Red shading behind text

I have G71 laptop 17" that is only 4 months old.  I am seeing very light red shading behind each letter in my text.  It appears wether i am on the web or in my email.  Would this be a video card issue?

Actually a backlight issue is more likely but video card is not impossible. The way to tell is to hook it to an external monitor. If it still shows the red on an external monitor it is the video card. If the external is OK it is the backlight/display panel. Either way, HP should fix it under warranty.

Similar Messages

  • Is there a way to create a heading with shading behind the text and thin lines above and below?

    I'm working with InDesign CS6, Windows 7.
    Is there a way, using paragraph rules, to create a heading with shading behind the text and thin lines above and below the text?
    I'd like to create headings that look like these:
    Thank you!

    I have a document where I almost do such, but without the fill. I use a Head Style which Spans Columns for this instance; it allows the haeds to flow and fill the width.
    Paragraph Rules above and below are turned on with plenty of offset.
    I tweaked my setting to accomodate your need - It required only one instance, not above and below, and changing the stroke to a double stroke. 
    It may be necessary to create a custom stroke to modify the proportion of stroke vs fill. There is a difference of thin-thin and  thick-thick, neither of which seemed perfect but might be dependent on the Character height.
    Creating custom strokes is accomplished via the Strokes Panel.

  • Images Behind Text in RTF Template

    While creating a few rtf templates, I noticed that if an image is to be shown behind text then the image will not render to back to .rtf by bi pub.
    If I put the image inline with text, it renders just fine.
    Am I missing a step that would allow me to render the image behind text or is it just working as intended?
    Oracle BI Publisher 10.1.3.4.1
    Thank you.
    Edited by: Crawler409 on Dec 17, 2010 2:49 PM
    Edited by: Crawler409 on Dec 17, 2010 2:50 PM

    Hi
    Can you pl. send me the RTF template and sample XML. I will try to fix the template.
    Thx
    chundi ([email protected])

  • Anchored objects behind text

    Is there a way to make an anchored box sit behind text? I have a section title with section numbers. I would like to place a piece of art behind all the section numbers. The box always comes out on top. I can create a new paragraph style with autonumbering for the section into it, place it over the art, group it, and then anchor it. The only problem is, now the section numbers won't show up in the running head. Any ideas? I'm using CS3. I used to be able to do this in FrameMaker. Thanks.

    Can't be done with anchored objects - sorry.
    But you can convert your text to a table - and that can put a background in there.
    OR
    Use Paragraph Rules to highlight a line of text or a pargraph of text
    http://www.theindesigner.com/blog/episode-49-paragraph-rules-rule

  • Selecting Graphics Behind Text

    Hello,
    I’m using Pages ’08 and working with a neat, layered, grouped graphic. There are three layers: a dark background graphic, a lighter middle graphic, and white text in a text box on top. All three use the exact same dimensions and are stacked one on top of the other for a total of three layers, grouped. None of the layers cause wrap.
    I’d like to select one of the graphics to edit the color and find that I cannot do it without ungrouping the items, moving the text layer out of the way, applying the new color, putting the text layer back in place, and then regrouping everything. It seems like unnecessary steps. It seems as if I should be able to use a modifier key and do a series of clicks to activate the layer that I want, much like when I used QuarkXPress and InDesign. Is there a similar key stroke in Pages?
    The user’s manual says “To select a floating object that’s behind text, place the pointer outside the text area, press the Command key, and then drag across the page until the object’s selection handles appear.” That doesn’t solve my concern, though.
    I've attached a sample of what my graphic looks like. It would be great if there were key strokes to use. If not I'll have to go back to each instance of the graphic and make changes to each one.
    Please let me know if you have an idea of how to make this work.
    Thanks,
    Scott

    Pages does not have any modifier keys to click down through layers like other DTP software.
    Unlocking and staggering the layers is the only way. There is an averaging command that does however let you centre them back on top of each other.
    Peter
    Greetings from sunny Broome.

  • Send object behind text

    Can you send an object behind text in the Ipad pages app so that the text is over the top of the object?

