Recommendations for Oracle server regarding installation of Hyperion S9

Hello,
Can you please tell me where I can find some information concerning (hardware) recommendations for an Oracle server to be used to host Hyperion system 9 products?
In other words, I would like to know the recommendations for configuring a machine with Oracle 10g.
Many thanks!
Best Regards,
Andy

Try the Start Here guide:
[http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/hsys9_install_start_here.pdf]
Regards,
Imran

Similar Messages

Hardware recommendations for Oracle server

I'm looking for hardware recommendations for a new Oracle database server. I'd like to have Active/Passive redundancy, so I imagine an external storage device is necessary. Does Oracle publish any hardware recommendations based on budget? I'm not sure what our budget would be but I can assume two database servers and a single external storage device in the $20k range.

Oracle does not publish any recommendations at all.
If they did, the recommendations would be based on load and expected performance characteristics, not based on budget.
Your best bet is to chose a vendor (Sun, IBM, HP, Dell) and ask them. Each of those vendors has a group that specializes in answering this kind of question.

Note 830576 - Parameter recommendations for Oracle 10g

hi all DBA experts.
I am not good familiar with Oracle database while i read a Note 830576 - Parameter recommendations for Oracle 10g. in which SAP General Recommendation:
You should delete obsolete initialization parameters from the profile.
To determine which obsolete parameters are currently set, proceed as follows:
SQL> SELECT NAME FROM V$OBSOLETE_PARAMETER WHERE ISSPECIFIED = 'TRUE';
when i execute above command then result is no rows selected
while there are many parameters in above SAP Note which are already obsolete and not set in initSID.ora file.
for exp. the parameter OPTIMIZER_INDEX_COST_ADJ is showing
#### OPTIMIZER MODE
#optimizer_index_cost_adj = 10
as you know that this parameter is very important regarding System Performance.
now please guide me . I have to set these parameter or no need while there is not showing any parameters against obsolete command.
waiting you valuable reply.
Regards,

hi both,
thanks for knowledge sharing with me other SDN users,
Dear Orkun,
Ok. At this stage, I can recommend you that apply what they have suggested,
in the message. So, you already did a part of it by configuring
Oracle parameters, already.
SAP support sent me this file (PRD_Parameters)
*** INFORMATION 1 ***
*** INFORMATION 2 ***
*** INFORMATION 3 ***
*** INFORMATION 4 ***
*** INFORMATION 5 ***
*** INFORMATION 6 ***
*** INFORMATION 7 ***
*** INFORMATION 8 ***
*** INFORMATION 9 ***
*** INFORMATION 10 ***
*** INFORMATION 11 ***
_b_tree_bitmap_plans
_fix_control (4728348)
event (10753)
event (38087)
event (10183)
optimizer_index_cost_adj
star_transformation_enabled
event (10027)
event (10028)
event (10411)
event (10629)
event (14532)
_fix_control (5705630)
_fix_control (5765456)
_optimizer_mjc_enabled
_sort_elimination_cost_ratio
event (10091)
event (10142)
event (38068)
event (38085)
event (44951)
parallel_execution_message_size
parallel_threads_per_cpu
query_rewrite_enabled
log_archive_dest_1
log_archive_format
max_dump_file_size
optimizer_features_enable
log_archive_dest
_push_join_union_view
_cursor_features_enabled
_first_spare_parameter
event (10049)
db_writer_processes
parallel_max_servers
db_cache_size
pga_aggregate_target
processes
sessions
dml_locks
job_queue_processes
log_checkpoint_interval
remote_login_passwordfile
sga_max_size
shared_pool_reserved_size
sort_area_retained_size
sort_area_size
statistics_level
workarea_size_policy
they only highlighted these following parameters from above
**** INFORMATION 8 *** DB Patchset: 10.2.0.4.0
**** INFORMATION 9 *** DB Mergefix: 0 (released before 2008-07-11)
FYI... recently, i applied the Oracle Patches 10.2.0.4 in this sequence
MS Windows x86-64 (64-bit)
Patchset_10204_MSWIN-x86-64aa.bin
Patchset_10204_MSWIN-x86-64ab.bin
Patchset_10204_MSWIN-x86-64ac.bin
OPatch
OPatch_10205_Generic_v0.zip
Generic (32-bit / 64-bit)
p8350262_10204_Generic.zip
p7592030_10204_WIN_GENERIC.zip
p9254968_10204_WIN_GENERIC.zip
10204_Patch44_MSWIN-x86-64.zip
p9584028_102040_Generic.zip
p9843740_10204_Generic.zip
and please tell me , still i have to apply highlighted parameters or now no need.
Regards,

