Recommended IOS XE version for Cisco Catalyst 4500X-16 SFP+ Switch
Could someone confirm IOS XE version for Cisco Catalyst 4500X-16 SFP+ Switch please.
It already has 03.06.00.E on it. I am planning to configure VSS on it with similar switch.
VSS will participate in various Etherchannels (MES).
Just wondering if there are any known bugs in this IOS XE release.
Use the Bug Search Tool to look for issues with vss, vsl, etc.
https://tools.cisco.com/bugsearch/
Similar Messages
-
Cisco Prime LMS 4.1 - Support for Cisco Catalyst 3560-C Series Switches
Hello together
I have a customer which uses the following switch. Last year I have installed LMS 4.1 for him to manage the switches. Unfortunatly the switch model is not supported. According to the information found on the following site the switch is supported for most of the modules in LMS:
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/4.1/device_support/table/lms41sdt.html
The oid object of the device is the following: 1.3.6.1.4.1.9.1.1465
Supported Software: 12.2(55)EX (Customer has 12.2(55)EX3
Version Support Type: Device Update
So I updated all device updates I was able to find.
Step 1: For that I went to Admin > System > Software Center > Schedule Device Downloads and created a job where I have downloaded the latest versions of all packages.
Step 2: Installed the downloaded packages Admin > System > Software Center > Device Update and installed all the packages.
Unfortunatly I don't see the same result like described in the Supported Device Table for LMS 4.1.
- Cisco View -> works
- Inventory and Config Collection -> works
- Fault Monitor not working -> Error Code Unsupported
- Network Topology Layer 2 Services -> Device Type ciscoProducts.1465, Symbol Question Mark
- VLAN Management -> Doesn't work
- User Tracking > seems also not to work
When I open the report for supported devcies (Reports > System > Device Support) and search for C3560C... I find the following devices, but not mine which i need:
C3560C-8PC-S .1.3.6.1.4.1.9.1.1466
C3560CG8PC .1.3.6.1.4.1.9.1.1317
C3560CCG8TC .1.3.6.1.4.1.9.1.1318
wsC3560CPD8ptS .1.3.6.1.4.1.9.1.1368
Does anybody have experience with the same switch type / model? Am I doing something wrong or is this type of switch not implemented correctly till now? Further the docuemntation supported devices would be wrong.
Thanks for any feedback ErichThanks but I just heard back from my Cisco SE and he assures me that an AP will NOT use up a license.
I've asked him to verify his answer for me.
Is your answer based on real world expereince (the best there is)? That is, are you running Prime LMS 4.1 and does it indeed use up a license for each light-weight AP it discovers & manages?
Thanks for mentioning options 1-3 but I do not wish to employ any of them. I don't mind buying the additional licenses for APs ... I just need to know if I have to or not.
Ian. -
Last version Cisco Catalyst 2960-24PC-L Switch (bugs study)
Hi team,
I need know, what´s the last IOS version to Cisco Catalyst 2960-24PC-L Switch and understand the bug study about these versions?
How make a bug study?
If you have any information, please let me know.
Regards,
Yerko.Latest release as of January 14th is 15.0.2-SE5 (Release Nov 6, 2013)
There aren't any public utilities in the Cisco website that provides you with a bug study.
We have a bug tracker https://tools.cisco.com/bugsearch/?referring_site=popular but it will be extremely time consuming to identify each bugs and if you are affected.
If you are a Cisco Advanced customer with optimization services in your contract, this deliverable can be done for you at no cost. -
I am trying to download the update IOS 5 version for mi ipad 2 and at the end when it finishes downloading it shows an error "connection has been interrupted and that the task could not be completed", my internet service is fine, what can it be?
The 2nd generation can not be upgraded beyond 4.2.1.
-
I want to know my previous ios firmware version for iphone 4s because now I am using latest ios version 7.2 and I want to downgrade it but I don't know the previous version exactly for iphone 4 s
The iOS is 6.1.3, problem is Apple will not sign the file through iTunes to install it on the iPhone 4S.
-
FUS Image version for Cisco 3702 AP
Dear Team,
What is the minimum version of Field Recovery image in WLC for Cisco 3702 series ..?
I have 6.0.182.0 version.. Is that supported..?
