Redeploy the Financial Reporting Web Application

Hello,
In one of the patch we have to apply, there is a step :
"Redeploy the Financial Reporting Web Application using the EPM configuration tool."
But when I go to the Weblogic server and run the EPM System Configurator, I expect to see "Financial Reporting Web Application"
Instead of this, I see "Reporting and Analysis" then "Deploy to Application Server"
Is it the same thing ?
Thanks

No, you must use the EPM configuration tool, if you go to Start->All Programs->Oracle EPM Systems->Foundation Services.
You will see the EMP Configuration tool wich it usually resides here:
%HYPERION_HOME%\common\config\9.5.0.0\configtool.bat
Once you run it you can follow the "on screen" instructions, it is pretty self explanatory.

Similar Messages

  • Hyperion Financial Reporting-Web Application service crashing

    Hi,
    In our environment in last one week this service has crashed 5times. What can be the reason for this? We have an EPM environment but HFM application is classic. The version we have is 11.1.2.2.305. When this happens we restart the services and they come up but again go down unexpectedly. Hyperion is installed on C drive itself and the databse size is close to 90GBs. Unable to understand what could eb causing this. Please help.

    FR web crash issue could be due to many reason :
    1. Is it crashing after running one particular report then that report could be big or has level 0
    2. If it is crashing due to any report then check jvm heap size for FR in FR windows server
    3. What does frloging.log and financialreporting0.log file says

  • Financial Reporting Web service Out of Memory (11.1.2.2.300)

    Financial Reporting web services runs out of memory. The JVM settings are currently set to 2048. The OS is windows 2008 64 bit.
    We have made the the following settings but it still does not help. The service would stay up for about 5 to 6 hours and then would go out of memory. We also see that there is a continuous activity in Financial reporting logs even when there are no users using the system.
    - Navigate to the following Windows Registry key on the server hosting the Financial Reporting web application component:
    HKEY_LOCAL_MACHINE\SOFTWARE\Hyperion Solutions\FinancialReporting0\HyS9FRReports
    - Export the above mentioned Windows Registry key for backup purposes,
    - Create a new "String Value" entry with following name and value:
    Name:JVMOptionY
    Value:-XXtlasize:min=4k,preferred=64k
    With Y being equal to (current value of JVMOptionCount) + 1
    - Create a new "String Value" entry with following name and value:
    Name:JVMOptionZ
    Value:-XXlargeObjectLimit:4k
    With Z being equal to (current value of JVMOptionCount) + 2
    - Increase the value of the JVMOptionCount parameter by 2
    - Restart the Financial Reporting web application component for the changes to be taken into account.
    [2013-06-10T05:33:38.950-04:00] [FinancialReporting0] [NOTIFICATION] [00088] [oracle.EPMFR.core] [tid: RMI TCP Connection(549)-] [userId: <anonymous>] [ecid: 0000JwfYJ1xDOdk5wzXBiW1HhI4I000000,1:25339] [SRC_CLASS: com.hyperion.reporting.security.impl.HsSecurityHelper] [APP: FINANCIALREPORTING#11.1.2.0] [SRC_METHOD: authenticateUser] External authentication successful for user: [Server0 on host ] succeeded in 13182 ms.
    [2013-06-10T05:34:18.404-04:00] [FinancialReporting0] [NOTIFICATION] [00088] [oracle.EPMFR.core] [tid: RMI TCP Connection(550)-] [userId: <anonymous>] [ecid: 0000JwfYJ1xDOdk5wzXBiW1HhI4I000000,1:25339] [SRC_CLASS: com.hyperion.reporting.security.impl.HsSecurityHelper] [APP: FINANCIALREPORTING#11.1.2.0] [SRC_METHOD: authenticateUser] External authentication successful for user: [Server0 on host ] succeeded in 26365 ms.
    [2013-06-10T05:34:45.424-04:00] [FinancialReporting0] [NOTIFICATION] [00088] [oracle.EPMFR.core] [tid: RMI TCP Connection(551)-] [userId: <anonymous>] [ecid: 0000JwfYJ1xDOdk5wzXBiW1HhI4I000000,1:25340] [SRC_CLASS: com.hyperion.reporting.security.impl.HsSecurityHelper] [APP: FINANCIALREPORTING#11.1.2.0] [SRC_METHOD: authenticateUser] External authentication successful for user: [Server0 on host ] succeeded in 13760 ms.
    [2013-06-10T05:59:50.634-04:00] [FinancialReporting0] [ERROR] [] [oracle.EPMFR.core] [tid: Thread-67] [userId: <anonymous>] [ecid: 0000JwfYJ1xDOdk5wzXBiW1HhI4I000000,1:25338] [SRC_CLASS: com.hyperion.reporting.connection.CleanConMgrThread] [APP: FINANCIALREPORTING#11.1.2.0] [SRC_METHOD: run] [[
    java.lang.OutOfMemoryError