Is it possible to query software inventory report for Oracle SQL developer installation?

Hi all
My company requires to generate a report of all kinds of Oracle database access tool. I can find Toad installation from Add/Remove Program and therefore can query for Toad.
However, Oracle SQL developer is using Java. I cannot see an entry for Oracle SQL developer from Add/Remove Program. Is there a way to query inventory for Oracle SQL developer installation?
Thanks a lot.
Regards
Lic

You might be able to use software inventory to report on the version of sqldeveloper.exe.
As the app looks like just a zip you extract to a custom location that might be one method.

Parameter recommendations for Oracle 10g?

Hello,
This note 830576 contains sap`s recommendations for Oracle 10g, but the some parameter information during EarlyWatch Alert do not follow Sap standard recommendations Are not in that note.
These parameters are no longer used?
Can be removed?
Which I attribute value? The note does not have the parameters and values.
Those are the parameter:
pushjoin_predicate
db_block_checksum
hash_join_enabled
log_archive_start
max_rollback_segments
transaction_auditing
Regards,
Antonio Júnior

Hi,
this Parameters is used in older oracle version <10g
pushjoin_predicate : No need to set in 10g
db_block_checksum : Note 923919 - Advanced Oracle block checking features
hash_join_enabled : No need to set in 10g
log_archive_start : No need to set in 10g
max_rollback_segments : No need to set in 10g
transaction_auditing : No need to set in 10g
regards,
kaushal

Problem installing ODAC for Oracle Server 11g

I have installed Oracle Server 11g (OS:Windows XP)
Questions:
1. I tried installing ODAC for Oracle Server 11.1.0.6.21, then its giving the following error message: "Oracle data access components can only be installed over an existing oracle server 11g".
2. We have a Monorail application running on NHibernate using ODP.NET. It's working perfectly when I run it on my Visual Studio 2008.
But, when I tried to host this application, it gave me the following error message: "The provider is not compatible with the version of Oracle client"
Please suggest how to resolve these issues.

Hi
Could that be related to the %ORACLE_HOME% ?
I've read that on the ODAC installation guide:
On a machine without Visual Studio .NET 2003 installed, ODAC products now work if they are installed in a new Oracle Home
So it should be performed in a new %ORACLE_HOME% and not the same as the database. Please change that and retry.
Source:
http://www.oracle.com/technology/software/tech/windows/odpnet/install11106.html
On your second question :
Q: I get an error: "Unable to load DLL (OraOps.dll)". How do I fix this?
A: First, ensure the OraOps.dll file is in your Oracle bin directory (e.g. d:\oracle\ora92\bin\). Next, check that your Oracle bin directory is in the Windows system path. If either of these are not present, re-install ODP.NET. Depending on the application, you may have to restart the application (e.g. Windows Service) or reboot the computer (e.g. ODP.NET install makes changes to the PATH) for ODP.NET installation to be complete. If your ODP.NET installation is still not working, you may be running into this problem.
Source:
http://www.oracle.com/technology/tech/windows/odpnet/faq.html#DLL
Let us know if it helps?
thanks
Edited by: Hub on Oct 23, 2008 9:30 PM

Is RAID 5 not recommended for Oracle database ?