Note: I already upgraded WLC code to 7.6.120.0.We recommend that you install Release 1.9.0.0 of Cisco Wireless LAN Controller Field Upgrade Software (FUS), which is a special AES package that contains several system-related component upgrades. These include the bootloader, field recovery image, and FPGA/MCU firmware. Installing the FUS image requires special attention because it installs some critical firmware. The FUS image is independent of the runtime image. For more information, see http://www.cisco.com/en/US/docs/wireless/controller/release/notes/fus_rn_OL-31390-01.html .
http://www.cisco.com/c/en/us/td/docs/wireless/controller/release/notes/crn76mr02.html -
GRE tunnel feature limitation on Cisco Catalyst 4500X
Hi,
I have a customer with three sites. They have the Cisco catalyst 4500-X at each sites and wish to create GRE tunnels between each of these switches.
I have a vague reference which tells me the Cisco cat 4500-x or any cat 4500 for that matter does have severe limitations when GRE tunnels are created, especially limiting the bandwidth to 70kbps. Its also not recommended for data traffic but control plane traffic.
Please advice.No experts to answer this?
-
VMware tools and hardware version for Cisco vWLC
I am currently running a Cisco vWLC (v8.0.100.0) on VMware vSphere 5.5U2 supporting about 20 APs. I just recently upgraded to vSphere 5.5U2 and I was working my way through updating the VMware tools and VM Versions on all my VMs when I glanced at this info for the vWLC. The vWLC shows a VM version of 1 with the VMware tools not running and not installed. I am curious if it is necessary or even possible to update the VMware tools and VM version for the vWLC. The vWLC is working perfectly fine and I have no issue with leaving well enough alone, but this just kind of peeked my curiosity as I really couldn't find any concrete answers in any online documentation. Does anyone have any insight on this matter?
If it's working, then leave it alone. Some of the Cisco virtual, well maybe most, don't support the VMWARE tools. Updating the version to the latest will make you have to use vCenter as the sphere client will not allow you to edit the VM anymore.
-Scott -
I want to buy Cisco Catalyst 4500-X-16SFP+ and upgrade the license to Enterprise service. But license description show "IP Base to Ent. Services license for 16 Port Catalyst 4500-X". Is it means that only 16 port is Enterprise Service? If I add more 8 Ports module ,can it use Ent Service?
Please kindly advise.
Thanks,
ManoIs it means that only 16 port is Enterprise Service?
The license is in blocks of 16- or 32 ports. Let's say you purchase an Enterprise license for 16-ports and you got an optional 8-port module. You purchase an additional license of "C4500X-16P-IP-ES" and this allows you an additional 16-ports of license. You can't purchase a license for only 8 ports.
Cisco Catalyst 4500E Supervisor 7-E and 7L-E and Cisco Catalyst 4500-X Series Software Activation Licensing Deployment Guide -
Show version for Cisco Blocker
Hi,
As I am not really tech savvy here, we curently have an issue where we need to verify a serial number for Cisco Blocker. However, customer said they did not have a show version and instead provided us with the system status information. However, from it, we cannot derive the correct serial either. Is anyone familiar with how to interpret the system status to derive the correct serial for Cisbo Blocker? Or are there other options the customer can give us to get the correct serial?
I am attaching the system status provided by the customer.
Thanks,
CathyHi,
As
I am not really tech savvy here, we curently have an issue where we
need to verify a serial number for Cisco Blocker. However, customer
said they did not have a show version and instead provided us with the
system status information. However, from it, we cannot derive the
correct serial either. Is anyone familiar with how to interpret the
system status to derive the correct serial for Cisbo Blocker? Or are
there other options the customer can give us to get the correct serial?
I am attaching the system status provided by the customer.
Thanks,
Cathy
Cathy,
In the attachment you can able to see the serial number under the version area.
Hope to Help !!
Ganesh.H -
Can anyone recommend a good document for Cisco IDS and AAA
I need some basic tutorial for Cisco IDS and AAA. can anyone recommend any document for it?
thanksThe Cisco IDS/IPS senors do not perform any AAA functions. You can not validate a user/password externally.
-
Hi guys,
I am not sure if I am hitting IOS bug CSCtx61557
according to the bug tool this is the info:
crash after authc result 'success' from 'dot1x' for client (Unknown MAC)
CSCtx61557
Description
Symptoms: The switch crashes after logging "success" from "dot1x" for client
(Unknown MAC).
Conditions: The symptom is observed with the following conditions:
1. A switchport is configured with both of the following:
authentication event server dead action authorize...
authentication event server alive action reinitalize
2. The radius server was down previously, and a port without traffic (for
example: a hub with no devices attached) was authorized into the inaccessible
authentication bypass (IAB) VLAN without an associated MAC address.
