Recover after zpool add -f ? Is it possible?
Hello.
Recently I've upgraded one of my machines to OpenSolaris 2009.06; the box has a few HDD: 1) main with OS, etc and 2) archive and ...
After installing I created users, environment, etc on HDD(1), and then wanted to mount the existing ZFS for the rest. And by a mistake, for (2) I did zpool add -f space c9d0.
zpool import -D shows nothing.
zpool list shows for this drive
space 696G 76K 696G 0% ONLINE -
So. The question is simple. Is it possible to recover it?
Thanks.
Here is a thread with some workarounds
Similar Messages
-
After I add a new PC to synchronize Outlook contacts and calendar with icloud, another PC/Outlook stops synchronizing that had been working fine. Does anyone know why this happens repeatedly? Is there a limit to the # of PCs that synchronize with iCloud
Not possible.
-
XSERVE RAID Disk Failed to Recover After Reset...
Greetings,
I've got an PATA XSERVE RAID with 14x250GB Dries setup as RAID 5.
Last week event monitor reported that Disk 14 Reported An Error Command 0x35 ERROR 0x10 STATUS 0x51 LBA 0X3978B80.
Not having a spare Drive available, I ordered one and Reconditioned the Raid Using the RAID Admin Tool. 3 days later it reported all as well. This morning my new ADM arrived and before I could replace Drive 14, it started generating basically the same Error.
So I swapped in the New Drive, and it began to rebuild, now here's the kicker...
After a few minutes it started giving me this ERROR:
DISK 14 FAILED TO RECOVER AFTER RESET. RETRYING
then...
DATA WAS LOST DURING A REBUILD.
It continued to repeat these messages until it Finally reported:
DISK 14 OFFLINE
So, I thought it must be a bad Drive, So I figured let me kill 2 birds with 1 stone and swap out a drive I had working fine in an XSERVE. So I ejected the new drive from the XSERVE RAID and Replaced it directly with the Drive from the XSERVE (Also 250GB) And...
It did the Same exact thing, same errors, etc.
So what's going on?
RAID ADMIN reports all Components OK
Any help is appreciated.
Thanks
LJSOK, So replying to my own issues here...
So I've replaced the Lower Controller and updated the firmware on that Controller.
The I ejected disk 14, waited a minute or 2, then re-inserted the Disk, then made it available for use.
It attempted to add to the existing RAID and the errors started all over again (See 1st post)
So apparently it wasn't the controller.
So I figured it must be the RAID Set itself, so to be sure, I swapped Drive 8 with Drive 14.
Deleted the ARRAY and Re-Created it, it's building now and Now Drive 8 is offline, So it would appear to be the drive, but I already replaced it with a known working drive, a new one from Apple, and then one directly from my XServe (See 1st post)
So I'm just baffled at this point.
LJS -
After installing iOS5, it is not possible anymore to edit the contacts. Has anybody a solution?
After installing iOS5, it is not possible anymore to edit the contacts. Has anybody a solution?
Settings-iCloud-contacts=on.
Reopen contacts, should b able to edit and add. -
iPad running iOS 5 has on the menu bar only have 4 icons, being: back, forward, bookmarks, and the "add to bookmarks", but is missing an icon after the "add to bookmarks" arrow, that is a "show all open browser windows" icon. How do I get it in my safari?
What you are seeing is how Safari works now in iOS 5. There is no way to get that icon in Safari now. There other much better browsers available in the App Store. Look at iCab Mobile, Mercury, Atomic, ....
I have been running iOS 5x for so long now, that I don't even remember if that icon did appear in earlier iOS versions -
Using Time Machine, is it possible to back up a computer AFTER a specific date. I only want to back up files from AFTER January 2015. Is this possible, and how can I do this?
emilypdunne wrote:
Using Time Machine, is it possible to back up a computer AFTER a specific date. I only want to back up files from AFTER January 2015. Is this possible, and how can I do this?
Is what you're saying that you only want backups in TM of the state of your Mac from January 2015 to the current date and nothing before then? I'd think the simplest solution would just be to delete in TM all the backups prior to 1/15 and then let TM do its thing. The ultimate source for all things Time Machine is here. On this page, note the comment that "Time Machine will never delete the backup copy of anything that was on the disk being backed-up at the time of any remaining backup" which I understand to mean that if you delete all the backups in the TM file prior to 1/15, any file that wasn't present on your Mac as of 1/15 will no longer be represented in the TM file. Note that the second link also has instructions for how to delete TM files.
If you were trying to accomplish something else, then as Emily Litella (Gilda Radner in SNL) used to say, "never mind." -
In Mac Firefox 10.0.2, is there a way to import/merge Mac Firefox 3.6.13 and 3.6.15 history (not just bookmarks), and history recovered after crashes, and if so, how? Thank you!
You can find the Import menu entry in the Bookmarks Manager (Library)
*Bookmarks > Show All Bookmarks > Import & Backup > Import Data from Another Browser
*http://kb.mozillazine.org/Import_bookmarks
Import & Backup is the third button on the toolbar in the Library that looks like a star.
You should be able to export the bookmarks via that button.
See also:
*https://support.mozilla.org/kb/how-do-i-use-bookmarks -
Firefox creates a new dock icon after an add on updates
Often, after I update an add on, Firefox creates a new, temporary icon in my dock. The old icon is still in the dock and clickable to reopen Firefox, but once Firefox opens, the temporary icon reappears unless I replace it with the new icon after every update.
== This happened ==
A few times a week
== I think about a year ago, but only after an add on updates and I don't know if it happens with all updates or not.can't believe that i was the only person to have the problem, but no replies whatsoever suggest i was. have now upgraded to 5.0 where the problem has not yet reoccurred.
