Recordable Volume Change Control Number?

Does any one know the midi control number that Garageband 09 uses to record volume changes on a software instrument track?
I'm not talking about the standard Midi control number 7 for volume - this only controls the left-right fader in the track header and Garageband does not record volume changes to this fader.
There's a value from 1 to 127 that will record volume changes as a part of the track itself. Does anyone know what that number is? Or does anyone have the table for all the control numbers that Garageband uses, or can anyone provide a link to such a table of such control numbers?
Thanks.

Similar Messages

Volume has fixed value after recording volume-slider

Hi
I recorded a part I played on my keyboard and after that recorded volume-changes I made with the volume slider . But after the so created region the volume stays fixed on the last recorded value. Is there a way to avoid that ? Has to do something with last volume message that isn't ended.

no one knows how to have controle over the volume slider again after a hyperdraw in a region? Is it normal that the volume is fixed for the rest of the song unless you hyperdraw or automate again ? very anoying.....Even after moving all trackautomation to region it stays fixed , you should have full controle agsin over the volume.
Is this a bug?

Recording 'Volume' with the midi notes??

Has anyone figured out how to get GB-09' to record:
-midi volume at the same time your playing the actual midi notes in? ( all at once )
+maybe expression pedal or volume pedal? or re-mapping sysex, or....
GB 9' version 5.1 (398)

GB doesn't record volume changes in Real Time, it does, however record velocity (which may appear as volume changes, depending on the instrument)

Main "Play Control" volume changes on its own when I open and close WinDVD or Winfast

Main "Play Control" volume changes on its own when I open these programs, and when they're closed the main volume resets to where it was before the program was opened.
Surely I'm not the only one who has had this problem before.. I've had the problem with both Creative soundcards I've owned, before and after different drivers installations.
It can be very irritating and can potentially lead to damaged speakers if I'm not paying close attention to what my various volume knobs are set at before and after I open these programs.
I appreciate any and all input, thankyou.

I had to edit to reflect its Mavericks 10.9

Can we change [maximum number of records per page] property at run time

can we change [maximum number of records per page] property at run time in report 6i

Ravi,
I hope you are already done with this. In the invoice there is a nice example you can use on the xml blogs.
You limit the number of lines per page when you use the xsl commands like this in your template:
<xsl:variable name="lpp" select="number(13)"/>
<?for-each@section:LIST_G_INVOICE?>
<xsl:variable xdofo:ctx="incontext" name="invLines" select=".//G_LINES[LINE_TYPE='LINE']"/>
<?for-each:$invLines?> <?if:(position()-1) mod $lpp=0?> <xsl:variable name="start" xdofo:ctx="incontext" select="position()"/>
and then you have the table where you have the data
<?for-each:$invLines?><?if:position()>=$start and position()<$start+$lpp?>
and all your lines
and then
<?end if?><?end for-each?>

WaveStudio recording volume control

I'm using WaveStudio 7 in concert with my Soundblaster to digitize lp's. I'm also using a Graham Slee preamp with good results. I might be missing this feature somewhere, but I can't seem to find an adjustable recording volume feature. I've even tried to reduce volume input-via the sound card through the Windows device settings. This feature is greyed out.
The older version of WaveStudio had an adjustable input level feature. Does version 7 have one somewhere?
Much thanks!
Zound Guy

Think I have solved it. Go into control panel->sound. Under the recording tab select the appropriate input, Line-In in my case, set as default then adjust properties. Under the levels tab you can increase the volume of the input.

