Recording Cable TV Shows using Mac Mini

Hi:
does anyone know how to record cable tv shows using Mac Mini?
please discuss the hardware and software issues.
Munir

munirul wrote:
Hi:
does anyone know how to record cable tv shows using Mac Mini?
please discuss the hardware and software issues.
Munir
There are several possible ways, some depend on the type of Cable TV system you have. First I am going to assume you are an American. While Cable TV is available in other countries, for example here in the UK, it ***** so bad in the UK that you are unlikely to be using it here.
Now, with American Cable the first possible method has already been mentioned by others which is to use an analogue connection from your cable box to an Elgato EyeTV 250 (possibly discontinued). This is an analogue tuner for a Mac and will let your Mac record the signal. There is also the more expensive EyeTV 250Plus which includes a chip to do the conversion to MPEG2 and take the load off your Mac. This method will work whether your Cable box is analogue or digital.
If your Cable box uses "Clear QAM" then you could get the HDHomeRun box from Elgato. This not only will provide a direct digital signal with no loss of quality, but will also provide two tuners, and can be shared across your home network. There is also the EyeTV 500 see http://www.elgato.com/index.php?file=products_eyetv500 but this also may have been discontinued.
Finally, if your Cable box has a FireWire connection (and by law they have to give you the option of this) then you can connect the box via FireWire to your Mac and run software on your Mac. Again this will be a direct digital capture with no loss of quality. See the following two pages for information on how to do this.
http://www.ammesset.com/irecord/
http://project-tigershark.com/people/rob/blog/2007/01/14/cable-tv-mac-firewire-h d-pvr/
Note: I am in the UK and have no direct experience of any of the above, and can only gnash my teeth in frustration at how spoilt for choice US TV/Mac users are compared to the pathetic massively DRMed situation here in the UK.

Similar Messages

Using mac mini nearly for 3yrs. From few weeks i feel electric stock over it surface and on keyboard too. I Tested with current tester it showed electric flow

Using mac mini nearly for 3yrs. From few weeks i feel electric stock over it surface and on keyboard too. I Tested with current tester it showed electric flow

H.Kiran wrote:
Thank First
I just plug it to any plug in my house or my friend house before powering mac mini there is electric stock near power button
I took it to apple care center strangely there i could't feel too much as in my house the service center guy recommend me to go with three pin power cable.
I checked my house ground with technician everything is fine
I have another system (Window pc) plugged to same ups no problem
When i plugged my Apple keyboard to mac mini i feel electric stock but when plugged to pc no electeic stock & i tested it with electric tester
I am asking what the result of testing it with the the tester was.

Can you use a digital recorder with Skype on a Mac mini?

Can you use a digital recorder with Skype on a Mac mini?

Have a look at http://www.ecamm.com/mac/callrecorder/

My Adobe Flash CS6 Color Picker has ODD colors. I'm using Mac Mini OSX 10.8.1. Is there a fix?

My Adobe Flash CS6 Color Picker has ODD colors. I'm using Mac Mini OSX 10.8.1. Is there a fix?
I click on the color picker and where I have seen the normal #0000ff blue color on my windows computer, this mac Mountain lion version shows a purple-ish color. Oddly, If I enter the hex # into the color picker, and use it as a fill, the correct color displays on the stage but when i use the eyedropper on that color, it shows it as the purple color again on the toolbar.
I've seen a similar thing like this happen when using adobe photoshop. However, the usual solution is to just make the managed color profile set to monitor RGB. The only downside with Flash is there is no preference to set that. The color palette in Adobe Photoshop displays as it should with the correct blue.
I should also note that I'm using a Samsung 941bw monitor with my mac mini which could also be part of the problem.
I figured i'd make this post anyway just in case it's the OS & Adobe Flash CS6 and not the monitor.
I've included a screenshot as well that shows that i've chosen the purple color and then made a rectangle shape on the stage and it comes out blue.
Thanks ahead for your response(s)
-Line

Seems misleading that on the adobe site for Adobe Flash CS6 it says:
System requirements:
Mac OS X v10.6.8 or v10.7. Adobe Creative Suite 5, CS5.5, and CS6 applications support Mac OS X Mountain Lion (v10.8) when installed on Intel based systems.**

Iphoto on my used mac mini will not open my photos from my new macbook air, it says to update software but there arent any available.. please help

iphoto on my used mac mini will not open my photos from my new macbook air, it says something about updating the software, but i checked and there arent any updates available... please help

Sorry for the second post..
I currently do not have an older version of iPhoto to test this on, but you might also try coping the Originals from the iPhoto Library of iPhoto 11.
To do that;
1. Right (control) click on the iPhoto Library in the Picture Folder on the MacBook Air
2. Select Show Package Content.
3. Click on the Originals Folder
4. Navigate to the disired Event or photos and copy those images to your Flash or External Drive, then copy those to the older version of iPhoto.
Beware do not move, add or delete anything in the iPhoto Library, Apple has intensionally hidden it in later versions to prevent people from messing things up.

