Recommended image size and dimensions for images displayed on iPad retina?

What are the recommended dpi image size and dimensions for images designed in DPS app as displayed on an iPad retina?

Take a look at the following link:
http://blogs.adobe.com/indesigndocs/2012/03/guidelines-for-creating-folios-for-ipad-3.html

Similar Messages

Checking Image Size and Dimensions

How do I check the size of an image like a Signature or another image without having to save it and then checking it? Is there a way to check it in Safari?

What? I don't see "Inspect Element" anywhere.
Are there any plugins (perhaps at pimpmysafari.com) where we can add functions such as "Properties" for viewing image size and dimensions, as well as "View Image" to view the image by itself? I'm trying to convert from Firefox, but these are a couple of the things getting in the way.

Image size and dimensions in Safari

Is there a fast method of viewing image size and dimentions in Safari? I can open image in new tab and see its width and height in tab/window name. I can save image to the Desktop and see file size but it's not convenient. Is there some another way without opening an saving image somewhere like Control+click -> Properties?
iMac G4 Mac OS X (10.4.3)

Pat,
You don't need to set the image size as such. The image prints on the page according to two sets of criteria:
1. Whether you set dpi to custom or a specific value, and
2. The page margins you set either as a printing once-off, or as a new printing pre-set.
For example, I print "arty" photos in a portrait format on A4 matte paper. Left and right margins are around 3cm, top margin is around 3cm, bottom margin is around 5 cm (all numbers are from memory...). I have a title just below the image.
I created this particular page setup for a certain photo and liked it so much I saved it as another print preset. Any photo I print using that preset fits within the margins defined. The very next print might be the same photo, but this time printing A3+ on Ilford Galerie Smooth Pearl. Choose the photo, select the relevant print pre-set, print. Re-sizing is irrelevant - the print in both cases is coming from the processed raw at maximum resolution.
Regards,
Calx

Is there and optimum photo size and resolution for use on the ipad?

Is there an optimum photo size physical and resolution for use on the Ipad.

It depends on whether you want to zoom in the image. If you don't, pre-converting them to the native screen resolution of your iPad 2, 1024*768 (assuming 4:3 aspect ratio, as is the case with most Point and shoot (but not DSLR, which, generally, use 3:2!)) will make sureyou use the least storage and will always have the fastest file transfer.
If zooming is important and you have pictures over 16 Mpixels you want to fully zoom in, then, you'll need to use third-party apps like Photo Manager Pro (review: http://www.iphonelife.com/blog/87/all-one-photo-viewer-roundup-70-price-drop-bes t-image-viewer ), which doesn't downsize your pics and doesn't use much more storage than it should.
Let me know if you have further questions.

Image size and format for IMovie

I am trying to make a short stop motion animation in IMovie. I have made my images in Adobe illustrator. I transfer the images into IMovie as JPEGS.the images, which are basically line drawings, look sharp and clean but as soon as you watch them as moving pictures they become broken up.
what am I doing wrong? does this have to do with my image size or format?

iDVD will try to downsize the image to work, but your TV often will overscan with the result being edges clipped off. The amount of clipping can vary, so the "TV Safe" settings will typically be the center 80-90% of the image. So, if you add a border that makes the image 10-15% larger, that should display the whole image. For example, if you had a 150 dpi image that was 640x480, you could put a 10% border on it so the final image was 704x528.
John

Image size and dpi for iDVD menu custom background?

I created a custom background for my iDVD menu. When showing
on my TV, part of the words and image is cut off on each side, even after adjusting my tv picture between wide screen and standard screen.
What is the correct size and dpi to make a photograph to use as a background
image in the menus? This may have been answered before, so I apologize for posting the same question, if so.

iDVD will try to downsize the image to work, but your TV often will overscan with the result being edges clipped off. The amount of clipping can vary, so the "TV Safe" settings will typically be the center 80-90% of the image. So, if you add a border that makes the image 10-15% larger, that should display the whole image. For example, if you had a 150 dpi image that was 640x480, you could put a 10% border on it so the final image was 704x528.
John

Image Sizes and Resolution standards?

are there any standards for image sizes and resolution for mobile games specifically: backgrounds and backdrops?
i will be porting my game for various cell phones and i'd like to resize images to fit perfect on all cell phone screens, so what would be the best way to do this and what should my image attributes (height, width) be?
i've tried researching on google to see if there were any standards and couldn't seem to find any. if these standards are non-existent what image sizes have you used that you found worked best on various mobile phones?
thanks
Edited by: sassy on Jun 2, 2008 1:49 PM

Google's right, there are no real standards for screen sizes. Some are more common than others, but there are dozens of common screen sizes.
The most common are...
176x208 (same as 176x220, but with no status bar)
240x320
176x220
[Getjar resolution stats|http://www.mobref.com/statistics/world/gDispResolution]
Unfortunately, many phones are slightly more or slightly less than those. If you cover those, you're fairly well off though. If you can make your game resolution independent, that's your best option, though with intricate overlays it may be nearly impossible to do.