Sat Pro A200/PSAE7 - Volume Control turns endless, no smooth volume change

Hello,
On my newly purchased Pro A200/PSAE7 the (hardware) volume control - front side, right from speaker plug - turns endless and when using it the volume does not change "smooth" - more "abrupt". Because of this there is no "fine tuning" possible.
Q: Does somebody else has the same hardware side (endless turn) and software side (no smooth volume change) situation?
Many thanks for any reply in advance!
Best regards,
andreas

Hi,
Thx for your reply.
I also assume that it was software related. I only set up a clean XP recovery, d/l all XP updates and disabled this service/program.
I might try to install new sound drivers but - Never change a running system!
Best regards,
andreas

Re: Recording volume control

No Name are U still out there?
Still need some help trying to adjust recording volume. Wish I had read a previous post that advises that the adjustments made by MacMP3Gain were permanent. But anyway, what I did read was the instructive post that said: >When using track gain with a lot of different songs, just make sure that the Target MP3 Gain Value is set to 89 dB, and each track will be adjusted so that the loudest perceived volume of each track will be around 89 dB. <
But I don't see an option for "Track Gain". The only options are Album Gain and Radio Gain. Am using vers. 1.9 Is there another version?
Also- in iTunes, I do no have the Soundcheck option under prefs-->Advance-->Burning. Only have it under Playback. Is that in a newer version of iTunes? Am using 6.0.2. Thank-U.

revised note!!!
I DONT CHECK THE FORUMS SO CAN YOU EMAIL ME DIRECTLY!
Aloha
I am trying to import audio files I dictated into Sony mini disc
recorder to the iMac g5 Years ago I did a lot of this with Toast Spin Doctor
6.1.1
Now I cannot seem to find an import option in iTunes to do this
If I jack the mini disc player into the audio in how doi I import from this line in to the iTunes or cn I do this without Toast.
ToAst is not importing it It is not hearing the file for some reason???
I dont check the forums so can you post me via my email directly??
If you dont know how can you pass this text on to a group that might?
thanks so much
elan Star
ww.sunstarphoto.com

How to update record in Table control

Dear Friends,
I have table control that has space for 10 records but i need to update 15 record from the flat file which is getting into the table how can i do this.
Regards,
MAHENDRA.

Hi,
you record for an item and then click on page down and save it.use the loop on this bdc to populate the the bdc table no need to do manually.
LOOP AT l_i_dettab_item INTO l_wa_dettab_item..
      l_cursor = l_cursor + 1.
      IF l_cursor GT 1.
        PERFORM bdc_field       USING 'BDC_OKCODE'
                               '=P+'.
      ENDIF.
      PERFORM cursor_pos_notation    USING 'V_EAN_DET001- GTIN_VARIANT_TYP'
                                              l_cursor
                                    CHANGING l_cursor_notation.
      PERFORM cursor_pos_notation    USING 'V_EAN_DET001-VTWEG'
                                              l_cursor
                                    CHANGING l_cursor_notation.
      PERFORM bdc_field       USING l_cursor_notation
                                    l_wa_dettab_item-vtweg.
      PERFORM cursor_pos_notation    USING 'V_EAN_DET001-DATEFROM'
                                              l_cursor
                                    CHANGING l_cursor_notation.
         PERFORM bdc_field       USING l_cursor_notation
                                    l_v_date.
      PERFORM bdc_field       USING 'BDC_CURSOR'
                                    l_cursor_notation.
      PERFORM bdc_field       USING 'BDC_OKCODE'
                                    '=SAVE'.
    ENDLOOP.
Here my ok code for page down is =P+ so i am looping on the table control data and then populating the bdc table after this i will populate the remaing info required for the call transaction and refresh bdcdata.
thats it no need to do recording 1000 times.
now if u do like this it doesn't depend on the number of records on table control.
it will take all the records.
Reward if useful.
Regards,
sasi
Regards,
sasi

Duplicate records in TABLE CONTROL

Hi folks,
i am doing a module pool where my internal table (itab) data is comming to table ontrol(ctrl).then i need to select one record in table control & then i press REFRESH push button.
after putting the refresh button, some new records are comming to that same internal table.then i need to display the modified internal table (some new records are added) data in the table control.
The modified internal table data is comming to the table control but to the last of table control, some records are repeating.
before comming to table control, i checked the modified itab. it contains correct data.i.e it contains 15 records.(previously i have 5 records.after REFRESH button 10 more records are added.). but when this table is comming to table control, it contains some 100 record.i should get only 15 record.
why these records r repeting. how to delete the duplicate records from table control?
plz suggest me where i am doing mistake.
correct answer will be rewarded
Thanks & Regards

