Recover my lap

Hai I was watching the movie in my hp lap, movie not played correctly.. I suddenly off my hp lap.. Once I on my lap it is not working.. It showing as hard disk error.. But it is working.. I try to install a new os.. I can't .. Provide me the solution..

Sounds like the hard drive has failed and will need to be replaced. If you are still in warranty HP will send a replacement. If not a retail laptop SATA hard drive can be used. Just be sure to get one of at least equal capacity as the original in order to use Recovery Discs. It can be larger, but not smaller capacity.For instance if you have a 500GB hdd you could use a 750GB hdd but not a 320GB hdd.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Similar Messages

How to use my recovery to re instill my sys?

hi
Dear ,
appreciate your efforts to help me as I faced some problem with my PC and as I dont have enough time to go to the Tochicha TS in our region and I asked our Company IT that I worked for to instill another Operation till I can go to the TS to fix this problem but still now I dont have the time to do that and I cant use the recovery to reset my PC to the first factory set with the original operation sys. that I used .
So My Question is :how to use my recovery to re instill my sys, however I used another version in my PC ,informing :
My lap top is:Satellite L655-18T
Operating system
Genuine Windows 7 Home Basic 32-bit (pre-installed, Toshiba-HDD recovery)
and I am using Windows 7 unlimited but not activated yet as I used my Windows 7 Home Basic serial to use it as a temporary solution .
thank You in advanced .
Ahmad

hi Paolo30 ,
You mean that I burn the HDD recovery on DVD and try to recover my Lap top operator Sys. from CD?
that is what I got .. confirm me this info if You don't mind and I want You to have a look about this Pic from my recovery folder to determine If I have the source or not .
thank You in advanced
>>>http://farm6.static.flickr.com/5094/5510804010_e908cd03c3_b.jpg
> > >

I HAVE FORMATTED MY LAP TOP WITHOUT UNINSTALLING itunes, HOW WILL I DO TO RECOVER MY songs?

I HAVE FORMATTED MY LAP TOP WITHOUT UNINSTALLING itunes, HOW WILL I DO TO RECOVER MY songs?

hi Guyfairhurst,
The Post doesn't share the details of what version of elements you are looking for but still mentioned below link should help you with the download.
Other downloads
For the serial number, Did you register it? If yes, please log on to Adobe.com and under your products, it should be available for you.
Cheers,
Kartikay Sharma

I have pressed a one step-recovery button on my lap-top and have lost all i-tunes data. However, a record of all my purchases still remain on my account. I do not have it saved to anyother device, how can i recover lost i-tunes music already purchased?

i have pressed a one step-recovery button on my lap-top and have lost all i-tunes data. However, a record of all my purchases still remain on my account. I do not have it saved to anyother device, how can i recover lost i-tunes music already purchased?

You can re download past purchases using the same Apple ID for free > Downloading past purchases from the App Store, iBookstore, and iTunes Store

HT201272 Hi, I need to recover some songs past purchased in my lap top computer, Is there specific procedure to do that?

Hi, your help on this, I need to recover songs past purchased that were downloaded into my Laptop, Is there some procedure to recover it, My previous laptop were damage.

From the OP: "My old computer got a virus and when that happened all my music was lost. "
They don't have the music on their computer so they cannot transfer the iTunes folder, from the computer to their iPod and then to the new computer. And if they try to enable disk use on the iPod it will erase all the music that is on it. The method you cited is moving the files in a data format using the iPod as a flash drive. It doesn't work if they are in music format. That is why I suggested Yamipod.

I forget my hp lap password . and i am using ubuntu free software.how can i recover the problem

hp notebook pro 445

"If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present." http://support.apple.com/kb/HT1212
See this for restore instructions: http://support.apple.com/kb/HT1414

How can i recover my old browser with all my bookmarks and its toolbar

My laptop was running perfectly well till yesterday. today when i opened my laptop there was a HP update required massage window I pressed O.K as always. After a while when update was completed it has put a funny wall paper on my lap top, and worse, my internet browser has been removed. I changed my browser back to Mozilla Firefox, but now I lost all my bookmarks and its toolbar.
I also lost all my user I.Ds and password linked to these I.Ds. Now how can I recover this information? I did ran system recovery couple of time from last months dates but I still unable to get the setting of my orignal browser.