    After some researching I found it more productive to use a
    textArea component.
    One reason was the UIScrollBar is attached to it so
    dynamicallt resizing and moving is a breeze.
    I looked into the movieclip method swapDepths() to change the
    depth of movieclips and found
    it may be useful down the road.
    The main point of this thread was the dynamic UIScrollBar
    sitting on top of the area when created.
    With a dynamic textArea it positions itself acording to the
    Layer hiarcy. Add setSyles and there is
    no reason I see to use Dynamic text unless for less
    overhead???
    Thankyou kglad for you input!

  • HT3705 how i can solve format behind text troubleshoot?

    when im goin to move a picture, i go to format objects, and then select layout, then i select behind text and press ok... and this message is pop up:
    "the serve application,souce file, or item cannot be found. make sure the application is properly installed, and that it has not been deleted, moved, or removed"
    what i may do?

    Where do you go to format objects? In the menu? Where do you select layout? Nor can I find "behind text". Could you describe what you do with the wording that is in Pages?

  • Trying to insert a picture behind text in Word 2011 for Mac

    Can someone please help me? I am very fluent in Word 2010 for Windows, and this was a simple process. I was attempting to create a document in Word 2011 for Mac, like I've done many times on my pc. I wanted a picture in the background, with text on top of that. In the windows version, I would simply go to headers & footers, insert my picture, and set the word wrap to "behind text." When I closed the header/footer, I could put my text on top of the picture and by adjusting the text color and placement, I could create greeting cards, posters, flyers, whatever. Yesterday I tried to do the same with Word 2011 for Mac, and could not get rid of the white background behind my text. After attempting all the tricks I knew, I finally gave up. Can someone out there please point me in the right direction? (I tried to include a screen shot, but can't figure out how to use that little "insert image" button up there either. Sigh.)

    Since yours is a question about a feature in MS Word for Mac, I would recommend reposting your question in Microsoft's Support site for Word for Mac.  The experts there would be more conversant in that App.

  • Bring an object behind text

    Is ist possible to bring objects behind text?
    It should be possible somehow, becouse one template (Letter --> Elegant, im not quite shure if it's the same name in english) can do this!

    Thank you very much Bekins.
    Well, it's so easy if you know it

  • Cyan Highlight Behind Text in Design Pane

    Hi, Could anyone tell me why some of my pages have a cyan colored highlight behind the text in the design pane. It does not happen to all of my sites and am wondering why this particular site that is doing this, is doing his.
    File is a .asp extension, but other asp pages for other sites do not do this. Have checked code rewriting in prefs and do not see an instance where cyan is supposed to be implemented behind text. It's not in the style either and live page looks fine.
    Considered putting this thread go in App Dev forum instead but seems a general DW useablity issue as opposed to a dev issue. Please let me know if I should resubmit there.
    Using DW CS4 on 64 Bit Vista. What other details can I provide??
    thanx,
    jeff

    jeffo1477 wrote:
    Hi, Could anyone tell me why some of my pages have a cyan colored highlight behind the text in the design pane.
    The cyan highlighting indicates untranslated live data on a page that contains server-side code. Normally, it is applied only to dynamic text like this:
    If it's being applied to ordinary text, it suggests there's something unusual about your server-side code that's causing Dreamweaver to highlight the text in this way. The preference that controls the colour of the highlighting is in the Highlighting category of the Preferences panel.

  • Rays behind text?

    Hi,
    my first question is, is there an effect that comes with AE to create rays behind text? Any tutorials links?
    second question: how can I make a search limited to this After Effects forum?

