Recorded Audio Not playing back in Premiere Pro

I use Dxtory to record; Sound from system as well as mutual programs such as skype all playback as intended. The audio from my microphone, though it plays back when reviewing it in a media program, is not present when I import it into Premiere. Still new to all of this. Any suggestions?

Hi AkaDc,
Though it was made for Premiere Pro CS6, this video tutorial should assist you:
Hope it helps.
Thanks,
Kevin

Similar Messages

QuickTime movie made in QuickTime 7 audio not playing back in qt 10

I made a qt using qt 7 pro, H.264 with the AAC audio compressor and that qt will not play back audio in QuickTime 10 which is what my client has on his computer.

The point being here is that I rendered out a movie in QuickTime pro 7 and the audio isn't being resolved in QuickTime 10, even on my own computer.
Does the audio play correctly in the QT 7 Player? Have you determined if this is a playback or a conversion problem? I asked about the source file since some source compression formats will not convert the audio using QT 7 Pro. In a similar manner, some AAC data rate and sampling rate combinations are not supported on the Mac which is why QT is programmed to disallow their use. (Unfortunately, I do not know what would happen if a source file using such audio settings were to be used as a source for a QT 7 Pro conversion.)
How is this possible and should I just remove qt10 altogether?
As already indicated, there are a number of "normal" problems that could give these results. In addition, QT changes made as part of the most recent Lion OS update seem to have had adverse effects on QT 7 Pro features (as evidenced by the loss of the "loop" playback feature and "green screen" problems on some platforms). As to the removal of QT 10, the embedded structures cannot be removed without corrupting the operating system. And, while the QT X player can be removed/deleted, why bother since you can just as easily opt not to use it for manual playback and restoring it, should you later change your mind, may present a problem.
I am a professional editor, have been working on Macs since 1992 (Avid and FCP7) and have never had a compatibility problem like this before within the Mac environment.
Have you made any recent changes to your normal work flow that might account for this problem and is the problem consistently repeatable?

Audio Instr records but does not play back in Logic Pro 9

Hi all.... recently upgraded from a PPC G5 to an iMac 27"" 2.8 GHz Intel i7 w/4GB mem. was running Logic 7.2,now Pro 9. Here's my prob. After opening an old session in LP9 and recording an audio instrmnt (no prob setting up trk or recording) the trk won't play back. However,I was able to drag the recorded region to another trk (set up w/same audio instrmnt) and it plays.Is there some possibility that when opening a Logic 7.2 session that LP9 sees an audio instrmnr trk as an "audio"trk instead? Since I'm relatively new please excuse any newbie faults. Any help is greatly appreciated.
-Ronnie-

Hi all.... recently upgraded from a PPC G5 to an iMac 27"" 2.8 GHz Intel i7 w/4GB mem. was running Logic 7.2,now Pro 9. Here's my prob. After opening an old session in LP9 and recording an audio instrmnt (no prob setting up trk or recording) the trk won't play back. However,I was able to drag the recorded region to another trk (set up w/same audio instrmnt) and it plays.Is there some possibility that when opening a Logic 7.2 session that LP9 sees an audio instrmnr trk as an "audio"trk instead? Since I'm relatively new please excuse any newbie faults. Any help is greatly appreciated.
-Ronnie-

.mov files not playing properly in Premiere Pro

Hey!
I'm new to setting up projects in Premiere, but I have the newest version (2014) of the software, and I'm having problems playing back files within the software. These are .mov files, taken on a Canon mark 3 primarily, and while some files play back fine, others black out the video or grab a random frame and hold it while the audio plays back smoothly. The clips play fine when I open in Quicktime.
I assume this is is a codec problem or something? I have no idea about codecs. Please help! I really appreciate it.
Thank you.

I believe that those MOV files are using the H.264 CODEC. You will need to have that installed (comes with later versions of Apple's QT), but even then, might not work in PrPro 1.5. I just do not recall if it supported H.264.
For a bit more background on file formats, this ARTICLE might be useful. For a bit more on CODEC's in general, this ARTICLE might be useful.
Good luck, and hope that PrPro 1.5 does handle H.264.
Hunt

Mpeg audio not playing back correctly

I just upgraded to CS6 and am doing my first project in it.
I have a Sony HVR-Z1U camera which i recorded HDV to and have captured this into PPro using HDV capture settings
Here is the result of the capture
File Path: V:\HC2012\Show\Untitled Clip 04.mpeg
Type: MPEG Movie
File Size: 9.5 GB
Image Size: 1440 x 1080
Frame Rate: 29.97
Source Audio Format: 48000 Hz - compressed - Stereo
Project Audio Format: 48000 Hz - 32 bit floating point - Stereo
Total Duration: 00:51:54:21
Pixel Aspect Ratio: 1.3333
When i try and play back the clip in CS6, the video comes out ok but the audio sounds like a chirp.
If i right clip the clip and say to edit in Audition, it sounds fine
If i play the file back from Explorer in Windows Media play it looks and sounds fine
If i import the same file into CS5.5 it plays both video and audio fine.
What am i doing wrong here?