3. The radius server becomes available again, and a dot1x client
attempts to authenticate.
Workaround: There is no workaround.
I am running the following IOS on my 4500X-16 SFP+:
cat4500e-universalk9.SPA.03.05.03.E.152-1.E3.bin
This is what I configured, and what happened:
HOSTNAME(config)#aaa group server radius rad_eap
HOSTNAME(config-sg-radius)# server name ACS1
HOSTNAME(config-sg-radius)# server name ACS2
HOSTNAME(config-sg-radius)# server name ACS3
HOSTNAME(config-sg-radius)#$ication login default group radius local
HOSTNAME(config)#aaa authentication login CONSOLE local
HOSTNAME(config)#aaa authentication enable default group radius enable
HOSTNAME(config)#aaa authentication ppp default local group radius
HOSTNAME(config)#aaa authentication dot1x default group radius
HOSTNAME(config)#aaa authorization exec default if-authenticated
HOSTNAME(config)#aaa authorization network default group radius
HOSTNAME(config)#aaa accounting update newinfo
HOSTNAME(config)#aaa accounting dot1x default start-stop group radius
HOSTNAME(config)#aaa accounting network default start-stop group
eption to IOS Thread:
Frame pointer 897BAE38, PC = 1C03EECC
IOSD-EXT-SIGNAL: Aborted(6), Process = Exec
-Traceback= 1#49176b00b95a50f3145e3825de17d470 c:1C008000+36ECC c:1C008000+3BE50 c:1C008000+3BF48 :1F679000+201A18C :1F679000+31CEE2C :1F679000+2C22958 :1F679000+2C293E4 :1F679000+1166260 :1F679000+2C3C20C
Fastpath Thread backtrace:
-Traceback= 1#49176b00b95a50f3145e3825de17d470 uld:1F224000+2DE8 uld:1F224000+2DE4 iosd_unix:1C3ED000+186A0 pthread:1AA69000+6450
Auxiliary Thread backtrace:
-Traceback= 1#49176b00b95a50f3145e3825de17d470 pthread:1AA69000+BB8C pthread:1AA69000+BB6C c:1C008000+F61E4 iosd_unix:1C3ED000+21270 pthread:1AA69000+6450
Buffered messages: (last 8192 bytes only)
6 left the port-channel Port radius
HOSTNAME(config)#aaa accounting system default start-stop group radius
HOSTNAME(config)#
HOSTNAME(config)#
HOSTNAME(config)#no authentication logging verbose
HOSTNAME(config)#
HOSTNAME(config)#
HOSTNAME(config)#login block-for 300 attempts 5 within 60
-channel1
*Aug 28 01:08:47.873 UTC: %C4K_IOSINTF-5-LMPHWSESSIONSTATE: Lmp HW session DOWN on slot 11 port 12.
*Aug 28 01:08:48.056 UTC: %SYS-6-LOGGINGHOST_STARTSTOP: Logging to host 172.16.5.98 port 514 started - CLI initiated
*Aug 28 01:08:48.571 UTC: %FASTHELLO-2-FH_DOWN: Fast-Hello interface Te2/1/12 lost dual-active detection capability
*Aug 28 01:08:49.099 UTC: %PIM-5-DRCHG: DR change from neighbor 0.0.0.0 to 172.16.250.61 on interface Vlan250
*Aug 28 01:15:08.753 UTC: %C4K_IOSINTF-5-LMPHWSESSIONSTATE: Lmp HW session UP on slot 11 port 1.
*Aug 28 01:15:24.759 UTC: %VSLP-5-VSL_UP: Ready for control traffic
*Aug 28 01:15:27.760 UTC: %VSLP-5-RRP_ROLE_RESOLVED: Role resolved as ACTIVE by VSLP
*Aug 28 01:15:27.760 UTC: %EC-5-BUNDLE: Interface TenGigabitEthernet2/1/1 joined port-channel Port-channel2
*Aug 28 01:15:28.049 UTC: %C4K_REDUNDANCY-6-DUPLEX_M
<Thu Aug 28 01:18:32 2014> Message from sysmgr: Reason Code:[2] Reset Reason:Service [iosd] pid:[6813] terminated abnormally [6].
