Recently Upgraded to Mac 10.6.6. and I lost my CD extensions
I recently upgraded my Mac OS to 10.6.6 and lost my CD extensions. No music CDs, no DVDs, not even the Snow Leopard cd wil mount now. Any ideas where I can download the CD extensions?
anthonyfromknutsford wrote:
Yes I've checked with Roxio and they are not offering an update to Popcorn 4.
If you can get hold of a version of iLife '11 including iDVD, it would serve you well. Roxio's flagship burning program Toast Titanium is extremely good as well, although not as flexable as iDVD IMHO.
Cheers
Pete
Similar Messages
-
I recently upgrade my mac air to maverick and now my version of iphoto won't work. What can I do??
I recently upgrade my mac air to maverick and now my version of iphoto won't work. What can I do??
This screenshot shows which previous versions of iPhoto are compatible with Mavericks. It also indicates which versions qualify for a free upgrade to iPhoto 9.5.1 and which require a purchase:
Note 1: every day more users are reporting problems with iPhoto 8.1.2 so I've included it in the non compatible category.
Note 2: If your previous version of iPhoto was iPhoto 7 (08) or earlier you'll need to download and run the iPhoto Library Upgrader 1.1 application on the library before opening it with iPhoto 9.5.1
OT -
I recently upgraded to Firefox 13.0.1 and I’m operating a Mac Powerbook Pro with OS of 10.6.8 (Snow Leopard).
Now I’m having intermittent problems with sending emails where Firefox freezes up. There is often a yellow warning above suggesting 32-bit mode, sometimes I can click to shift it that way, sometimes not.
Anyone having these problems?
Any suggestions?I recently upgraded to Firefox 13.0.1 and I’m operating a Mac Powerbook Pro with OS of 10.6.8 (Snow Leopard).
Now I’m having intermittent problems with sending emails where Firefox freezes up. There is often a yellow warning above suggesting 32-bit mode, sometimes I can click to shift it that way, sometimes not.
Anyone having these problems?
Any suggestions? -
I recently upgraded my mac OS from 10.4.8 to 10.6 and now my PS CS3 won't open, why?
I recently upgraded my mac OS from 10.4.8 to 10.6 and now my PS CS3 won't open, why?
You won't be able to buy Pages from the Mac App Store on 10.6.8. You need to reload it from the original source.
(109924) -
I recently upgraded my Mac to Yosemite and I can't use the custom function (grayed out) in Image Trace Illustrator CS6 (physical version). Anyone else having this issue?
Custom will show automatically as soon as you just edit some options. So just go ahead, you don't need to select "custom"
-
I recently upgraded my mac desktop to oxs 10.9.2 and when I opened i photo, it says the photo livrary needs to be upgraded to work with this version of I photo. Where are my pictures? The message is "Your photo library will not be readable by previous versions of Iphoto after the upgrade. The upgrade process for very large libraries may take an hour or more to complete". I'm scared to upgrade!! Does this mean my photos can't be read once I upgrade? Where are my pictures?
First have you backed up your computer, if you have and your iPhoto library is in the back up you have nothing to be concerned about. If you are not using at least Time Machine to back up your system then you should be concerned because well frankly that is simply bad computing practice and you risking all of your data.
As for the message you received all that means is your system was using an earlier version of iPhoto with the version of OS X you previously had installed and now that you have updated to 10.9.2 (Mavericks) your version of iPhoto has also upgraded and needs to get ready to import all of your pictures. If you have backup then you should be confident the upgrade will go through smoothly, Apple generally has very good instructions and will not give bad advice, second guessing them may be cautious but is generally unnecessary. -
I have recently upgraded my mac and ipad to IOS7 and find that Safari will not load onto my iPad. It just shuts down the app. Any ideas? I have been onto Mac who took me through a very long iPad robot, but the problem is still the same! Help appreciated
Do you mean that you did a soft-reset ?
Try clearing Safari's cache : Settings > Safari > Clear Cookies And Data and also Clear History
If that doesn't fix it then try closing Safari via the iPad's multitaskingbar and see if it works when you re-open it :double-click the home button to open the taskbar and then swipe or drag the Safari app's 'screen' up and off the top of the screen to close it, and click the home button to close the taskbar.
After trying the above you could also do a soft-reset (even if this is what you've already done it might be worth trying after clearing Safari's cache and closing the app via the taskbar) : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. -
I have recently upgraded to OSX 10.8.2 and now find that I cannot operate my scanner, an hp psc 1310 series printer/scanner. I get a message saying that Power PC is no longer supported. I am still able to print on the same device. What should I do?
Hi,
PSC 1315 no longer supported for scanning since Mac OS X v10.5 or while using any newer OS, there is no scan software provided by either HP or Apple (Image Capture)
You may find this information stated below for Leopard, the same apply for any newer OS version:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01234231&cc=us&dlc=en&lc=en &os=219&product=374568&sw_lang=
Image capture will not recognize your device as well, only print is supported as you may find listed for teh PSC 1310 Series below:
http://support.apple.com/kb/HT3669#HP
Although there is no official scanning support for your device you may still try the 3rd party VueScan software which list your scanner as supported and compatible with Mountain Lion:
http://www.hamrick.com/vuescan/hp_psc_1310.html
Shlomi -
Re: My Macbook 2009 model was recently upgraded with a new hard drive and upgraded to Mountain Lion OS. I am battling to retrieve all my photos that were ''saved'' in iCloud. Can someone help?