- I am planning to install Oracle database
Here are the specs:
- Dell PowerEdge T610 server
- Windows 2008 R2 (64-bit )
- 24 GB memory
- Oracle 10g database (64-bit database)
- Our database is for an ERP based client server application
- Will have around 35-45 users
- Will have around 150-200 transaction per day ( 8AM-5PM) only database
- database would be around 10-15GB (data files)
Now I am planning to buy the hardware server, I heard that RAID 5 is not recommended for Oracle database.
Is it true ?
What do you recommended for Oracle database ? RAID 5 (or) RAID 1

johnpau2013 wrote:
I heard that RAID 5 is not recommended for Oracle database.
Is it true ?Kind off... as Oracle (as per the RAC Starter Kits for example) explicitly recommends SAME - as in Stripe And Mirror Everything.
This is a combination of RAID1 and RAID0.
However, you will also get whitepapers from storage vendors like EMC in partnership with Oracle, that explains how to configure and use RAID5 storage and how effective this is. And as some will tell you, RAID5 can work just fine with Oracle... and some others will grimace and tell you how bad an idea that is from personal experiences.
In a nutshell - RAID5 requires a parity calculation on each write. That is a very expensive overhead if that calculation impacts the fwrite() (file write) command of a process writing data to disk. It significantly slows down the write operation.
However, if that parity calculation is done asynchronously and does not effect the elapsed time for a fwrite(), then a fwrite() to RAID5 is as fast or as slow as it would be to RAID10 for example.
Unsure how many modern storage system supports off-loading the parity calculation and not impacting the write I/O call. This can be done using ASICs (Application Specific Integrated Circuits), specialised s/w on the storage server, etc.
Whatever you put in place - test the RAID config thoroughly up front and ensure that performance is up to specs. There's a utility called fio (<i>Flexible I./O</i>) written by a Linux kernel hacker that works for Oracle. It is an excellent utility to use to generate and test I/O - but it is Linux and Unix based.
Any specific reason using Windows? Linux is by far a more predominant 64bit operating system than Windows, and has significant higher market share in Oracle RDBMS than Windows. Given the fact that over 93% of the 500 fastest computer systems on this planet runs Linux, I'm always kind of amazed that some would still use Windows as a server-side o/s for Oracle.

SAP Note 830576 - Parameter recommendations for Oracle 10g

As per SAP Note 830576 - Parameter recommendations for Oracle 10g, I have tried to change the value for
parameter "db_file_multiblock_read_count".
In sql prompt it shows:
SQL> show parameter DB_FILE_MULTIBLOCK_READ_COUNT
NAME                                 TYPE        VALUE
db_file_multiblock_read_count        integer     128
and in brtools it shows:
58 - db_file_multiblock_read_count      both     no      *       yes   128
But I got the following error, when i tried to set it null
1 * Parameter description (desc) ..... [db block to be read each IO]
2 * Parameter type (type) ............ [integer]
3 * Current parameter value (parval) . [128]
4 * Value in spfile (spfval) ......... []
5 # New parameter value (value) ...... [null]
6 - Scope for new value (scope) ...... [both]
7 # Database instance (instance) ..... []
8 ~ Comment on update (comment) ...... []
9 - SQL command (command) ............ [alter system reset db_file_multiblock_read_count scope = spfile sid = '*'; alter system reset db_file_multiblock_read_count scope = memory sid = 'MBD']
BR0662I Enter your choice:
c
BR0280I BRSPACE time stamp: 2008-08-14 18.19.22
BR0663I Your choice: 'c'
BR0259I Program execution will be continued...
BR0280I BRSPACE time stamp: 2008-08-14 18.19.23
BR0301E SQL error -32010 at location BrSqlExecute-1, SQL statement:
'/* BRSPACE / alter system reset db_file_multiblock_read_count scope = spfile sid = '''
ORA-32010: cannot find entry to delete in SPFILE
BR1017E Execution of SQL statement 'alter system reset db_file_multiblock_read_count scope = spfile sid = '*'; alter system reset db_file_multiblock_read_count scope = memory sid = 'MBD'' failed
BR0669I Cannot continue due to previous warnings or errors - you can go back to repeat the last action
BR0280I BRSPACE time stamp: 2008-08-14 18.19.23
BR0671I Enter 'b[ack]' to go back, 's[top]' to abort:
Kinldy let me know, what could me wrong.