    Thanks Szalam, these effects seem to be exactly what I need and I'm going to play with them right away.
    Your search link is also exactly a search capabilities that I was looking for. I can't find a link from this form page to it, how is one supposed to find it without asking around?
    Dave, thanks I'll keep in mind the effects from Trapcode if i can't do it with the built in effects.
    Regarding the search fields on the page of this forum they have never worked for me. I can't see the words "Search for an answer..." in any box. This is a screenshot of how I see this forum page with two empty search boxes. The search results show results from all kinds of forums. On the search result there is an option to limit the search to a forum but when I typed After Effects and searched for the word "Rays" it showed 0 result and the forum in the search options field is displayed as "After Effects (Japan)"

  • Display Image(which set as behind text)   based on some condition.

    hi all
    I have developed a xml report and in that rtf am displaying a static image (which is set as behin text).
    But i need to display the image based on some condition
    for example i have a field as ORG_ID
    if org_id=87 then image should display for that purpose am planning to use <?if:ORG_ID=87?> condition but where to place this condition for the image.
    kindly help me
    thanks for all in advance.

    that too not working because
    on image am displaying some other fields.
    see i think you didn't get my point.
    in my out put page am displaying item details ,quantity,and cost and customer details just like invoice copy .
    behind this data am displaying my company logo which will capture whole page size..
    if i place the image in table then fields will be automatically in table so i cant restrict image in this way.
    Kindly suggest any other way that works only for image which is behind text. i mean condition should be applicable only for image and leaving all other fileds in rtf.
    or
    help on this how to set a dynamic image as behind the text.
    Edited by: maddy on Nov 28, 2012 7:32 AM
    Edited by: maddy on Nov 28, 2012 7:35 AM

  • Captivate 5 NeoSpeech - GUI editor for VTML behind text?

    Is there a GUI editor to embed VTML “behind” text?  It seems NeoSpeech is the TTS engine of choice for English (US anyway). 
    Testing with Captivate 5, the generated audio is *almost* good enough for use as a narrator.  We have training “slides” where we voice over to enhance the experience.  We have been recording audio but keeping the same person working on this project is difficult.  I’d like to have a quality, reproducible source like TTS and the current implementation of NeoSpeech is about 95%. So, I’m thinking of planting VTML in the text but this makes the text awkward and the VTML is not for a casual user. 
    Is there a way to develop a plug-in that would allow an app to get to the text, manage the VTML behind the scenes something like OOXML is to text editors?

    I tested the "Loquendo" voices as Ashwin suggested. Mainly the British English one, Simon, as that can be somewhat compared to the US English. I think I like Paul from Neospeech better, but such a statement does not say much. Here are some more details:
    I like the British sound of Simon, I really do. But as far as the natural flow of the sentence - it is not as fluent as Paul from Neospeech. With Simon, I hear that the sentence is combined from independent units - words; sometimes there is a little break in between them (more noticeable than we would naturally do). Paul's renderings sound more like a solid sentence. Also, with Simon, I hear some unnatural intonation shifts in a middle of a word. Not to say that Paul does not have them - but not as often (and the latest Paul from Neospeech's website has very little of them).
    On the other side, I do not mean to say that I like everything from Neospeech. I do not like Kate - her intonation is sometimes very unnatural (to my ears). And while some say that the newest voice from Neospeech - Julie - is even better, I like it little less than Paul. True, Julie has a very nice delivery and some words she pronounces very clearly, but other parts she says indistinctly, causing me to wonder if she has an accent, or just lisps. Generally, I prefer male voice over the female one when it comes to computer voices, as the female voices - being in  higher frequencies, get more of the s sound. (Perhaps a de-esser could be built-in to the future version of Captivate to improve the voices :-).
      If I were to compare the English speaking voices, my list of preferences would be: 1. Paul, 2. Julie (this one is not in Captivate), 3. Simon + Kate. But remember, my ears are different than yours, so this all is just about what I like...  Martin P.

  • Getting rid of red missed call text

    Is there a way to change the display of missed calls from red to black text? I'm looking for something that would allow me to acknowledge that I see the missed call so that it can go back to normal.

    touch the missed call and then exit out of it and the red number will go away.