    Financial Reporting web services runs out of memory. The JVM settings are currently set to 2048. The OS is windows 2008 64 bit.
    We have made the the following settings but it still does not help. The service would stay up for about 5 to 6 hours and then would go out of memory. We also see that there is a continuous activity in Financial reporting logs even when there are no users using the system.
    - Navigate to the following Windows Registry key on the server hosting the Financial Reporting web application component:
    HKEY_LOCAL_MACHINE\SOFTWARE\Hyperion Solutions\FinancialReporting0\HyS9FRReports
    - Export the above mentioned Windows Registry key for backup purposes,
    - Create a new "String Value" entry with following name and value:
    Name:JVMOptionY
    Value:-XXtlasize:min=4k,preferred=64k
    With Y being equal to (current value of JVMOptionCount) + 1
    - Create a new "String Value" entry with following name and value:
    Name:JVMOptionZ
    Value:-XXlargeObjectLimit:4k
    With Z being equal to (current value of JVMOptionCount) + 2
    - Increase the value of the JVMOptionCount parameter by 2
    - Restart the Financial Reporting web application component for the changes to be taken into account.
    [2013-06-10T05:33:38.950-04:00] [FinancialReporting0] [NOTIFICATION] [00088] [oracle.EPMFR.core] [tid: RMI TCP Connection(549)-] [userId: <anonymous>] [ecid: 0000JwfYJ1xDOdk5wzXBiW1HhI4I000000,1:25339] [SRC_CLASS: com.hyperion.reporting.security.impl.HsSecurityHelper] [APP: FINANCIALREPORTING#11.1.2.0] [SRC_METHOD: authenticateUser] External authentication successful for user: [Server0 on host ] succeeded in 13182 ms.
    [2013-06-10T05:34:18.404-04:00] [FinancialReporting0] [NOTIFICATION] [00088] [oracle.EPMFR.core] [tid: RMI TCP Connection(550)-] [userId: <anonymous>] [ecid: 0000JwfYJ1xDOdk5wzXBiW1HhI4I000000,1:25339] [SRC_CLASS: com.hyperion.reporting.security.impl.HsSecurityHelper] [APP: FINANCIALREPORTING#11.1.2.0] [SRC_METHOD: authenticateUser] External authentication successful for user: [Server0 on host ] succeeded in 26365 ms.
    [2013-06-10T05:34:45.424-04:00] [FinancialReporting0] [NOTIFICATION] [00088] [oracle.EPMFR.core] [tid: RMI TCP Connection(551)-] [userId: <anonymous>] [ecid: 0000JwfYJ1xDOdk5wzXBiW1HhI4I000000,1:25340] [SRC_CLASS: com.hyperion.reporting.security.impl.HsSecurityHelper] [APP: FINANCIALREPORTING#11.1.2.0] [SRC_METHOD: authenticateUser] External authentication successful for user: [Server0 on host ] succeeded in 13760 ms.
    [2013-06-10T05:59:50.634-04:00] [FinancialReporting0] [ERROR] [] [oracle.EPMFR.core] [tid: Thread-67] [userId: <anonymous>] [ecid: 0000JwfYJ1xDOdk5wzXBiW1HhI4I000000,1:25338] [SRC_CLASS: com.hyperion.reporting.connection.CleanConMgrThread] [APP: FINANCIALREPORTING#11.1.2.0] [SRC_METHOD: run] [[
    java.lang.OutOfMemoryError

  • Error while running the financial report in the workspace.

