Recovery Manager doesn't work :(!!!

I have installed a new windows to my laptop (dv6-6177se) but it doesn't work as well as the original OS and when i tried to recover the original copy from the hard drive it didn't work! I installed HP recovery manager but when i try to open it there is a massage pops up tellin' me that there's missing fill called DZIP32.dll and HardDisk.dll for X64 i dunno what to do so plz help me to solve this problem.

Here are the specs for your HP Pavilion dv6-6177se Entertainment Notebook Computer. According to the specs, this model came from the factory with Microsoft Windows 7 Home Premium 64-bit installed. From HP webpage "Windows 8 Upgrade Information";
==============================================================
Windows 8 Upgrade:
Important Upgrade Information
Please read the following important information before beginning your upgrade:
•Not all Windows 8 features may be available on all PCs.*
•Your particular experience with Windows 8 will be determined by the capabilities of your PC.
•HP is providing upgrade instructions and drivers will be available for most Windows 7 systems sold after 1st October 2011.
•If you want to restore the original operating system after upgrading, you must create HP recovery media before you upgrade.
•Please note that if you purchased your system prior to October 1, 2011, HP has not tested these PCs or developed Windows 8 upgrade instructions or drivers for them. Upgrading such systems may be difficult or impossible.
==============================================================
If you created your HP Recovery Discs before upgrading your computer, please use them to return your computer to a factory like state. If you didn't create your HP Recovery Discs, you will need to order a set of discs from HP or their authorized vendor in your region.
Please send KUDOs
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Similar Messages

Application Restart and Recovery APIs doesn't work for windows services

I am using the Application Restart and Recovery mechanism (provided in Windows API Code Pack for Microsoft.NET Framework) to collect some information (i.e. stack information when there's an unhandledexception) before my windows service crash down.
It works well for windows form applications, but the callback method wouldn't be called if the host is a windows service.
I have checked the article: https://msdn.microsoft.com/zh-cn/subscriptions/downloads/cc303708
But it doesn't specify clearly whether it works for a windows service. It seems that the recovery will only be activated when the user interacts with the error dialog of Windows Error Reporting (clicking "close" on the dialog, for example).
So I am wondering is my guess right that the Application Restart and Recovery mechanism doesn't work for windows services. Or is there a better way to meet my requirement?

I would suggest trying ARR if that's what you want to use. The restart portion won't work, but it doesn't need to as if you fail out of your service, the Windows service controller will handle recovery (up to and including restarting your service).
You configure those recovery actions either through code or one of the built in administrative tools for services such as services.msc.
DebugDiag/ADplus and similar tools ultimately do use built-in APIs; you don't need to add anything external to collect debugging information. You do however have to write a good deal of code to do somethings. It's pretty simple to use the unmanaged
function that I pointed out before and
MiniDumpWriteDump to write a minidump when you hit an unexpected error(the dbghelp.dll that comes installed with Windows has it so you don't need anything additional installed). You can even write a basic debugger that literally debugs a process using
only kernel32 functions (see
https://msdn.microsoft.com/en-us/library/windows/desktop/ms679301(v=vs.85).aspx if you're interested).
WinSDK Support Team Blog: http://blogs.msdn.com/b/winsdk/

Since the last update yesterday to firefox 4.0.1 my program "asus security protect manager" doesn't work properly. That means, that the saved keys from several websites not remembered for lock in.

since the last update yesterday to firefox 4.0.1 my program “asus security protect manager” doesn’t work properly. That means, that the saved keys from several websites not remembered for lock in.

Sorry you are having problems. First of all try Fifrefox's safemode.
*[[Troubleshoot Firefox issues using Safe Mode]]
If that works post back for further advice.
Next step, if safe mode did not work.
First: Try a clean install, (you have had a none standard version installed previously) that involves deleting the program files. Then if necessary try troubleshooting by creating and using a clean empty Firefox profile.
See
* this recent post [/questions/940399#answer-377134]
* http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall
Second: try a New Profile
*http://kb.mozillazine.org/Profile_Manager#Creating_a_new_profile
* this will be an additional profile, it is still worth backing up any existing or currently working profile on a regular basis
**[[Back up and restore information in Firefox profiles]]
* Until you are absolutely confident about the repercussions I suggest
** always use an empty folder when creating a new profile
** never delete or rename profiles, just disable or remove shortcuts
** after creating a new test profile open it and check for any addons or plugins that may be have been included by default

Hi there.. neeed some help.. where can i recover my os bcoz my recovery manager is not working.

hi there.. need some help here.. is there anyway that i can download the os of my hp pavilion dv6? bcoz my recovery manager is not working.. displaying that i updated my software or hardware that's why its not running (the recovery manager) i already download a new recovery manager but same display error.. also tried restoring my system and reinstaling all my hp driver and software.. what happen is i uninstall a program ":safesurf" then suddenly i cant access on the internet anymore.. my connection is conected to internet but the browser canot display the site that i want to check (IE, Google and Mozilla) already check all the setting of the browser but still cannot display the site. please help.. thanks..