Hi ,
Thanks for ur help. but i should not refresh the internal table as some records r already present.after putting the REFRESH button, some new records r appending to this existing table.then i am going to display the previous records & the new records as well.
i checked the internal table after modification.it contains actual number of records. but after comming to table control , more records r comming.
is this the problem with scrolling or waht?
plz suggest where i am doing mistake.i am giving my coding below.
PROCESS BEFORE OUTPUT.
MODULE STATUS_0200.
module tc_shelf_change_tc_attr.
loop at object_tab1
       with control tablctrl
       cursor tablctrl-current_line.
    module tc_shelf_get_lines.
endloop.
PROCESS AFTER INPUT.
module set_exit AT EXIT-COMMAND.
   loop at object_tab1.
         chain.
          field: object_tab1-prueflos,
                 object_tab1-matnr.
           module shelf_modify on chain-request.
         endchain.
        field object_tab1-idx
         module shelf_mark on request.
               endloop.
module shelf_user_command.
module user_command_0200.
***INCLUDE Y_RQEEAL10_STATUS_0200O01 .
*&      Module STATUS_0200 OUTPUT
      text
MODULE STATUS_0200 OUTPUT.
SET PF-STATUS 'MAIN'.
SET TITLEBAR 'xxx'.
ENDMODULE.                 " STATUS_0200 OUTPUT
*&      Module tc_shelf_change_tc_attr OUTPUT
      text
MODULE tc_shelf_change_tc_attr OUTPUT.
delete adjacent duplicates from object_tab1 comparing prueflos matnr.
describe table object_tab1 lines tablctrl-lines.
ENDMODULE.                 " tc_shelf_change_tc_attr OUTPUT
*&      Module tc_shelf_get_lines OUTPUT
      text
MODULE tc_shelf_get_lines OUTPUT.
data: g_tc_shelf_lines like sy-loopc.
if tablctrl-current_line > tablctrl-lines.
stop.
endif.
g_tc_tablctrl_lines = sy-loopc.
*refresh control tablctrl from screen 0200.
ENDMODULE.                 " tc_shelf_get_lines OUTPUT
***INCLUDE Y_RQEEAL10_SHELF_MODIFYI01 .
*&      Module shelf_modify INPUT
      text
MODULE shelf_modify INPUT.
modify object_tab1
    index tablctrl-current_line.
ENDMODULE.                 " shelf_modify INPUT
*&      Module set_exit INPUT
      text
module set_exit INPUT.
leave program.
endmodule.                 " set_exit INPUT
*&      Module shelf_mark INPUT
      text
MODULE shelf_mark INPUT.
data: g_shelf_wa2 like line of object_tab1.
if tablctrl-line_sel_mode = 1
and object_tab1-idx = 'X'.
    loop at object_tab1 into g_shelf_wa2
      where idx = 'X'.
      g_shelf_wa2-idx = ''.
      modify object_tab1
        from g_shelf_wa2
        transporting idx.
    endloop.
endif.
modify object_tab1
    index tablctrl-current_line
    transporting idx plnty plnnr plnal.
ENDMODULE.                 " shelf_mark INPUT
*&      Module shelf_user_command INPUT
      text
MODULE shelf_user_command INPUT.
ok_code = sy-ucomm.
perform user_ok_tc using    'TABLCTRL'
                              'OBJECT_TAB1'
                     changing ok_code.
sy-ucomm = ok_code.
ENDMODULE.                 " shelf_user_command INPUT
*&      Module user_command_0100 INPUT
      text
MODULE user_command_0200 INPUT.
data:v_line(3).
case OK_CODE.
when 'LAST'.
read table object_tab1 with key idx = 'X'.
if sy-subrc = 0.
select * from qals
                      where enstehdat <= object_tab1-enstehdat
                      and   plnty ne space
                      and   plnnr ne space
                      and   plnal ne space.
if sy-dbcnt > 0.
if qals-enstehdat = object_tab1-enstehdat.