Hello downtownbrown,
You want to restore your files after a refresh.
Once you have run a refresh on your PC everything that was not preinstalled on the system is deleted.
The only way to get the information back on your PC is to have a backup of everything on an external drive.

Is there a way to recover hard drive data after backing up via Time Machine (from Time Capsule)?

iMac 27", Mid 2011
2.7GHz Intel Core i5
Mac OS X Lion 10.7.5 (11G63b)
Apple Time Capsule (May 2012)
Greetings,
Is there a way to recover the most recent version of your hard drive, after you installed an earlier version. I accidentally restored to an earlier version of my Mac Book lap top and installed it on my iMac desk top. I installed the earlier version using an Apple Time Machine and Apple Time Capsule.
I see some recovery software online, but I'm not sure if I should buy one or if there's another way to approach this problem.
The restored version has some of my files, but it's 2 full years old!
Am I dead in the water?
I appreciate any advice you can offer on alternative recovery techniques or recovery software recommendations.
Sincerely,
Chuck "dying over here" B.

Hey R,
Thanks for the quick reply.
Unfortunately the whole time I thought the TM/TC was backing up correctly as the thing was starting and stopping as if everything was fine. I guess I was blinded by the little green light that was always on. So actually it does not have a recent version of my iMac, - it only lists old 2011 and 2012 versions of my Macbook. I suppose I screwed something up at setup, and as it was hard lined (via a T5 cable) into my iMac, and the Macbook was shut down in a drawer, I never realized the error.
The restored version is less than a Gig, so there's plenty of room left on the iMac (1TB HD). As such, I'm hoping that most of the files have not really been overwritten.
I'm willing to pay to have it professionally recovered, but is that even possible?
C

I am installing itunes to a laptop and have not sync device to this lap. It is saying that it must first restore device. The problem is I have over 2000 pictures and don't want to lose them. Now my phone is in restore mode and I don't know what to do. I

I am installing itunes to a laptop and have not sync device to this lap. It is saying that it must first restore device. The problem is I have over 2000 pictures and don't want to lose them. Now my phone is in restore mode and I don't know what to do. I don't want to proceed and loose these very important photos of family. What do I do to get it out of restore mode? My phone will not allow me to do anything to it at this point. I have the itunes downloaded on the laptop now. When I push the button for the phone it just shows Itunes and plug. I can't even call or open phone up.

Unfortunately... Once the Device is asking to be Restored with iTunes... it is too late to save anything...
See Here > http://support.apple.com/kb/HT1808
However... Once you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766
Jessica Sanchez wrote:
I am installing itunes to a laptop and have not sync device to this lap. ...
Using a computer, other than the one you have regularily been Syncing and Backing up to, was the begining of your issue.

Recovering from Old Shadow Copy Cache System Files

Hello,
We have a client who had data corruption on a large scale (virus) and did not have an active backup. Shadow Copy was enabled, but failed when attempting to restore using built-in Shadow Copy recovery. Folder and File level recovery failed.
We were able to use a tool called Z-VSSCopy to restore file-by-file, but as that was underway (days) the shadow copy service continued to run and eventually ran out of space, overwriting the shadow copies we were restoring from.
I know, I should have modified the schedule or at least increased the available size for shadow copies, but that is a lesson learned too late.
In viewing the shadow copy data in the \System File Information folder, I saw that the copies were in fact deleted, but I noticed two files that were from a month ago.
Z-VSSCopy and built-in are not recognizing them (or vssadmin) but I can see the data is still there. One is 300+ MB and the other 100+ MB.
Is there a way I can force recovery using data contained in these files, or are they lost?
I'm currently running a Data Recovery program in hopes I can recovery anything, but since there has been significant writing on this disk since the incidence, I have little hope.
Any help is GREATLY appreciated. Thanks.

