Recently, when I try to Print from a web page the printer will only print 1/2 a page.

Recently when I try to print from a web page or e-mail, it will only print the left side of the page.  My printer is a Photosmart Plus B209a.

This article should help resolve your partial pages:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01892627&cc=us&dlc=en&lc=en
Give the steps listed under your operating system a try and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Similar Messages

  • I recently updated to the latest version of Itunes (11.1) and when i try to play music or tv shows, the sound lasts only for a second before going completely mute, anyone know how to fix this?

    recently updated to the latest version of Itunes (11.1) and when i try to play music or tv shows, the sound lasts only for a second before going completely mute, anyone know how to fix this?

    Check this thread out -> iTunes 10.4 & Multimedia Keyboard
    It doesn't look like there is a fix yet, but some people in the thread are pointing to this workaround:
    pikot wrote:
    Following some suggestion i seem to have found a solution for the problem and my play/pause, next and previous buttons work with iTunes 10.4.1
    - You need to open a text editor (like notepad) as an administrator.
    - Open the SetPoint players.ini file (C:\Program Files\Logitech\SetPointP\players.ini)
    - Edit the line under the [Players] section to match the line bellow (bold is the wndClass which is to be changed)
    iTunes=wac,iTunes.exe,ITWindow,xxx,xxx,xxx,xxx,xxx,xxx,xxx,0,1,iTunes
    - Save the file
    - Restart the SetPoint and hopefully play/pause, next and previous buttons should work (at least they work for me)

  • I have been streaming videos and music from my phone and iPad. I just got a new MacBookPro and when I try to stream from it, I get the mirror image, but no sound. ????

    I have been streaming videos and music from my phone and iPad. I just got a new MacBookPro and when I try to stream from it, I get the mirror image, but no sound. ????

    Hi Avonbikerider,
    If you are only having the audio issue when Airplay Mirroring from your MacBook Pro, you may find this forum discussion helpful:
    Apple Support Communities: No Audio when Airplay Mirroring from Mac to Apple TV
    https://discussions.apple.com/thread/4167956
    Regards,
    - Brenden

  • HT1414 Ive got a iPod 3G running 4.2.1 and want to upgrade the OS, iTunes keeps saying its the latest version.  Ive downloaded a 4.3.5.ipsw but when I try and restore from this iTunes says the firmware isn't compatible...any idea's what to do next?

    iTunes keeps saying its the latest version.  Ive downloaded a 4.3.5.ipsw but when I try and restore from this iTunes says the firmware isn't compatible...any idea's what to do next?

    The iPod 3g will only support iOS up to 4.2.1 and nothing beyond that.
    Allan

  • HT4356 I checked everything out and had no problem printing from IPAD/MINI using the HP Photosmart 6520 printer, but the next day, using same application, my HP did not show, but was looking for the AirPrint Printer, what am I doing wrong?

    Using IPAD2, IPAD MINi, HP photosmartE6520 set up on wireless network.  No problem printing from my devices, but the following day, it is looking for AirPrint printer, why? 

    Hello lenc48,
    Welcome to the HP Forums.
    I see that you are having a few issues when it comes to printing from your mac as well as some two sided printing issues.
    I do have a some suggestions that we can try in the attempt to troubleshoot this issue.
    First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
    Please remove the usb cable (if using wireless, disregard this step) from the printer and from the Mac and leave it disconnected until further notice.
    Please click on the first link that will give you instructions on Uninstalling the Printer Software.
    Once the software has been removed, please disable any anti virus protection that you may have on the Mac. 
    The next step we are going to take is downloading the HP Photosmart 6520 e-All-in-One Printer Full Feature Software and Drivers - OS X 10.9 Mavericks.
    The installation will prompt you when to connect the usb cable (You will see a prompt for a wireless connection as well if that is the connection type you would like to use) so please do not connect the cable until prompted to do so.
    If you are still having issues, feel free to write me back or you can contact HP Total care direct.  If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
    Thanks for your time.
    Cheers, 
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • When I try to format an external usb drive  the progress bar only goes half way then freezes up can anybody help please

    When I try to format an external usb drive  the progress bar gets to half way then freezes , or stops and  what ever time I allow it never gets any futher on , I have to go to the task bar and click quit  to get on  and the usb drive is not formatted  is there a fault with my disk utility program  I have updated the system
    to lion 10.7.2
    Can anybody advise please

    Are these new external drives? How are the currently formatted? Have you tried doing this:
    Drive Preparation
    1. Open Disk Utility in your Utilities folder.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    Steps 4-6 are optional but should be used on a drive that has never been formatted before, if the format type is not Mac OS Extended, if the partition scheme has been changed, or if a different operating system (not OS X) has been installed on the drive.

