Recording time lag

my earlier problem (of audition recording the content of all tracks to the track i was trying to record only mic input to) seems to have more or less solved itself (but thanks anyway to ryclark). now i have another problem: when i record mic input it records with a time lag so it's out of synch with the music backing track.
i've tried tweaking just about everything (buffer size, synch reference, offset) but nothing seems to cure this. it happened to me once before but i can't remember how i fixed it. anyone have any ideas?

I'm having the exact same problem.  I'm using Audition 1.5 to record guitars for my band and when recording in multitrack there is a very short lag between what I'm playing and when it gets recorded.  So when I listen back to what I recorded, it's out of sync from the rest of the tracks.  I've tried everything the OP said as well and nothing seems to work.

Similar Messages

  • How much recording time on my iphone 4 voice memo?

    How much recording time on iphone4 voice memo?

    I would suggest that it depends on how much free space you have on the phone. I have done voice memos of over an hour before, and have read of other users reporting larger ones. I do not believe there is any documented source of what size you can do.

  • Asset Master Record - Time Dependent tab - locations to be created

    Hi Guru's
    Hot to create the new locations in the Asset Master Record - time dependent tab.
    Some locations descriptions I need to change.
    Please help me.
    Regards
    Jenny Connes

    Hi,
    change your location description at following SPRO location:
    SPRO->Enterprise Structure -> Definition->Logistic - General ->Define Location
    Thanks,
    Dharmesh

  • How can I add recording time to a single recording not a series recording?

    If I set-up a series recording it allows me to add minutes to the recording time why can't I add time to a single recording? For example if I want to record a single show tomorrow I find it on the guide and hit record. Now I want to add a few minutes on the end of the show because I know it always runs over it's advertised time why can't I add the time? It doesn't gives to extra options for a single recording. The only time I can add time to a single recording is if the show is currently on then it allows me to add time but, not before the show is on. So what good does that do? Comcast allowed me to set-up extra options to a single recording.

    Actually you can.  It's a bit clumsy but what you have to do is go to the DVR menu, select scheduled reordings, select the recording you want to extend, scroll through the menu and you will find an option to modify the start / end time.
    If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

  • How do I create a delay or time-lag for my data in LABVIEW

    In my data acquisition system I am using acquired data to create an digital output. I want to delay this output or create a sort of time lag for it. Is there any easy way to incorporate this?

    What you might consider doing is using a sequence. Run the data through this sequence and inside of the sequence, put a delay equal to the time you wish to delay the signal. Then, the output will not be available until the delay has completed.
    If you need continuous streaming data, this might not work too well. Then, you will need some sort of a data buffer - perhaps using a queue might be one possible solution. I have not used it, but I think that queues can have a time stamp. You could possibly artifically alter the time stamp.
    Hope this helps,
    Jason

  • Set maximum record time?

    Can I set maximum record time in Logic 8? Recording an hour-long live program unsupervised, & I'd like it to stop afterwards.
    (I don't know any problem with continuing recording for hours until the hard drive is full? But it's not necessary.)
    thanks

    You can use the Auto-Punch In/Out function to set Logic stop recording automatically.
    Also, set the bar value for the project end (at the transportbar, under the tempo).
    For How long you can record depends on you HD capacity, but also the file format (aif,wav,caf...) the bit depth and the sample rate.
    each format has its own limit.
    Refer to user manual and check for the best file format for your purpose.

  • Time lag

    something terrible is the i OS 7, all interface such as big time lag and it is on iPad with retina!! It’s really sad that Apple started to do such mistakes…
    iMessage is individually part, there is no iMassage on iOS 7 it's simply to say))) we have a lot of apple devices in our family and each of them have a problem with iMessage.
    Safari crash , another problem... My iPad decided to reboot today himself))) ITS TERRIBLE!!!!!!!!!!!! PLEASE STOP IT!!! i os 7 such as android with samsung good hardware and awful software...i disappointed

    Mine does the same thing. It has to do with where it stores the music in memory I believe. It has to go to the location in memory and load all the screens and content. Same thing is true of any flash drive. In essence your iPod touch is just a big fancy flash drive.

  • Recording time on a CD

    I am having trouble trying to burn a CD. All of the tracks I have selected for the playlist are tracks that I have imported into my music library. None of them were purchased. My blank CD is capable of 80 minutes of recording time. The tracks I have selected total 73 minutes and 22 seconds. When I select "burn" I get the message that says all of the tracks will not fit on one CD. I do not understand why I am getting this message. Is anyone else having this problem. If so, what can be done to correct it? Any help would be greatly appreciated! Thanks!

    DJ Snoopy wrote:
    I am having trouble trying to burn a CD. All of the tracks I have selected for the playlist are tracks that I have imported into my music library. None of them were purchased. My blank CD is capable of 80 minutes of recording time. The tracks I have selected total 73 minutes and 22 seconds. When I select "burn" I get the message that says all of the tracks will not fit on one CD. I do not understand why I am getting this message. Is anyone else having this problem. If so, what can be done to correct it? Any help would be greatly appreciated! Thanks!
    Do you have anything set for time between tracks in the "Burning" preferences?
    Strange, considering an "80 minute" CD typically holds about 78 minutes worth of audio.
    Steve

  • Extending recording time/length for each track?