Try clearing your media cache files and see if that fixes the issue. You can do so by going up top inside premiere and going to "edit>prefrences>media then click where it says "clean" under media cache datebase. This might fix the problem.

AVI audio not heard in VLC & Premiere Pro CS6

Hi!
I have an avi and Premiere Pro doesn't allow me to import it. The avi's audio is G.723 ADPCM codec and Premiere and VLC don't get it - the audio can't be heard. The only program in which I can hear the audio is Media Player Classic.
When I converted the AVI to mp4 the video worked fine and imported to Premiere but the audio wasn't even part of the file. When I imported the mp4 file to Audition it didn't show me the audio file.
How can I fix it?
Thanks

Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
What is a CODEC... a Primer http://forums.adobe.com/thread/546811
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30
For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/
For Mac http://mediainspector.massanti.com/

.mpg audio not playing back...

Hi Folks! Got a little challenge for ya'll...
PPC 2.0 Dual Core with leopard. & QTpro 7.6.9
Mac Book 2.16 intel dual core running Tiger & QTpro 7.6.4
Both units have IDENTICAL FCP Studio 2 6.06. The compressor set ups/exports are exactly the same.
The only variable.... intel on tiger, and PPC on leopard.. MPG plays fine on intel with tiger, but not on PPC with leopard...
I used to be able to hear my mpg files on the ppc prior to leopard... and I did not upgrade my QT when intalling Leopard. Is this a variable anyone else has found? IS there an issue with Leopard or is this only a QT issue... I can't find a QT 7.6.9 upgrade to match these QT items to test this in stages... i also lost the use of Photoshop 7 with Leopard. This leads me to question if Leopard could be causing this audio issue as well. Just an assumption... As my Photoshop 7 works fine on Intel with Tiger as well... Clear as mud now?
When I export mpg clips in Compressor they do not show or play audio on the PPC with Leopard. I transfer them to the Intel with Tiger and they play fine... They also play back fine on my stations Ultra Nexxus playback system... Craziness abounds here... Has anyone regained their mpg and photoshop 7 with Lion? Just asking....
Any suggestions I'm not seeing? Thanks tons in advance...
Joe Stanfill
MJR VIdeo Productions

What sort of MPEG files -1,2,3 or 4? Audio or video files?
Photoshop 7 is old. Photoshop 8 (CS1) works fine on Leopard.
Photoshop 7 is entirely PPC code and will not run on Lion under any circumstances.
There's no such thing as QuckTime 7.6.9 -at least not publicly.
7.6.6 is the latest version and Tiger doesn't qualify for it.

Recorded audio is playing back out of time with midi drums, I'm using a new avalon 737 with it too.

I am trying to record guitar over a midi drum track, its all great except the guitar plays back out of time with the drums, i have just introduced an avalon 737 compressor, it didnt used to have before.
Before the Avalon it all worked perfectly, cant figure out how the avalon would make logic play out of time, I am recording through an Apogee Duet 2.

Yeah, and it didn't work.
I had problems when I updated to iOS 5 (lost all my apps - a few of my friends had the same problem) and when there was an update to iOS 4 (camera wouldn't work). The iOS 5 issue was sorted by backup (but I lost the app data) but for the iOS 4 issue I had to return my iPod to get a new one.

ActiveX Control recording but not playing back in a VS 2012 Web Performance Test

I am testing an application that loads an Active X control for entering some login information. While recording, this control works fine and I am able to enter information and it is recorded. However on playback in the playback window it has the error "An
add-on for this website failed to run. Check the security settings in Internet Options for potential conflicts."
Window 7 OS 64 bit
IE 8 recorded on 32 bit version
I see no obvious security conflicts. This runs fine when navigating through manually and recording. It is only during playback where this error occurs.

Hi IndyJason,
Thank you for posting in MSDN forum.
As you said that you could not playback the Active X control successfully in web performance test. I know that the ActiveX controls in your Web application will fall into three categories, depending on how they work at the HTTP level.
Reference:
https://msdn.microsoft.com/en-us/library/ms404678%28v=vs.110%29.aspx?f=255&MSPPError=-2147217396
I found that this confusion may be come from the browser preview in the Web test result viewer. The Web Performance Test Results Viewer does not allow script or ActiveX controls to run, because the Web performance test engine does not run the, and for security
reasons.
For more information, please you refer to this follwoing blog(Web Tests Can Succeed Even Though It Appears They Failed Part):
http://blogs.msdn.com/edglas/archive/2010/03/24/web-test-authoring-and-debugging-techniques-for-visual-studio-2010.aspx
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

I recorded VCR tape onto DVD-R but will not play on my MacBook Pro. I have already recorded multiple DVDs. How can I get it to play on my Mac?

I recorded VCR tape onto DVD-R but will not play on my MacBook Pro. I have already recorded multiple DVDs. How can I get it to play on my Mac?

