>
<filename>dynamicFile3.txt</filename>
</config>
<root><string>Header;423423</string>
<lines>
<value>LINE;</value>
</lines>
</root>
</ns1:Proveedor_100011>
I only want to write to text file the "root" TAG content.
I try different "Content conversion parameters" in the integration builder (configuration)
For example:
RecordSet Structure: root
root.addHeaderLine 0
root.fieldSeparator ;
root.endSeparator ;
but the better result is all XML content.
Can someone tell me how to skip "Config" TAG and only write the "ROOT" one?
I'll apreciate any help.
Thanks in advance,
Diego.

Hi Sravya,
I've tried again without better luck.
I change the root element of my message from
Proveedor_100011 to Proveedor100011. (removed underscore)
I created the next message as in your weblog:
<?xml version="1.0" encoding="ISO-8859-1"?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns="http://sap.com/xi/webservices/buyordint" targetNamespace="http://sap.com/xi/webservices/buyordint">
<xsd:element name="Proveedor100011" type="Proveedor100011" />
<xsd:complexType name="Proveedor100011">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
54650790d48f11dab96c001438eb3b44
</xsd:appinfo>
</xsd:annotation>
<xsd:sequence>
<xsd:element name="root">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
45f01f20d48e11dab854d06ec0a8004a
</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element name="head" type="xsd:string">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
45f01f21d48e11da8f1dd06ec0a8004a
</xsd:appinfo>
</xsd:annotation>
</xsd:element>
<xsd:element name="rows" minOccurs="0" maxOccurs="unbounded">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
45f01f22d48e11da894ad06ec0a8004a
</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element name="value" type="xsd:string">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
45f01f23d48e11dab889d06ec0a8004a
</xsd:appinfo>
</xsd:annotation>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="filenode">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
45f01f24d48e11daab91d06ec0a8004a
</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element name="filename" type="xsd:string">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
45f01f25d48e11da8becd06ec0a8004a
</xsd:appinfo>
</xsd:annotation>
</xsd:element>
<xsd:element name="filepath" type="xsd:string">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
45f01f26d48e11dac56cd06ec0a8004a
</xsd:appinfo>
</xsd:annotation>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:schema>
<Proveedor100011>
<root>
<rows>
<value></value>
</rows>
</root>
<filenode>
<filename></filename>
<filepath></filepath>
</filenode>
</Proveedor100011>
I've tried to set "Recordset Structure" in file adapter configuration to "root,filenode" and to "Proveedor110001, filenode" but no output is writed
We are using XI version: SAPKB64015, which version did you use in your weblog?
Thanks and regards,
Diego.

File adapter content conversion

Hi all,
We are having File to File Scenario
We are facing problem in Content conversion in File
Adapter(Sender)
The source file is in text format and fields are
seperated by '|' character
The source file structure is :
Header|No. of Records
Data Record1
Data Record2
Data Recordn
Trailer|No. of Records
 where Data Recordn is of type Field1|Field2|Field3|Field4
 and the number of data records is variable
 e.g.
 Header|5
 2|144012|20050801|20050801
 212|012|20050801|20050801
 244012|2|20050801|20050801
 2144|144012|20050801|20050801
 212|012|20050801|20050801
 Trailer|5
Now , we need to ignore the contents of Header and Trailer Records
 For Header , we are setting the property Document Offset to 1
 Hence the Header record is ignored
 However , we are facing problems in ignoring the Trailer record
 We want to know :
 1. Is there a direct way ( or some propety ) wherein we can ignore the last record of the file ,
 which in this case is Trailer record
 2. We also tried the following :
 a. We set the Recordset Structure to : row,*,trailer,1
 b. However in this case , the keyField is required for row ;
 but since the number of data records is variable ,
 the keyFieldValue cannot be specified
 How should we go about in this case
Please guide us on this
Regards
Shikha

Hi all
Thanks for replies
Actually , we are able to ignore header and that is not an issue
Now if we need to discard the trailer record , we believe that RecordSet Structure should be row,,trailer,1 or header,1,row,,trailer,1
However , since structure is row,* ; we need to specify the keyField column for row ( data records )
Since number of data records is variable , we are not able to set the keyFieldValue for row ( data record )
Can you'all please guide us on this as we are stuck on this .
Regards
Shikha
Message was edited by: Shikha Jain