  • What is the best compressor setting to use ... when exporting a 720p timeline from FCP for a project that will only be played back in a standard def monitor?

    What is the best compressor setting to use for DVD StudioPro ... when exporting a 720p 30 timeline from FCP for a project that will only be viewed in a standard def monitor?

    Update: The iBook can play any 480p video and higher if I encode them with DivX and in AVI format. But of course this is not compatible with my iPhone 4. At least I can shrink my library now and get away from the full MPEG-2s. I don't get why I can't use Apple's h264 though. There has to be a setting I am missing. The sample Apple h264 videos from the days of Tiger worked flawlessly on my iBook when it was new so the CPU must be capable of decoding it. I really can't understand this.
    Also, since I made my videos in English for my family, I had to create soft subtitles for my wife's Chinese family, and I can't get players like QT with perian or MPlayerX to sync them properly to an AVI encoded with DivX, they only sync well with the iPhone 4 m4v/mp4 formatted files I made. This is a real pickle.
    So now I may need three or four copies of each video, LOL. I need to hardcode the subtitles if I want to use AVI to playback on older machines, and keep the mp4 file for the iDevices too, while keeping higher quality h264 videos for my American relatives...
    If h264 is compatible with my iBook, what is the proper encoding settings? Must I dramatically lower the settings or frame rate? I can settle on 2 copies of each video that way. One iBook/G4/eMac compatible video that syncs correctly with my srt soft subs, and another version that works well with my iPhone 4 and iPad.
    All in all, I will end up with more than 3 or 4 version of each video. On my late G5 dual core I have the full 720-1080p uncompressed master files. On my i5 iMac I have the h264 compressed versions for distribution, and lower versions for my iDevices. Now I need to keep either full MPEG-2 files for the iBook to play, or convert to older formats like DivX AVI for our family's legacy machines. I am running out of hard disk space quick now, LOL.
    Is there an easier way?

  • Purchased HP6510 and cannot print photos onto to 4x6 photo paper; will only print to 8x10 paper.

    Cannot get HP6510 to print to photo paper; will only print on 8x10 paper. When choosing print options enter 4x6 on photo paper and will not use photo tray; goes to 8x11 paper.  VERY FRUSTRATED

    Hi, check your 6510 printer properties.
    Please mark the post that solves your issue as "Accept as Solution".
    If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
    I am not a HP employee.

  • When I try to load ABC news I get the error message that says Firefox stopped this page from loading. Do you want to allow it? Of course I do, or I would not have gone there. It does not do this onother pages. How do I make it stop?

    It consistently does this when I try to read ABC news and when I try to go to my bank's web site. I am getting real tired of this. This message will pop up over and over even after clicking allow. How do I shut this off it is really annoying.

    See:
    *Firefox/Tools > Options > Advanced > General : Accessibility : [ ] "Warn me when web sites try to redirect or reload the page"
    The setting in "Tools > Options > Advanced > General" is meant as an accessibility feature, as you can see by the label of that section, so that people with disabilities or people who use screen readers do not get confused and is not meant as a safety protection to stop redirecting.
    See also:
    *https://support.mozilla.org/kb/Options+window+-+Advanced+panel#General_tab
    *http://kb.mozillazine.org/accessibility.blockautorefresh
    *http://kb.mozillazine.org/Accessibility_features_of_Firefox

  • What to do when I try to purchase from iTunes and get the message, Your Apple ID has been disabled?

    What can i do when I am logedin to my iTunes and the the message, Your apple ID has been disabled, when i try to purchase?

    Take a look at this Apple support article:
    http://support.apple.com/kb/TS2446
    Regards.

  • My 5610 will not print from a web site. It will print from word on the computer.

    When I plug in the USB cord from the printer to the computer, I hear a bump-bump that it recognizes it. I can print anything off of the computer, but cannot print anything off of the internet. Tech support does not know what to do.

    Hello, 
    May i know the browser you are using to print the web page ( Internet Explorer / Chrome / Mozilla Firefox ) ?
    Regards,
    Jabzi
    Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
    Click "Accept as Solution" if it solved your problem, so others can find it.
    Although I am an HP employee, I am speaking for myself and not for HP.