How do I non-destructively sharpen, re-size and save my images if I'm using both LR & CS6?

Hi guys {and gals}...
Ok... here is my dilemma. I am having an incredibly difficult time understanding the best way to sharpen, re-size and save my images for both posting on the web and giving them to clients. I completed my first paid photo shoot (yay!), but as I finished editing each image, I re-sized it and posted it on my FB photography page. I later learned from a fellow at my local print shop that this is a destructive and irreversible edit (not yay! ).
So... before I pull out every last strand of hair on my head, I REAALLLYYYY need to get a good grasp on how to do the following things so that I can establish a good workflow: 1. Sharpen my image well {w/ Smart Sharpen}. Does this have to be done on a flattened image... and isn't flattening irreversible? 2. Re-sizing my images for both web display and client work/printing. Is it true that once I set it to 72ppi for web display, that I lose a great deal of the detail and quality? Do I need to create a copy of the file and have 2 different image sizes?
I am self taught, learning off the cuff through tutorials and constant error... and I just want so badly to have a smooth and beneficial work flow in place.
Currently, my workflow is as follows... 1. Load images into LR and convert to DNG files 2. Quick initial edit & then send into PS CS6 3. Perform detailed/layered edit(s) 4. {I know I'm supposed to sharpen now, as the last step, but am afraid to permanently flatten my image in case I want to tweak the layers later..} 5. Save the file (unflattened) 6. Go back into LR and Export the file to the appropriate place on my hard drive
So... at this point, my image is still at 300ppi {not appropriate for web display}, unflattened {I'm told flattened images are ideal for client work and printing} and not as sharp as I want it to be {because I don't know when to apply Smart Sharpen filter}.
HELP!!!!!!!
Thanks in adavnce for "listening" to me ramble...
~ Devon

There are a lot smarter guys on this forum than I so will let them give you ideas on the sharpen workflow.
Is DNG the same as RAW in that all the edits are non-destructive? With RAW all the edits are put on a separate XMP file and believe with DNG the XMP file is written to the image. In this case would suggest you save the DNG then create a jpg to send to clients or on web. A jpg will not save layers so it is by its nature flattened.
Since you are new to this try this test to understand ppi. Click on Image/image size.
      Change Document size to inches.
      Now uncheck "unsample image" as if this is checked all the pixels will be modified to adjust to the new size. Unchecked no pixels will be changed.
      Now adjust the resolution from 72 to 300 ppi (pixels per inch). Note that the Image Size in pixels does not change, but the document size changes. This means resolution is unchanged.
      Now click "resample image" and change the resolution. Note how the image size changes and document size stays the same.
Bottom line quality of picture is the image size in pixels. THe larger the numbers the higher the quality.

Image size versus dimension

I am just trying to get my head around image size versus dimension and an answer to my following question may solve it once and for all! I save a jpg say at 1000 pixels wide and at 100 ppi at file quality 10. But if I save the same file at 1000 pixels wide and again at 100 ppi but this time at quality 5 - what is happening to the file? I have the same number of pixels in the photo but what is the quality slider actually doing?
Many thanks
Sue

21st century or not, if you are talking about file integrity, nothing beats an EPS. Although as stated previously, EPS has definitely fallen out of popularity, partly I think due to cross-platform issues -- i.e., PC's inability to deal with them (talk about archaic) and partly due to hosting applications current ability to accept native files. EPSs are totally encapsulated, totally lossless, and totally impervious to hosting software interference -- which TIFFs, JPEGs, nor PSDs can boast. Basically, WYSIWYG.
And yes, there actually are instances where you DO just re-save files -- usually in an attempt to clean up corrupt or problematic files -- but not just for the sake of re-saving. I agree, nobody does that. I was just making a point.
I'm not advocating JPEGs and by no means do I advocate the constant re-saving of them. But I will not discount them as fodder or relegate them strictly to the internet! They are simply another tool in the toolbox. I do agree with you that saving as JPEG should be the last step in the production process. In addition, a full-bodied backup should be kept in reserve (be it TIFF, PSD, or heaven forbid, EPS).
My original point was to address Sue's question of "Image versus Dimension" in JPEG format. My point with you is that JPEGs definitely have a place and some advantages when a balance of quality versus file size/storage space is an issue. It is ridiculous to simply discount JPEG to the web. Although I would not use it for a high-end brochure or an annual report, I wouldn't hesitate for a second to use JPEG for newsprint, high-end copying and some direct imaging. It is a sound format if applied properly based on the end usage. But by no means is it an end-all format. And, I think I work in the same world as you.