No signal to VGA monitor using Mac mini display to VGA adaptor and first time boot Mac mini

Just unpacked Mac mini and powered up using Mac mini to VGA display adaptor and VGA monitor. There is no signal to the monitor ( power is on).
How to see the display?

[ 13.093] (==) No Layout section. Using the first Screen section.
[ 13.093] (==) No screen section available. Using defaults.
[ 13.093] (**) |-->Screen "Default Screen Section" (0)
[ 13.093] (**) | |-->Monitor "<default monitor>"
[ 13.093] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
First step would be to create the necessary entries (easier to make a complete xorg.conf versus xorg.conf.d/##-whatever.conf).
All Desktop Environments / Window Managers rely on X. Man pages are helpful, possibly some headaches ahead as I fought a dual-monitor display this way.
I currently run a xrandr script to switch displays on my hp pavilion: https://wiki.archlinux.org/index.php/Xrandr#Scripts
Check it out.

I want to install Snow Leopard Server on our MacPro (2.66) using Mac Mini Snow Leopard Server disks? I kept getting an error for backwards compatibility. Is this possible or do I need to purchase another copy of Snow Leopard Server?

I want to install Snow Leopard Server on our MacPro(2.66) using Mac Mini Snow Leopard Server disks? I kept getting an error for backwards compatibility. Is this possible or do I need topurchase another copy of Snow Leopard Server?

The OS disks that are shipped with a particular product
are set up so that tey will only install on that product.
It will install on any Mini of that exact vintage, but that
is all.
This is to prevent people from doing exactly what you
are trying to do. The license for OSX shipped with any
is only valid for that product. Also, Snow Leopard,
including Server, is only permitted to be run on one
computer at a time. Bottom line, unlike Lion, legally
you cannot install the same copy on multiple
computers unless some "family pack" or site license
is purchased.
Yes, you need to purchase another copy.
The copy of Snow Leopard license is here:
http://images.apple.com/legal/sla/docs/macosx_snowleopard.pdf

Hi, we are using mac mini's for our developement purpose. connecting the same through using Real VNC. Mac mini's are late 2009 and 2010. Now we have upgraded them to 10.8.5. after upgrading having display issues after launching the simulators

hi, we are using mac mini's for our developement purpose. connecting the same through using Real VNC. Mac mini's are late 2009 and 2010. Now we have upgraded them to 10.8.5. after upgrading having display issues after launching the simulators, we are unable to view the icons we need to move the simulator (into different places) to view the icons.
Also we are having Mac book pro's (Late 2009 & 2010) after upgrading them to 10.8.5. Unable to launch the mac, getting only white screen with apple icon.
Let me know is there any specific Hardware (Graphic Cards) we need to use for the same.
Please provide me the early solutions.
Regards,
Suresh.

Hi, try this first...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.

Please help! We got a used Mac Mini and we don't have the former owner's password, so we can't install anything like flash player. Does anyone know how to get around this?

Please help! We got a used Mac Mini and we don't have the former owner's password, so we can't install anything like flash player. Does anyone know how to get around this? I don't know how to wipe the hard drive, and the support online doesn't seem to work.

As posted previously:
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
If installing Leopard the process is similar in some respects. If you wish to begin anew then after selecting the target disk click on the Options button and select the Erase and Install option then click on the OK button. To install over an existing system do the following:
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

Thinking about using Mac Mini's as desktops for 20 employee business. Pro's Vs. Con's

Thinking about using Mac Mini's as desktops for 20 employee business. Pro's Vs. Con's

Your best bet would be to buy a single 2012 MacMini Server model that you can use to manage the balance of the other machines. Either that or upgrade one of the MM's to OS X Yosemite Server . You can find information about the Server edition at:
https://www.apple.com/osx/server/
However I would STRONGLY recommend visiting your local Apple Store and ask to speak to their business specialist, they are trained to manage customer needs such as yours.
The major advantage of using Macs over any PC is the stability of OS X itself and the overall quality of support that you will never get with HP.