    Hi,
    Im getting the below error while running the financial report in the workspace in HTML mode.
    *"Required application module reporting.HRRunDlg is not configured. Please contact your administrator".*
    And im not able to login to the Hyperion Financial Reporting as well.. i get the below error
    *"You are not authorized to use this functionality. Contact your administrator"*
    Can someone let me know how to resolve this error.

    You don't mention the version, what app server or web server you are using, etc.. That information might be helpful, but in general, you can try the following:
    1. Make sure you have gone through the FR Web App deployment steps and verify the settings entered in the Config Tool.
    2. For version 11.1.1.x and 9.3.1.x, try opening the report in FR Studio and running it via the FR Studio Print Preview (*bold*not*bold* Web Preview.) If the report runs/processes, then the back-end FR Services are functioning and the issue is confined to the web interface. Verify the FR Web App is up and listening on the designated port (8200, by default), check the FR Web App logs and the App Server (WebLogic, WebSphere, Tomcat, OAS) logs for errors/issues.
    If the report fails to process in FR Studio Print Preview, then there is a problem with the FR Reporting Server Service. Check to make sure the service is up/functioning and check the FR Report Server logs for errors.
    3. Test access to other FR functionality in workspace (ex: Files->Preferences->Financial Reporting or Explore->Tools->Database Connection Manager?) If these don't work, then try to connect to the following URLs:
    http://workspaceServer:19000/hr/status.jsp
    http://frWebAppServer:8200/hr/status.jsp
    Note: The URLs above assume standard/default ports. You may need to adjust them for your environment.
    If the first URL fails, but the second URL works, there is a problem with the HTTP redirect settings on the Web Server (Apache, IIS, etc.) Run through the Workspace deployment and make sure the Web Server Config settings point to the right ports/servers.

  • Financial Reporting Web Server can't find report server.

    Hi all,
    I've installed Financial reporting print server, report server, and scheduler on a separate server from the Web Server installed with Workspace. I can create and run a report with FR Studio and have saved it to the Workspace server.
    When I run the report on the Workspace server I get the following error:
    Your Financial Reporting Web Server is unable to locate the report server server1.na.ds.monsanto.com:8299. Please contact your administrator.
    (5514)
    I have the same configuration on two other servers and things are working fine. How do I tell the Web Server (server1) where the report server is. Why is it looking on the server1 server?
    Thanks.

    Thanks for your responses.
    I've run the configuration utility on the server where I have installed the report server and compared it to the report server that works. I looks like logically I have things set up correctly.
    The "Configure Financial Reporting" asks me where the "Workspace Web Application" is and that is set correctly and is working because I can get into studio and connect to the report server it lets me design and run and save the report. Studio saves the report to the correct workspace server so I know FR knows about the workspace server.
    I ran the config utility on the Workspace web server and selected "Configure Web Server". The second screen lists all of the components and "Financial Reporting" is one of the components. This is also set up logically identically to the server pair that is working. All of the components are set up on the web server to point at the web server.
    So I still don't understand how to tell workspace to look at the report server. The report server is finding the workspaces web server just fine.
    All services are up and running.
    Keith

  • Canceling Financial Reports Crashses The Financial Reports Server

    Hello Gurus -
    We have a couple of financial reports(11x version) for one of the ASO cube (11x essbase version).
    We are noticing that when the users run the reports and then hit "Cancel" button it actually ends up in crashing the Financial Reports Server. So, far we have asked teh users to not to cancel the reports. But we were wondering if anyone else is facing similar issue and possibly have a workaround or a solution?
    Appreciate any suggestions/help.
    Regards