Hi Markus,
As per your suggestion we have downloaded the files from UCLIB_3-20000978.SAR. But now getting the error as
sapccmsr -DCCMS -j2ee pf=profile value
INFO: use SAPLOCALHOST hostname
INFO: CCMS agent sapccmsr working directory is /usr/sap/ccms/XX1_00/sapccmsr
INFO: CCMS agent sapccmsr config file is /usr/sap/ccms/XX1_00/sapccmsr/csmconf
INFO: Central Monitoring System is [XX1]. (found in config file)
INFO: additional Central Monitoring System is [AS2]. (found in config file)
ERROR: Cannot open Monitoring Segment 0 rtc = 245
Last reported error: [249] CCMS monitoring segment has wrong EYE CATCH. It seems to be created as non-unicode segment.
This program runs as unicode. Please use non-unicode version
Please suggest
Thanks,
Anu

What is the best platform for Oracle Server?

What is the best platform for Oracle Server?
What is your criterion?
Thanks,
Somsak B.

I believe that Oracle is developed and coded on a Solaris
platform and then ported to other operating systems. If that is
the case, you can assume that Solaris is the best platform or at
least the safest in terms of performance and risk.
If anyone knows anything to the contrary, pls correct me.

Any equivalent for "Oracle9i Database: Seminar Series for Oracle Server"?

Dear all
I'm interesting on the Oracle course named "Oracle9i Database: Seminar Series for Oracle Server" - [D16665GC10|http://education.oracle.co.uk/html/oracle/68US/D16665GC10.htm]
AFAIK as Oracle 9i is unsupported, I don't belive that I can find this course available anywhere. So my question is: "Is there any equivalent for above course for 10g/11g?"
Thanks in advance

Kamran Agayev A. wrote:
Dear all
I'm interesting on the Oracle course named "Oracle9i Database: Seminar Series for Oracle Server" - [D16665GC10|http://education.oracle.co.uk/html/oracle/68US/D16665GC10.htm]
AFAIK as Oracle 9i is unsupported, I don't belive that I can find this course available anywhere. So my question is: "Is there any equivalent for above course for 10g/11g?" Yes, those are excellent materials. A lot of the material is covered in the DBA 1 & 2 courses, but not as focused and not as 'in depth'. I encourage that you write directly to Oracle University and ask them to upgrade the seminar. (Tell them I'd be happy to update/deliver it. ;-))
An alternative, and possibly even better, is to watch for (or ask for) a local presentation by Jonathan Lewis and/or Cary Millsap (Method R)
/Hans

Help go count hardware for oracle server

Hi,
I need to count hardware for Oracle server;
users obout 10000 people at the same time.
What memory(RAM) and proceesos frequens(MHz) should be?
Where to find information about it?

You should consider that if 10000 users will be concurrently in the database, and if at least 2m ram will be consumed by an oracle server process (just to start), then 20000mb ram will be required (at least) to support 10,000 oracle processes at the same time, about 20Gb for users, next, consider the amount of required SGA memory (not an exact value, as it depends on the database profile, DWH, OLTP, Hybrid). plus the processes for the regular OS operation.
This is not a small application, have you thought about growth? You should be thinking about scaleability. May be not a huge machine, but a cluster of more affordable machines that will grow with your needs.

Dynamic column name for Oracle Server Procedure

hello,
May be it's not a right place for my question, but I hope that some of you can help me.
I have source table A that has data of the same kind in 62 fields, let's say employee count for 62 departments. I do some processing with these counts(sum(emp_count) of the same departments for different locations) and store these counts in the variables EC1, EC2, EC3 .. EC62.
Then I need to insert them into my table that has very simple structure let's say table B (dept_no Number(3),
emp_count Number(6))
I want to do a loop and use dynamic colunm EMP_COUNT, something like this:
FOR k in 1..62 LOOP
EMP_COUNT := 'EC'| |k;
IF EMP_COUNT <> O THEN
insert into B
VALUES ( K , EMP_COUNT);
END IF;
END LOOP;
I understand that I need to take a Value of my dynamic colunm EMP_COUNT. Is it possible to do in Oracle Server Procedure? Any idea?
Any help will be apreciated.
null