If you are trying to recover photo stream photos, they are only held in iCloud for 30 days. All you would be able ro recover is photo stream photos from the last 30 days.
If you have an iOS device that still has the photo stream photos one it, you can save them to the camera roll by opening the my photo stream album, tapping Edit, tap the photos, tap Share, tap Save to Camera Roll. Once in the camera roll, they can be imported to iPhoto on your Mac as explained here: http://support.apple.com/kb/HT4083. -
I recently upgraded to Mac OS X. I haven't tried to access anything in iWorks 09 since the upgrade, until now. I get an error message when trying to open any of the iWorks 09 applications. What's the fix for this?
Follow Sonicray's advice and when you post try to give as much info about your Mac, your OS, etc... Fill out your Profile info.
-
Recent upgrade of MAC to OS X Snow Leopard. Using a kodak easy share 2730 camera cannot open pix in I Photo. States cannot read Presently have I Photo 08 7.1.5 . Does this have to be upgraded? No problems downloading from this camera previously
There's a long standing issue with Kodaks and OS X. Workatound: use a USB Card Reader.
Regards
TD -
I recently upgraded to Mac OS 10.8.1. I had an Epson Inkjet printer (Stylus C88 ) that had seen its better days. I purchased a refurbished model (C88+ ) to replace the old one, simple enough. Since I've done this before, I didn't think I had to install the CD. I have since discovered the CD isn't recognized on my computer and/or by this Mountain Lion system and that I had to go to Apple to upgrade the new driver for this product, and which I did, but I can't find the epson folder other than the attached. I just want to place an alias printer logo on my desktop but I can't find it anywhere. What to do???
Hi, one question & one suggestion...
What possible things are connected at home but not at the store, inlude every cable, etc.
One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts>Login Items window to see if it or something relevant is listed.
Check the System Preferences>Other Row, for 3rd party Pref Panes.
Also look in these if they exist, some are invisible...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
/System/Library/LaunchDaemons
/Library/LaunchDaemons -
It seems I cannot send imessage from the ipad when the mac is turned off! I have recently upgraded the mac to 10.8.4.
Many thanks in advance for your help.Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: FaceTime is 'Unable to verify email because it is in use'
http://support.apple.com/kb/TS3510
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
You can check the status of the FaceTime/iMessage servers at this link.
http://www.apple.com/support/systemstatus/
Cheers, Tom -
I recently upgraded to iOS 7.0.3 and now my iPhone 4S will only sync purchased music to my phone from iTunes. Help! I have TONS of music that I have bought and burned to my computer, but cannot listen to it on my iPhone. This seems ridiculous!
Also, it's taking FOREVER (over an hour) to sync my iPhone to iTunes...
-
I recently upgraded to Yosemite 10.10.2 and Aperture 2.1.4 will no longer open. I cannot access my photos and I don't want to pay for latest version of Aperture since this application is no longer going to be supported. How can I get my pictures?
If you want just the originals, then you can go into the Aperture library (right click on it and do "show package contents"). Inside is a directory called "Masters" and you can find the original files in a bunch of subfolders.
But... you'll lose all adjustments, keywords, and other information, and just have the files as they were imported originally from the cameras.
Easiest is probably to buy Aperture and update everything, and then migrate to the Photos application down the road if that's what you want. Aperture 3.0 came out in 2010 (five years ago!) so it's not like you've upgraded in a while
Maybe you are looking for
-
Disk Utility image disk doesn't work
Disk Utility doesn't help Hi there! I try to install the os x mavericks update on a Snow Leopard 10.6.4 Mac from the Apple page. A message told me there was an error on the disk so I tried to repair it with Disk Utility. It didn't work. It ask me to
-
Transactions documentation and a difficult(?) use-case...
I would like detailed information about how TransactionMap work with different isolation levels, ie how both changes performed by the application holding the map and in the distributed cache is propagated between them etc. More detailed information a
-
I'm having 10.8.3 and today 18-Apr Thursday I had installed latest java 7 update. Now when ever I test java page it just redirects the page to Java download on both Firefox and safari. I tried deleting the cache from Java Sec Panel - temp ile but sti
-
Pagination using JSP Presentations.
Hi, I have implemented a search function in my JSP presentation. The search shows an array of bpm objects in a table and I want to put them in pages with a pagination like google does. I've tried with a taglib, importing the jar in my library and mod
-
Trigger works fine in Toad but not in the Application Form
Hi All, I created a trigger that executes BEFORE UPDATE ON PO_REQUISITION_LINES_ALL. When I exceute in Toad a manual update on this table, the trigger appears correctly, but When I am on PIC form in PO, and execute save with blank value, the trigger