   check qals-entstezeit < object_tab1-entstezeit.
   move-corresponding qals to object_tab2.
   append object_tab2.
   else.
   move-corresponding qals to object_tab2.
   append object_tab2.
   endif.
     endif.
        endselect.
   sort object_tab2 by enstehdat entstezeit descending.
loop at object_tab2 to 25.
if not object_tab2-prueflos is initial.
append object_tab2 to object_tab1.
endif.
clear object_tab2.
endloop.
endif.
when 'SAVE'.
loop at object_tab1 where idx = 'X'.
if ( not object_tab1-plnty is initial and
                not object_tab1-plnnr is initial and
                           not object_tab1-plnal is initial ).
   select single * from qals into corresponding fields of wa_qals
   where prueflos = object_tab1-prueflos.
      if sy-subrc = 0.
       wa_qals-plnty = object_tab1-plnty.
       wa_qals-plnnr = object_tab1-plnnr.
       wa_qals-plnal = object_tab1-plnal.
update qals from wa_qals.
if sy-subrc <> 0.
Message E001 with 'plan is not assigned to lot in sap(updation)'.
else.
v_line = tablctrl-current_line - ( tablctrl-current_line - 1 ).
delete object_tab1.
endif.
   endif.
      endif.
           endloop.
when 'BACK'.
leave program.
when 'NEXT'.
call screen 300.
ENDCASE.
***INCLUDE Y_RQEEAL10_USER_OK_TCF01 .
*&      Form user_ok_tc
      text
     -->P_0078   text
     -->P_0079   text
     <--P_OK_CODE text
form user_ok_tc using    p_tc_name type dynfnam
                          p_table_name
                 changing p_ok_code like sy-ucomm.
   data: l_ok              type sy-ucomm,
         l_offset          type i.
   search p_ok_code for p_tc_name.
   if sy-subrc <> 0.
     exit.
   endif.
   l_offset = strlen( p_tc_name ) + 1.
   l_ok = p_ok_code+l_offset.
   case l_ok.
     when 'P--' or                     "top of list
          'P-' or                     "previous page
          'P+' or                     "next page
          'P++'.                       "bottom of list
       perform compute_scrolling_in_tc using p_tc_name
                                             l_ok.
       clear p_ok_code.
   endcase.
endform.                    " user_ok_tc
*&      Form compute_scrolling_in_tc
      text
     -->P_P_TC_NAME text
     -->P_L_OK text
form compute_scrolling_in_tc using    p_tc_name
                                       p_ok_code.
   data l_tc_new_top_line     type i.
   data l_tc_name             like feld-name.
   data l_tc_lines_name       like feld-name.
   data l_tc_field_name       like feld-name.
   field-symbols <tc>         type cxtab_control.
   field-symbols <lines>      type i.
   assign (p_tc_name) to <tc>.
   concatenate 'G_' p_tc_name '_LINES' into l_tc_lines_name.
   assign (l_tc_lines_name) to <lines>.
   if <tc>-lines = 0.
     l_tc_new_top_line = 1.
   else.
     call function 'SCROLLING_IN_TABLE'
       exporting
         entry_act      = <tc>-top_line
         entry_from     = 1
         entry_to       = <tc>-lines
         last_page_full = 'X'
         loops          = <lines>
         ok_code        = p_ok_code
         overlapping    = 'X'
       importing
         entry_new      = l_tc_new_top_line
       exceptions
         others         = 0.
   endif.
   get cursor field l_tc_field_name
              area l_tc_name.
   if syst-subrc = 0.
     if l_tc_name = p_tc_name.
       set cursor field l_tc_field_name line 1.
     endif.
   endif.
   <tc>-top_line = l_tc_new_top_line.
endform.                              " COMPUTE_SCROLLING_IN_TC
Thanks