Hi,
Generally if a previous version is not recognized by system, we may not able to recover the data inside.
If you can still see some VSS files, please test if they could be recognized by command line:
vss list shadows
If one of them could be recognized, it will be listed like this:
vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool
(C) Copyright 2001-2013 Microsoft Corp.
Contents of shadow copy set ID: {3020fef8-e11b-4b45-b26f-8fec24a2bd27}
Contained 1 shadow copies at creation time: 2013/10/28 21:09:33
Shadow Copy ID: {b340c998-6ae5-459a-8e15-7a81188242c7}
Original Volume: (G:)\\?\Volume{d35a24f1-3f7a-11e3-be86-f01faf2a379a}\
Shadow Copy Volume: \\?\GLOBALROOT\Device\HarddiskVolumeShadowCopy3
Originating Machine: LAP-SHAN.fareast.corp.microsoft.com
Service Machine: LAP-SHAN.fareast.corp.microsoft.com
Provider: 'Microsoft Software Shadow Copy provider 1.0'
Type: DataVolumeRollback
Attributes: Persistent, No auto release, No writers, Differential
Please check the timestamp to make sure it is the snapshot you are looking for.
If it is listed, try to create a symbolic link:
mklink /d c:\shadow123 \\?\GLOBALROOT\Device\HarddiskVolumeShadowCopy3\
*Note:add a back-slash in the end of this command line.
If this will work, you can access c:\shadow123 to get the files.
If you have any feedback on our support, please send to [email protected]

Frequent stalling and Run Recover messages.