    Ouch, drilling to level 0 from where the user chooses, is a hard task.
    It may be time to review the user requirements and the determine if another method might be more useful - either different reports or reports with expansion allowed.
    For example if they are reviewing all of their cost centers to see which ones are above/below target - maybe think about reports which show the highest above/below, or even think about using Web Analysis to present a drill-able dashboard for users.
    If they are keen on having the same report, you could look at changes to the store/dynamic calc/aggregations. Although to do it based on one report requirement could cause issues elsewhere.

  • Please allow more than 13 digits in the financial report calculation

    Dear SAP development team,
    I would like to suggest the financial report programming code or query or what else that is used to generate the financial reports (TB;P&L;BS) could allow the calculation of debit or credit more than 9223372036854. It made me laugh that it is not allowed.
    Why I said so ? Here are the reasons:
    1. The report data is not stored on a specific table
    2. If the report has calculated debit or credit greater than 9223372036854 while report processing is taking place, the report should still be appears but the amount of debit or credit that greater than 9223372036854, please put the zero on the debit or credit.
    I expect that we could still use the report either money overflow happened.
    John

    Hi, Yang
    My colleagues came across that problem recently. I advised them to split the transaction and create several transaction instead thereby avoinding using more than 13 digits.
    Another way that came to my mind is to create a new currency with excnage rate (say) 1:1000 . And create the transaction using this currency.
    Can't say that both solutions are perfect but I am afraid these are only ones.
    Konstantin.

  • Could not start the hyperion workspace-web application Error 1067

    Hi,
    I have installed hyperion from scratch in a distributed environment...everything was working fine.......i.e. shared services, workspace, essbase, sql server, and hfm. I was able to logon and navigate different options in the hyperion products...but essbase stopped working when I re-started all four servers ....?
    (1) When I restarted all four servers and stopped and restarted all hyperion services as per giving sequence then everything works fine but essbase EAS console and workspace web console...i was getting error message " could not connect to administration server" whenever i try to connect EAS console to essbase then I went to services there I saw workspace agent and workspace web application service is down.
    (2) as soon as I started those both services then my shared services automatically stopped but I was able to logon in Essbase console and workspace console but my shared services are down...
    (3) as soon as I start shared service they started but my workspace agent and workspace web application automatically stopped...and when I try to start again workspace web application then I get this error "[ Could not start the hyperion workspace-web application services on local computer. Error 1067: the process terminated unexpectedly]"
    I have been searching online and googling but have a hard luck to get some best solution for this...can some one help me or guide me to walk through with this issue...
    Thank you very much in advance ...
    Regards,
    Safi

    I solved this issue...It was with Hyperion Services those were stop responding some how.....but I stopped each service and restarted then those started working again...
    Regards,
    Safi

  • How to to display the JSP report in Application Server ? URL for displaying

    Hi Experts,
    Last week, we tried to change the memory of Response Cache and buffer Cache to increase the speed of the Excel report. But it didn’t work out.
    And from the below link, I understood we can convert the oracle 9i report to excel by converting the Oracle 9i report to JSP report.
    http://www.oracle.com/technology/products/reports/htdocs/getstart/demonstrations/index.html
    I’ve converted the Oracle 9i report to JSP report and finding the way to display the JSP report using Application Server. I am trying to find out the REPORT URL of simple JSP report and using Reports Servlet . Right now I am trying to display the JSP report in Application Server.
    Please suggest the URL for displaying the JSP report
    Thanks & Regards

    Hi,
    You can directly call you .jsp file, http://<host>:<domain>:<port>/<jsp report path>?userid=<if your report requires userid>/<pwd>
    Refer to metalink documents:
    Frequently Asked Questions About JSP Reports [ID 301714.1]
    Here --> Question 4. How do I execute a JSP report?
    Also refer, How to deploy JSP reports [ID 220943.1]
    Hope this helps.
    Regards,
    Mithun

  • Why does the BLOCK REPORTED WEB FORGERIES become disabled when I close Firefox?