Recording Volume

Hello,
I have looked for this topic without success. If I missed it forgive me.
Forever I have been able to control the recording volume via the info track selection.
Then just like that it is gray'd out and not allowing me to adjust it.
My wifes G5 runing GB2 had the same problem but fixed itself when she plugged in the Snowball mic by Blue®
I have the same mics and like I sid there were no problems. I have tried everything I know of, from rebooting to reinstalling.
So now when I try to record audio, be it a guitar or vocal I am peeking out all over the place. Even if I go into the main system preferences and bring the output volume for the input way down, the recording is still sounding distorted.
I am using a basic track with no effect either.
Sincerely,
At A Loss

Sorry for the long delay. Never was notified you rang.
Anyway yes it is a USB mic. Problem was:
One the firmware on this new mic was not a Rev1 mic (meaning the Rev1 Snowballs volume input was controllable via the music software .
The new mic's have changed things up a bit by making the user use the systems volume input via the system pref's. (which was a dumb move but oh well)
They do have a better sound quality. Also i think it is note worthy to mention folks who are having problem powering their USB mic throug a HUB. The HUB needs to be powered. I use the HUB Belkin® made for the MacMini® and it works fine.
Thanks,
Robert

CRM Web UI :- How to Control number of session of Web UI for a user

Hello Experts,
We do have very specific requirement which SAP doesn`t recommend in terms of multi-sessioning for a user.So we are little worried upon the challeges.Could you please share your ideas/Experience on following?
1.How to Control number of Internet explorer session for the web UI (may be 2 or 3).?
Though SAP doesn`t recommned more than one but our client requires 2 or more than that but we need to fix it either
2 or 3.
So we are looking for specific setting for this.
2.What are the challenges we need to face if we implement option 1?
3.Specially in interaction record management
    a. Is there chance of loosing the data if agent has opened more than two session.
    b. In which session interaction record data will get stored,the one on which agent picked up the call or in the latest
        one?
Please let me know if I am not clear enough on any point.
Thanks in advance,
Shailendra Tolambiya

Hi Shailendra,
The following wiki page might be useful in this respect:
http://wiki.sdn.sap.com/wiki/x/gxdKDQ
Best Regards,
Shiromani

So in the last few days I've noticed that pressing my volume change keys actually isn't changing the volume on my macbook pro at all. When I press the volume up or down keys, it makes the recognisable pop sound but stays at the same volume while the squar

So in the last few days I’ve noticed that pressing my volume change keys actually isn’t changing the volume on my macbook pro at all. When I press the volume up or down keys, it makes the recognisable pop sound but stays at the same volume while the squares go up or down. I mute it but my computer still makes sound. It’s the same with the volume control up the top of the screen, too. I slide it up and down and it doesn’t change the volume at all. The only way I can change the volume is with my speakers or the program I’m in (iTunes, VLC etc). I restarted and it seems to be okay then I go to change it a couple minutes later and it’s back to not working again.
I’ve checked my settings- the “use all F1, F2, etc. keys as standard fuction keys” is not switched on, and I have tried a suggestion of moving the com.apple.systempreferences.plist file out of the library and onto the desktop and restarting and neither of those seem to make any difference whatsoever. I’ve tried to find online forums but the only suggestions I found were those two and they didn’t work.
I’m just annoyed because I usually have the worst luck with technology but my macbook had been going strong and I got it because of the apparent lack of things that could go wrong, but of course even if there is one thing that could go wrong it will happen to me.
Please help!

You migh give resetting your NVRAM a try:
http://support.apple.com/kb/ht1379

How to control number of rows displayed in a report by user?

Hi All!
I have provided a select list called 'Number of rows' in my report page.User can choose any number in the list, and accordingly he should be able to see so many number of rows in that report page.
For example: if user selects 50 from the list, he will be able to see 50 records at a time out of say 2000 records retrieved. I want to control number of rows displayed per page dynamically. And if he selects 25 in the select list, he should be able to see 25 records at a time out of 2000.
How to do it? Please give me ideas.
Thanking in advance.
Regards,
Deepika.

Hi Deepika,
If you have a Select List with Submit called, say "P1_ROWS", you just enter P1_ROWS into the Report Attribute's "Number of Rows (Item)" setting.
Regards
Andy

How do I change the number of rings on my phone?

how do I change the number of rings on my phone?

Call your provider and ask them to do it.
This is not controlled from the iphone.

Recordable Volume Change Control Number?

Similar Messages

Maybe you are looking for