Sender File Adapter - Content Conversion

HI Friends,
I got a scenario where I need to convert the File to XML document through Sender file adapter..
My file looks like below.
BATCH1234........
12DASER123142JMM
237DSAFDLKC839890
45SDFLASJ90011
BATCH3455...
132FGAR
SD21352525
BATCH998898...
123145DSRTW
12FSTS
So there is a Header and Body for each record set..
My XML Structure is as follows.
<TimeStructure>
<TimeRecord>
 <ControlRec>
 <Field1>BATCH </Field1>
 <Field2> ...</Field2>
 </ControlRec>
 <DataRec>
 <F1> ...... </F1>
 <F2> ...... </F2>
 </DataRec>
</TimeRecord>
<TimeRecord>
 <ControlRec>
 <Field1> BATCH </Field1>
 <Field2> ADFAS </Field2>
 </ControlRec>
 <DataRec>
 <F1> ...... </F1>
 <F2> ...... </F2>
 </DataRec>
 </TimeRecord>
</TimeStructure>
The blog <a href="/people/shabarish.vijayakumar/blog/2006/02/27/content-conversion-the-key-field-problem:///people/shabarish.vijayakumar/blog/2006/02/27/content-conversion-the-key-field-problem
is somewhat relevant to my requirement.
But the problem is I have the keyfield "BATCH" for my header file but don't have any key field in the data record of the input file.
Please help me out how to mention the configuration parameters.
Regards,
Kumar

Hi,
If you don't have constant key value for your detail records, then you can not directly get the required xml.
So in this case, you can read all the records in a common Row model, i.e each record will be considered as a one row with all the values, and then split this row with Substring or java functions in the mapping.
Even you can do this in the Adapter module .
If you have key value for each record to identify then you can try with content conversion.
Regards,
Moorthy

File Adapter content conversion delimited/possitional file format.

Hi,
I have the following file to JDBC scenario, but having some issues with the file content conversion due to the file structure.
Example:
=======
000038A020301
000038A020101=AA1=AC1=AD=AG1=AH1=AI1=AK3049572=BN01 =BOMETLSS_ML_STD_30A7
000038A020200=AA96=AB001=AC17000.000=AD1200=AF13021537=AE=AG8005992427=AH10
OLRENDZZZZ
Example 2:
========
000040A020301
000040A020101=AA1=AC1=AD=AG1=AH1=AI1=AK3049570=BN01 =BOMETLSS_ML_STD_30A7
000040A020200=AA96=AB001=AC17000.000=AD1200=AF13021537=AE=AG8005992425=AH10
000041A020301
000041A020101=AA1=AC1=AD=AG1=AH1=AI1=AK3049571=BN01 =BOMETLSS_ML_STD_30A7
000041A020200=AA96=AB001=AC17000.000=AD1200=AF13021537=AE=AG8005992426=AH10
000042A020301
000042A020101=AA1=AC1=AD=AG1=AH1=AI1=AK3049572=BN01 =BOMETLSS_ML_STD_30A7
000042A020200=AA96=AB001=AC17000.000=AD1200=AF13021537=AE=AG8005992427=AH10
000043A020301
000043A020104=AA1=AC1=AD200619=AG1=AH1=AI1=AK3049568=BN01
000043A020200=AA73=AB001=AC3700.000=AD1300=AF13047285=AE200619=AG8005992423=AH10
000043A020200=AA73=AB002=AC5500.000=AD1300=AF13047285=AE200619=AG8005992423=AH10
000043A020200=AA73=AB003=AC1800.000=AD1300=AF13047285=AE200619=AG8005992423=AH10
000043A020200=AA73=AB004=AC5000.000=AD1300=AF13047285=AE200619=AG8005992423=AH10
000044A020301
000044A020104=AA1=AC1=AD200619=AG1=AH1=AI1=AK3049569=BN01
000044A020200=AA73=AB001=AC3700.000=AD1300=AF10008536=AE200619=AG8005992424=AH10
000044A020200=AA73=AB002=AC5500.000=AD1300=AF10008536=AE200619=AG8005992424=AH10
000044A020200=AA73=AB003=AC2500.000=AD1300=AF10008536=AE200619=AG8005992424=AH10
000044A020200=AA73=AB004=AC5000.000=AD1300=AF10008536=AE200619=AG8005992424=AH10
OLRENDZZZZ
Example Explained:
==============
Position 1-9 is a "Transactional number".
Position 10-11 is "Record type".
Position 12-13 is "Line Item count".
Four record types exist:
03 = Location header
01 = Transactional Header
02 = Line Item
OLRENDZZZZ = EoF marker.
The equal sign "=" is a field separator/delimiter.
In each delimited field, after the first equal sign in the record, the first two characters represent a field qualifier/field name tag/identifier and there only the data begins until the following delimiter.
Each record is ended in a "CLRF"/'nl'.
The file is build up, but not locked and only completed until the EoF marker "OLRENDZZZZ" is inserted by the application on the last record of the file.
My solution so far:
=============
Record Structure: row,*
Record Sequence: Ascending
row.fieldNames: field1,field2,field3,ect.......
row.fieldSeparator: =
row.endSeparator: 'nl'
row.keyFieldInStructure: ignore
ignoreRecordsetName: true
This brings the file into the integation server as xml as follow:
============================================
<?xml version="1.0" encoding="utf-8"?>
<ns:SAPtoFuelFACS xmlns:ns="urn:engenoil-com:i_fuel_facs_sap">
 <row>
 <field1>000038A020301</field1>
 </row>
 <row>
 <field1>000038A020101</field1>
 <field2>AA1</field2>
 <field3>AC1</field3>
 <field4>AD</field4>
 <field5>AG1</field5>
 <field6>AH1</field6>
 <field7>AI1</field7>
 <field8>AK3049572</field8>
 <field9>BN01</field9>
 <field10>BOMETLSS_ML_STD_30A7</field10>
 <field11>BP0003049572</field11>
 </row>
 <row>
 <field1>000038A020200</field1>
 <field2>AA96</field2>
 <field3>AB001</field3>
 <field4>AC17000.000</field4>
 <field5>AD1200</field5>
 <field6>AF13021537</field6>
 <field7>AE</field7>
 <field8>AG8005992427</field8>
 <field9>AH10</field9>
 </row>
 <row>
 <field1>OLRENDZZZZ</field1>
 </row>
</ns:SAPtoFuelFACS>
So far, so good.
The problem I am having is that I have to check for the EoF marker "OLRENDZZZZ" to be present before picking up the file, else the file is not completed.
I have tried a script to rename files in msg pre-processing in the channel, but the problem is the file channel has to be triggered and the original file mask is necessary for this, but then this mask is a valid pickup file mask. So to me it seems the only way is to do this is during the content conversion process as the files not matching the file criteria, where a EoF "OLRENDZZZZ" definition is not present, will not be picked up and be ignored until it is present or totally independent with a batch job.
If someone has a more elegant way to solve this problem with just using the file channel configuration where every thing is pretty much apparent, I would greatly appreciate it if you could assist.
Regards
Willie Hugo