-
I already have creative cloud Photography plan and just want to add dreamweaver, is this possible? Alternatively, I have tried purchasing the Complete — For CS Customers but it asks me to contact customer support and then sends me through to the forums!!
yes.
contact adobe support by clicking here and, when available, click 'still need help', https://helpx.adobe.com/contact.html -
New to the Apple and I want to set up a user account that will not delete the guest users files and allow and preserve their personal settings after log out. Is this possible?
The built-in guest user account will not do this. Simply create a new standard account and call it "Guest" or "Guest Users" or whatever you like.
Go to System Preferences > Users& Groups, click "+" to make a new account. -
Why after I add a object to a list, the whole list changes?
I tried to call the add method of ClientList from a jsp webpage,
by looking at the log file, i found that for the 2nd time insert an Object into clientlist (say
client 1 is: IPAddress= 167.30.22.33
client 2 is IPAddress=167.30.22.44), what i get from the system log is that I have two
167.30.22.44 in the list, the first one is gone,
after I add the third item, the list just contains three identical third item, the former two are gone,
What 's wrong with my code? From the system log, I know that the parameters passed to the method clientlist.add are correct.
thank you.
My code is like this :
public class ClientList {
ArrayList<Client> listitems = null;
int numberOfItems = 0;
public ClientList()
items = new HashMap<String, ClientListItem>();
listitems = new ArrayList<Client>();
public synchronized void add(
Client cl) {
if (items.containsKey(cl.getIPAddress())) {
ClientListItem clitem = (ClientListItem)items.get(cl.getIPAddress());
clitem.incrementQuantity();
} else {
System.out.println("clist.add called: " + cl.getIPAddress() + "\n");
ClientListItem newItem = new ClientListItem(cl);
items.put(cl.getIPAddress(), newItem);
listitems.add(cl);
for (Iterator i = listitems.iterator(); i.hasNext(); )
Client clt = (Client)(i.next());
System.out.println("after adding : " + clt.getIPAddress() + "\n");
}I'm willing to bet that what is happening here goes as follows:
// Step 1: Create a client 1 object
// Step 2: Call add with this client object creating a string key with a client value
// Step 3: redefine the data in the first client object with the data for the second
// In this step you probably did not create anew client object, but simply
// changed the data in the original
// Step 4: Call add with the "redefined" client object comparing the string key with
// some data from the client, determining it is not in the list adding it againWhat the above does (if this is the way you are doing it) simply places the same client
object into the hash twice with two different keys. And in step 3, by changing the original object,
you also changed the object already in the hash, because as already said, they are the same object.
Edit: And nevermind, jverd already said this. ;-) -
How to use "sequence" after we add new data ?
Dear all :
Could someone tell me how to increase the number after we add new data and put the number into one field per time ?
Thank youIn the Initial Value property for an item on a block, you can assign it to a sequence value. Just put the name of the sequence in the Initial Value:
Specifies the default value that Form Builder should assign to the item whenever a record is created. The default value can be one of the following:
Here's the part of the help screen for Initial Value that shows how to assign a sequence.
raw value (216, 'TOKYO')
form item (:block_name.item_name)
global variable (:GLOBAL.my_global)
form parameter (:PARAMETER.my_param)
a sequence (:SEQUENCE.my_seq.NEXTVAL)
Dave -
How do I access files that have been recovered (after a Mavericks problem) with the .cca file extension
First, to access documents you must use an app designed for that specific Document type. So Pages will not be able to open PDFs. The Documents app by Readdle can handle PDFs though. In the latter case, you'd open the app, click the menu icon at its top left, and click Open to go to your iCloud Drive. With Pages, if you had files outside the main Pages folder, click + then iCloud and navigate to the file's location.
Matt -
HT204022 how do i delete photos from camera roll after i add them to specific folders ?
how do i delete photos from camera roll after i add them to specific folders ?
Camera roll is the master list of all photos in the app. When you place a photo in an album, it's still in the camera roll.
-
Firefox freezes after I add a bookmark
After I add a bookmark Firefox freezes. It starts as soon as the save bookmarks dialogue box appears so I can't choose where to save the bookmark but after the freeze ends (about 20-30 seconds) the bookmark has been saved.
I also have another problem that might be related. After I delete a bookmark it takes a while for the bookmarks sidebar to update so when I click on a bookmark I am selecting either the previous or following bookmark, depending on where the dleted bookmark was.OK, I understand now. Just go to Firefox preferences and turn off Hardware Acceleration.
It was OK in safe mode but when I restarted Firefox was frozen so I had to force quit, restart in Safe Mode and turn Hardware Acceleration back on.
Thanks for your suggestions.
Maybe you are looking for
-
Integration: how to best access and run SAP through Portal
We are currently using Oracle Portal for publishing reports directly from our EDW, for giving access to some applications and for delivering unstructured information. In the future we are very likely to give our suppliers and employees access to repo
-
How do I change the iTunes account affiliated with my device?
When I unpackaged my iPhone 4 at home, I put music on it with my sister's iTunes account, I did not have one. Now that I have my own, I can't add music to my device, because I can only have one iTunes account registered to my phone. How do I change i
-
My itunes wont load and just says error
I try to load up my itunes store and it just come up with (we could not complete your itunes request. An unknown error has occurred (0x800B0101)
-
I can't get the website I supposedly needed Mozilla Firefox to come up.
I need to SPEAK to someone. Time is of the essence. I was told I needed this Mozilla Firefox to get to veracity.allegiancemd.com/login but it doesn't come up.
-
Help needed on multi-level photo folders on iPhone
In trying to figure out how to create sub-folders for photographs on an iPhone, the bottom line seems to be that it's not possible. You can synce to ONE folder on a PC, and that folder can contain many folders, which will appear on the iPhone, but y