Hi,
dv6 is a series of many models, what is yours ? What is its OS ? To help us answer question quicker, please read this:
http://h30434.www3.hp.com/t5/First-Time-Here-Learn-How-to/Welcome-Get-started-here/td-p/699035
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Media Manager doesn't work anymore

When I'm capturing and logging footage, Media Manager is part of my work flow. I capture the entire tape, then use the DV Start/Stop detect function to make subclips. Then I use Media Manager to create smaller versions of the subclips. I I log and archive the newly created compressed clips, and use them for edits.
But now with FCP 5.0.2, Media Manager doesn't work like it used to. The end result of outputting the subclips is one large clip. If I output half of them at a clip (1,3,5,7,9,etc.) and then go back and do the rest (2,4,6,8,10,...) it works. But what a pain. I've tried every variation of settings. Nothing make a difference.
What gives?
Also, the subclips all now have the first frame of the next clip stuck on the end. That's not Media Manager, it happens before. But it is not cool.
Anyone having similar problems, and any solutions?
-Daniel Cohen

Tom,
Here is the process:
Capture the entire DV tape as one long clip.
Use DV Start/Stop detection to create markers. (This results in that extra last frame from the beginning of the next clip.)
Make subclips from the markers.
Select subclips and go to Media Manager
Use Media Manager to Recompress
-Recompress media using OfflineRT NTSC (Photo JPEG)
-Delete unused media from selected clips.
-No handles (I want the clip as it was on the tape)
-Base media file names on clip names
-Select a media destination
And off it goes.
Instead of creating individual clips (at the slected location) it makes one long clip, like the source just smaller because it is now compressed.
In earlier version of FCP this worked. Something has changed in version 5.
I can trick the Media Manager by selecting every other subclip, outputting, and then going back and selecting the rest. But that is twice the work. And I still have those darn extra frames at the end of the clips.
Any ideas. (I have already done the Quicktime repair listed in many other threads.)
-Daniel Cohen

Media Manager doesn't work

I have a Blackberry 8330 (CDMA) v4.50.191 (Plaform 3.4.0.62).
The Blackberry desktop manager is v4.5
The Media Manager doesn't work.
when I click on the icon for it, the window gets a grayish tint -- like it's going to do something -- but then it returns to normal and nothing happens.
I am trying to download photos I took with my Blackberry camera to my computer.
Can anyone tell me some recommendations on how to download them and/or repair the Media Manager?
Thanks,
Sharlene

Hello,
My advice, skip the Media Manager and instead use Mass Storage Mode:
KB11879 What is mass storage mode
With that, you can work with your BB memory area(s) as USB drives on your computer, and use your normal computer interface to do so.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Recovery partition and Recovery disk doesn't work

I have HP Pavilion dv6000 Windows Vista Home Premium with Recovery Partition at drive D:\. Here is my problem. I want to use the System Recovery to put my PC to its default setting, I have use Recovery Manager, but System Recovery does not work. I have also use a recovery disk, but nothing works. Using the Recovery disk, while the recovery is in process formatting the windows partition, and the process reaches 33%, a windows error pop-out (Error: ox4001100200001005). I need help because my laptop is unstable and I cannot work.
Yours truely,
colorlime

Enter BIOS setup by tapping/holding the F10 key immediately after powering on the laptop.Use Diagnostics to test your hdd.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Recovery Manager has stopped working

Hi,
when trying to run the HP Recovery Manager on a HP Pavilion DV6-3180ea notebook, the error "Recover Manager has stopped working" occurs.
Any ideas? Should I try reinstalling Recovery Manager?

Restart the PC and start continuously tapping F11 when you see the HP logo, this will start Recovery manager from the bios, see if it works using this method.

Changing adobe ID - Adobe Cloud Manager doesn't work

Hi guys!
I have on my mac Adobe Creative Cloud Manager with all the app installed in English. All work.
I changed my ID with new subscription of all the CC product, but the Manager doesn't recognize what i have installed, so when i try to update, install or uninstall the apps, i can't.
I already try with CC cleaner, but doesn't work...
I already also delete the OOBE folder...
Anyone can help me?

