Recommended Patch Level for ACS 4.2

Hi,
Is there a recommended patch level for ACS 4.2? I see a patch 4 and 5 can be downloaded. Any gotchas with either?
thanks
Bob

Bob,
I haven't had any issues with patch 5 for ACS 4.2. If you have any concerns please see the release notes for the patch.
HTH,
Mark

Similar Messages

  • Patch level for SAPGUI 7.10 in ECC 6.0

    Hi all,
    we are upgrading our ECC 6.0 SP 13 to SP18. Actually SAPGUI patch level is 4; is there a matrix compatibility or a link in order to check with patch level for SAPGUI is recomended.
    Thank's in advance.
    Best regards.
    Maurizio Ortolani

    Hi Maurizio Ortolani,
    https://websmp205.sap-ag.de/pam
    Regards
    Ashok Dalai

  • Solaris 10 SPARC Recommended Patch Cluster for  2008 quarter 3 version

    Dear All,
    Could any one please guide me, where I can download "Solaris 10 SPARC Recommended Patch Cluster" for 2008 quarter 3 version.
    I have checked in sunsolve.sun.com, I'm able to find only the latest release.
    please guide me.
    Thanks and regards,
    veera

    Ok,
    Here's a cute little formula to try using your systems parameters to gain some "head's-up" on an expected or estimated time to complete the patch run.
    You will need a few things to prepare.
    Number of "real" CPU's (not hyperthreads)
    Speed of each CPU as a whole number i.e 2.87Ghz = 2,867
    the total number of patches from the cluster i.e. Sept 15th = 381 (Solaris 10)
    Network factor if using NFS = 2.5
    local cluster file factor = 1.5
    Patch cluster on CDROM factor = 3.25
    Now, combine all of those elements in this equation:
    { ( #1 * #2 ) / #3 * factor(#4 or #5 or #6) }
    This will yield a number in minutes of patch run time. Then all you will need to add is the standard boot up time to get the total of all patching and reboot.
    Of course you could write a script to extract all of this information and feed it to "bc -l" to get a quick figure.
    Example, on one of my Solaris 10 boxes with the information filled in to the equation:
    #> echo "((4*2660)/381)*1.5"|bc -l
    #> 41.88976377952755905511
    It actually took 44.2 minutes to complete the patching of this box plus another 12 minutes to reboot. But all in all a pretty fair estimate I think.

  • R/3 Patch level  for SAP BW 3.5

    I all could you send me information about the minimum sap r/3 patch level for BW 3.5?
    thanks a lot...

    Hi,
    You would find the info on http://service.sap.com/instguides based on the OS and the database.
    Bye
    Dinesh

  • Assign patch levels for component versions of system: Maintenance Optimizer

    Hello,
    I am trying to have Maintenance Optimizer check for what files I need to download.  However, I get the following error:
    Assign patch levels for component versions of system SXM.
    I susepect that the problem really lies in the fact that the "SP Levels" in the "Software Components" tab is not populated in SMSY.
    Does something read that information from the child system and populate the data automatically?  This is a new system install, and perhaps a step was missed in solman.
    Thanks,
    John

    Hi John,
    MOPZ directs you to SAP Software Download Center in order to show you the lastest status and available packages.
    If you are not seeing the packages perhaps you created you satellite system at solution manager pointing to the wrong product/version.
    MOPZ is created to point you to the available Support Package Stacks for its products.
    Normally one creates a system in solution manager defining it as an ECC server ( this does not have a download page for MOPZ ) when the correct assignment would be SAP ERP ( this last has a download page for MOPZ ).
    If this is your case, you´ll need to redefine the satellite system again in our solution manager.
    hope this helps.
    Valdecir

  • Which is the stable patch level for 2005-B after PL 25.