Details:
Service: IOSd service
Description: IOS daemon
Executable: /tmp/sw/mount/cat4500e-universalk9.SPA.152-1.E.pkg//usr/binos/bin/iosd
Started at Wed Aug 27 22:27:48 2014 (647795 us)
Stopped at Thu Aug 28 01:18:32 2014 (115506 us)
Uptime: 2 hours 50 minutes 44 seconds
Start type: SRV_OPTION_RESTART_STATELESS (23)
Death reason: SYSMGR_DEATH_REASON_FAILURE_SIGNAL (2)
Last heartbeat 0.00 secs ago
PID: 6813
Exit code: signal 6 (no core)
CWD: /var/sysmgr/work
PID: 6813
UUID: 512
FAILURE: syslogd shutdown
I had a ICMP ping going, and it was not affected, as the Standby VSS chassis kicked in and took over, while the previous active chassis reloaded.
2nd time it happened:
Now this time, I had waited until the previous active chassis was back up and running and came back up as Standby hot.
once again I pasted the same config, and bang, It happened a second time on the second chassis which was acting now as Active supervisor.
And once again, the ICMP continuous ping was not interrupted, as the other chassis remained up, while the "new" active crashed after configuring the same configs in a slight different order.
HOSTNAME(config)#radius server ACS2
HOSTNAME(config-radius-server)#$5.22 auth-port 1812 acct-port 1813
HOSTNAME(config-radius-server)# timeout 1
HOSTNAME(config-radius-server)# key 0 XXXX
HOSTNAME(config-radius-server)#!
HOSTNAME(config-radius-server)#radius server ACS3
HOSTNAME(config-radius-server)#$xxxx auth-port 1812 acct-port 1813
HOSTNAME(config-radius-server)# timeout 1
HOSTNAME(config-radius-server)# key 0 xxxxxxx
HOSTNAME(config-radius-server)#
HOSTNAME(config-radius-server)#aaa group server radius rad_eap
HOSTNAME(config-sg-radius)# server name XXXX
HOSTNAME(config-sg-radius)# server name XXXX
HOSTNAME(config-sg-radius)# server name XXXX
HOSTNAME(config-sg-radius)#
HOSTNAME(config-sg-radius)#
PER-3-S
Exception to IOS Thread:
Frame pointer 89455E38, PC = 1CC27ECC
IOSD-EXT-SIGNAL: Aborted(6), Process = Exec
-Traceback= 1#e495ba4f9346cc1496eecd01ebf1814a c:1CBF1000+36ECC c:1CBF1000+3BE50 c:1CBF1000+3BF48 :20276000+201B18C :20276000+31D0DA8 :20276000+2C24800 :20276000+2C2B28C :20276000+11671B0 :20276000+2C3E0B4
Fastpath Thread backtrace:
-Traceback= 1#e495ba4f9346cc1496eecd01ebf1814a iosd_unix:1CFD6000+1C230 iosd_unix:1CFD6000+1C284 iosd_unix:1CFD6000+18854 pthread:1B653000+6450
Auxiliary Thread backtrace:
-Traceback= 1#e495ba4f9346cc1496eecd01ebf1814a pthread:1B653000+BB8C pthread:1B653000+BB6C c:1CBF1000+F61E4 iosd_unix:1CFD6000+21270 pthread:1B653000+6450
Buffered messages: (last 8192 bytes only)
INTF-5-TRANSCEIVERINSERTED: Slot=11 Port=3: Transceiver hasW-9(config-sg-radius)#
HOSTNAME(config-sg-radius)#no authentication logging verbose
HOSTNAME(config)#
HOSTNAME(config)#
HOSTNAME(config)#login block-for 300 attempts 5 within 60
been inserted
*Aug 28 01:26:03.864 UTC: %C4K_IOSINTF-5-TRANSCEIVERINSERTED: Slot=11 Port=4: Transceiver has been inserted
*Aug 28 01:26:03.864 UTC: %C4K_IOSINTF-5-TRANSCEIVERINSERTED: Slot=11 Port=5: Transceiver has been inserted
*Aug 28 01:26:03.864 UTC: %C4K_IO
<Thu Aug 28 01:28:10 2014> Message from sysmgr: Reason Code:[2] Reset Reason:Service [iosd] pid:[6770] terminated abnormally [6].
Details:
Service: IOSd service
Description: IOS daemon
Executable: /tmp/sw/mount/cat4500e-universalk9.SPA.152-1.E3.pkg//usr/binos/bin/iosd
Started at Thu Aug 28 01:13:52 2014 (60006 us)
Stopped at Thu Aug 28 01:28:10 2014 (993041 us)
Uptime: 14 minutes 18 seconds
Start type: SRV_OPTION_RESTART_STATELESS (23)
Death reason: SYSMGR_DEATH_REASON_FAILURE_SIGNAL (2)
Last heartbeat 0.00 secs ago
PID: 6770
Exit code: signal 6 (no core)
CWD: /var/sysmgr/work
are these the symptoms related to CSCtx61557 ?