    Hello Any and Everyone!
    I would like to know if someone can help me out with what I am to do about extending the recording time for each track? I have found nothing as of yet that explains to me how to do it in the manual or in the application itself. It is standard 15 minutes and that's it. It may be and probably is a simple thing but can someone help me? Thanks.
    Wazzmatic

    Hi,
    If I'm not mistaken, you should check the preferences.
    Click 'Audio' or 'Recording'. There you should find a field where you can setup the desired recording time for all your projects....
    As far as I know, you cannot setup independent rec. time for each chammel/track.
    Hamm.Nrd

  • Oracle 9i dataguard time lag monitoring script

    In 10g we can run below script on Standby to find out time lag between Primary  and standby .
    select name, 'ALL', substr(value,1,12) from v$dataguard_stats where name = 'apply lag' ;
    select name, 'Seconds', to_number(substr(value,11,2)) from v$dataguard_stats where name = 'apply lag' ;
    select name, 'Minutes', to_number(substr(value,8,2)) from v$dataguard_stats where name = 'apply lag' ;
    select name, 'Hours', to_number(substr(value,5,2)) from v$dataguard_stats where name = 'apply lag' ;
    select name, 'Days', to_number(substr(value,2,2)) from v$dataguard_stats where name = 'apply lag' ;
    But while running same script in oracle 9i stanby database i am getting below error;
    ORA-01219: database not open: queries allowed on fixed tables/views only
    Can i know which command i should use to monitor time lag between priamry and standby in oracle 9i?

    Hi,
    You can Query from v$archive_gap :Dynamic Performance (V$) Views, 9 of 238
    select * from v$archive_gap;
    HTH

  • Info Package load 'Time Lag'

    Hi Experts,
    Is there a table which holds information about time lag of a info package run.
    If yes which field of dat table gives this information ?
    If there is no direct method, is there a indirect method to derive it from any table.
    I badly need to get it from a table, coz I need to document this for lot of info packages, and if I do it manually it takes lot of efforts (going to "details" tab of every info package run and all dat stuff..)
    Points would be awarded for sure.
    Thanks,
    Mihir

    Hi Mihir,
    Check table: RSMONICTAB -- Monitor, Data Targets(Infocube/ODS) Table, request related info and
                       RSMONIPTAB -- InfoPackage for the monitor
    and also you will get load details from statistics.
    More info at: [BW Useful Tables|http://sapbwneelam.blogspot.com/2007/08/bw-useful-tables.html]
    Hope it Helps
    Srini

  • How can I reduce the recording time of the webcam?

    How can I reduce the recording time of the webcam?
    thanks
    Alex

    Keep in mind that Logic also has a limit of 8550 quarter notes. So changing the time signature to 4/8 can get longer recording times. So make sure you change this setting along with the song end. See page 93 in the reference manual.
    MBP 1.83 & MDD 1G DP   Mac OS X (10.4.7)   Logic Pro 7.2.2, Motu 828MkII+828, Firebox LC&XT, Tranzport, Unitor8+(3x)AMT-8's

  • How to display the real recording time of day in a video?

    I want to create a video in which the real recording time of day is displayed though the whole video.
    I already tried with the timecode generator, but this shows the time progress of the video being played back. What I need is the real recording TOD of every scene even after lots of cuts and trims and even after changing the clip speed.
    Does anyone have an idea, how this could be accomplished?

    Hi Wei,
    As far as I know the parent key needs to be initial for the top row. A workaround would be to create an additional attribute and fill it with an artificial parent key. In case you are using a DDIC structure at the node in question, you could add a sub node of 1:1 cardinality and place the attribute there.
    Best regards,
    Thomas
    P.S: I forwarded your question to a colleague of mine who happens to be the expert for the table. Perhaps he knows another solution.

  • Record time not showing in approval tab for user

    Hello Gurus,
         It a very strange kind of issue. As you can see in the screenshot , the first approval has approved the PO and then ideally it should go to the second approver and it happening but while checking in the portal we can't see the record time in the portal , Also user has to approve the PO several times which is making the user unhappy . So how to remove this bug . While more to add we are working on ACW with custom BADI's (copied of standard with addition condition). Can anyone tell me why its happening.
    Thanks
    Gaurav Gautam

    Hello Gurus,
         Any idea on this.. Konstantin Anikeev , Laurent Burtaire 
    Thanks
    Gaurav Gautam

  • Record time duration for fax in vxml

    I am going to get the time duration used for fax sending in vxml:
    <transfer name="mycall" destexpr="'fax://' + phone_num" bridge="false" connecttimeout="120s" maxtime="180s" cisco-longpound="true" cisco-mailtoaddress="'xxxx'" >
    <catch event="telephone.disconnect.transfer">
    <assign name="mydur" expr="mycall$.duration"/>
    <goto next="#timeCount"/>
    </catch>
    </transfer>
    <var name="startTime" expr="new Date();"/>
    <var name="endTime"/>
    <form id="timeCount">
    <block>
    <assign name="document.startTime" expr="startTime.getTime();"/>
    <assign name="document.startTime" expr="Number(startTime);"/>
    <assign name="document.endTime" expr="new Date();"/>
    <assign name="document.endTime" expr="endTime.getTime();"/>
    <assign name="document.endTime" expr="Number(endTime);"/>
    <assign name="mydur" expr="document.endTime - document.startTime;"/>
    </block>
    </form>
    But mycall$.duration is 0 after transferring fax.
    And even if I use codes to count time duration, the duration, mydur, is about the same regardless of the number of pages sent.
    Is it possible to use vxml to record time duration of fax?
    Thank you!

    Paste the following Config:
    sh ver
    sh run
    debug of one call demonstrating the problem :
    debug voip ivr all
    debug vxml all

Maybe you are looking for