Solaris 9 x86 db-4.2.52.NC-sol9-intel-local
Using named+DLZ in "read only" mode, and local perl script that adds and removes IPs. Very frequently, currently about once a day, the DB will hang (named truss indicates db lock waits perhaps). I can shut everything down, and run recover a few times, and it generally comes back. But it can be somewhat annoying when it happens at 3 am.
Would it possibly help to upgrade to "db-4.6.21.NC" ? After compiling, but not installing, the 4.6.21.NC's db_stat reports "Invalid argument" which makes me suspect I would have to migrate the db first.
I guess I am hoping that either I open it wrong in my script and hence bleed locks or similar. Or, that upgrading to latest version might fix it as there are bugs fixed in that area.
DLZ opens the db with:
if ((result = (*db)->open(*db, NULL, db_file, db_name, db_type, DB_RDONLY | bdbhpt_threads, 0)) != 0) {
My perl script uses:
$env = new BerkeleyDB::Env
-Home => $dbenvpath,
-Flags => DB_INIT_CDB|DB_INIT_MPOOL|DB_CREATE,
-ErrFile => "error.txt",
-Verbose => 1 ;
$dns_data = tie my %cacheDnsData, 'BerkeleyDB::Hash',
-Env => $env,
-Filename => "$dbenvpath/$dbfilename",
-Flags => DB_CREATE,
-Property => DB_DUP | DB_DUPSORT,
-Subname => "dns_data",
or die "Cannot create master.dns_data.db: $BerkeleyDB::Error\n";
tie my %cacheDnsZone, 'BerkeleyDB::Btree',
-Env => $env,
-Filename => "$dbenvpath/$dbfilename",
-Flags => DB_CREATE,
-Subname => "dns_zone",
or die "Cannot create master.dns_zone.db: $BerkeleyDB::Error\n";
Various statistics about the DB (when it is working):
/usr/local/BerkeleyDB.4.2/bin/db_stat -c -h /etc/ns2/
114 Last allocated locker ID.
2147M Current maximum unused locker ID.
5 Number of lock modes.
1000 Maximum number of locks possible.
1000 Maximum number of lockers possible.
1000 Maximum number of lock objects possible.
8 Number of current locks.
19 Maximum number of locks at any one time.
14 Number of current lockers.
22 Maximum number of lockers at any one time.
5 Number of current lock objects.
7 Maximum number of lock objects at any one time.
13M Total number of locks requested.
13M Total number of locks released.
0 Total number of lock requests failing because DB_LOCK_NOWAIT was set.
6 Total number of locks not immediately available due to conflicts.
0 Number of deadlocks.
0 Lock timeout value.
0 Number of locks that have timed out.
0 Transaction timeout value.
0 Number of transactions that have timed out.
400KB The size of the lock region..
137 The number of region locks granted after waiting.
26M The number of region locks granted without waiting.
/usr/local/BerkeleyDB.4.2/bin/db_stat -d /etc/ns/DLZ.dnsdata.db -s dns_data -h /etc/ns2/61561 Hash magic number.8 Hash version number.
Flags: duplicates, multiple-databases, little-endian
8192 Underlying database page size.
0 Specified fill factor.
21M Number of keys in the database.
42M Number of data items in the database.
790653 Number of hash buckets.
2742M Number of bytes free on bucket pages (58% ff).
0 Number of overflow pages.
0 Number of bytes free in overflow pages (0% ff).
46746 Number of bucket overflow pages.
346M Number of bytes free in bucket overflow pages (10% ff).
3413 Number of duplicate pages.
27M Number of bytes free in duplicate pages (2% ff).
0 Number of pages on the free list.
/usr/local/BerkeleyDB.4.2/bin/db_stat -m -h /etc/ns2/
261KB 912B Total cache size.
1 Number of caches.
264KB Pool individual cache size.
0 Requested pages mapped into the process' address space.
14M Requested pages found in the cache (80%).
3823107 Requested pages not found in the cache.
0 Pages created in the cache.
3823136 Pages read into the cache.
18 Pages written from the cache to the backing file.
3823108 Clean pages forced from the cache.
0 Dirty pages forced from the cache.
0 Dirty pages written by trickle-sync thread.
32 Current total page count.
32 Current clean page count.
0 Current dirty page count.
37 Number of hash buckets used for page location.
22M Total number of times hash chains searched for a page.
9 The longest hash chain searched for a page.
29M Total number of hash buckets examined for page location.
49M The number of hash bucket locks granted without waiting.
51 The number of hash bucket locks granted after waiting.
27 The maximum number of times any hash bucket lock was waited for.
11M The number of region locks granted without waiting.
10 The number of region locks granted after waiting.
3823258 The number of page allocations.
8087530 The number of hash buckets examined during allocations
7 The max number of hash buckets examined for an allocation
3823109 The number of pages examined during allocations
1 The max number of pages examined for an allocation
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Pool File: /etc/ns2/DLZ.dnsdata.db
8192 Page size.
0 Requested pages mapped into the process' address space.
14M Requested pages found in the cache (80%).
3823107 Requested pages not found in the cache.
0 Pages created in the cache.
3823136 Pages read into the cache.
18 Pages written from the cache to the backing file.

Thank you for your replies.
I have changed to Transactional, both in the C program (named) and the perl script. I also finally got around to (called too many times at 3am) upgrading BerkeleyDB, so now we are running db-4.6.21.NC.
I have made an automated crontab script that runs every minute, if named do not respond, kill it, kill any perl scripts, and run recover. On an average day, it has to recover some 12-20 times a day.
What I have not quite figured out is, why this situation can occur:
Fri Nov 9 04:02:01 2007 add spammer 65.24.181.238 (cpe-65
-24-181-238.columbus.res.rr.com)
Fri Nov 9 04:07:05 2007 : add spammer 90.193.255.64 (5ac1ff4
0.bb.sky.com)
Fri Nov 09 04:12:00 2007 : FIXING CORRUPT RBL BDB
Fri Nov 9 04:36:14 2007 : add spammer 83.237.203.50 (ppp83-
237-203-50.pppoe.mtu-net.ru)
"named" runs all the time, but definitely opens the DB in read-only. The only other process that runs is the perl script. It added a record at 04:07. Since crontab runs every minute, everything was ok at :08 :09 :10 :11 but at 04:12 it was corrupt. Also notice that in this case, there was no over-lap. Just one writer, and one reader.
Anyway, I can add a test for the DB_LOCK_DEADLOCK error code, but since the "correct action is to close any cursors and abort" and my code only uses cursor with c_get (check for existence of data, or rather, get the second record under same key). All execution of the script is to do one transaction and quit. The "clean" part is not in use yet.
The entire perl script is available here:
http://www.lundman.net/ftp/rbl_add_ip.pl
I could try to upgrade to latest named, but since it opens the DB with READONLY I have assumed the problem must lie with my perl script. Since I recently changed from concurrent to transactional, I do not have any txn_begin() calls, I assume I will have to add them. The examples use db->put, but I assume it will be ok with the perl way of
$cacheDnsData{"$rbldomain $revIP"} ="$serial $revIP $ttl A 127.0.0.$code";
Or is it advisable to drop the db-tie, and use db->func style calls?
Lund

