Recommendation for setting up Data Guard for EBS R12 12.1.3

Hello Experts,
I would like to get some experts opinion and recommendation on setting up Data GUARD for EBS R12.1.3 running on Linux based systems.
Firstly I would wanna let you all know that I am just geek in this subject matter so do excuse me for any mistakes.
While we are planning on setting up Data Gurad fro R12 what are the best practices to consider ?.
We have 2 node rac enabled database and would wanna have non-rac based physical standby, based on this I believe that having db tier on remote or standby site is enough ?
if db node is enough for standby location what are things to be done when a fail over / switch over / role transitioned to standby for the app node from primary site to point db on the
standby location or do we have to have both apps and db tier @ stand by location
--However having a apps tier/node at standby will be of no use as we are planing to run db on mounstate meaning not a active data guard setup.
Please do reply with your recommendation/suggestions/pointers
Thanks in Advance.

Service Provider Access resulted in exception 'oracle.apps.fnd.soa.util.SOAException: SystemError: Error while sending message to server. http://ec2-107-22-78-224.compute-1.amazonaws.com:8000/webservices/SOAProvider/EbizAuth?Generate=1132&soa_ticket=Tu2z7GYoWPwq-VdgimKRFg..' when attempting to perform 'GENERATE'. Please view Service Provider logs for more details
Can you find any details about the error in the log?
I have looked at the following Note as well:
Error using the Generate WSDL Button in Oracle E-Business Suite Integrated Soa Gateway Release 12.1.1 [ID 1090946.1]Did the doc help?
Any one know what may be causing this issue? Do we have to do additional setup for SOA gateway after the standard install of the OVM? I tried to follow the steps in the note above but I do not see any entry for "<jdbc_url oa_var="s_apps_jdbc_connect_descriptor"/>" in the file data-sources.xml.
Anyone have any ideas?Have you reviewed these docs?
Oracle E-Business Suite Integrated SOA Gateway Troubleshooting Guide, Release 12 [ID 726414.1]
Oracle E-Business Suite Integrated SOA Gateway 12.1.1 Consolidated One-Off [ID 815196.1]
Thanks,
Hussein

Similar Messages

  • What is the need for setting property data inside the JMSMesage

    Hi
    Could anybody please let me know
    *What is the need for setting property data inside the JMSMesage??
    For example i have a seen a similar example as shown ??
    I have seen a
    Message.setStringProperty("Sport","Basketball");
    and also please tell me how can the MDB recievies this property data ??
    Thanks in advance .

    raviprivate wrote:
    Could anybody please let me know
    *What is the need for setting property data inside the JMSMesage??
    For example i have a seen a similar example as shown ??
    I have seen a
    Message.setStringProperty("Sport","Basketball"); Look at the detail JMS documentation on [Message Properties|http://java.sun.com/j2ee/sdk_1.3/techdocs/api/javax/jms/Message.html] .
    >
    and also please tell me how can the MDB recievies this property data ?? MDB onMessage method argument is the Message object and if you look at the documentation, Message interface has getter methods to retrieve the properties.

  • How to set a date range for date field ?

    Dear Experts,
    Scenario:
    I have a query in validating the date field in my BSP application. My application is for maintain infotype 0023 Other/Previous Employers online by employees in the company.
    As per our design we are maintaining the all employment details of the employee both ( with in the current company / previous employment outside the company) in the same infotype.
    Every employee will have a hiring date within the SAP HR system. We consider this date as the cutoff date between current and previous employment in our application. When the employee updating the details wia BSP page I need to check the following.
    Record inside current company: Validation that, the user should only able to enter BEGIN DATE (BEGDA)  greater than or equal HIRING DATE and END DATE(ENDDA) should be greater than FROM  DATE (BEGDA).
    Record outside current Company: Validation that, the user should only able to enter BEGIN DATE (BEGDA)  less than or equal HIRING DATE and END DATE (ENDDA) should be greater than FROM  DATE (BEGDA) and less than HIRING DATE.
    Technical Requirement:
    How to set a date range for date field, i.e. how we can limit the date range in a HTMLB date field? Can this it be achieved via standard functionality of HTMLB?
    Following is the code to describe date field in my application.
        <htmlb:inputField id= "ENDDA_NEW_IN"
                          type= "date"
                    doValidate= "TRUE"
                      showHelp= "TRUE"
                      disabled= "FALSE"
                         width= "183"
                         style= "cssTextAreadate"
                         value= "<%='99991231'%>"/>
    Thanks a lot in advance for your assistance and help.
    Cibinu2026
    Edited by: cibin kuruvilla on Nov 12, 2008 11:13 AM

    Hi,
    This functionality is known to be very important and is a key part of the next major release of the JRC planned for the first half of 2008.
    Regards,
    <p>Blair Wheadon</p>
    <p>Product Manager, Crystal Reports</p>

  • How to setup Data guard for SAP database?

