Records are not getting updating in to Data Targets
hai friends...
IN RSMO AFTER THAT STATUS BAR.....IN THAT --> Request successfully loaded into PSA - start further update
Diagnosis
The request has as data target "only PSA". It arrived there successfully.
System Response
The request has not yet been updated into the data targets.
Procedure
You can now trigger the update manually. The final target is determined in the request tables. You do not have to make any further settings.
TO Load data in to DATA Targets succefullly? what should i do?
ADMIN TEAM: Dont delete the thread until i get solution please...
Edited by: Bi_Madhavi on Sep 9, 2010 7:56 AM
This is very basic thing in BI. You must know about it before start working in a BI project. Please do not flood the forum with the basic questions
Edited by: Pravender on Sep 9, 2010 11:36 AM
Hi,
If you are in BI 7.0,then execute the DTP.
and If you are in BW 3.5 ,then go to psa select your request and press the button shedule."(you will get this buttton near to delete option for psa).
Thanks,
Saveen Kumar
Similar Messages
-
HIREDATE & FIREDATE of Employee are not getting updated in t-code PA20.
Hi all,
HIRE DATE & FIRE DATE are not getting updated whenever the data of an employee loaded into SAP T-Code PA20 .
And even the input data contains the both the fields HIRE DATE & FIRE DATE
Can any one please suggest us why its happening.
Thanks,
Lava.Hi Girishkg,
The default IIS limit for the upload file size is 30MB. If the selected files are larger than 30MB, the files are not uploaded.
The limit can be set in web application’s web.config file or in IIS .
There are two detailed articles about setting the limit:
http://www.brainlitter.com/2009/07/13/sharepointcannot-upload-documents-larger-than-30mb-on-windows-server-2008-or-sbs-2008-application-servers/
http://expectedexception.wordpress.com/2011/02/08/upload-multiple-files-fail-without-error/
Feel free to reply if the issue still exists.
Best regards
Wendy Li
TechNet Community Support -
Few keyfigures are not getting updated in the backup cube
Hi,
We run the daily backup process chain which extract data from planning
area and store in the cube & ods.
There are infopackages which update cube & ods, the datasource & info
source is same for both ODS & backup cube.
But a few keyfigures do not get updated in backup cube where as we see
ODS getting updated for those keyfigures. Also there exist data in the
planning area for these keyfigures.
There is direct mapping between the keyfigures in cube & planning area.
We tried to debug it and noticed that data gets updated in update routine table but not get updated in cube.
There are total 25 keyfigures in the cube , out of this only 5 keyfigures are not getting updated.
Need expert opinion on this.
Regards,
ChetanaHi Chetana,
Check the backup step in your process chain. The Data Selection tab may have certain conditions on account of which certain keyfigures in your Backup Cube are not getting updated.
Check if any ABAP routine or any selection conditions are maintained which are causing certain keyfigs to be excluded.
~Rishi -
Taxes are not getting updated in PO
Dear All,
I have done some changes in pricng and tax calculation procedure.
But for old POs the calculations are not getting updated when i sees at invoice tab in PO. To make affect the same I need to unrelease the PO, SAVE and again release the PO.
Is there any other way for updating the tax calculations at invoice tab in PO.
Regards,
Rakesh>
Rakesh Shelar wrote:
> Dear All,
>
> I have done some changes in pricng and tax calculation procedure.
>
> But for old POs the calculations are not getting updated when i sees at invoice tab in PO. To make affect the same I need to unrelease the PO, SAVE and again release the PO.
>
> Is there any other way for updating the tax calculations at invoice tab in PO.
>
> Regards,
> Rakesh
Only other way possible is abap script to be made to change Po data without changing the release. Otherwise you need to unrelease the Po's first, then change the data and then save for your changes to get affected. -
Values are not getting updated in sales report
I have configured sales information system, and i have been trying to run sales report but values are not getting updated in sales report, System will through message that no data exists.
regards,
thooyavanHi,
Please check with the Customer and Material Statistics group in the Customer and material master respectively.
Further check with the LIS settings (Sales Area combination with the Update group).
Reward points if this helps you.
Regards,
Harsh -
Changes to Excel files are not getting updated
File updates not reflected. I modified content, added data validation and saved the file back - next day file is still the way it was before modification.
Other file, another site but similar situation.
Content changed - form added but next day the change is not reflected. File updates not reflected. I modified content, added data validation and saved the file back - next day file is still the way it was before modification.
Other file, another site but similar situation.
Content changed - form added but next day the change is not reflected.Hi,
According to your post, my understanding is that changes to Excel files are not getting updated.
I recommend to configure Excel Services data refresh by using Secure Store and an external Office Data Connection (ODC) file.
For more information, you can refe to:
Configure Excel Services data refresh by using external data connections in SharePoint Server 2013
If you use PowerPivot, you can refer to:
Refreshing PowerPivot Data in SharePoint 2013
If you use Office Web Apps, you can use New-SPWOPISuppressionSetting -extension xlsx -action view to refresh data.