Mac Pro using Mac Mini as Print Server

Hi all,
Mac Pro is wired to my network, Mac Mini is Airport connected.
I'd like to use Mac Mini as a Print Server without keyboard and mouse. I've installed OSXvnc-server on Mac Mini and Chicken of the VNC (CVNC) Client on Mac Pro.
Mac Pro's keyboard is azerty as was Mac Mini, it's impossible to loggin with Chicken of the VNC, password is not accepted, I connect an azerty keyboard to Mac Mini and I can loggin.
Typing on Mac Pro in Mac Mini TextEdit through CVNC give weird keyboard layout, not only azerty qwerty different layout.
In between my two Mac Mini there wasn't any problem using CVNC and the same server but Azerty Qwerty layout.
Is there any other solution to use Mac Mini as a print server ? What about using Desktop remote connection ?
Thanks,
Peloche,
MacPro 2.66, 6GB, 1TB; Mini G4, 1.45, 1GB; iPod 60 GB; 30" & 20" ACD; Apple IIC Mac OS X (10.4.7)

Ah… right! That explains it.
So what model printers are they?
Ned,
Printers are HP Color LaserJet 2550L, HP Photosmart 8250 and Epson EPL-5900L.
I've changed the VNC Client from "Chicken of the VNC" to "VNCThing".
Now I can log in from Mac Pro using its Azerty Keyboard as Qwerty Keyboard.
Once logged in I've set Mac Mini Keyboard to "Extended (or Expanded ?) American" keyboard within System Preferences, with this option Mac Mini see the Mac Pro Keyboard as an Azerty layout...
I've connected two printers through USB2 Hub connected to Mac Mini and the third one direct onto Mac Mini USB port.
Back to Mac Pro "System Preferences Fax & Printers", "+", immediatly the 3 printers have been proposed, I've selected them and tested all: it works perfectly.
Mac Mini is set to "restart after power cut" and is connected for power onto a remoted control power distribution sockets, that means Mac Mini is starting and stopped when printers are powered on and off.
The sole small issue is that I can't find how to display Mac Mini GUI on Mac Pro at a better resolution than 1024 x 768.
Thanks for your time,
Peloche,
MacPro 2.66, 6GB, 1TB; Mini G4, 1.45, 1GB; iPod 60 GB; 30" & 20" ACD; Apple IIC Mac OS X (10.4.7)

Bought a used Mac Mini and can't get past security password Seller refuses to answer emails. is there a keyboard command to take it back to factory settings or do I need to buy a Disc set and OS???

bought a used Mac Mini and can't get past security password Seller refuses to answer emails. is there a keyboard command to take it back to factory settings or do I need to buy a Disc set and OS???

You can bypass the password and wipe the drive and return to the original facory installation if the seller included the orginal install DVDs with the Mac mini. If not you will need a retail version of Mac OS X. To boot from the Install DVD restart the mini, immediately slip in the DVD and press and hold the C key.

USING MAC MINI, IPHOTO PICTURES TRANSFER TO EXTERNAL HD

im using mac mini, how to transfer iphoto pictures to external hard drive?

Close iPhoto.
Use finder to copy your iPhoto Library to your external drive.
Hold down the option key while you start up iPhoto.
IPhoto will ask you to select a photo library. Point it to your library on the external drive.
Once you verify everything is working properly you can delete the iPhoto library from you internal drive if desired.

Bought Used Mac Mini...need help to change email for updates

Purchased an used Mac Mini and I want to change my defaults to my name and get rid of the sellers name, I also need help in changing the email default for getting my updates from Apple. That's the most important to me... I've got 5 updates waiting and the message I receive is to get my updates from the sellers email address. Thanks!!!

What OS is on your Mini? What year/model is the Mini? The seller should have reinstalled the OS that came with the Mini instead of just selling it to you as is.
Once you determine the OS, you can erase your Mini's Macintosh HD and reinstall the OS which will allow you to setup your own account during the Setup process.

How to use Mac Mini Server as NAT with only one port??

How to use Mac Mini Server as NAT with only one ethernet port??

But why did apple sell me this server that does NAT with one port? I don't get it.

Recording Cable TV Shows using Mac Mini

Similar Messages

Maybe you are looking for