    I will enable the BLOCK REPORTED WEB FORGERIES in the control panel, however if close and then open Firefox it will be disabled.

    At the moment I use Norton 360. I have Norton on other machines and it does not turn off the Block Attack Sites nor Block Reported Web Forgeries. My first thought is that I have been breached and Malicious Code is the culprit.

  • Proxy error while running the financial report in workspace.

    Hi,
    We are using the Hyperion financial reporting 9.3.1 with Essbase as a data source.
    While running a report in workspace, we are getting the 'Proxy error' meassage, which is following-
    "<!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN">
    '<html><head>
    <title>502 Proxy Error</title>
    </head><body>
    Proxy Error
    <p>The proxy server received an invalid
    response from an upstream server.<br />
    The proxy server could not handle the request <em><a
    href="/hr/modules/com/hyperion/reporting/web/reportViewer/HRRunJob.jsp">GET /hr/modules/com/hyperion/reporting/web/reportViewer/HRRunJob.jsp</a></em>.<p>
    Reason: <strong>Error reading from remote server</strong></p></p>
    </body></html>"
    Do anybody have any idea on this? Any help will be appriciated on this.
    Thanks & Regards,
    Mohit Jain

    Hi Iain,
    We are using Microsoft Internet explorer 6.0. I am not sure about the 'proxy' (As we don't have any proxy setting in Tool--> Internet options--> connection--> LAN setting). We are accessing the Workspace and FR studio via Citrix application. How can I check the proxy.
    Also, I noticed one more point, Report has prompt for seleting 'Account hierarchy'.If we run the report only for one account hierarchy, report is returning the data but while running for multiple account hierarchy, it is throwing the 'Proxy error' as memtioned above.
    Please help us on this.
    Thank & Regards,
    Mohit

  • URL link in rows/colomns of a report web application designer.

    Hi,
    I would like to create a URL link in a report which jumps to documents on livelink.
    For example:
    1.  bw    30.000    www. google.nl
    2.  sap   40.000    www. sap.com
    3. basis  50.000   www. nu.nl
    etc.
    etc.
    Do all the rows have different URLS, is that possible in the web application designer? Or do I have to use RRI? Or a user exit?
    Thanks for your help en replies.
    Rishma.
    Edited by: R. Debi on Oct 7, 2010 11:20 AM

    I used the RRI already but would like to have a hyperlink in the report. (So, the prefix of the URL is always the same an I have put this in RRI and used the & and contract ID as dynamic part of the URL.)
    In a BW web report, our customer would like to display a characteristic value as a hyperlink, so that when clicking on the link, the user is taken to an external website holding a document.  SO I am just looking for a javascript perhaps? Or maybe even abap in transformation? To actually create the hyperlink in this report.
    Thanks a lot,
    Rishma

  • Report to Report - Web Application Designer

    I have created a simple template using BEx Web Application Designer. The Query I've picked is set up with receiver reports. e.g. I want to do a report to report interface from the data in my template to another query and another template. However when I choose Goto on the data and select the query I want it opens the data but opens it using a template I havent created. A standard template? How do I get the query I go to to open with one of my templates? Do I have to do some linking somewhere?

    Hello Joel,
    Have you put your new template in 'Set standard web templates'?
    Txn rscustv27?  this may not work but it is worth a try. u would need to put it in the bottom option.
    Another way to do this would be to create an iview for each query and in the the query properties you can assign what template you will use under 'bex web application query string'.  The iView properties can be found in the Portal Content Directory.  i think this will definatley work.
    Also one other thing to look at in WAS is the RRI options (in the properties of the web template).  This may have something in there.
    Enjoy your friday.....
    Nick.