You can refer to:
PowerPivot for SharePoint - Browser Refresh Fails (Data Refresh not supported in Office Web Apps)
In addition, here is a similar thread for your reference:
http://social.technet.microsoft.com/Forums/office/en-US/2c4009f3-62bc-4af0-9e16-e40e9d418e3b/user-changes-to-sharepoint-documents-lost
Best Regards,
Linda Li
Linda Li
TechNet Community Support -
Backened documents are not getting updated in Classic Scenario
Hi,
We are using SRM 7.0 version and we are working on classic scenario where the shopping cart - RFX - Contract are created in SRM and the PO - GR - IR are created in ECC. The blackened documents which are created in ECC PO - GR and IR these documents are not getting updated in SRM system.
Is there any business functions to be activated.Hi Sunil,
You manually run report ""BBP_GET_STATUS_2" after PO is created in MM. Then check if the follow-on-docs are updated in SC.
If it is working fine after you manully run report, you will have to properly set time to run this report automatically.
Best Regards,
Anu
Edited by: Anuradha UG on May 18, 2010 8:09 PM -
Values are not getting updated in 'stocks App' in my i4 phone. What is the solution?
values are not getting updated in 'stocks App' in my i4 phone. What is the solution?
you have encountered activation lock. Read iCloud: Activation Lock
-
Exchange Mails are not getting updated properly without refreshing
From couple of days, exchange mails are not getting updated properly without refreshing.
Kindly suggest.Kindly suggest a solution
-
Reputation points are not getting updated..!!
Hello Community,
TITLE: Reputation Points are not getting updated.
I think the reputation points are not getting updated as I noticed that there was two likes on my comment in two different discussion but I did-not see any points increase in my profile, I am not sure if any one else is experiencing the same.!!
Regards
KumarThanks Jason, probably I missed the announcement.
Regards
Kumar -
Registers are not getting updated
Dear all,
I am new to CIN.
My Problem is that RG registers which need to be up dated while reciving the excisable material are not getting updated, or else i am not finding way to see them. can any one help me?
PrabhashHi
Refer the link
http://help.sap.com/saphelp_47x200/helpdata/en/de/8b6a158bef9844b00635a468856274/frameset.htm
Regards
Ramakrishna -
Date and time fields are not getting updated in database
Hi,
I am Using the bapi SD_SHIPMENT_HEADER_CHANGE in my program ...
I am using bapi_shipemnt_create for creating shipment document but, trying to enter the date fileds using this bapi .
can anybody please tell me how shud i pass this variables exactly ...
i tried giving test data and checked this bapi .. the result in changing parameters is also appearing but in databade itself the date fields are not getting reflected ...
The fields ate DTDIS ,UZDIS, DATEN,UATEN. ( i am trying to map these fields in changing parameters)
gw_vttkvb_new-mandt = sy-mandt.
gw_vttkvb_new-tknum = gw_return-message_v1(passing shipment number )
gw_vttkvb_new-dtdis = gi_ship_doc-dtdis.
gw_vttkvb_new-daten = gi_ship_doc-daten.
gw_vttkvb_new-uzdis = gi_ship_doc-uzdis.
gw_vttkvb_new-uaten = gi_ship_doc-uaten.
APPEND gw_vttkvb_new TO gi_vttkvb_new.
CALL FUNCTION 'SD_SHIPMENT_HEADER_CHANGE'
EXPORTING
i_tvtk = '
I_DESTINATION =
I_DEPARTURE =
OPT_DIALOG = 'X'
IMPORTING
E_SERV_AGENT_FROM_DELIVERY =
E_ROUTE_FROM_DELIVERY =
E_LEG_DETERMINATION_DONE =
E_NUMBER_OF_CHANGED_LEGS =
TABLES
c_xvttk = gi_xvttk
c_yvttk = gi_yvttk
c_xvttp = gi_xvttp
c_yvttp = gi_yvttp
c_xvtts = gi_xvtts
c_yvtts = gi_yvtts
c_xvtsp = gi_xvtsp
c_yvtsp = gi_yvtsp
c_xvbpa = gi_xvbpa
c_yvbpa = gi_yvbpa
c_xvbadr = gi_xvbadr
c_yvbadr = gi_yvbadr
i_xtrlk = gi_vtrlk
i_xtrlp = gi_vtrlp
I_DEPARTURE_SEQUENCE =
I_XVTFA =
I_YVTFA =
CHANGING
c_xvttk_new = gi_vttkvb_new
EXCEPTIONS
invalid_change = 1
route_insert_failed = 2
tdlnr_insert_failed = 3
status_planned_failed = 4
status_registrated_failed = 5
status_loading_start_failed = 6
status_loading_end_failed = 7
status_completion_failed = 8
status_shipment_start_failed = 9
status_shipment_end_failed = 10
OTHERS = 11.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ELSE.