"I recorded VCR tape onto DVD-R"
How? Using what equipment/software?
"The DVD plays on the device on which it was recorded."
Just a guess: You're using a VCR-DVD combo recorder. DVDs produced in this way will play on the device that made them, but won't play on anything else until they're "finalized." In fact, Macs will recognize unfinalized DVDs as blank discs until the discs are finalized. Check the manual that came with the recording device for instructions.

Premiere CC 2014 audio not playing

Audio not playing in some projects, either in reference mon or timeline, but plays in other projects.
Premiere CC latest
MAC 2.66 Gh i7 8GB RAM NVIDIA GeForce GT 330M 512 MB
OSX Mavericks /256GB SSD (P
1TB HD write disc

Moving to Premiere forum

Can I getting back to Premiere Pro CC (not 2014) ? CC 2014 it's very bad

Can I getting back to Premiere Pro CC (not 2014) ? CC 2014 it's very bad
I hope that can possible or I have to change of program. CC 2014 was disappointing

See here:
How to Access, Restore or Update to Any Version of Adobe CC Apps | ProDesignTools

Problem Playing Video in Premiere Pro CS4

I am having a problem playing video in premiere pro. When I input any movie clip and try to play it in both the timeline and in the preview mode, the audio works fine but the video only plays a few seconds worth of footage at a really slow pace so that it takes up the entire time. For instance if I load a 3 minute video, the sound is normal but over the coarse of that 3 minutes I will only see a small number of the frames and they are cycled through in ultra slow motion.
All the clips play normally outside of premiere. I have uninstalled and reinstalled the program. I have premiere installed on my laptop and it works fine. I have tried rendering the video first and it still doesn't work. I have tried holding shift before the program is loading and it did nothing. I have downloaded all the updates too. Videos seem to play fine in After Effects.
Also, I am having trouble when importing HD video into premiere and after effects. For some reason the programs freeze when I try to import footage from my Creative Vado HD pocket video camera.
Here are my computer specs
Windows Vista Ultimate 32 Bit
Intel Core2 Quad q8200
ATI Radeon 4670 Graphics Card
Gigabyte Motherboard
4GB of 800 Mhz RAM
This is really frustrating. Any help would be greatly appreciated

Keith,
The file extension .AVI indicate a "wrapper." All sorts of stuff can be in that wrapper *. Some of that stuff will play/edit fine. Much will not and create issues, as you have seen. Your camera uses a CODEC to create those .AVI files. That CODEC is the issue. I recommend G-Spot to find out what the CODEC is. Some times it's just a matter of having the proper CODEC installed on the computer. Most of the time, it takes much more than that - hence Eddie's links on "conversion." At least G-Spot will get us all on the same playing field, and explicit help can follow - probably to study Eddie's links. My guess is that your camera uses some form of DivX CODEC, hence the problem that you see.
Good luck,
Hunt
* Think of .AVI like the foil wrapper on a stick of gum, when you remove the outer lable. You know it's gum, but not what flavor. Could be Juicyfruit, or Spearmint, or Double-mint. G-Spot will tell you the flavor. PrPro likes some flavors, but hates others.

Sound Does not Play Back

I am playing recorded video from a Sony HDR-HC1 through the DV out and capturing in on location. All goes well(except for some red frame video) during capture, good video and audio. I captured three times. On one occasion the audio played back. The other two it did not. Audio will not play back in PP CS3. The file is an AVI T2. The same clips play back fine in Edius 3.6 with good sound.
Any tips on what is wrong?
Kent

Hey There and Welcome to the mac forum!!!!
Could it be possible that you moved or even trashed the audio files you were using? If so then they get trashed in imovie to.
Next time, transform the movie into a Quicktime movie (once you are completely done the project). Once you have done this, you can move or even trash any of the elements of your movie (even the footage) but this will make your actual imovie project useless (The Quicktime one will be fine).
I hope this helps,
-Hooked

Insert a clip into a new sequence, the clip will not play back

Macbookpro 8G ram twin 2.5 Intel, 1333 Mhz
I am an experienced editor coming over from AVID. This is my second project attempt in Premiere. First was fine. I imported clips that live on my hard drive. When I make a clip selection, mark the in and out and "insert into a new sequence, the sequence will not play back un less I render it first. I am talking about one (1) shot maybe 3 seconds long. I have done no other edits in the sequence and have added no effects but there is an effect icon on the clip in the sequence, This can't be right. It is not the way it worked for my first test project. It would take 40 hours to edit a 60 second spot… What has happened here?
Footage is 1080p 24fps. Short with a digital DSLR and Files are the same (.mov) as in the first project,

I have exactly the same problem. All of a sudden preview window is not working properly. In some projects it only plays audio with gray screen, in some it doesn't plays at all or plays audio from another projects. Sometimes preview gets frozen with the first frame in the project. I can however play video from Event Library, but without any sound. When I create new project and drag clips from Library, it plays with gray screen and again without sound. Restarting iMovie or Mac is no help. I'm using iMovie 8.0.6
Waiting for help desparatly, thank you

Recorded Audio Not playing back in Premiere Pro

Similar Messages

Maybe you are looking for