  • Framemaker 9 PDF exports with red boxes around text areas

    I have a doc, made in FM 7, using version 9
    When I make a PDF i get boxes around some of the text. It wasn't there during FM design.
    example
    (see red)
    Please help

    AxialInfo wrote:
    you might consider saving the FM file as MIF and then looking at the MIF using the wonderful freebie MIFBrowser, from Graham Wideman, from here:
    Wideman Adobe FrameMaker Topics
    to find the problem area do a search for the string that is in the title
    "Downblast Centrifugal
    Exhaust Ventilator
    Roof Mounted
    Belt Drive"
    although just pasting it here it looks like you might have soft carriage returns in it which will make it necessary to just search for the two-word segments.
    After you find the phrase, use the left navigation area to walk "up" the MIF file, looking for the specific structure that those words are in (is it a text box, or rather a graphic frame inside a text box, correct?) Is this an anchored frame, or is it just floating? If it's anchored, where is it anchored?
    In the MIF, see if you can identify any odd sounding properties of the text box or graphic frame. The MIF reference manual is a PDF found in the FM documentation folder.
    Also, one other possibility is that there's something funky with the red swash that goes across the page that's somehow "contaminating" the text frame. What kind of graphic type is the red swash? Could you take a copy of the FM file and remove the swash and then make a PDF, to see if that solves the red outline.
    edit: additional questions: are the swash and the text frame on the body page or on the master page? When Arnis suggested checking for graphics behind the text frame, did you also check the master page(s) as well as the body pages?
    Sheila
    I tried the program:
    <TextFlow
    <Notes
    > # end of Notes
    <Para
      <Unique 1291794>
      <Pgf
       <PgfTag `Body'>
       <PgfUseNextTag No>
       <PgfNextTag `'>
       <PgfAlignment Right>
       <PgfFIndent  0.0">
       <PgfLIndent  0.0">
       <PgfRIndent  0.0">
       <PgfFIndentRelative No>
       <PgfFIndentOffset  0.0">
       <PgfTopSeparator `'>
       <PgfTopSepAtIndent No>
       <PgfTopSepOffset  0.0">
       <PgfBotSeparator `'>
       <PgfBotSepAtIndent No>
       <PgfBotSepOffset  0.0">
       <PgfPlacement Anywhere>
       <PgfPlacementStyle Normal>
       <PgfRunInDefaultPunct `. '>
       <PgfSpBefore  0.0 pt>
       <PgfSpAfter  0.0 pt>
       <PgfWithPrev No>
       <PgfWithNext No>
       <PgfBlockSize 1>
       <PgfFont
        <FTag `'>
        <FPlatformName `W.Arial.R.700'>
        <FFamily `Arial'>
        <FVar `Regular'>
        <FWeight `Bold'>
        <FAngle `Regular'>
        <FEncoding `FrameRoman'>
        <FSize  14.0 pt>
        <FUnderlining FNoUnderlining>
        <FOverline No>
        <FStrike No>
        <FChangeBar No>
        <FOutline No>
        <FShadow No>
        <FPairKern Yes>
        <FTsume No>
        <FCase FAsTyped>
        <FPosition FNormal>
        <FDX  0.0%>
        <FDY  0.0%>
        <FDW  0.0%>
        <FStretch  100.0%>
        <FLanguage USEnglish>
        <FLocked No>
        <FSeparation 0>
        <FColor `Black'>
       > # end of PgfFont
       <PgfLineSpacing Fixed>
       <PgfLeading  3.0 pt>
       <PgfAutoNum No>
       <PgfNumTabs 0>
       <PgfHyphenate Yes>
       <HyphenMaxLines 2>
       <HyphenMinPrefix 3>
       <HyphenMinSuffix 3>
       <HyphenMinWord 5>
       <PgfLetterSpace No>
       <PgfMinWordSpace 90>
       <PgfOptWordSpace 100>
       <PgfMaxWordSpace 110>
       <PgfMinJRomanLetterSpace 0>
       <PgfOptJRomanLetterSpace 25>