The problem I am having is that I have to check for the EoF marker "OLRENDZZZZ" to be present before picking up the file, else the file is not completed.
I suggest a script.
Say The files are dropped in FolderA. Have a script transfer a file to FolderB only if it finds the EoF marker in a file. Thus FolderB will be what XI will poll and that will always have the complete file.
Hope this sounds good!!!

Replace String in csv file with file adapter content conversion

Hello experts,
I have a sender file channel to receive csv files from an external server. I can process the csv files but I have a little problem. Since the separator in the csv file is a comma and sometimes a comma also appears in the dates but this time it is not a separator.
Example:
1234,20120123,ABCD,customer, which has a comma in it's name,...
5678,20120123,FGHI,customer without comma,...
My plan is to remove all commas when a blank follows.
My current content conversion looks like this:
Record.fieldNames field1,field2,...
Record.fieldSeparator ,
Record.endSeparator 'nl'
Is there something like Record.fieldReplaceString or something similar which I can use? Or is there perhaps a better way to do this?
I'd appreciate every help I can get here.
Best regards.
Oliver.

Hi Oliver,
I think I've got a solution for you, after all. All you need to do is have your customer name enclosed in quotes, like that:
1234,20120123,ABCD,"customer, which has a comma in it's name",...
Use the rest of FCC configuration as usually. You might also want to have a look at this wiki entry for a configuration example:
http://wiki.sdn.sap.com/wiki/display/XI/FileContentConversion
Moreover, see the description for "NameA.enclosureSign" in the help document below:
http://help.sap.com/saphelp_nwpi71/helpdata/en/44/6830e67f2a6d12e10000000a1553f6/frameset.htm
Hope this helps,
Greg

Receiver JMS adapter content conversion

Hi All,
Can anyone provide me guidelines on how to do content conversion for the receiver JMS adapter??
Thx
Navin

Hi,
Based on your structure , you need to configure the JMS CC parameters.
see the below link
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f02d12a7-0201-0010-5780-8bfc7d12f891
regards
Chilla