How do you change the image size and resolution in photoshop everytime I change the width the height changes my measurements will not stay

Can someone assist me with changing image size and resolution. each time I change the width the height changes and vice/versa?

There's a chain link between width and height. The point is to keep the aspect ratio the same, otherwise your picture would get stretched.
You click on the chain-link to shut that off and you can adjust width and height separately.
Also could you give us your version of Photoshop, what OS you are running it on (Windows 7 for example) and what exactly you want to do with your document?
Resolution is the print term for how many pixels will be printed on an inch of paper. It doesn't apply if your image is intended for screen viewing.
Gene

Reduce image size and print it out?

I scanned an image (coloring on a postcard). This size is too big to fit into a 'album' picture in MS Picture It! All I want to do is REDUCE the image and save it so that it will fit into the computer photo album I'm creating.
I've tried Image/Resize/Image Size and changed the sizing, but it still comes out the exact same size as the original. What am I doing wrong?

> I want to REDUCE the image, not enlarge it.
I understood that - what makes you think I didn't?
> It's 948x645 pixels. I just want the image about an inch (respectively) smaller
You can't think in terms of inches for screen images. You have to work in pixels and the actual size will depend upon the screen resolution on the machine being used to view the image.
I'd reduce the pixel size by about 80 to get the effect that you want. Use Image/Resize/Image Size and make sure that you have "Resample" checked.

Image size and type

what Icon / Image size and type we should use of our own menu ?
Giuseppe

Hi Giuseppe,
I'm not sure what restrictions there are on image type but I always use a 24bit Bitmap image with width 18px and height 14px. For transparency, set the background colour to RGB 192-220-192 and SBO will automatically make this area transparent, regardless of the colour scheme the user has on the client.
Kind Regards,
Owen

How do I find the image name and media_link for an ubuntu image in the Gallery?

I am trying to create VM using Python API.
I have a custom Linux image:
image_name = 'cloudN-Azure-20150205-os-2015-02-05'
media_link = 'https://portalvhds10ssz63zgvb9g.blob.core.windows.net/vhds/cloudN-Azure-20150205-os-2015-02-05.vhd'
When I used this image to create VM, it failed.
I would like to use the ubuntu 1204 image in the Gallery.
How do I specify the image_name and media_link in my Python code? Basically, where and how do I find the image name and media_link for an image in the Azure image Gallery?
Thanks in advance...

hi sir,
Did you try to use "List OS Image"? we can get the property form the results:
result = sms.list_os_images()
for image in result:
print('Name: ' + image.name)
print('Label: ' + image.label)
print('OS: ' + image.os)
print('Category: ' + image.category)
print('Description: ' + image.description)
print('Location: ' + image.location)
print('Affinity group: ' + image.affinity_group)
print('Media link: ' + image.media_link)
print('')
Please try it. Any questions or it doesn't work, please let me know.
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Access image size and color profile

Hi all,
Is it possible to access image size and color profile ? If not, will it be possible in CS6 ?
Thanks.

Load the external XMP library and get it from that?

Set-up custom font, font size, and color for writing new and reply e-mails in Thunderbird

I know that I can select the font, size, and color for writing each new and reply e-mails in Thunderbird, but I don't want to have to do this each time. I want to set-up the default font, size, and color for all new and reply e-mails. It already comes up with a default one, but I want to change it, but can't figure out how to do this. I'm sure it is quite simple, but I don't know how to do this. Thank you in advance for help.

Tools > Options > Display > Formatting tab
Default font: select font
Select size : eg; 14
Click on 'Advanced' button and set all the sizes to 14
Select : 'allow messages to use other fonts'
click on OK
Click on 'Composition'
Under the 'General' tab
Suggest you set HTML font to 'Variable width' and Size : 'Medium'
Select the 'Text colour' you would like to compose email using
Select the 'Background colour' you would like to use when composing emails.
click on OK to save all changes.
This will set the display email list to the selected font.
It will allow received emails to use the font the sender used.
When you compose an email it will also use the same font settings.
The message 'Display' settings in the above section also apply to messages that you compose. The settings are not sent, so they do not affect how your messages appear to recipients.
The settings in the ''Composition' section can affect how messages are sent. If you make unusual choices, then people who receive messages from you might find them difficult or impossible to read. Hence, why I suggest you leave it as 'Variable width' and allow the 'Display' settings to set the default used for composing emails.
More info:
* http://kb.mozillazine.org/Font_settings_in_Thunderbird

Recommended image size and dimensions for images displayed on iPad retina?

Similar Messages

Maybe you are looking for