       <PgfMaxJRomanLetterSpace 50>
       <PgfMinJLetterSpace 0>
       <PgfOptJLetterSpace 0>
       <PgfMaxJLetterSpace 10>
       <PgfYakumonoType Floating>
       <PgfAcrobatLevel 0>
       <PgfPDFStructureLevel 5>
       <PgfLanguage USEnglish>
       <PgfCellAlignment Top>
       <PgfCellMargins  0.0 pt 0.0 pt 0.0 pt 0.0 pt>
       <PgfCellLMarginFixed No>
       <PgfCellTMarginFixed No>
       <PgfCellRMarginFixed No>
       <PgfCellBMarginFixed No>
       <PgfLocked No>
      > # end of Pgf
      <ParaLine
       <TextRectID 119>
       <String `Downblast Centrifugal'>
      > # end of ParaLine
    > # end of Para
    <Para
      <Unique 1291795>
      <PgfTag `Body'>
      <Pgf
       <PgfAlignment Right>
       <PgfFont
        <FTag `'>
        <FPlatformName `W.Arial.R.700'>
        <FFamily `Arial'>
        <FVar `Regular'>
        <FWeight `Bold'>
        <FAngle `Regular'>
        <FEncoding `FrameRoman'>
        <FSize  14.0 pt>
        <FUnderlining FNoUnderlining>
        <FOverline No>
        <FStrike No>
        <FChangeBar No>
        <FOutline No>
        <FShadow No>
        <FPairKern Yes>
        <FTsume No>
        <FCase FAsTyped>
        <FPosition FNormal>
        <FDX  0.0%>
        <FDY  0.0%>
        <FDW  0.0%>
        <FStretch  100.0%>
        <FLanguage USEnglish>
        <FLocked No>
        <FSeparation 0>
        <FColor `Black'>
       > # end of PgfFont
       <PgfLeading  3.0 pt>
      > # end of Pgf
      <ParaLine
       <String `Exhaust Ventilator'>
      > # end of ParaLine
    > # end of Para
    <Para
      <Unique 1291796>
      <PgfTag `Body'>
      <Pgf
       <PgfAlignment Right>
       <PgfFont
        <FTag `'>
        <FPlatformName `W.Arial.R.700'>
        <FFamily `Arial'>
        <FVar `Regular'>
        <FWeight `Bold'>
        <FAngle `Regular'>
        <FEncoding `FrameRoman'>
        <FSize  14.0 pt>
        <FUnderlining FNoUnderlining>
        <FOverline No>
        <FStrike No>
        <FChangeBar No>
        <FOutline No>
        <FShadow No>
        <FPairKern Yes>
        <FTsume No>
        <FCase FAsTyped>
        <FPosition FNormal>
        <FDX  0.0%>
        <FDY  0.0%>
        <FDW  0.0%>
        <FStretch  100.0%>
        <FLanguage USEnglish>
        <FLocked No>
        <FSeparation 0>
        <FColor `Black'>
       > # end of PgfFont
       <PgfLeading  3.0 pt>
      > # end of Pgf
      <ParaLine
       <String `Roof Mounted'>
      > # end of ParaLine
    > # end of Para
    <Para
      <Unique 1291797>
      <PgfTag `Body'>
      <Pgf
       <PgfAlignment Right>
       <PgfFont
        <FTag `'>
        <FPlatformName `W.Arial.R.700'>
        <FFamily `Arial'>
        <FVar `Regular'>
        <FWeight `Bold'>
        <FAngle `Regular'>
        <FEncoding `FrameRoman'>
        <FSize  14.0 pt>
        <FUnderlining FNoUnderlining>
        <FOverline No>
        <FStrike No>
        <FChangeBar No>
        <FOutline No>
        <FShadow No>
        <FPairKern Yes>
        <FTsume No>
        <FCase FAsTyped>
        <FPosition FNormal>
        <FDX  0.0%>
        <FDY  0.0%>
        <FDW  0.0%>
        <FStretch  100.0%>
        <FLanguage USEnglish>
        <FLocked No>
        <FSeparation 0>
        <FColor `Black'>
       > # end of PgfFont
       <PgfLeading  3.0 pt>
      > # end of Pgf
      <ParaLine
       <String `Belt Drive'>
      > # end of ParaLine
    > # end of Para
    > # end of TextFlow
    I don't see the red in there
    I made another pdf, after deleting the red bar (it's a eps.) and the reb boxes are still there
            I'm not using any master.
    Thanks for the advice anyhow    
    -Matt

Maybe you are looking for