Key field from content - Sender file adapter content conversion

I am reading a source CSV file that has this structure. All rows in the source file are the same structure: line items of a PO. But there will be multiple POs in a single file, identified by the PO number as one column in the file.
PONum,LineItemNum,Qty,Description
001,1,34,Carrots
001,2,17,Apples
001,3,22,Bananas
002,1,4,Mangos
002,2,9,Coconuts
003,1,44,Grapes
Goal is to generate 3 messages, one for each PO:
<po>
 <num>001</num>
 <line_items>
 ... 3 line items for PO # 001 ...
 </line_items>
</po>
<po>
 <num>002</num>
 <line_items>
 ... 2 line items for PO # 002 ...
 </line_items>
</po>
<po>
 <num>003</num>
 <line_items>
 ... 1 line item for PO # 003 ...
 </line_items>
</po>
Is there any way to use the Content Conversion Key Field Name to group the line items into the correct 3 messages? "Key Field Name" expects a static identifier for each type of row; but mine varies by the PO number in the content.
Or do I need to do this in the mapping? If so, what is the easiest way to split 1 large message of all line items into multiple target messages based on the PO number? (I assume this is better than sending individual line item messages and aggregating them later, as long as the file size is OK.)
Thanks in advance!
RBL
Edited by: Robert Burfoot-Lobo on Apr 8, 2009 11:43 AM

Hi Robert,
If ur goal is to split into 3 messages one for each PO, you can go for message split and using graphical mapping you can achieve that.
Within the message mapping go to the tab Messages.
Change the occurrence of the target message to 0..unbounded.
Also this link may help you.
/people/claus.wallacher/blog/2006/06/29/message-splitting-using-the-graphical-mapping-tool
Regards,
Madhu

Sender file adapter - content conversion question

Hi all
We have a .csv file to be passed to XI that has column headings as well. Is there a way of stripping the header using "Content conversion". We declared the RecordsetStructure as "header,1,item,*" but then it needs a keyFieldname and identifier which is obviously not available as the first line only has column headings.
Hoping for a reply soon.
Thanks
Salil

Salil,
In RecordsetStructure you define as header,1,item,9999999999. But if you have more than 9999999999 records then the extra records after this will come as a second file.
If you expect more item records then increase the number of 9's. Then we dont need to give the key field.
---Satish

Receiver Mail adapter Content type issue

Hello,
I am formatting the body of the receiver mail. The body of the email should look like below.
Dear PI User,
The following Interface has been successfully processed by the middleware PI system.
Please do not reply to this email. If you need more information please contact the Super User.
Regards,
SAP PI Team
The mapping looks fine and My source MT looks like this:
<?xml version="1.0" encoding="UTF-8" ?>
- <ns1:MT_Mail_Reply xmlns:ns1="http://test.com/Mail/Reply">
- <Reply> [0..unbounded]
- <Item> [0..unbounded]
<MESSAGE>Dear Business User, </MESSAGE> [0..1]
/Item>
- <Item>
<MESSAGE>The following Interface has been successfully processed by the middleware PI system.</MESSAGE> [0..1]
</Item>
- <Item>
<MESSAGE>Please do not reply to this email. If you need more information please contact the Super User.</MESSAGE> [0..1]
</Item>
- <Item>
<MESSAGE>Regards,</MESSAGE> [0..1]
</Item>
- <Item>
<MESSAGE>SAP PI Team </MESSAGE> [0..1]
</Item>
</Reply>
</ns1:MT_Mail_Reply>
The mapping works fine without errors and I get the target message as below after mapping-
<?xml version="1.0" encoding="UTF-8" ?>
- <ns1:Mail xmlns:ns1="http://sap.com/xi/XI/Mail/30">
<Subject>ISAP PI Interface Status</Subject>
<From>[email protected]</From>
<To>[email protected]</To>
<Content>Dear Business User</Content>
<Content>The following Interface has been successfully processed by the middleware PI system.</Content>
<Content>Please do not reply to this email. If you need more information please contact the Super User</Content>
<Content>Regards,</Content>
<Content>SAP PI Team</Content>
</ns1:Mail>
t
The context of MESSAGE has been changed to Reply.
In the adapter I still get the following error.
Delivery of the message to the application using connection Mail_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.af.sdk.xi.srt.BubbleException: Failed to call the endpoint [null "null"]; nested exception caused by: com.sap.aii.af.sdk.xi.util.XMLScanException: expecting end tag: {http://sap.com/xi/XI/Mail/30}Mail, but found {}Content at state 1
Please advise !!
Thanks,
Teresa
**I changed the receiver mail adapter to not use Mail package and I receive an email without errors with the Content as mentioned above. **

Hi Teresa,
I think the problem is that you are using multiple "Content" tags. Have you tried to use only one?, you can concatenate all your text.
Check the page 3 of this document to know how introduce new-line character http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d0964d7c-e66e-2910-24bb-ac535e4a5992?overridelayout=t…
Regards.

Receiving file adapter content conversion issue

Similar Messages

Maybe you are looking for