After having worked in other environments where you can manipulate data records with postitional parameters, Oracle can be frustrating because it demands the explicit use of field names in DML/Select statements. A way around this is to use DBMS_SQL or Dynamic Sql. I have used DBMS_SQL to create and execute dynamic statements with great success. Since you are creating, compiling, and running a dynamic block every time you execute your procedure, this is not recommended except in the rare instances when there is no better way around it.
Oracle8i introduces native dynamic SQL, an alternative to DBMS_SQL. Using native dynamic SQL, you can place dynamic SQL statements directly into PL/SQL blocks.
In most situations, native dynamic SQL can replace DBMS_SQL. Native dynamic SQL is easier to use and performs better than DBMS_SQL.
Example of Dynamic SQL<------------------------
BEGIN
-- bulk fetch the list of office locations
SELECT location BULK COLLECT INTO loc_array
FROM offices;
-- for each location, give a raise to employees with the given 'job'
FOR i IN loc_array.first..loc_array.last LOOP
dml_str := 'UPDATE emp_' | | loc_array(i)
| | ' SET sal = sal * (1+(:raise_percent/100))'
| | ' WHERE job = :job_title';
EXECUTE IMMEDIATE dml_str USING raise_percent, job;
END LOOP;
Look for more information on dynamic SQL by
searching for DBMS_SQL.
Good Luck
null

Hardware sizing recommendations for B2B Server

My customer Welch Foods Inc. is on 11i Oracle eBusiness Suite and is planning to uptake the latest 1Sync integration features in the PIM product. For out-of-box AS2 connectivity with 1Sync - they are planning to use Oracle B2B Integration Server 10.1.2.3.
They have an average transaction volume of 30 transactions per month. One time - initial load of 20,000 transactions.
Based on the above estimates, they are looking for hardware sizing recommendations for the B2B server.
Your assistance is much appreciated.
Asmi Maharishi
SDM for Welch Foods.

Thanks for your reply!
Here are the responses to your queries:
1. Is B2B instance going to run alone in a box
Yes, B2B instance will run alone on a box.2. what will be the size of message
Messages can be anywhere from 5-20 KB3. how many messages will be part of a transaction.
It should be 2 - Registration and publication. But sometimes it depends on how successful the first “registration” goes. Typically we get one or two errors that the users go into PLM, correct and re-send.However, Looking at your current requirement, 30 transaction per month, we can easily address in a 4 GB machine itself.
Additionally, Oracle B2B supports 10+ messages per second in 32GB, 4 processor machine.
Memory suggested above is 4GB, does that take into account memory used by the 10G App server foot print or this is only to take care of messages? Also, how many Processors (Risk IBM) will be needed?

Recommendations for Oracle Lite

I am new to Oracle. Please post recommendations for
1. Oracle Lite on line help sites
2. Oracle Lite on line tutorials
3. Oracle Lite on line hosting company with JSP
(possibly a free host for trial)
4. Do you recommend this product for Windows XP?
5. Do I need any patches to make it work on Windows XP?

Try the Start Here guide:
[http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/hsys9_install_start_here.pdf]
Regards,
Imran

No GUI after reboot for Oracle Linux 6 installation

I am trying to resolve an Oracle Linux 6.2 (64 bit) installation issue. I selected Oracle Linux server default setup and after the reboot, the X-Window or KDE GUI graphical
interface does not come up. Instead, I get a command line prompt. Any idea how to resolve this issue to get an Oracle Linux 6 installation with graphical interface?

875554 wrote:
I am trying to resolve an Oracle Linux 6.2 (64 bit) installation issue. I selected Oracle Linux server default setup and after the reboot, the X-Window or KDE GUI graphical
interface does not come up. There is no GUI by default on Oracle Linux 6, you need to specifically select one during install. There are PLENTY of topics about this, so perhaps try searching for an issue first, next time?

Recommendations for Oracle server regarding installation of Hyperion S9

Similar Messages

Maybe you are looking for