    Can someone please tell me how to setup data guard for SAP databases?
    Thanks,
    Abhi

    Hi Abhi,
    have a look at OSS 105047 - Support for Oracle functions in the SAP environment you find this under
    14
    Oracle Data Guard
    You can use "Physical Standby".
    You cannot use "Logical Standby".
    You are allowed to use Fast Start Failover (FSFO) but SAP Support is not provided.
    You can use Data Guard Broker.
    You can use Maximum Performance Mode, Maximum Availability Mode and Maximum Protection Mode.
    In the case of Maximum Availability and Maximum Protection, you must pay particular attention to a fast network connection in order to avoid performance problems.
    Maximum Protection causes the primary database to terminate if problems occur in the standby database.
    And here you find on Oracle white paper from 2010 http://www.oracle.com/us/solutions/sap/wp-ora4sap-dataguard11g-303811.pdf
    Perhaps some SAP user have answers for you http://scn.sap.com/community/oracle/content?query=guard
    regards
    Kay

  • What is the best practice for setting up warehouse inventory for oil & gas tank farm

    Hi, i want to know the best practice for setting up warehouse inventory for oil & gas tank farm. SAP has these levels for inventory management in warehouse environment: warehouse-aisle-shelf-bin. To me the bin seems to be the central location for inventory. So do i set up each oil tank as a bin location?

    Hi,
    Please refer below link:
    https://help.sap.com/saphelp_sbo900/helpdata/EN/ad/4f233a7b864c7cbe2b57ad09246adb/content.htm
    SAP Business One 9.0 Training - Feb 6, 2013 - Warehouse Bins - YouTube
    Thanks & Regards,
    Nagarajan

  • License Type Requirements To Use Data Guard For Oracle EE

    Hi,
    I haven't been able to get a straight answer on this, so hopefully someone can help me.
    We currently have two physical servers, both licensed to run Oracle Database 11gR2 EE, however one is running a cpu-based license (primary server/production) and the other is running a named-user based license (secondary server/soon-to-be-standby server).
    I had no hand in selecting the license model, so this is what I have to work with. So the question is this: With this type of license model differences, can I use Oracle Data Guard?
    Our Oracle software vendor says no because of the differences in the license models.
    Any feedback would be invaluable. Thanks.

    That is so because there is not much to say about it: You create your standby as described in the Data Guard doc (RMAN DUPLICATE)
    Then you ship the Archivelogs to the standby and do recover database there. Technically easy. No higher protection mode possible, though.
    I am no License Specialist, but I think that you will always need some kind of license for the standby database - even if you maintain it this way.
    My recommendation would be to clarify with your company first what your Recovery Point Objective is - can you live with the probably high amount of data loss in case of Disaster on the Primary?
    If not - purchase the correct license and continue with Data Guard Best Practices instead of doing a home grown solution.
    Security is not cheap.
    Kind regards
    Uwe Hesse
    http://uhesse.wordpress.com

  • Trying to programmatically set the data-source for a Crystal reports report.