Got a new lap top my husband wanted to help me by downloading itunes on it I have not used icloud but do have it on my phone When he pugged it in it asked if he wanted to backup he said yes Then reset my phone now all my pictures are gone please help

I got a new lap top and my husband thought it would be a good idea to help me by downloading itunes on it. Well Not so much... I have not used icloud but do have it on my phone and other items. When he pugged my phone in to my laptop it asked if he wanted to backup he said yes. Then it reset my phone and now all my pictures are gone please help

If your phone was backed up to your computer, the backup would contain your camera roll photos (and videos). Restoring to this backup would recover them. However, if it was backed up a second time after losing them, this would overwrite the backup containing the data and your photos would be lost.
You can try restoring to your backup, but before doing so go to iTunes>Preferences>Devices and check "Prevent...from syncing automatically". This will prevent the phone from automatically syncing and backing up when you connect it to your computer, thereby overwriting the backup you want to restore to. After doing this, open iTunes on your computer and connect your phone, then right-click on the name of your phone on the left side of iTunes and choose Restore from Backup. (If you have iTunes 11 first go to View>Show Sidebar.)
Again this might work, as long as the phone was only backed up and then not subsequently backed up again after the photos were lost.

Why won't my purchased music download into itunes on my phone or lap top?

I downloaded several songs from different albums and they won't show up in my itunes on my phone or on my lap top. It won't let me attempt to redownload the songs because when I look on iTunes it says purchased. Also, when I go to Quick Links on in the iTunes store and clicked on purchased, both on and not on the device, only one of the songs was recovered. I know that these songs are purchased because I received my iTunes recepit, and it also says it in the iTunes store, but I cannot play them anywhere. How can I fix this? I feel like I have tried everything I could find.

I have the exact same problem. I downloaded some TV shows this morning with no problem. By noon, I continually get the "connection timed out" message when I try to download some more. I have tried everything I have found on the discussion board so far, rebooted my computer, rebooted my internet router, turned off firewall (also McAfee), verified iTunes is an application allowed full access in my security software, flushed my dns cache, etc. I have 27 downloads waiting.
Apple support was absolutely no help. I emailed them with a full description of the problem including the error code number and I got back an email saying "The iTunes Store is unable to provide technical support".

HT4759 I hooked up my I phone to my lap top and all my notes from my phone are gone and I can't find them anywhere on my lap top or in I Cloud Help

I hooked my phone up to my lap top and in sync, but all my notes from my I Phone are not there anymore and I can not find them any where on my lap top or in I cloud and I need the notes back on my phone...... Help. I don't know what to do.

If you have deleted notes from the iCloud account, you can't recover them, unless you also had them on your computer and maintained a back up.

How do you recover previous versions of a excel document, please?

how do you recover previous versions of a excel document, please?

Hi kappy,
I have have gone to Home/Library/Applications Support/Microsoft/but then it doesn't show office for some reason even though it is installed on my lap top? I'm panicking as its all my businesses accounts

Recover my lap

Similar Messages

Maybe you are looking for