  • Cross Farm: User Profile Custom Properties do not show up in the consumer farm web applications

    I have a two SharePoint 2010 farms, one is the publishing farm and user profile service is running on this farm. I have defined a couple of new custom properties, and after a while these custom properties do not show up at the consumer farm end.
    So, on the publishing farm, I can udpate the user profiles with values in these custom properties. However, neither the custom properties nor the values got synchronized to the consumer farm. What puzzled me further is that some of the existing custom properties
    exist on the consumer farm, but not the new custom properties I recently added.
    1. I have made sure the application pool accounts on both the farms being added to the administrators with full control permission in UPS on the publishing farm.
    2. The User Profile Service proxy (connected to the publishing farm UPS application)  is associated with all the web applications on the consumer farm.
    3. When values in the user profiles on the publishing farm changed, these changes do not get replicated to the consuming farm user profiles. This symptom occurs on both custom and OOB user profile properties.
    However, I cannot find any other related information on the web, nor from the ULS logs.

    Hi,
    As I understand, it did not display the new custom properties you defined in the publishing farm at the consumer farm end.
    1. Check if the topology Discovery Service Application runs well in consuming farm. In the Central Administration, it is the Application Discovery and load Balancer Service Application, check if it starts.
    In the IIS, it is the topology, check if it starts.
    2. Check the permissions have been established if you have established consumer farm permissions on Provider Farm before you publish the service application.
        1. Go to Central Administration and going to “Manage Service Applications”.
        2. Click on “Application Discovery and Load Balancer Service Application” and click “Permissions” from the ribbon.
    Your farm GUID should be listed with full permissions.
    The article is about Shared Service Architecture in a multi farm environment
    http://blogs.msdn.com/b/russmax/archive/2010/05/06/sharepoint-2010-shared-service-architecture-part-2.aspx
    Best regards
    Sara Fan
    TechNet Community Support

  • Error on the installation of Web Application Server Java 6.40 SP9 on my PC

    Hi, All,
    I got the following error when I try to install Web Application Server Java 6.40  SP9 on my laptop using the CD that comes with the Book 'Java Programming with the SAP Web Application Server'. I'm currently using window XP.
    The installation failed on the 3rd step 'SAP System Installation'.
    I logged on my laptop as my own userid, but I should have the administrator's rights.
    ERROR 2007-05-15 15:43:10
    FSL-00001 System call failed. Error 2 (The system cannot find the file specified.
    ) in execution of system call 'LoadUserProfile' with parameter (thread token for IT-899\j2eadm, j2eadm), line (616) in file (synxccuren.cpp).
    Do you have any ideas what it means?  Any inputs would be greatly appreciated.
    Joanna

    Thank you all for your replies.  I downloaded the newest version of Netweaver from the SAP website and got it installed successuflly.  Points rewarded...Thanks.
    Joanna

Maybe you are looking for

  • Reinstalling the iTunes that I liked

    I use computers, but I don't claim to understand how they work, so please excuse what may seem like a dumb question. I liked Snow Leopard more than Mountain Lion (the missing scroll arrows) and the older version of iTunes more than the current one, a

  • Change the cardinality of a database diagram

    Is it possible to change the cardinality in the database diagram. I tried double clicking the lines etc nothing worked. the default that comes up when i put a foreign key is not always right.

  • TM quits with Error Code (-36)

    I am having problems getting Time Machine to work. I am currently using a Mac Mini, (Intel), connected to an external FireWire drive. I have reformatted the drive using the GUID Partition Map as I have read others suggest. When I initiate the backup

  • Vista users can't see my flash

    I've got quite a number of clent websites out there with flash headers. Some clients are now telling me that they can't see the flash headers at the top of their websites. If the flash if farther down on the page they can see it. We're using exactly

  • Problem migrating Iphoto library to Photos

    installed 10.10.3 and Photos will not recognize (grayed out) when I attempt to import my pics from iphoto (v9.6.1) In Photos preferences it knows that my Iphoto library (on an internal drive that is not my boot drive) but that is grayed out as well.