    I've got the following existing procedure that I need to add to in order to programmatically set the data-source (server, database, username, and password) for a Crystal reports report.
     I added the connectionInfo parts, but can’t figure out how to attach this to the existing
    this._report object.
    This is currently getting the connection data from the report file, but I now need to populate this connection data from a 'config.xml' text file.
    Am I trying to do this all wrong?
    using System;
    using System.Collections.Generic;
    using System.Linq;
    using System.Text;
    using CrystalDecisions.CrystalReports.Engine;
    using WGS.Reports.Reports;
    using CrystalDecisions.Shared;
    using WGS.Reports.Forms;
    namespace WGS.Reports
    public class ReportService
    ReportClass _report;
    ParameterFields paramFields;
    ConnectionInfo connectionInfo; // <- I added this
    public ReportService()
    public void DisplayReport(string reportName, int allocationNo)
    if (reportName.ToLower() == "allocationexceptions")
    this._report = new AllocationExceptions();
    PrepareConnection(); // <- I added this
    PrepareAllocationExceptionReport(allocationNo);
    this.DisplayReport();
    private void PrepareConnection() // <- I added this
    //test - these will come from the config.xml file
    this.connectionInfo = new ConnectionInfo();
    this.connectionInfo.ServerName = "testserv\\test";
    this.connectionInfo.DatabaseName = "testdb";
    this.connectionInfo.UserID = "testuser";
    this.connectionInfo.Password = "test";
    this.connectionInfo.Type = ConnectionInfoType.SQL;
    private void PrepareAllocationExceptionReport(int allocationNo)
    this.paramFields = new ParameterFields();
    this.paramFields.Clear();
    ParameterField paramField = new ParameterField { ParameterFieldName = "@AllocationNo" };
    ParameterDiscreteValue discreteVal = new ParameterDiscreteValue { Value = allocationNo };
    paramField.CurrentValues.Add(discreteVal);
    paramFields.Add(paramField);
    private void DisplayReport()
    frmReportViewer showReport = new frmReportViewer();
    showReport.ReportViewer.ReportSource = this._report;
    showReport.ReportViewer.ParameterFieldInfo = paramFields;
    showReport.ShowDialog();
    showReport.Dispose();
    Any help would be much appreciated.

    Hi Garry,
    Please post SAP Crystal Reports questions in their own forums here:
    SAP Crystal Reports, version for Visual Studio
    We don't provide support for this control now. Thanks for your understanding.
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • How can I set a date range for a Date/Time Field in LiveCycle ES2?

    I need to set a specific date range for a form set up in LiveCycle ES2. Cannot see where i allows me to do that without a code entered.

    Hi,
    You can't set a start and end date for the date/time field, the best you can do is validate the range after the user has selected it.
    An alternate is to make your own date / time field, like this sample http://adobelivecycledesignercookbookbybr001.blogspot.com.au/2013/05/an-alternative-date-p icker-for.html
    Regards
    Bruce

  • Install Guide of Active Data Guard for 11g R2 on Linux

    Friends,
    Searched for this on tahiti.oracle.com which redirects you to the oracle's docs.
    Anyone knowing where to find installation guide for active data guard of 11g R2 on linux?
    Thanks much.

    This article looks useful
    http://dbastreet.com/blog/?p=16
    Also you may want to check Larry's book on 11g Data Guard. It has a complete chapter on Active Data Guard.
    http://bit.ly/cGcgEw

  • Using data guard for migration pruposes.

    Hi we are looking to consolidate a couple of databases onto a single server. One of the databases is our bi database which is currently running on a single server and it is running oracle 10.1.0.3 on suse linux 64 bit.
    We also have an oracle 2 node cluster running on RHEL4 64 bit linux itanium. which is our sote database.
    We are looking to create a physical standby server of the store database onto a new server and storage array and also we are looking to migrate the bi database over to the same server/storage platform and would like to use ASM as the storage option for both of the database once they are migrated and also replicated to the new server.
    I guess my question is...can I run multiple different versions of oracle on the same server or is this just a bad idea? we know that we need to have the same version 10.2.0.3 for the physical standby server which is a different version than the bi datatabse so would it be better idea to upgrade the bi database to also be running 10.2.0.3 before we are to try and replicate it to the new hardware?
    I hope this is not confusing,
    Thx.

    Lets start with what physical Data Guard standby is ... it is the creation of a row-for-row, block-for-block duplicate of a primary production database.
    If the version are not identical that is impossible.
    If the data contained within them is not identical that is impossible.
    If you want to merge databases I would suggest Transportable Tablespaces ... nothing is faster and safer.
    Once you have you data merged you can then create a physical Data Guard standby for purposes of replication if you wish.