  • Our lap top lost power as it was printing from our hp psc 1315 and will not print now

    The printer was in the middle of printing and the lap top lost power. When I repowered it the print spit out and now the printer will not print.  The print sits in the  que but does not finish. Help - thanks

    Hello @dbrown68,
    Welcome to the HP Support Forums!
    I understand that since losing power on your laptop in the middle on a print job your HP PSC 1315 All-in-One Printer will not print from your Windows XP computer. I would like to assist you today with resolving this issue.
    To start can I please have you click here to download and run the HP Print and Scan Doctor Tool. This Tool will run on your computer and 'fix printing' issues for you. Should any driver, software or connection conflicts be found than the HP Print and Scan Doctor Tool will attempt to resolve the conflicts for you. There is the likelihood that when the computer shut down during the in progress print that print job became corrupted in the Print Spooler of the computer. The Print Spooler is the print system on your computer and controls all printing no matter the make or model of printer. The job can remain corrupted and stuck in the Print Spooler even after printing. Ideally, if any Print Spooler corruptions are found the HP Print and Scan Doctor Tool will resolve those corruptions.
    Please respond to this post with the result of running the HP Print and Scan Doctor Tool. Good luck!
    X-23
    I work on behalf of HP
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

  • Sometimes I cannot get my apple tv to work after being in sleep mode. I then have to turn the power on and off to make it work. Note the white light will come one when I try and wake it up. But, the light will not blink.

    Most of the time when I wake up my apple tv, the white light will come on, but will not blink when I have this problem.  I then have to pull the plug and then put the plug back in the socket, then it will work. 

    How long have you had it? If it is still under warranty, you can have Apple help you out completely. If it is not under warranty, Apple might still be able to send you articles to assist you in this manner. Check "Contact Us" on any page at the bottom.

  • What can i do when i try to order a photo book and the upload will not complete

    I have been trying to order a photo book thru iphoto and my computer crashes during the upload portion of the process.  Help!

    1 -
    Before ordering your book preview it using this method - http://support.apple.com/kb/HT1040 - and save the resulting PDF for reference - the delivered book will match it.
    2 - if the preview is good boot into safe mode and order
    LN

  • I have an epson printer epson stylus office BX625 FWD that will only print in black and white on my PC it prints full colour

    i am unable to print in colour only black and white where as my PC prints all day in colour

    What does airprint have to do with printing in bw vs in color? The user hasn't even stated which printing method they use.
    I watched your video the other week after seeing you post it in a thread where you also suggested to it to be the solution. The video could not have been more off topic and was the biggest waste of anybody's time. So it is completely suspect when you keep injecting your youtube video in several threads.
    There's a few things that changed when it comes to printing and scanning in Yosemite.
    The first order of business is that users should get the latest driver for their device/printer/scanner. That will get them up and running before they even finished taking notes while watching videos. 

  • My printer was working fine. Now it will only print in code not words what do I do??

    My hp officejet 4500 all in one wifi. Was working fine now it wont print words only will print in codes.  Already reinstalled printer but that didn't correct the problem.  Im desperate   ;{

    Did you completely power off the printer and the computer? Sometimes (maybe due to unexpected shutdown, glitch in the network, etc.), data get left in the port, and resulting in this behavior. A complete shutdown should clear the ports.
    ======================================================================================
    * I am an HP employee. *
    ** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **
    ***Click on White “Kudos” STAR to say thanks!***

Maybe you are looking for

  • Error in BPM with multimapping.

    Hi, I've got next  error in a transfromation step of bpm with multimapping :   <?xml version="1.0" encoding="utf-8" ?> - <MappingTrace>   <Trace level="1" type="T">Mapping http://www.miquello.com/C3900 IM_I3934_REPLICA_BBY , Software Component Versio

  • DollyXs - Release version Does not recognize WriteFishPrice.pln

    Hi, I am trying to follow the Getting Started for  Step 1: Use DollyXs to generate a dialog-based plug-in project I have generated the win c++ files using DollyXs, however when I try to load the release version of WriteFishPrices in my Indesign 5.5 t

  • Sun SPARC Enterprise T5120 GUI not working

    Dear Professional, I have new Sun SPARC Enterprise T5220 and i am booting this server to get GUI to access my installed application. but i am getting ok prompt it is not giving me access to GUI login windows. Sun server details are: Platform type: Su

  • DVD Burn Folders....... Please Help

    Recently, I tried burning a dvd with some coursework on for a deadline on my MacBook (10.4.11). Everything went fine until a clicked burn in the burn folder of the disk. there was an error each time i tried burning the DVD, even when i tried creating

  • Separate Vocals from a track in Garageband?

    I imported a song into garageband and I want to separate the vocals. Is there a program or a way to do this in garageband.