**** Save shipment created
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
WAIT =
IMPORTING
return = gw_return.
ENDIF.
Regards,
shilpa talluri .Hi,
Try this
DATA: wa TYPE zvariant.
wa-mandt = sy-mandt.
wa-z_var = 'test'.
wa-projid = 'test'.
wa-relid = 'test'.
wa-srtf2 = 'test'.
wa-clustr = 'test'.
wa-clustd = ''test'.
INSERT zvariant CLIENT SPECIFIED FROM wa.
Raul Natu -
Delta Records is not getting updated in delta queus when changes done
Hi All,
In Quality system , when a user makes a change to an order's ship-to address, the changes are "triggering" a delta record into the delta tables for BI to extract. This can be seen via tcode rsa3's delta tester.
In Productionn System, when the user makes the exact same change, nothing is added to the delta table and the changes never come over to BI unless a full extract is request for the order.
Why changes not getting updated, please give your inputs.
Thanks & Regards,
Venkat Vanarasi.Do you have your V3 update job active and running? THis job wites changes to the delta queue. Of course your datasource has to been initialized and a delta queue should be setup. You can check it in RSA7.
Regards,
Juergen -
CPS parameters are not getting updated in SAP
We have recently migrated our SAP and CPs servers, after that we are facing few CPS issues and it is affecting lot of key batch jobs. One typical example is given below.
CPS is supposed to trigger a job DD simulation, by copying the SOURCE_DATE_ID -1-Dec-2006 and modifies the parameters BUDAT and FAEDA_HIGH. The parameter FAEDA_HIGH is calculated as time.now()+ 5 working days as defined in the expression. When we try to run the job today with the date 24 Dec 2010, CPS has calculated the FAEDS_HIGH correctly as 2-Jan-2011. IN SAP the variant gets created but for the field FAEDA_HIGH the date value is not getting updated properly it is display some other date. (e.g) It is showing as 4-jan-2011, I removed the xpression and gave another date for the FAEDA_HIGH field as 10/01/2011, but in SAP it is not getting updated.
Has anyone faced similar kind of issue. share you experience
Regards,
Ramprasad.Hi ,
PLease find attached out XBP version
XBP connection pool for SAP system ISU
XMI interface version : 2.0
Since we have taken backup and restored the SAP Database, the CPs transport file already exists in the System.
Basically what happens is
So actually what is happening is, the CPS parameter FAEDS_HIGH expressions are not used for due date calculation.. CPS just copies the source date-id to target id and similarly for the due date based on the difference
source_id variant date 01-12-2006 due date 02-12-2006 ( Next day)
Target_id Variant date 25-12-2010 due date 26-12-21010 ( Next Day)
I tried changing the Source date id from 01-12-2006 to 24-12-2010.
Source Variant date 24-12-2010 due date 04-01-2011 ( 10 Days)
Target Variant date 25-12-2010 due date 05-01-2011 ( 10 Days)
Regards,
Ram -
CJ20N-fields are not getting updated in table PROJ
Hi all,
I have a requirement where I need to transfer the WBS element data created in one system to another using IDOC.
The idoc has generated sucessfully and was also sent/processed successfully in the recieving system but fields STSPD and STSPR are not getting poulated in table PROJ.
In the confic I have assigned FM:IDOC_INPUT_PROJECT to the process code.
Thanks,
GauravHi,
Please check with the Customer and Material Statistics group in the Customer and material master respectively.
Further check with the LIS settings (Sales Area combination with the Update group).
Reward points if this helps you.
Regards,
Harsh
Maybe you are looking for
-
How to make RAID1 of two 750GB HDDs with 945P NEO3-F
I have a PC with this MSI 945P NEO3-F MB and currently two new 750 GB Samsung SATA2 drives in it. The MB is some 18 months old but I just got the two HDDs today. What I would like to do is set these two HDDs in RAID1 so that I wouldn't loose any data
-
Macbook air display problems in vista
i got a macbook air, and i installed vista on it and it worked fine....2 weeks later i power up vista only to find the screen format is out of wack, it has 2 black lines on the side, the kind of lines when you watch 4:9 on a 16:9 screen, its basicall
-
Unable to send emails via Nokia Messaging
I have had the device for about 3 months and I have never had problems sending emails before, however over the last 3 days when I try and send an email it just sits in my outbox and then after a while it says failed. I receive emails fine so this is
-
Adobe Edge Runtime conflicting with Wordpress menu
I finally managed to manually insert an Adobe Edge animation thanks to vivekuma and also by following this article. It seems I needed to change several paths in edgePreload.js and edge.js. I am however facing a new problem... I created both a page an
-
hii can any one explain related to SUPPORTING IN FICO 1.what are the activities which are under taken in supportin an project