  • Problem setting up data collection for a performance problem

    We have a performance problem on our production environment: there is a query that is long to display specially on specific records involving a lot of détails. I had the idea to set up data collection to investigate the problem.
    I used the wizard to set up data collection with default settings.
    I had created a database PERF_DW on our test server for that purpose.
    I didn't have any problem with the wizard: it created data collection sets and SQL Server agents tasks and probably many objects. But I don't know where I missed something  but I didnt, have the chance to specify the database I wanted to tune
    and even when I started data collection, I couldn't figure out where were the reports.
    Then I tought that I did it all wrong so I stopped data collection and dropped the database and tried to deleted the jobs created and I had the following message:
    TITRE : Microsoft SQL Server Management Studio
    Échec de Supprimer pour Travail « collection_set_1_noncached_collect_and_upload ».  (Microsoft.SqlServer.Smo)
    Pour obtenir de l'aide, cliquez sur :
    http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=11.0.2100.60+((SQL11_RTM).120210-1917+)&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Supprimer+Job&LinkId=20476
    INFORMATIONS SUPPLÉMENTAIRES :
    Une exception s'est produite lors de l'exécution d'une instruction ou d'un lot Transact-SQL. (Microsoft.SqlServer.ConnectionInfo)
    The DELETE statement conflicted with the REFERENCE constraint "FK_syscollector_collection_sets_collection_sysjobs". The conflict occurred in database "msdb", table "dbo.syscollector_collection_sets_internal", column 'collection_job_id'.
    The statement has been terminated. (Microsoft SQL Server, Erreur : 547)
    Pour obtenir de l'aide, cliquez sur :
    http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&ProdVer=11.00.3128&EvtSrc=MSSQLServer&EvtID=547&LinkId=20476
    BOUTONS :
    OK
    Now I understand that the collectors prevent the jobs from being deleted but I can't delete the collectors.
    What should I do?
    Any help is appreciated.
    Thank you for your advice.
    Sylvie P

    Hello,
    Please refer to the following article.
    http://blogs.msdn.com/b/sqlagent/archive/2011/07/22/remove-associated-data-collector-jobs.aspx
    You can run the dcclenaup.sql script mentioned in the article.
    Another option is using sp_syscollector_cleanup_collector.
    http://blogs.msdn.com/b/sqlagent/archive/2012/04/05/remove-associated-data-collector-jobs-in-sql-2012.aspx
    Hope this helps.
    Regards,
    Alberto Morillo
    SQLCoffee.com

  • Recommendations for setting up an Xserve for my office?

    I'm setting up a new office (we do operations research consulting) and we're doing an all Mac computing/networking setup with hopefully no IT support since overhead expenses are an issue for us during our startup phase. I've been using Mac's since "the beginning", but I've never setup a server before. We think we may need a server for the following reasons:
    1. File sharing (we need to maintain project/administrative files as well as an online technical library)
    2. Firewall
    3. User account, etc. management
    4. Hosting a corporate website (this is informational vs. transactional)
    My questions:
    1. Do we need a server? I'm pretty sure the answer is "yes" or at least that a server would be helpful.
    2. Is it reasonable for a server neophyte to setup and maintain a network server for a small group of users (initially less than 5)? I'm hoping to spend no more than 4-5 hours per week doing this administration.
    3. What specific Xserve configuration is needed for the uses listed above? Is redundant hardware (e.g. power supply) really needed?
    Apologize for the broad scope of this question; any help you can provide will be most welcome.
    iMac Intel Core Duo   Mac OS X (10.4.8)  

    Everything DPC says is good advice.
    I'm worried about the weeks of setup time required, however. What if I just initially use Xserve for network file sharing?
    Weeks is an over statement. An Xserve will arrive with the latest system on it ready to run out of the box. When you boot it will be in "configure me" mode which is easiest to do from a remote computer. (Although the new Intel's do have video built-in.) If you have your ducks in a row - a permanent IP address for the server ready and knowledge about your local DNS system etc - you can get it set up quickly. For file serving you would then have to add client accounts, groups, create shares and add data to them. Five minutes is a bit optimistic but a couple hours with certainly reasonable. If you aren't used to the server environment tools I would add at least a couple hours for screwing around and documentation searching but if you read the Apple set-up guide before hand you should be in pretty good shape.
    The server does come with a firewall - a pretty good one too. But there are a couple things to think about in terms of security that lead one to thinking a separate appliance is a good idea. When your firewall is run by your server on your server box then a security hole in the OS itself or a vulnerable service may allow someone to get at your box in a way that essentially circumvents the firewall. If you run a firewall that runs on a different system - BSD on an old PC or even a commercial firewall box - then someone would need to defeat the firewall device and then your actual server box. This raises the bar significantly and would probably preclude script kiddies and their ilk.
    Another thing I would suggest is running the website on a sacrificial LAN on the other side of the firewall disconnected from your local network. Since webservers are a huge vulnerability in the network sense not running in on box that also houses your essential business data is just a good idea. I know that multiple servers - or server OSes - isn't practical for many people but it is still a good idea.
    The bottom line is that an Xserve could/would do all these things for you. Don't forget UPS, rack mounting, cooling and data back-up as you plan your system. Also know that the Xserve is much louder than your average computer and you should plan for that as well.
    Hope this helps,
    =Tod