Please refer : http://helpx.adobe.com/creative-suite/kb/troubleshoot-update-issues-cs5-cs5.html#main_Trou bleshoot_Adobe_Application_Manager_problems_or_failures

Satellite L650-12Q - Windows 7 recovery procedure doesn't work

Hello,
I have Windows 7 Home Premium edition (64 Bit) in my Toshiba Satellite laptop (L650-12Q) and after a fresh start the Windows stopped working. I have a recovery disk which didn't load (I ended up with the pointer in a blank screen) and the windows 7 installation disk wouldn't work either (same thing). Safe mode doesn't work either.
This probably means that the partition has a problem am I right? - I have used Ubuntu Live CD which confirmed that c:\ cannot be mounted although d:\ can.
The problem however, is two fold: a) I'm not sure whether aspects of my data are accessible or not (I can't check this) and b) I can't re-install Windows, as the Windows 7 installation process doesn't work.
Any ideas please on what to do next? I would like to access the partition, have searched the internet (even tried with a Windows 98/XP boot disc) but didn't have any luck as the partition is written in a newer way, which isn't detected by them...
Thank you in advance.

> I have a recovery disk which didn't load (I ended up with the pointer in a blank screen)...
Do you use it for the first time?
Anyway, try to start recovery disc following these steps:
-Start notebook model and when you see Toshiba welcome screen press F12 several times to enter Boot options
-when the boot menu is shown put recovery disc into optical disc drive
-in menu choose CD/DVD drive and press ENTER
ODD should start reading recovery disc.
What happen when you do this?

Win 7 64bit HP recovery CD doesn't work

Hi all,
I ordered the 64-bit Windows 7 HP recovery CD and it doesn't work.
When it separates the partitions, and it displays it's progress as usual e.g.
1/7 complete
2/7 complete
3/7 complete (files copied etc.)
but around either 3/7 or 4/7 the sound of the CD in the drive changes, and it sounds like it's constantly restarting.
I'm confident that the problem is isolated to this CD since other discs are working fine and the 32-bit recovery CD I got with the laptop reinstalled Windows fine.
I'm wondering what might be happening? I've contacted the company about it and am waiting for news. I can't see any evidence damage to the disk, and I take great care generally. All I know is it's not working. Any ideas?
Thanks

> I ordered the 64-bit Windows 7 HP recovery CD and it doesn't work.
What do you want with a HP recovery disk?
If you have an Toshiba notebook then you have to use an Toshiba Recovery disk

My Acer Recovery Management is not working. How do I get a disc of factory settings?

I've tried to do a restore point on my computer after downloading software that it didn't like. Then when that failed to work, I was going to restore the computer do default setting. There is an bug in the namescript of the Acer Recovery Manger. I tried to download the Acer Recovery Manager online and there was an error. I even tried from the Acer Recovery Manger itself but it didn't want to do that either. I don't think that I have the discs for recovery (if I do they're in a box somewhere as I'm in the middle of moving). Is there some place online that I can create recovery discs?

Have you tried ALT+F10 at boot? by the way, if you want the original installation media:Acer recovery media
if you are in the US you can buy it:
http://store.acer.com/store/aceramer/en_US/eRecovery
if you are outside the US, you must call/email your regional Acer support service:
http://www.acer.com/worldwide/support/

Password Manager Doesn't Work With Following Sites:

Hello,
I'm having much trouble with the following sites in terms of getting password manager to rememeber the passwords. When I log in, pass Manager doesn't prompt me to remember information.
Hotmail
Hushmail
Facebook
Other Financial Sites
Is there a way I can manual add info? Other solutions? Thanks!

Hello, I'm sitll having the same issue. i have noticed that this is only an issue with Firefox. IE7 works fine with manager on all websites.
Please, if developers are reading this, fix the bugs in Password manager and allow it to intgrate with Firefox better! thanks!

Package Manager doesn't work

I have Solaris 11 running under Virtual Box on OS X. When I try to use the Package Manager, I enter my administrator password...and absolutely nothing happens. Same thing with the Update Manager.
Any idea why it doesn't work?

but after installing one wire from the VI Package Manager I found nothing new thing in arduino (figure below) I checked : low level, sensors, utility, examples. and I searched on the internet the driver of one wire (DS18B20) to Arduino and i found nothing.
Attachments:
arduino (one wire).png ‏43 KB