    Which is the stable patch level for 2005-B for SDK Customization purpose.
    Previously PL 25 is stable. As now PL 41 is already in market.
    Anybody knows?
    regards:
    Sandy

    Hi,
    SAP Business One 2005 B (7.40.252)  SP: 00  PL: 38
    I think the above patch was stable after PL.:25
    Raja.S

  • Kernel Patch Level for Linux RHEL 4

    Hi every one,
    Can any one pls tell me the latest Kernel patch level for OS Linux RHEL 4 .
    or ls tell me whr can i find it .
    Thanks,
    Praveen

    http://service.sap.com/patches
    --> Entry by Application Group
    --> Additional Components
    --> SAP Kernel
              o SAP KERNEL 32-BIT
              o SAP KERNEL 32-BIT UNICODE
              o SAP KERNEL 64-BIT
              o SAP KERNEL 64-BIT UNICODE
    Choose your platform here.
    SAP KERNEL 4.6D 32-BIT
    SAP KERNEL 4.6D_EXT 32-BIT
    SAP KERNEL 6.40 32-BIT
    SAP KERNEL 7.00 32-BIT
    Choose your release
    Download the independent and the database dependent part.
    Markus

  • How to find out SAP J2EE Patch Level for 04s

    Hi all
    I want to find out SAP J2EE Patch Level for 2004s installation i tried to get information from SYSTEM INFORMATION link on WAS homepage but it gave only version :7.00 details and PATCH LEVEL was not mentioned .
    I also tried to find out by looking into VERSION.TXT file for server & dispatcher in ....USR\SAP\J2E.....engine installation but again no details about PatchLevel was mentioned can anyone provide some information regarding what is the  PatchLevel  for WAS 7.0 , J2SE used is 1.4.2_09
    Thanks in Advance !!
    Asif

    Thanks Kenny ,
    But as you can see from version.txt  file for Server0 it does not mention PatchLevel it is
    blank
    Specifies the version of the system
    Cluster-Version: 7.00   PatchLevel 
    Build-On:Thursday, March 23, 2006 18:47 GMT
    Perforce-Server:
    Project-Dir:JKernel/645_VAL_REL
    JKernel Change-List:102557
    Build machine:SAPInternal
    Build java version:1.3.1_12-b03 Sun Microsystems Inc.
    SP-Number: 07
    Source-Dir: D:\make\engine\645_VAL_REL\builds\JKernel\645_VAL_REL\archive\dbg
    i also checked version.txt for dispatcher it is as below
    Specifies the version of the system
    Cluster-Version: 7.00   PatchLevel 
    Build-On:Thursday, March 23, 2006 18:47 GMT
    Perforce-Server:
    Project-Dir:JKernel/645_VAL_REL
    JKernel Change-List:102557
    Build machine:SAPInternal
    Build java version:1.3.1_12-b03 Sun Microsystems Inc.
    SP-Number: 07
    Source-Dir: D:\make\engine\645_VAL_REL\builds\JKernel\645_VAL_REL\archive\dbg
    I tried this on different 2004s server but the Patch Level is not mentioned whereas for 2004
    servers it is mentioned
    so can u give some inference based on above descriptions about What should be SAP J2EE Patch
    Level for the 2004s servers
    Regards !!
    Asif

  • What is latest bundle patch level for exadata x3-2 machine? how to find the doc?

    We have a exadata x3-2 machine. I have a question: What is latest bundle patch level for exadata x3-2 machine? how to find the doc?
    Thanks in advance.

    Check note id 888828.1
    This has all the infomation you need.

  • What is HR new Patch level for SAP 4.7

    Hi all,
    What is the HR new Patch level for SAP 4.7 and GUI 6.4.
    Thanks In advance.
    Satish

    Hi Satish,
    The best and the most authorplace to find that information would be the SAP service Marketplace. Go to <a href="https://service.sap.com/ocs-schedules">this link</a> and you should get it.
    Regards,
    Anand Mandalika.

  • What is the latest patch level for SAP CRM 7.0

    Hello Experts,
    I kindly request you to provide any information on what the latest patch for SAP CRM 7.0 is.  We currently are on SPS5 and the company is proposing to upgrade to SPS9. Please recommend some sources or help me know what the functionality of the new service patch level is?
    Thanks,
    VSK