  • I am looking for a simple data logger for temperature

    I am having a hard time finding a basic data logger for recording temperature over a period of several minutes. I am using a SCXI 1001 Chassis, with SCXI 1303 terminal blocks hooked up to a computer running Windows XP and Labview 8.0 and VI Logger Lite.

    Hi Joel,
    Thanks for posting.  You could log your data
    using either LabVIEW or VI Logger.  If using VI Logger, the following
    screenshot from the help file explains how to log data:
    If you are using LabVIEW, you can use the Write to Spreadsheet File function (or a number of other functions depending on your preference).
    If you are using the DAQmx driver, a third option would be to download SignalExpress. 
    The LE edition is free, and provides the basic functionality that you
    need to log your data to a file.  The SignalExpress download comes with
    a 30-day trial of the full version--it should be fairly intuitive to
    get started, but don't hesitate to post on the SignalExpress forums if you have any questions.  Have a great weekend!
    -John
    Message Edited by John P on 01-09-2009 06:03 PM
    John Passiak
    Attachments:
    VI_Logger.PNG ‏160 KB

  • What to consider for setting up the iPad for POP mail?

    Hi to All,
    I would like to write a setup manual for setting up iPad on free web hosting account. I am currently using host1free.com, but I guess it is the same thing for every web hosting (setting up the email). So my questions would be:
    1. What steps in iPad I need to follow to setup for POP account.
    2. Is any wizard in iPad to setup POP mail account?
    Thank you.
    Message was edited by: Hathor5

    Welcome to Apple Discussions!
    Ask the company providing you internet juice to get online. If it is Comcast, it typically is smtp.comcast.net or mail.comcast.net. If it is Verizon, it is outgoing.verizon.net. If it is someone else it is some SMTP server that is assigned by the company that you pay your bills to get online with.

  • BAPI/FM for setting the user status for the Project definition and WBS elem

    Hi,
    I have to set the User Status for the Project Definition and the WBS elements in that project.
    The User status to be set is the same for the project and wbs elements.
    Please let me know if there is any BAPI/FM to set the user status..
    Thanks in advance.
    Regards
    Shiva

    Hi Shkithija,
    There is a dump encoutered in the form "PS_FLAG_GET_GLOBAL_FLAGS" for 'chk_precommit_ok' in the "BAPI_PS_PRECOMMIT".
    But it is showing SY-SUBRC = 0 when used along with BAPI_TRANSACTION_COMMIT.
    May i know what are input parameters we need to pass it to "BAPI_PS_PRECOMMIT".
    Do you have any idea.
    Please let me know
    Regards
    vishnu

Maybe you are looking for

  • Dual CPU's! Dual CPU's??

    Lo all, I have dual CPU system, 2x Intel Pentium III, 866 Mhz. How do I know Arch uses both CPU's, and does the stock kernel support SMP?

  • Result should Display at dashboar after selection of dashboard prompt

    HI, i develop a dashboard with dashboard prompt .when i go to dashboard page first it's show me all records then i select a prompt value and press go button then it's show me result according to prompt.i want at first it don't show any record (as it'

  • Isync and upgrade 10.4.9 with Nokia N80

    I have previously synced my N80 without problems, however since this upgrade attempting to open isync gives the message" isync can't open because of a problem with a plug in." "The following plug in doesn't work with this version of isync. Click the

  • Wireless Problems....

    Ok, lets see here: I read several postings on the boards and did research ahead of time to try and avoid posting any messages. Well, that failed. I have network spikes every few minutes. I'm using a windows vista computer (though this also happens wi

  • Exchange and mail.app

    Has anyone had this issue with a MS Exchange server? On a Mac I am able to send mail out to any email address using Outlook Web Access but using the same exchange server with a POP account and Mail.app I cannot send mail outside the school district(@