Layout Manager doesn't work

Hello !
After few days, I can't solve this problem, please help me before I will become completely insane !!!
I have a JInternalFrame which contain a panel (the contentpane). I add a JTabbedPane to this contentpane. This tabbedpane consists of 2 panel in 2 tab. I would like to add some components for each panel with a GridBagLayout manager but it doesn't work. Components are displayed at center of panel on 1 row although each of them have a specific gridx and gridy...
See below :
public class WFParamsFrame extends JInternalFrame{
 private javax.swing.JPanel jContentPane = null;
 private javax.swing.JPanel jGeneralPanel = null;
 private ResourceBundle messages;
 private aMain app;
 private StaticParamsFrame staticDataFrame;
 private int indexWF;
 private javax.swing.JTabbedPane jTabbedPane = null;
 private javax.swing.JLabel jLabel = null;
 private javax.swing.JTextField jTextField = null;
 private javax.swing.JLabel jLabel1 = null;
 private javax.swing.JTextField jTextField1 = null;
public WFParamsFrame(aMain a, StaticParamsFrame sdFrame, int _index, boolean bool) {
super();
app=a;
staticDataFrame = sdFrame;
indexWF = _index;
messages=app.getMessages();
initialize();
private void initialize() {
this.setSize(670, 385);
this.setContentPane(getJContentPane());
this.setTitle(messages.getString("AWFParF_TitleShowParams"));
this.jTabbedPane.setTitleAt(0, messages.getString("AWFParF_TitleGeneralTab"));
this.setClosable(true);
this.setVisible(true);
this.setIconifiable(true);
this.addInternalFrameListener(new javax.swing.event.InternalFrameAdapter() {
 public void internalFrameClosing(javax.swing.event.InternalFrameEvent e) {
 frameClose();
private javax.swing.JPanel getJContentPane() {
if (jContentPane == null) {
 jContentPane = new javax.swing.JPanel();
 jContentPane.setLayout(new java.awt.BorderLayout() );
 jContentPane.add(getJTabbedPane(),java.awt.BorderLayout.CENTER);
return jContentPane;
private javax.swing.JTabbedPane getJTabbedPane() {
if(jTabbedPane == null) {
 jTabbedPane = new javax.swing.JTabbedPane();
 jTabbedPane.addTab(null, null, getGeneralPanel(), null);
 jTabbedPane.setMnemonicAt(0, KeyEvent.VK_G);
return jTabbedPane;
private javax.swing.JPanel getGeneralPanel() {
if(jGeneralPanel == null) {
 jGeneralPanel = new javax.swing.JPanel(new java.awt.GridBagLayout());
 addComponent(jGeneralPanel, getJLabel(), 0, 0, 1, 1, 1, 1);
 addComponent(jGeneralPanel, getJTextField(), 1, 0, 1, 1, 1, 1);
 addComponent(jGeneralPanel, getJLabel1(), 2, 0, 1, 1, 1, 1);
 addComponent(jGeneralPanel, getJTextField1(), 3, 0, 1, 1, 1, 1);
 addComponent(jGeneralPanel, getJLabel2(), 2, 1, 1, 1, 1, 1);
 addComponent(jGeneralPanel, getJComboBox2(), 1, 1, 1, 1, 1, 1);
 addComponent(jGeneralPanel, getJLabel3(), 2, 1, 1, 1, 1, 1);
 addComponent(jGeneralPanel, getJTextField3(), 3, 1, 1, 1, 1, 1);
 jGeneralPanel.setSize(700, 350);
 jGeneralPanel.setPreferredSize(new java.awt.Dimension(700,350));
return jGeneralPanel;
private void addComponent(JPanel p, java.awt.Component component,
 int row, int column, int width, int height,
 int weighty, int weightx) {
GridBagConstraints c = new GridBagConstraints();
c.gridx= column;
c.gridy=row;
c.gridwidth=width;
c.gridheight=height;
c.anchor=GridBagConstraints.NORTHWEST;
c.weighty = weighty;
c.weightx= weightx;
p.add(component, c);
}

GridBagLayout is something I avoid at all costs. Use BoxLayout and javax.swing.Box.I've asked this before and I'm still waiting for a counterexample: I claim
their are plenty of reasonable GUIs where GBL is the obvious answer. Take the challenge...
Perhaps you could help an old man out and recreate the following simple GUI, sans GridBagLayout.
import java.awt.*;
import javax.swing.*;
public class GridBagExample {
 public static void main(String[] args) {
 UIManager.put("TextField.margin", new Insets(3,5,3,5));
 String[] labelText = {"field 1:", "field 2:", "a text area:", "last field:"};
 JPanel p = new JPanel(new GridBagLayout());
 p.setBorder(BorderFactory.createEmptyBorder(5,5,5,5));
 GridBagConstraints gbc = new GridBagConstraints();
 //labels:
 gbc.gridx = 0;
 gbc.anchor = GridBagConstraints.FIRST_LINE_END;
 gbc.insets = new Insets(2,2,2,2);
 for(int i=0; i<labelText.length; ++i)
 p.add(new JLabel(labelText), gbc);
//text:
gbc.gridx = 1;
gbc.fill = GridBagConstraints.HORIZONTAL;
for(int i=0; i<labelText.length; ++i)
p.add(i==2? new JScrollPane(new JTextArea(5, 20)): new JTextField(20), gbc);
//display p:
JFrame f = new JFrame("GridBagExample");
f.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
f.setContentPane(p);
f.pack();
f.setResizable(false);
f.setLocationRelativeTo(null);
f.setVisible(true);

Recovery Manager doesn't work :(!!!

Similar Messages

Maybe you are looking for