I have tested this in a test environment, where no ACS was reachable!
Thanks
ColinAnother update,
It seems not only the 4500X platform is affected, its also 4510R+E's:
WS-C4510R+E
WS-X45-SUP8-E
IOS-XE (cat4500es8-UNIVERSALK9-M), Version 03.03.01.XO
4510R+E#sh redundancy /| i | i state
Current Software state = ACTIVE
Uptime in current state = 2 hours, 39 minutes
Current Software state = STANDBY HOT
Uptime in current state = 6 minutes
4510R+E(config)#login block-for 300 attempts 3 within 60
Exception to IOS Thread:
Frame pointer 8D104E28, PC = C9C0FF4
IOSD-EXT-SIGNAL: Aborted(6), Process = Exec
-Traceback= 1#9492282023e5ef761bd83af205155966 c:C98A000+36FF4 c:C98A000+3C2B0 c:C98A000+3C3A8 :10000000+201B994 :10000000+31CA4E4 :10000000+2C1DC54 :10000000+2C246E0 :10000000+116A3F0 :10000000+2C37508
Fastpath Thread backtrace:
-Traceback= 1#9492282023e5ef761bd83af205155966 c:C98A000+E29C0 c:C98A000+E29A0 iosd_unix:CD74000+1877C pthread:B3FE000+647C
Auxiliary Thread backtrace:
-Traceback= 1#9492282023e5ef761bd83af205155966 pthread:B3FE000+BBB4 pthread:B3FE000+BB94 c:C98A000+FA4E8 iosd_unix:CD74000+21270 pthread:B3FE000+647C
Buffered messages: (last 8192 bytes only)
at least one now can directly "redundancy failover" from config mode..... :) -
Cisco Catalyst 2924 xl Series Switches
How I can restore the basic IOS on the switch. The switch have no ios. The switch prompt on Switch: not Switch# or switch>.
Thanks
Syed Hasan,
[email protected]Hi Syed,
You have to first check if there is any image in switch or not so that you can manually boot from switch: prompt but as you said there is no image in the switch you have to go for xmodem procedure to upgrade the switch.
Have a look at this link and just follow step by step instructions and you will be good to go
http://www.cisco.com/en/US/products/hw/switches/ps607/products_tech_note09186a00800946e5.shtml#xmodem
HTH, if yes please rate the post.
Ankur -
Cisco Catalyst 3750X-24T-S Switch
It has been a while since I checked on these switches. Is it OK to now use the 15.0.2-SE6 IOS or should we continue to stick to the 12.2.58-SE2 version?
I would stick with 12.2.58-SE2 version for a while, if you don't need any feature that is not supported by this version.
HTH -
Error in switch ports POE model, "Cisco Catalyst 2960S-24PS-L Switch"
I have problem with the poe switch Cisco Catalyst 2960S-24PS-L posts does not respond, and me the following error resporta was t
%PLATFORM_ENV-3-ILP_PORT_POST_ERR: %s can’t be brought up because it failed POST
in Inline Power test.
he source of that error and what are the possible causesHey Dustin,
Device needs to be RMA'ed. The inline power supply has failed.
HTH.
Regards,
RS.
Maybe you are looking for
-
Hi, I need to install map viewer in obiee 11g to show maps in dashboards. I have no idea about this, can any one help me. Thanks, PJ
-
as stated in the title, i cant get my hotmail account to work on any ipad, its the same email address i have used for logging into the app store so i know the email is fine, any help would be great
-
Implementing 2 WebViews for different locations with different VC's
I am trying to implement 2 Web views using the storyboard, both linked to another online webpage. For some reason I don't get any errors, but only the PricesViewController works. The other one only shows a white page......All help is really apreciate
-
Error: Max processing time or Max records limit reached
Hi All, While I run the report in Infoview, I get the below error: Unable to retrieve object: Max processing time or Max records limit reached Kindly suggest me. Thanks, Meena
-
Hi Experts, I have a urgent requirement, that is i have to get input from excel sheet, in that excel sheet arround 50,000 records i have to take only one column that is "Object Name" (Program Name) as input (all are "z" object names) we download