    > I kindly request you to provide any information on what the latest patch for SAP CRM 7.0 is.  We currently are on SPS5 and the company is proposing to upgrade to SPS9. Please recommend some sources or help me know what the functionality of the new service patch level is?
    http://service.sap.com/patches
    --> SAP Application Components
    --> SAP CRM
    --> SAP CRM 7.0
    --> Entry by Component
    --> CRM Application Server ABAP
    --> SAP CRM ABAP 7.0
    --> Support Packages
    Scroll down and see the latest patches. If you click on the text you'll see the problems fixed.
    Support packages are by definition a collection of patches and fixes for problems, however, there may be small improvements in certain areas.
    Markus

  • Version Numbers Vs. Patch Levels For Web Tools

    I have noticed that version numbers for Web Tools such as 620, 621, 622, 624, 625, 627, and 628 correspond somehow to the patch level (6, 8, 10, etc.). What is the difference between the version numbers and patch levels, and which ones match up with which?

    Hi Michael,
    Prior to p10, the last digit of the version corresponds to the patch level.
    From p10 going forward, the last set of digits represents the patch.
    Patch 10 is 2007.0.630.10
    Patch 11 will be 2007.0.631.11
    The version will only change if there are upgrade scripts that need to run for the patch.

  • Bex Patch level for Windows 7 and SAP GUI 710

    Hi,
    We have the machine with following config:
    O.S  - Windows 7
    SAP GUI - 710
    MS Office 2007
    When a user logs into Bex Analayzer, clicks on Add-ins he gets an error message in German.
    Same kind of problem was encountered with Office 2003, but MS fix 907417 solved the problem.
    But i am not able to find any such fix for Office 2007.
    Can anyone tell me what should be the patch level of Bex in this case?

    Hi,
    What is the exact error message you are getting?
    Thanks
    Riyez

  • PRIVILEGE LEVELS FOR ACS WITH AD DATABASE

    How do I configure two separate privilige levels for two groups. These groups exist in the AD database i.e. my ACS (Pri & Backup) are looking in AD for authentication.

    Hi ,
    If you are using TACACS ,
    Bring users/groups in at level needed
    1. Go to user or group setup in ACS
    2. Drop down to "TACACS+ Settings"
    3. Place a check in "Shell (Exec)"
    4. Place a check in "Privilege level" and enter " priv "(1 to 15) in the adjacent field
    If you are using RADIUS,
    aaa new-model
    aaa authentication login default group radius local
    aaa authorization exec default group radius local
    radius-server host X.X.X.X key XXXX
    Following is the configuration required in the Radius Server
    The AV pair in the ACS -->group setup--> IETF RADIUS Attributes
    [006] Service-Type = Login
    /* Following is for getting the user straight in privledge mode */ to set priv 15
    The AV pair in Cisco IOS/PIX RADIUS Attributes
    [009\001] cisco-av-pair = shell:priv-lvl=15
    For more information on above commands, please refer to the following link :-
    http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fsec
    ur_c/fsaaa/index.htm
    Please try the above and let me know if this helps.
    Thanks

  • Patch levels for Oracle and kernel

    Hi everyone,
    Can you pls tell what are the maximum and minimum patch levels that can be used for BW 3.5 installation on LINUX RHEL 4 ,
                     oracle -10.2.0.2 & kernel - 6.4 .
    Thanks in advance,
    Praveen

    hi people,
    we have checked for the status of support package in Transaction SPAM traffic signal is still red and in the Phase RUN_SPAU_? it is stuck and even after restarting import it shows clean-up phase is left and it ends with same error mention above
    the support package name is SAPKB70014 size is 116266 MB now after restarting the Import the following error message comes
    The import was stopped, since an error occurred during the phase RUN_SPAU_?,
    which the Support Package Manager is unable to resolve without your input.
    After you have corrected the cause of the error, continue with the
    import by choosing Support Package -> Import queue from the initial
    screen of the Support Package Manager.
    The following details help you to analyze the problem:
    - Error in phase: RUN_SPAU_?
    - Reason for error: TP_CANNOT_CONNECT_SYSTEM
    - Return code: 0255
    - Error message: Could not connect to semaphore server
    we run all the phase in background, and even after entering the support package number in transaction SPAU there it is showing
    "No objects within selected filter parameteres"
    Q.1 Any idea what went wrong and how to fix that?
    Q.2 Is there any problem if we run the all four phases of support package in background or it should be run in dialog
    latest tp & R3trans updated?

Maybe you are looking for